Bandelin SONOREX KT 30 basket carrier for ZE

The Bandelin SONOREX ZE 1031 is a built-in ultrasonic bath designed for under-counter installation: The TE 1031 oscillating tank holds 29.0 l; the GT 503 M-C generator is a separate unit; and operation is controlled via the ST 15.1 control unit using a single rotary knob.Tank and installationThe internal dimensions are 510 x 300 mm with a depth of 200/220+ mm; the tank base is sloped and the corners are rounded. The material is 1.4404 stainless steel with a thickness of 2.0 mm. A fill level mark assists with filling; the working capacity is 20.0 out of 29.0 l. The tank has a 1½-inch beaded edge for drainage. The external dimensions of the oscillating tank are 570 x 360 x 270/290 mm, and the degree of protection is IP 30. The permissible ambient temperature is 5 to 40 °C.Install the generator and control unit separatelyThe GT 503 M-C ultrasonic generator is housed in a separate, painted aluminium casing measuring 360 x 310 x 142 mm, with an IP 20 protection rating and a mounting bracket for vertical installation. A 2 m long connection cable with an AMP-CPC plug connects it to the tank; the mains cable is permanently attached to the ST 15.1 control unit. The generator supplies eight vibration systems on the base with a rated power of 300 watts; the peak power is 1,200 watts and the frequency is 35 kHz.Operation via rotary knobThe ST 15.1 sets the time from 1 to 15 minutes (± 5 %) or switches to continuous operation. It also features the pulse function and Sweep, the SweepTec automatic frequency control. If you wish to monitor the bath temperature or use DEGAS, choose the SONOREX ZE 1031 DT: it features the same TE 1031 bath and the same generator, but comes with the ST 30.1 DT control unit, which includes a temperature sensor and temperature display.Position within the SONOREX ZE rangeThe 29-litre tank is available in two power ratings. The ZE 1031 has a peak power output of 1,200 watts and eight vibration systems on the base. The SONOREX ZE 1032, with the same tank volume, has 1,760 watts, a wider oscillating tank and an additional four vibration systems on the side. Larger tanks with a capacity of 46 l are the ZE 1058 and the ZE 1059.Accessories for the TE 1031 tankThere are several parts to choose from for operation. The K 29 EM insert basket hangs in a basket holder; the KT 30 and KT 30 Z models are available with handles. The SM 29 silicone studded mat is supplied in a set of two when ordered. The D 30 lid or the D 1031 G hinged lid are available as covers, and the G 1 ½ Type V drain fitting fits the groove in the bath base. The KW 28-0 drop-in bath with lid is another accessory. The FT 36 film test frame is already included with the bath.Typical applicationsCleaning of medical instrumentsCleaning of particularly sensitive micro-instruments using the Sweep automatic frequency controlCleaning stations where the bath is permanently installed rather than simply placedFrequently asked questionsIs the generator included in the scope of delivery?Yes, the GT 503 M-C ultrasonic generator is included, as are the ST 15.1 control unit and the 2-metre-long connection cable to the generator.Does the bath display the temperature?The temperature sensor, temperature display and overtemperature warning are part of the ST 30.1 DT control unit in the DT version. The ST 15.1 control unit for this model sets the time and continuous operation.What power supply is required?230 V~ (± 10 %) at 50/60 Hz. The current consumption is 1.4 A.Does it come with a cover?No. The D 30 cover and the D 1031 G hinged cover are accessories and are ordered separately.Technical detailsCapacity / Working capacity29.0 l / 20.0 lInternal dimensions of the tank (L x W x D)510 x 300 x 200/220+ mm, sloping base, rounded cornersExternal dimensions of oscillating tank (L x W x H)570 x 360 x 270/290 mmOscillating tankTE 1031, stainless steel 1.4404, thickness 2.0 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, rated power 300 W, 8 vibration systems on the baseUltrasonic generatorGT 503 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepDrainFlange 1 ½ inchesLevel markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption1.4 A (230 V), 2.8 A (115 V)Degree of protection, oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight16.7 kg / 20.3 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1031 oscillating tankGT 503 M-C ultrasonic generatorControl unit ST 15.1Film test frame FT 362 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket holder, lid, drop-in bath, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceFor the SONOREX SW 31 Z built-in rinsing basin, additional accessories or another model in the range, individual procurement requirements apply. You can request a quote via our procurement service.

The Bandelin SONOREX ZE 1032 utilises both bottom and side ultrasonic transducers: in addition to the eight transducers at the bottom of the TE 1032 tank, there are four on the side. This built-in ultrasonic bath, designed for under-counter installation, has a capacity of 29.0 l and a peak power output of 1,760 watts.TwinSonic: sound from below and from the sideBandelin describes TwinSonic as a combination of bottom and side sound waves, which distributes the sound waves throughout the bath and reduces dead zones without the basket having to oscillate. In the TE 1032, this comprises twelve vibration systems, powered by the GT 504 M-C ultrasonic generator with a rated power of 440 watts. The frequency is 35 kHz. Added to this are the pulse function and sweep, as well as the SweepTec automatic frequency control, which is designed for particularly sensitive micro-instruments.Tank and structureThe tank measures 510 x 300 mm internally, with a depth of 200/220+ mm. The base is sloped, the corners are rounded, and the drain is located in a 1½-inch bead. The 1.4404 stainless steel is 2.0 mm thick. Externally, the oscillating tank measures 570 x 404 x 270/290 mm, i.e. 404 mm wide compared with 360 mm for the ZE 1031. Of the 29.0-litre capacity, 20.0 l are available as working volume; a fill level mark is provided.The generator is housed in its own aluminium casing with mounting brackets for vertical installation; it measures 360 x 310 x 142 mm and is rated to IP 20. It is connected to the tank via a 2-metre-long connection cable with an AMP-CPC plug.Operation via rotary knobThe ST 15.1 control unit has a rotary knob for setting times from 1 to 15 minutes (± 5 %) and a setting for continuous operation. The ST 30.1 DT control unit for the SONOREX ZE 1032 DT, which otherwise uses the same bath and generator, features a temperature display.ZE 1032 or ZE 1031The SONOREX ZE 1031 has the same tank size, but only bottom transducers and 1,200 watts peak power. The ZE 1032 has 560 watts more peak power and four side transducers. If you want side-wave sound and the higher power, go for the ZE 1032. If bottom sound and 1,200 watts are enough for you, you can stick with the ZE 1031.Basket, lid and foil testThe bath is supplied without a basket. The K 29 EM insert basket can be fitted into the KT 30 basket holder or the KT 30 Z with handles. The D 30 lid and the D 1031 G hinged lid are available as covers, whilst the SM 29 silicone studded mat (sold in a pack of two) is provided for the base. The FT 36 foil test frame is included in the kit. The G 1 ½ Type V drain fitting belongs to the bead in the tank base. During operation, the permissible ambient temperature is between 5 and 40 °C.Typical applicationsCleaning of medical instrumentsCleaning of sensitive micro-instruments with sweepUltrasonic cleaning of items where acoustic shadows would be a problemFrequently asked questionsHow many vibration systems does the tank have?Twelve, eight at the bottom and four on the side.Does the ZE 1032 have DEGAS?No, DEGAS rapid degassing is a feature of the DT version with the ST 30.1 DT control unit.What is the current consumption?2 A at 230 V~ (± 10 %), 50/60 Hz.Technical detailsUltrasonic frequency35 kHzUltrasonic powerPeak power 1,760 W, rated power 440 WVibration systems8 at the base, 4 on the sideUltrasonic generatorGT 504 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepCapacity / Working capacity29.0 l / 20.0 lInternal dimensions of tank (L x W x D)510 x 300 x 200/220+ mm, sloping base, rounded cornersOscillating tankTE 1032, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)570 x 404 x 270/290 mmDrain1½-inch beadLevel markingsYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2 A (230 V)Degree of protection of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight19.0 kg / 22.6 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ComplianceLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1032 oscillating tankGT 504 M-C ultrasonic generatorControl unit ST 15.1Foil test frame FT 362 m connection cable (AMP-CPC plug) for the generatorInsert basket, basket support, lid, hanging tray, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceFor the KW 28-0 hanging tray, additional accessories or another model in the range, individual procurement requirements apply. You can request a quote without obligation via our procurement service.

With a built-in ultrasonic bath, the control unit determines the extent to which settings can be adjusted and monitored. The Bandelin SONOREX ZE 1031 DT features the ST 30.1 DT control unit, which includes push-button controls, a temperature sensor, a temperature display and an over-temperature warning. Beneath this is the TE 1031 oscillating tank, with a capacity of 29.0 l, designed for under-counter installation.ST 30.1 DT control unitThe time can be selected from eight fixed settings: 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); alternatively, the bath can run in continuous operation. Functions include the pulse function, sweep and the DEGAS rapid degassing function for freshly prepared liquids. The temperature sensor provides the readings for the display; the control unit issues a warning in the event of an overtemperature. The bath switches off automatically after 12 hours.TE 1031 bath and generatorThe internal dimensions are 510 x 300 mm with a depth of 200/220 mm; the base is sloped and the corners are rounded. The material is 1.4404 stainless steel with a thickness of 2.0 mm. Eight vibration systems on the base are powered by the GT 503 M-C ultrasonic generator: 300 watts rated power, 1,200 watts peak power, 35 kHz. The generator has its own aluminium housing (360 x 310 x 142 mm, IP 20) with a mounting bracket for vertical installation. A 2 m long connection cable leads to the tank.Of the 29.0-litre capacity, 20.0 l is the working volume; a level mark indicates the fill level. The drain is located in a 1½-inch bead. The oscillating tank measures 570 x 360 x 270/290 mm externally and has an IP 30 protection rating.The difference compared to the ZE 1031 with a rotary handleThe mechanics and performance of the SONOREX ZE 1031 are the same; the tank and generator are identical. The ZE 1031 features the ST 15.1 control unit with a rotary knob and timers ranging from 1 to 15 minutes. The DT version also features a temperature display, DEGAS and a 30-minute timer setting. If you need to keep an eye on the bath temperature, choose the DT. If you only need times up to 15 minutes, the rotary knob will suffice. The SONOREX ZE 1032 DT offers higher sound power and additional side oscillators whilst maintaining the same tank volume.Installation notesThe bath and generator are separate units; the 2-metre length of the connection cable determines the distance between them. The generator has degree of protection IP 20 and is mounted vertically using the mounting bracket; the oscillating tank has IP 30. These ratings should be taken into account when planning the installation location, as must the permissible ambient temperature of 5 to 40 °C. The FT 36 film test frame is included with the kit.Typical applicationsCleaning of medical instruments with controlled timing and visible bath temperatureGentle cleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionDegassing of freshly prepared cleaning fluid prior to the actual cleaning cycleFrequently asked questionsHow long can the bath run continuously?The automatic safety shut-off activates after 12 hours, even during continuous operation.Is the temperature sensor included in the scope of delivery?Yes, it is supplied as part of the ST 30.1 DT control unit.What is the mains connection specification?230 V~ (± 10 %) at 50/60 Hz; the current consumption is 1.4 A. The mains cable is permanently attached to the unit.Technical detailsControl unitST 30.1 DT with buttons, temperature sensor, temperature display, over-temperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursCapacity / Working volume29.0 l / 20.0 lInternal dimensions of tank (L x W x D)510 x 300 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1031, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)570 x 360 x 270/290 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, rated power 300 W, 8 vibration systems on the baseUltrasonic generatorGT 503 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationDrainBead 1 ½ inchesLevel markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption1.4 A (230 V), 2.8 A (115 V)Degree of protection, oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight16.7 kg / 20.3 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1031 ultrasonic bathGT 503 M-C ultrasonic generatorControl unit ST 30.1 DT with temperature sensorFilm test frame FT 362 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, hanging tray, studded mat and drain fitting are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 29 EM insert basket, the KT 30 and KT 30 Z basket supports, the D 30 lid, the D 1031 G hinged lid, the KW 28-0 hanging tray, the SM 29 studded mat, the G 1 ½ Type V drain fitting or the SW 31 Z built-in rinsing tray, individual procurement is required. You can request a quote for accessories and other models in the SONOREX ZE range, with no obligation, via our procurement service.

In the 29-litre class of the SONOREX ZE range, the Bandelin SONOREX ZE 1032 DT offers the highest ultrasonic power, which the ZE 1032 also has, and the control unit with the most functions. This built-in ultrasonic bath for under-counter installation combines 1,760 watts of peak power and TwinSonic technology with the ST 30.1 DT control unit, which displays the temperature and features an overtemperature warning.1,760 watts across twelve vibration systemsThe GT 504 M-C ultrasonic generator delivers 440 watts of nominal power and up to 1,760 watts of peak power at 35 kHz. This power is distributed across eight vibration systems at the base of the TE 1032 tank and four on the side. Bandelin calls this principle ‘TwinSonic’, which is designed to reduce acoustic dead zones without causing the basket to oscillate. The generator is housed in an aluminium casing with IP 20 rating, measuring 360 x 310 x 142 mm, and features mounting brackets for vertical installation. The connection cable to the tank is 2 m long.Control unit with temperature sensorUsing the buttons on the ST 30.1 DT, you can select one of eight time settings (1, 2, 3, 4, 5, 10, 15 or 30 minutes, ± 5 %) or continuous operation. You can also select the pulse function, sweep and DEGAS rapid degassing. The display shows the bath temperature; the controller issues a warning in the event of overtemperature and switches off automatically after 12 hours.The tankInternal dimensions 510 x 300 mm, depth 200/220 mm, sloping base, rounded corners: these are the specifications of the TE 1032 tank. The 1.4404 stainless steel is 2.0 mm thick. The working capacity is 20.0 l, the total capacity is 29.0 l, and there is a fill level mark. Externally, the oscillating tank measures 570 x 404 x 270/290 mm and has an IP 30 protection rating. The drain is located in a 1½-inch bead.Which of the four 29-litre models?The ZE 1031 has bottom ultrasonic waves, 1200 watts and the ST 15.1 rotary handle control.The ZE 1031 DT has the same power output as the ZE 1031, but features the ST 30.1 DT control.The ZE 1032 has bottom and side ultrasonic waves with 1,760 watts and the rotary handle.The ZE 1032 DT combines bottom and side ultrasonic cleaning with the ST 30.1 DT control unit.If you need to monitor the bath temperature or work with DEGAS when cleaning medical instruments, the 1032 DT is suitable. For time-only control, the ZE 1032 is sufficient.Typical applicationsCleaning of medical instrumentsIntensive yet gentle cleaning of sensitive micro-instruments using the automatic sweep frequency functionUltrasonic cleaning with bottom and side ultrasonic waves (TwinSonic)Degassing of freshly prepared solution using DEGASFrequently asked questionsDo I need to order a temperature sensor separately?No, it is included in the scope of delivery for the ST 30.1 DT control unit.How much space do I need for the tank and generator?The ultrasonic tank measures 570 x 404 x 270/290 mm externally, and the generator measures 360 x 310 x 142 mm. Both are connected via a 2-metre-long cable.How much does it weigh?19.0 kg net, 22.6 kg gross when shipped in a carton measuring 670 x 470 x 565 mm.Technical detailsCapacity / Working capacity29.0 l / 20.0 lInternal dimensions of tank (L x W x D)510 x 300 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1032, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)570 x 404 x 270/290 mmDrainBead 1½ inchLevel markingsYesUltrasonic frequency35 kHzUltrasonic powerPeak power 1,760 W, nominal power 440 WVibration systems8 at the base, 4 on the sideUltrasonic generatorGT 504 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 30.1 DT with push-buttons, temperature sensor, temperature display, overtemperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursOperating voltage230 V AC (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2 A (230 V)Protection rating of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight19.0 kg / 22.6 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ComplianceLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1032 oscillating tankGT 504 M-C ultrasonic generatorControl unit ST 30.1 DT with temperature sensorFilm test frame FT 362 m connection cable (AMP-CPC plug) to the generatorBasket, basket support, lid, insert tank, studded mat and drain fitting are not included.Individual requirements and procurement serviceFor the K 29 EM insert basket, the KT 30 and KT 30 Z basket supports, the D 30 lid, the D 1031 G hinged lid, the KW 28-0 insert tank, the SM 29 studded mat or the G 1½ Type V drain fitting, individual procurement is required. You can request a quote via our procurement service, as well as for any other model in the SONOREX ZE range.