Skip to main content Skip to search Skip to main navigation

IKA T 25 easy clean control ULTRA-TURRAX disperser, 3,000 to 25,000 rpm, with temperature measurement, 0025002500

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA T 25 easy clean control ULTRA-TURRAX disperser, 3,000 to 25,000 rpm, with temperature measurement, 0025002500"

The T 25 easy clean control ULTRA-TURRAX uses an RFID-enabled tool to measure the sample temperature, thereby monitoring heat-sensitive formulations. A dispersing tool is not supplied with the drive unit; it is selected from the relevant tool range to suit the temperature measurement function.

Temperature measurement and tool recognition via RFID

Using a tool fitted with a temperature sensor, the unit measures the sample temperature within a range of 0 to 125 °C, with a resolution of 0.1 Kelvin and an accuracy of ±1 Kelvin. The unit monitors the temperature continuously with an adjustable limit, whilst the tool simultaneously records its operating hours via RFID, which simplifies maintenance planning. In addition to the standard tool, the range of accessories includes further variants with temperature sensors in diameters of 18 and 25 millimetres, as well as a flat version.

Easy-clean cleaning without dismantling

As with the digital version, the tool on the control model can be opened for cleaning without dismantling the entire rotor-stator unit. The brushless DC motor runs at 70 dB(A) without a tool fitted, making it comparatively quiet and free from carbon dust. All dispersing tools in the S-25 series are compatible with this drive unit; even classic tools without temperature sensors can be used with it for tasks where temperature measurement is not a factor.

Operation, remote control and connection

The speed is continuously adjustable between 3,000 and 25,000 revolutions per minute via an LED display, whilst a timer manages recurring process times. In addition to operation via the unit itself, the T 25 easy clean control can be controlled using the optional WiCo remote control, which is not included in the scope of delivery. A micro-USB interface connects the unit to labworldsoft; it operates on a mains supply of 220 to 240 volts, or 100 to 120 volts on request for locations outside Europe. The housing is protected to IP 30 in accordance with DIN EN 60529 and is designed for a 100 % duty cycle at a permissible ambient temperature of 5 to 40 °C.

Documentation and conformity

As with the digital version, a separate EU Declaration of Conformity is available for download for this drive unit, along with a dedicated data sheet. The operating instructions are shared with the digital version and are available in 14 languages.

Typical applications

The temperature monitoring feature makes the unit particularly suitable for applications where samples may be damaged by excessive heating.

  • Dispersion of heat-sensitive pharmaceutical and cosmetic formulations
  • Processes requiring documented maintenance via RFID operating hours recording
  • Homogenisation where a fixed temperature limit must be maintained
  • Remote control via WiCo for applications in a fume hood

Selection guide: control, digital or Set?

If temperature measurement is not required, the more affordable T 25 easy clean digital ULTRA-TURRAX is usually sufficient. Those who do not yet own a temperature-measuring tool will find the T 25 easy clean control Solution to be the suitable complete set, comprising the tool, stand and boss head. For more compact, networked applications with Wi-Fi and Ethernet, the standalone T 25 mini control Solution is available; it covers smaller volumes at lower power. For higher volumes with a more powerful drive, but without temperature measurement, the T 25 digital ULTRA-TURRAX is suitable.

Technical details

The following table summarises the key specifications for the drive, temperature measurement and connections, as specified by IKA for the ‘control’ variant of the T 25 easy clean series.

Motor power input / output500 W / 400 W
Processable volume (H₂O)1 to 2,000 ml
Max. viscosity5,000 mPas
Speed range3,000 to 25,000 rpm, continuously variable (2 % deviation)
Speed displayLED
Motor typebrushless, direct current
Noise level without tools70 dB(A)
Support arm diameter / support arm length13 mm / 160 mm
TimerYes, LED display
Permissible duty cycle100 %
Permissible ambient temperature / humidity5 to 40 °C / 80 %
IP ratingIP 30 in accordance with DIN EN 60529
USB interfaceMicro-USB
Connected load220 to 240 V, 50/60 Hz, 500 W (alternative voltage option: 100 to 120 V)
Temperature measurement range0 to 125 °C
Temperature measurement resolution0.1 K
Temperature measurement accuracy±1 K
Dimensions (W x H x D)89 x 270 x 161 mm
Weight3 kg

Scope of delivery

  • T 25 easy clean control ULTRA-TURRAX drive unit
  • USB cable, USB A to Micro-B, 2 m

A dispersing tool and the WiCo remote control are not included in the scope of delivery and must be ordered separately if required.

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our Environment and Disposal page.

Warranty and procurement service

The IKA manufacturer’s warranty applies to the T 25 easy clean control ULTRA-TURRAX: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For dispersing tools with temperature sensors, stands or the WiCo remote control, our procurement service will handle the assembly.

Certification marks: NRTL (TÜV SÜD, USA/Canada)
Display type: Digital
Max. speed: 25,000 rpm
Power supply: Mains operation
Supply form: Single unit
Volume range: 1 ml - 2000 ml
Skip product gallery

Matching accessories

Discount
IKA WiCo T 25 easy clean, wireless controller, remote control, 0025006310
IKA WiCo T 25 easy clean, wireless controller, remote control, 0025006310
Manufacturer number: 0025006310

Operation from a distance: IKA WiCo T 25 easy clean The IKA WiCo T 25 easy clean (MPN 0025006310) is the detachable core component of the IKA T 25 easy clean control disperser. This compact wireless controller (WiCo) allows you to control and monitor your disperser wirelessly via a Bluetooth connection. It serves as a spare part or as a second control unit for your existing system. Working under a fume hood The advantage of WiCo technology is operation from outside the fume hood when handling hazardous, toxic or strong-smelling samples. Remote control: You can position the T 25 drive deep inside the fume hood and close the fume hood completely. Control: With the WiCo in your hand, you can control the speed from outside. Operation takes place outside the fume hood. Intuitive display for all parameters The Wireless Controller’s easy-to-read TFT display ensures you always have a clear view of all critical process parameters for your sample preparation: Rotational speed: Stepless adjustment and monitoring of the actual and target rotational speeds. Temperature: (Provided a temperature sensor is connected to the drive) Monitor temperature-sensitive samples in real time. Timer/Counter: Precise control of the dispersion time for reproducible results. Trend display: Detect changes in viscosity during the dispersion process. Easy handling The WiCo can be removed from the drive motor in a single simple step. The controller’s battery is automatically recharged via the integrated docking station on the T 25 easy clean control as soon as it is docked. Technical data Model: WiCo T 25 easy clean Device type: Wireless controller / remote control Compatibility: For use exclusively with the IKA T 25 easy clean control dispersing drive (Note: Not compatible with the ‘digital’ version!) Connection: Bluetooth Display: TFT, colour Display parameters: Speed, temperature, timer/counter, system messages Power supply: Built-in rechargeable battery (charged via the main unit) Weight: approx. 0.2 kg Scope of delivery 1 x IKA WiCo T 25 easy clean (wireless controller) (Please note: The T 25 easy clean control dispersing drive is not included!) Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories Are you looking for the complete dispersion system including the drive, or do you still need the matching stand and the easy clean dispersing tools? We’d be happy to put together a bespoke package for you. Please contact our procurement service.

Sale price: €784.50 Manufacturer's RRP: €1,046.00 25% below manufacturer's RRP
Discount
IKA HS 25 EC - DW Holder, dishwasher holder for dispersing tools, 0025007380
IKA HS 25 EC - DW Holder, dishwasher holder for dispersing tools, 0025007380
Manufacturer number: 0025007380

The “easy clean” concept taken to its logical conclusion: IKA HS 25 EC - DW Holder IKA’s “easy clean” (EC) dispersing tools can be thoroughly cleaned without the need to laboriously dismantle the tool into its individual parts. The IKA HS 25 EC - DW Holder (MPN 0025007380) is an accessory for using this advantage in day-to-day laboratory work. The abbreviation ‘DW’ stands for ‘Dish Washer’ (laboratory dishwasher). Reliable cleaning without manual effort With this special holder, you can clean your S 25 EC dispersing tools by machine. Stable positioning: The holder secures the dispersing tool firmly and upright in the washing basket of your laboratory dishwasher. Protection against damage: The delicate tool is intended not to tip over due to water pressure, not to slip through the mesh of the washing basket and not to knock against other laboratory vessels. The machine’s spray arm is also intended to remain unblocked. Rinsing: Thanks to the upright positioning, the hot water and detergent mixture can flow from bottom to top through the shaft and the rotor-stator gap. Time savings: After sample preparation, simply place the tool into the holder in the dishwasher. There is no need for time-consuming manual scrubbing under running water. Compatibility This holder has been designed exclusively for the current generation of S 25 easy clean dispersing tools (e.g. S 25 EC-C-18G-ST, S 25 EC-T-C-25G, etc.), which are used in combination with the T 25 easy clean (digital and control) drives. (Note: This holder is not intended for use with classic IKA standard tools, which must be completely dismantled for cleaning). Technical data Model: HS 25 EC - DW Holder Product type: Dishwasher holder Compatible tools: IKA S 25 EC (easy clean) series Purpose: Secure, upright positioning of the tool in the dishwasher basket Durability: Intended for use in laboratory dishwashers. Scope of delivery 1 x IKA HS 25 EC - DW Holder (Note: Dispersing tools and dishwasher baskets are not included!) Individual requirements & accessories Do you use the “easy clean” tools with integrated temperature measurement (models with a “T” in their name)? These can also be washed using the DW Holder. We’d be happy to advise you on the suitable combination of drive and tool for your samples. Please contact our procurement service.

Sale price: €82.50 Manufacturer's RRP: €110.00 25% below manufacturer's RRP
Discount
IKA Silentstream flow breaker for dispersers, minimises air ingress, 0003754000
IKA Silentstream flow breaker for dispersers, minimises air ingress, 0003754000
Manufacturer number: 0003754000

Emulsions with less air entrapment: the IKA Silentstream flow breaker In demanding product development, cosmetic formulation, food technology and chemical synthesis, high-performance dispersion is one of the most important, yet physically demanding, methods of sample preparation. When a dispersing tool based on the rotor-stator principle operates in an open beaker or reactor at speeds of 10,000 to 25,000 revolutions per minute, it not only generates enormous shear forces to break down the particles. At the same time, a strong rotational flow is generated within the liquid. This flow leads to the formation of a deep, crater-shaped vortex. This vortex often extends right down to the stator’s suction ports. The consequence: the disperser continuously draws in ambient air into the liquid medium. IKA has developed the Silentstream accessory (MPN 0003754000). This flow baffle is a solution for reducing air ingress and improving the quality of your dispersions. The negative consequences of air entrapment in everyday laboratory work Why is air in a dispersed sample harmful? The unwanted introduction of air through vortex formation causes three major problems in everyday laboratory work: Firstly, the entrained air leads to excessive foaming. Highly foaming samples (such as protein-containing solutions or surfactant-containing shampoos) overflow from the beaker, contaminate the workstation and result in the loss of valuable sample material. Secondly, microscopic air bubbles impair the physical stability and texture of fine emulsions. A high-quality cosmetic cream or pharmaceutical ointment produced with air entrapments looks unattractive, feels dull on the skin and is prone to rapid phase separation (coalescence). Thirdly, and this is the most critical point for analytical purposes, constant contact with atmospheric oxygen at high shear rates leads to oxidation. Ingredients susceptible to oxidation, such as valuable vitamins, highly sensitive active pharmaceutical ingredients (APIs) or unsaturated fatty acids in food samples, can be damaged by this process, which can skew the subsequent analysis. The physical solution: the flow breaker principle The IKA Silentstream tackles the physical cause of this problem. The ring-shaped component is simply slid from below over the shaft of the dispersing tool (for example, the T 25 series) and positioned within the liquid medium. Thanks to its asymmetrical geometry, the Silentstream acts as a flow disruptor (flow breaker). It disrupts the uniform rotational movement of the liquid generated by the rapidly rotating rotor. The liquid is slowed down by the Silentstream and redirected into a chaotic, predominantly axial flow. The rotation of the entire fluid mass is reduced, the surface of the medium settles and the deep, air-sucking vortex is reduced. The disperser can continue to operate at high speed, but now draws in mainly liquid instead of an air-liquid mixture. Time savings and cost-effectiveness (TCO) in production Using the IKA Silentstream can also save time. If you have previously had to disperse highly foaming samples, you will be familiar with the problem of extremely long waiting times: you had to switch off the disperser after just a few seconds and wait for the voluminous foam to subside before you could continue the process. Alternatively, you had to add expensive chemical defoamers (antifoam agents), which distorted the chemical composition of your pure sample. With the Silentstream, these pauses can be shorter. You can complete the dispersion process in a single, continuous and rapid pass. This can shorten process times in your laboratory and increase daily sample throughput. Occupational health and safety and system integration A further positive side effect of the stabilised liquid surface is improved occupational health and safety. As the strong vortex and chaotic wave formation against the vessel wall are suppressed, the splashing of potentially hazardous, hot or toxic sample liquids out of the open beaker is reduced. The fume hood remains clean, and staff are protected. The Silentstream is manufactured from chemical-resistant materials. Thanks to its flow-optimised design, it can be cleaned very easily and thoroughly after use, leaving no residue, which reduces the risk of cross-contamination between different sample batches. The accessory is intended for use with IKA dispersers. Technical data Function: Flow breaker / flow stabiliser (baffle) Mode of action: Prevents vortex formation and the ingestion of air Analytical benefit: Prevents oxidation of sensitive active ingredients and foam formation Quality benefit: Produces homogeneous, air-bubble-free emulsions and suspensions Health and safety benefit: Prevents the medium from being ejected at high speeds Compatibility: Designed for mounting on the shaft of IKA dispersing tools (ideally for standard tool diameters of the T 25 series) Handling: Can be slid onto the tool shaft without the need for tools Cleaning: Easy-to-clean, chemical-resistant surfaces Scope of delivery 1 x IKA Silentstream flow breaker (Important note: The essential IKA drive motor, as well as the dispersing tool and the stand system, are available separately and are expressly not included in this scope of delivery.) Individual requirements & accessories To use this accessory, you will need a drive such as the IKA T 25 digital or T 25 easy clean control, as well as the appropriate dispersing tool (e.g. from the S 25 N series). If, despite the Silentstream, you are working with volatile solvents that must not be allowed to escape into the ambient air, we recommend switching to vacuum-tight reactor systems with the corresponding KD dispersing tools. Our procurement service will be happy to advise you on selecting the suitable tool sizes and setting up Standard Operating Procedures (SOPs) for your foam-free sample preparation.

Sale price: €21.00 Manufacturer's RRP: €28.00 25% below manufacturer's RRP