Dispersing equipment
Effizientes Zerkleinern, Emulgieren und Homogenisieren: Für reproduzierbare Ergebnisse in der Probenvorbereitung sind hochwertige Dispergiergeräte unverzichtbar. Bei LT Laborhandel finden Sie eine breite Auswahl an leistungsstarken Labor-Dispergierern und Homogenisatoren führender Hersteller, die speziell für die strengen Anforderungen in Forschung, Analytik und Qualitätssicherung entwickelt wurden.
Unser Sortiment umfasst vielseitige Lösungen für jeden Bedarf – vom kompakten, ergonomischen Handgerät für kleinste Probenmengen bis hin zu robusten Stativ-Systemen für größere Volumina im Pilotmaßstab. Egal ob Sie anspruchsvolle Flüssig-Flüssig-Emulsionen oder Fest-Flüssig-Dispersionen herstellen möchten: Vertrauen Sie auf exzellente Drehzahleffizienz, Langlebigkeit und höchste Präzision verschiedener Top-Marken. Finden Sie jetzt das passende Grundgerät sowie die perfekt abgestimmten Dispergierwerkzeuge für Ihre spezifischen Laboranwendungen!
IKA T 18 mini digital Solution Disperser Set, brushless motor including tool and stand, 0010015137
Not every laboratory workstation has room for a large drive, and not every sample requires 500 watts of power. The IKA T 18 mini digital Solution (0010015137) is designed precisely for these situations: a compact, brushless disperser set with an attachment and stand that can be accommodated even in small spaces and is designed for samples with lower viscosity. Compact brushless drive With external dimensions of 66 x 186 x 100 millimetres and a weight of 1.8 kilograms, the drive unit is significantly smaller than the classic T 18 digital. The brushless DC motor delivers 210 watts of input power and 160 watts of output power, and is designed for a maximum viscosity of 2,000 mPas. As with the larger series, the speed range extends from 3,000 to 25,000 revolutions per minute, albeit with a slightly higher tolerance of 3 per cent. Digital display, timer and USB-C The LED display shows the set speed, whilst an integrated timer with its own LED display manages the process time, meaning that runs do not need to be stopped manually. The device can be connected to a documentation system via the USB-C interface. In standby mode, power consumption is just 3 watts, whilst the maximum power consumption of the unit is 250 watts. Power is supplied internally via 48 volts DC at a current draw of 4,500 milliamps; the power supply unit itself covers the range from 100 to 240 volts and can therefore be used worldwide without the need for a separate voltage converter. Designed for smaller volumes and lower viscosity According to the manufacturer, the T 18 mini digital Solution is suitable for simple applications involving the homogenisation of low-viscosity samples. As with the larger model, the processable volume ranges from 0.001 to 1.5 litres; however, the maximum viscosity of 2,000 mPas is lower than that of the T 18 digital, which is 5,000 mPas. For routine samples in life sciences laboratories, training centres or smaller-scale quality control procedures that do not involve particularly viscous or high-volume batches, the performance is generally more than adequate. What the compact design means in everyday use With a footprint that is significantly smaller than that of the classic T 18 digital, the T 18 mini digital Solution can be accommodated even where several workstations are positioned close together, such as in practical training rooms or at smaller fume cupboard workstations. The lower weight of 1.8 kilograms also makes manual operation more comfortable over longer periods when a stand is not used. Those who regularly switch between several workstations also benefit from the fact that the compact unit is easier to transport than the larger series. Typical applications Homogenisation of low-viscosity samples (according to the manufacturer) Smaller batches in life sciences and teaching laboratories Workstations with limited floor space Processes with documented time control via the integrated timer Brief overview within the T-18 range For those requiring higher viscosity or greater motor power, the larger T 18 digital Solution offers the ideal set with a power consumption of 500 watts instead of 210 watts. LT Laborhandel supplies the drive unit on its own as the T 18 digital ULTRA-TURRAX; the dispersing tool included in the set is also available separately as the S 18 N - 19 G dispersing tool. Technical details Motor power consumption210 W Motor output160 W Processing volume (H₂O)0.001 to 1.5 l Max. viscosity2,000 mPas Speed range3,000 to 25,000 rpm, continuously variable Speed deviation3 % Speed displayLED Motor typeBrushless (direct current) Noise level without tools75 dB(A) Boom diameter13 mm Arm length160 mm Process typeBatch TimerYes, LED display Permissible duty cycle100 % Permissible ambient temperature range5 to 40 °C Permissible relative humidity80 % USB interfaceUSB-C Maximum power consumption250 W Standby power consumption3 W DC voltage48 V= Current consumption4,500 mA Dimensions (W x H x D)66 x 186 x 100 mm (drive unit) Weight1.8 kg (drive unit, excluding stand and tools) Power rating100 to 240 V, 50/60 Hz, 210 W (max. 250 W) Protection classIP 30 (DIN EN 60529) Contents 1 x IKA T 18 mini digital ULTRA-TURRAX (drive unit) 1 x S 18 N - 19 G dispersing tool 1 x R 1826 plate stand 1 x R 182 cross-sleeve Differences from the neighbouring series If you only require the drive unit without the set, it is available as the T 18 mini digital ULTRA-TURRAX. An overview of all dispersing units at LT Laborhandel can be found in the ‘Dispersing Units’ category; suitable tools are listed under ‘Dispersing Tools’. Application, installation and maintenance With an IP 30 protection rating, the drive unit is slightly better protected against the ingress of foreign objects than the classic T 18 digital with IP 20; however, it is still not designed to withstand splashing water. Operation is permitted at an ambient temperature of 5 to 40 degrees Celsius and a relative humidity of up to 80 per cent. The tool’s supplied PTFE bearing must not run dry; the medium provides both lubrication and cooling. The integrated timer reduces the effort required for manual time control in recurring processes, but does not replace the need to monitor the batch. At the end of its service life, as an electrical appliance, the drive must not be disposed of with household waste, but must be placed in the separate collection for waste electrical and electronic equipment. When the mini drive is a worthwhile investment If the viscosity of the samples is up to a maximum of 2,000 mPas and the focus is on a compact design, a timer and documentation via USB-C, the T 18 mini digital Solution reliably meets these requirements. If, on the other hand, thicker media up to 5,000 mPas are regularly processed, or if the higher power consumption of 500 watts is required, the larger T 18 digital Solution is the more suitable choice. Both sets share the same standard tool, the S 18 N – 19 G, so switching between the two sizes does not necessarily change the choice of tool. For laboratories that need to meet both requirements simultaneously – for example, a sensitive batch with low viscosity followed by a more viscous sample – it may also be worthwhile to purchase both sizes for different workstations. Individual requirements & procurement service Those who also work with disposable dispersing tools will find the S 18/25-ET50 disposable tube from LT Laborhandel to be a practical cleaning aid. Do you also require an additional stand for a second workstation or assistance with the USB connection to your documentation system? Through our procurement service, LT Laborhandel supports you with procurement and configuration. Frequently Asked Questions For which samples is the T 18 mini digital Solution suitable?According to the manufacturer, it is suitable for simple applications involving the homogenisation of low-viscosity samples, up to a maximum of 2,000 mPas. How does it differ from the larger T 18 digital Solution?The mini drive is brushless with a power consumption of 210 watts instead of 500 watts; it is more compact and designed for a lower maximum viscosity, but features a timer and a USB-C interface. Is a stand included in the scope of delivery?Yes, the set includes an R 1826 plate stand with an R 182 cross-sleeve. What is the USB-C interface used for?The USB-C port allows the device to be connected to a documentation system to record process data. What is the drive’s protection rating?IP 30 in accordance with DIN EN 60529, which protects against the ingress of foreign objects larger than 2.5 millimetres, but not against splashing water. Can I operate the drive worldwide without a voltage converter?Yes, the mains adaptor covers a range of 100 to 240 volts at 50/60 hertz.
IKA T 25 digital LR disperser, for laboratory reactors, up to 2000 ml, 0020008820
Anyone wishing to prepare emulsions, suspensions or nanoparticle formulations not in an open beaker but in a closed, temperature-controlled laboratory reactor will need a drive that can be integrated into this system. The IKA T 25 digital LR disperser (0020008820) is designed precisely for this purpose: a dedicated drive unit for high-speed dispersion in laboratory reactors, with a volume range of 1 to 2,000 millilitres (based on water) and a speed range of 600 to 25,000 revolutions per minute. Unlike a benchtop disperser for open beakers, it is designed from the outset for mechanical integration into closed reactor systems and is not intended as a stand-alone, ready-to-use laboratory instrument. Powerful drive with infinitely variable speed control The 800-watt motor (500 watts output power) covers a continuously and electronically adjustable speed range from 600 to 25,000 revolutions per minute, displayed via a digital LED display with a deviation of just 1 per cent from the set target speed. In combination with the appropriate IKA dispersion tools, high shear forces are generated in the narrow shear gap between the rotor and stator, which break down particles and droplets and homogenise liquid phases – the classic operating principle of rotor-stator dispersers. The maximum permissible viscosity of the medium is 5,000 mPa·s, a guideline value that must be taken into account when selecting the dispersing tool and controlling the process. Designed for installation in laboratory reactor systems Unlike free-standing bench-top dispersers, the T 25 digital LR is designed as a drive unit only, which can be mechanically coupled with the special dispersing tools of the KD-LR series. These tools are designed for use in closed laboratory reactors such as the IKA LR 1000 and, thanks to high-quality shaft seals, enable operation under vacuum – which is useful for preventing aerosol and foam formation in media containing surfactants or for processing oxidation-sensitive batches under an inert atmosphere. Neither the dispersing tool nor the reactor itself is included with the T 25 digital LR; both must be purchased separately to suit the specific application. Electronic overload protection and digital display An integrated microprocessor maintains the set speed even when the resistance of the medium changes, for example if the viscosity of a batch increases during the reaction. If the stirring tool becomes suddenly blocked, for example by a jammed particle, an electronic overload protection system switches off the motor and displays an error code; this protects both the motor and the coupled dispersing tool. The unit is designed for continuous operation with a permissible duty cycle of 100 per cent. Compact design for mounting on a reactor stand Measuring 87 x 271 x 106 millimetres and weighing 2.5 kilograms, the T 25 digital LR can be mounted on a reactor stand to save space. The noise level without the dispersing tool fitted is 75 dB(A). The housing is rated to protection class IP 20 and approved for an ambient temperature of 5 to 40 degrees Celsius. It can be connected to either 220 to 240 volts or 100 to 120 volts at 50 or 60 hertz. Selecting the appropriate dispersing tool Which KD-LR tool is suitable in each individual case depends on the reactor volume, the desired immersion depth and the viscosity range of the medium. The tools in this series feature an extended design so that, even in larger reaction vessels, they reach right down to the bottom of the vessel and continue to disperse effectively there, rather than leaving dead volume unused. As the T 25 digital LR is designed as a drive for different reactor sizes and tool variants, the same drive can often continue to be used when process requirements change, whilst only the dispersing tool is replaced. Typical applications As a drive unit for laboratory reactors, the T 25 digital LR is used wherever dispersion processes must take place under controlled, closed conditions: Production of emulsions and creams under air-exclusion conditions in closed reactors Dispersion and homogenisation of suspensions with controlled temperature regulation Scale-up trials between open beaker stirring and pilot reactors Production of finely dispersed systems with limited sample volumes from 1 millilitre Process development in the pharmaceutical and fine chemicals industries with requirements for reproducibility Technical details Product typeDrive unit for dispersion tools in laboratory reactors Volume range (H₂O)1 to 2,000 ml Motor power (input / output)800 W / 500 W Speed range600 to 25,000 rpm, electronically continuously adjustable Speed deviation1 % Speed displayLED display Maximum permissible viscosity of the medium5,000 mPa·s Noise level (without dispersing tool)75 dB(A) Permissible duty cycle100 % (continuous operation) Motor protectionElectronic overload protection with error code display Dimensions (W x H x D)87 x 271 x 106 mm Arm length / Arm diameter160 mm / 13 mm Weight2.5 kg Protection class (to DIN EN 60529)IP 20 Permissible ambient temperature5 to 40 °C Power supply220 to 240 V or 100 to 120 V, 50/60 Hz Contents of delivery 1 x IKA T 25 digital LR drive unit 1 x mains lead for IT equipment 1 x operating instructions Not included are the required dispersing tool from the KD-LR series, the laboratory reactor itself, and a stand for mounting the drive unit. These components must be procured separately to suit the specific application. Customised requirements & procurement service As the T 25 digital LR is designed purely as a drive unit, you will also need a suitable dispersing tool from the KD-LR series and a stand solution to secure the drive in order to operate it on your laboratory reactor. Through our procurement service, we can assist you in selecting the appropriate dispersing tool for your specific application, as well as stand materials, spare parts and accessories for integration into existing reactor systems. Further information and contact details can be found at lt-laborhandel.de/service.
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
Anyone who frequently homogenises samples in the laboratory will be familiar with the problem: a good drive alone is not enough; ultimately, it is the right tool that determines the final fineness and throughput. The IKA T 18 digital ULTRA-TURRAX (0003720000) is designed precisely with this in mind. It is supplied as a drive unit only, with a power consumption of 500 watts, which can be freely combined with various S-18 tools for coarse, fine or single-use applications. The LED display shows the set speed – between 3,000 and 25,000 revolutions per minute – at all times, which facilitates reproducible results across multiple test runs. Rotor-stator principle with high shear rates During dispersion, the tool draws the sample in axially and forces it out radially through the narrow slots between the rotor and stator. This briefly generates very high shear rates, which break down solid components and mix liquids into stable emulsions or suspensions. With an output power of 300 watts and a processable volume of 0.001 to 1.5 litres (based on water), the T 18 digital covers typical laboratory batches up to a maximum viscosity of 5,000 mPas. Stepless speed control with LED display The speed can be adjusted continuously between 3,000 and 25,000 rpm, with a deviation of just 1 per cent according to the data sheet. Unlike purely analogue controllers, the LED display shows the set value directly. Once process parameters have been determined, they can be noted down and reproduced exactly for subsequent experiments. With a permissible duty cycle of 100 per cent, prolonged continuous operation is also possible without the drive having to pause in between. The choice of tool determines the result The T 18 digital is deliberately supplied without a dispersing tool, as the most suitable tool depends heavily on the specific sample. The standard S 18 N – 19 G tool with PTFE bearings is suitable for coarse pre-shredding and tougher media, whilst the S 18 N – 10 G offers a narrower gap geometry for finer end products. Those who frequently work with varying samples that are potentially susceptible to contamination will find disposable plastic tools to be a practical alternative, as they rule out cross-contamination between batches from the outset. Typical areas of application As a standalone drive unit, the T 18 digital is particularly suitable for laboratories that already work with a variety of tools or switch specifically between several applications: Preparation of emulsions and suspensions in sample preparation Homogenisation of tissue samples in biology and life sciences research Mixing pigments and fillers into dispersions Routine tasks in quality assurance with varying tool configurations Setting up customised workstations through flexible combination with a stand and tool Selection guide for the T-18 range Drive unit only, complete set or just the tool? The four T-18 variants stocked by LT Laborhandel differ primarily in terms of what is included in the scope of delivery and, in the case of the mini-drive, in terms of motor power. ProductTypeMotor power (input/output)Speed rangeScope of delivery T 18 digital ULTRA-TURRAX (this product)Drive unit500 W / 300 W3,000 to 25,000 rpmDrive unit only, without tools T 18 digital SolutionSet500 W / 300 W3,000 to 25,000 rpmDrive unit, S 18 N – 19 G tool, stand, cross-sleeve T 18 mini digital SolutionSet, compact drive210 W / 160 W3,000 to 25,000 rpmDrive, tool S 18 N – 19 G, stand, cross-coupling S 18 N - 19 G dispersing toolSingle toolNo built-in motorPermitted up to 25,000 rpmTool only Anyone who already owns a T-18 drive or wishes to switch between several tools as required is best served by the drive described here, which does not require a tool. The complete T 18 digital Solution Set is ideal for getting started straight away without having to order a separate tool; those looking for a more compact and quieter workstation will find the T 18 mini digital Solution to be the perfect alternative with lower motor power. Technical details Motor power input500 W Motor power output300 W Processing volume (H₂O)0.001 to 1.5 l Max. viscosity5,000 mPas Speed range3,000 to 25,000 rpm, continuously variable Speed deviation1 % Speed displayLED Noise level without tools75 dB(A) Boom diameter13 mm Arm length160 mm Process typeBatch Permissible duty cycle100 % Permissible ambient temperature range5 to 40 °C Permissible relative humidity80 % (up to 31 °C), decreasing linearly to a maximum of 50 % (at 40 °C) Dimensions (W x H x D)87 x 271 x 106 mm Weight2.5 kg Power rating220 to 240 V, 50/60 Hz, 500 W (other voltage options from 100 to 120 V available) Protection classIP 20 (DIN EN 60529) Scope of delivery 1 x IKA T 18 digital ULTRA-TURRAX (drive unit, without dispersing tool) The dispersing tool and stand are not included and must be purchased separately to suit the specific application. Differences from the neighbouring series If you also require a brushless motor with a timer, the IKA T 18 brushless series offers the next step up: the T 18 brushless digital ULTRA-TURRAX as a drive unit without an attachment, or the T 18 brushless digital Solution as a complete set. Both drive units operate with lower wear than the classic T 18 digital. An overview of all dispersers available from LT Laborhandel can be found in the ‘Dispersers’ category; suitable tools are listed under ‘Dispersing Tools’. Application, set-up and maintenance For short-term manual operation, the T 18 digital fits comfortably in the hand; for longer or reproducible processes, it can be securely mounted on a stand, such as the R 1826 plate stand. Operation is permitted at an ambient temperature of 5 to 40 degrees Celsius and a relative humidity of up to 80 per cent at 31 degrees Celsius, decreasing linearly to a maximum of 50 per cent at 40 degrees Celsius. The drive, with protection class IP 20, is not designed for use in damp rooms or outdoors. After each use, the tool used should be dismantled and, depending on the material, cleaned or sterilised before the next procedure begins. At the end of its service life, as an electrical appliance, the drive must not be disposed of with household waste but must be placed in the separate collection for waste electrical and electronic equipment. Individual requirements & procurement service In addition to the standard tools, LT Laborhandel supplies further accessories for the T 18 digital, such as stands, mounting elements or the Silentstream flow breaker to reduce air ingress during dispersion. Do you require a specific tool, a qualification document or assistance in selecting the right configuration? Through our procurement service, LT Laborhandel can assist you with procurement and configuration. Frequently Asked Questions Is a dispersing tool included in the scope of delivery?No, the T 18 digital is supplied exclusively as a drive unit. A suitable tool, such as the S 18 N - 19 G, must be purchased separately. Which tool is suitable for coarse pre-grinding?For coarse applications and tougher media, the S 18 N - 19 G with PTFE bearings is the standard choice; finer end products can be achieved with the S 18 N - 10 G. How accurately can the speed be reproduced?The LED display shows the set value within a range of 3,000 to 25,000 rpm with a deviation of around 1 per cent, which facilitates the exact repetition of test series. Is a stand included in the scope of delivery?No; for continuous operation, we recommend a separately available stand such as the R 1826 plate stand. What is the difference between the T 18 digital and the T 18 mini digital Solution?The T 18 mini digital Solution features a more compact, brushless drive with lower motor power and comes as a set including the tool and stand; the T 18 digital described here is the more powerful drive unit without accessories.
IKA T 18 digital Solution Disperser Set, including tool and stand, 0009024700
For those who want to get started straight away, without having to assemble the drive, tool and stand individually first, the IKA T 18 digital Solution (0009024700) offers a fully coordinated complete package. The set combines the tried-and-tested T 18 digital drive with the standard S 18 N - 19 G dispersing tool and a sturdy plate stand complete with cross-sleeve, all ready for use straight out of the box. Everything included for an immediate start Instead of ordering four separate items and checking whether they fit together, the Solution version supplies all components in a single package: Drive: IKA T 18 digital ULTRA-TURRAX with 500-watt power consumption Dispersing tool: S 18 N - 19 G with PTFE bearings for coarse to medium-duty applications Mounting: R 1826 plate stand including R 182 cross-sleeve for a stable, low-vibration base Digital speed control with LED display The speed range extends from 3,000 to 25,000 revolutions per minute, is infinitely variable and has a deviation of around 1 per cent according to the data sheet. The LED display shows the set value directly, so that once process parameters have been determined, they can be noted down and repeated for subsequent trials. With an output power of 300 watts, the drive can process samples with a viscosity of up to 5,000 mPas. With a permissible duty cycle of 100 per cent, the drive can also be operated continuously for longer process stages without the need to schedule a cooling break between batches. Tool S 18 N - 19 G ready for use The supplied tool covers a working range of 10 to 1,500 millilitres and, with its coarsely toothed geometry, is suitable for the pre-shredding of solid components as well as for more viscous media. The rotor shaft is mounted in PTFE, which is resistant to most solvents, acids and alkalis. Details on the design and limit values of the tool can be found in the separate S 18 N – 19 G dispersing tool data sheet. Interchangeable tool for different samples Even though the set is already equipped with a suitable tool, the drive remains compatible with the entire S-18 tool range. A quick-release coupling allows for tool changes without the need for a tool kit, meaning that, if required, a finer tool for smaller end products or a single-use tool for contamination-sensitive batches can be fitted. For day-to-day use with varying sample types, this is a significant advantage over a permanently fitted tool: the set covers the basics but grows in line with the laboratory’s requirements. Typical areas of application As a complete package, the T 18 digital Solution is particularly suitable for new purchases and the setting up of additional workstations: Re-equipping laboratory workstations without existing dispersion accessories Preparation of emulsions and suspensions in sample preparation Homogenisation of samples in quality control and routine analysis Teaching and training laboratories where a ready-to-use kit is required Brief overview within the T-18 range In addition to this set, LT Laborhandel stocks the T 18 digital ULTRA-TURRAX drive (tool-free) for those who already own their own accessories, as well as the more compact T 18 mini digital Solution with a brushless drive and lower motor power for smaller work surfaces. Anyone wishing to reorder just the included tool separately can find it as the S 18 N - 19 G dispersing tool. Technical details Motor power input500 W Motor power output300 W Processing volume (H₂O)0.001 to 1.5 l Max. viscosity5,000 mPas Speed range3,000 to 25,000 rpm, continuously variable Speed deviation1 % Speed displayLED Noise level without tools75 dB(A) Boom diameter13 mm Arm length160 mm Process typeBatch Permissible duty cycle100 % Permissible ambient temperature range5 to 40 °C Permissible relative humidity80 % (up to 31 °C), decreasing linearly to a maximum of 50 % (at 40 °C) Dimensions (W x H x D)87 x 271 x 106 mm (T 18 digital drive unit) Weight2.5 kg (drive unit, excluding stand and tools) Power rating220 to 240 V, 50/60 Hz, 500 W (other voltage variants from 100 to 120 V available) Protection classIP 20 (DIN EN 60529) Scope of delivery 1 x IKA T 18 digital ULTRA-TURRAX (drive unit) 1 x S 18 N - 19 G dispersing tool 1 x R 1826 plate stand 1 x R 182 cross-sleeve Differences from the neighbouring series If you are also looking for a brushless motor with a timer, the IKA T 18 brushless series offers a comparable set with an additional timer function in the form of the T 18 brushless digital Solution. An overview of all dispersers available from LT Laborhandel can be found in the ‘Dispersers’ category. Application, installation and maintenance The supplied plate stand ensures a secure, low-vibration base even at high speeds and is particularly suitable for longer or unattended process stages. Operation is permitted at an ambient temperature of 5 to 40 degrees Celsius and a relative humidity of up to 80 per cent at 31 degrees Celsius, decreasing linearly to a maximum of 50 per cent at 40 degrees Celsius. The PTFE bearing of the supplied tool must not run dry; the medium serves both as lubrication and cooling. After use, the tool can be disconnected from the drive for cleaning or sterilisation, as can the stand, which can be detached again for the next configuration. At the end of its service life, the drive, as an electrical appliance, must not be disposed of with household waste but must be placed in the separate collection for waste electrical and electronic equipment. When the complete set is worthwhile For laboratories that do not yet own a T-18 drive, the set saves time on ordering and compatibility checks compared to purchasing the drive, tool and stand separately. On the other hand, those who already have a suitable stand or several tools and only require an additional drive may find it more cost-effective to opt for the separately available T 18 digital ULTRA-TURRAX without the set. For a second or third workstation with identical equipment, however, the complete set is once again the ideal choice, as it ensures that each station is equipped independently of the others. Individual requirements & procurement service For regulated environments where the introduction of equipment must be documented, LT Laborhandel also provides qualification documentation for the T 18 digital Solution, such as IQ/OQ documents, factory calibration certificates or general certificates in accordance with 2.2/3.1. Do you also require additional or alternative tools for abrasive or particularly viscous media, a second stand for an extra workstation, or assistance in selecting the right configuration? Through our procurement service, LT Laborhandel supports you with procurement and documentation. Frequently Asked Questions Is the T 18 digital Solution ready for immediate use?Yes, the drive, the S 18 N – 19 G dispersing tool and the plate stand are included in the set and are designed to work together. Which tool is included in the set?The S 18 N – 19 G with PTFE bearings, suitable for coarse pre-grinding and a working volume of 10 to 1,500 millilitres. How does the set differ from the T 18 digital drive sold separately?The T 18 digital ULTRA-TURRAX drive, available separately, is supplied without the tool or stand; the Solution Set already includes both components. Can I use a different tool instead of the one supplied?Yes, the drive is compatible with the entire S-18 range of tools, so finer or coarser variants can be retrofitted if required. Is the stand permanently attached to the drive?No, the drive, tool and stand can be detached from one another, for example for cleaning or for use at different workstations. Are qualification documents available for the set?Yes, LT Laborhandel can provide IQ/OQ documents, factory calibration certificates and general certificates in accordance with 2.2/3.1 for the T 18 digital Solution on request.
IKA T 10 battery Complete Solution disperser set, including stand, up to 30,000 rpm, 0010015688
The T 10 battery Complete Solution complements the battery-powered T 10 battery ULTRA-TURRAX disperser by providing the equipment required for stationary operation on a laboratory bench. In addition to the dispersing tool, a cross-sleeve and a stand are included so that the unit can be secured in place during use.What else is included in the Complete SetThe drive unit and the S 10 N - 5 G dispersing tool are complemented by an H 44 cross-sleeve and an R 104 stand. This allows the disperser to be secured to the stand, keeping it in position during longer process steps without the need for someone to hold it in place continuously. For batch work on the laboratory bench, this is a significant improvement over manual operation alone.Same drive unit as the stand-alone modelThe technical specifications of the drive unit correspond to those of the separately available T 10 battery ULTRA-TURRAX: Continuously variable speed from 8,000 to 30,000 revolutions per minute, processable volume from 0.5 to 100 millilitres (H₂O), battery with 10.8 volts and 34.56 watt-hours of energy capacity, rechargeable via USB-C cable or charging clip.Stand for stationary operationThe R 104 stand, together with the H 44 cross-sleeve, holds the disperser in a fixed position above the vessel. This reduces strain on the hand when processing multiple samples in succession and ensures a more consistent immersion depth of the tool from sample to sample.Documentation for all set componentsThe set includes separate operating instructions for the stand, cross-sleeve and dispersing tool, in addition to the multilingual instructions for the drive unit itself. Anyone requiring multiple language versions during operation can access the relevant documents without having to make a separate enquiry.Change the tool size as requiredThe supplied S 10 N - 5 G tool covers a diameter of 5 millimetres. For larger or smaller sample quantities, a different tool from the same T-10 series – for example, with a diameter of 8 or 10 millimetres – can be attached via the quick-release coupling without having to change the stand or drive unit. The stand itself remains in place; only the tool head is changed.Typical applicationsStationary sample preparation on a laboratory bench with a stand mountBatch processing where the device is to remain in position between samplesAn entry-level model in the battery-powered T-10 series with a complete basic kitSelection guide: Complete, Portable or Tissue Safe?If you mainly work in a stationary setting and value having a stand and clamp, the Complete Solution is the right choice for you. For mobile use without a stand, the slimmer T 10 battery Portable Solution is sufficient. For tissue samples requiring sterile, single-use instruments, the T 10 battery Tissue Safe Solution is more suitable. If you only need the drive unit without accessories, order the T 10 battery ULTRA-TURRAX separately or, for mains operation, opt for the T 10 basic ULTRA-TURRAX.Technical detailsMotor power input / output30 W / 25 WProcessable volume (H₂O)0.5 to 100 mlMax. viscosity200 mPasSpeed range8,000 to 30,000 rpm, continuously variable (5 per cent deviation)Speed displayLCDMotor typebrushless, direct currentNoise level without tools65 dB(A)Boom diameter / boom length8 mm / 100 mmDuty cycleON 10 mins, OFF 5 minsTimerYes, LCD displayPermissible ambient temperature / humidity5 to 40 °C / 80 %Protection classIP 30 in accordance with DIN EN 60529USB interfaceUSB-CCharging input15 V =, max. 45 W, 3,000 mABattery typeCustom LiPo, 3 cells, type 18650-3S1PBattery capacity34.56 WhBattery voltage10.8 VBattery installationpermanently fittedDimensions (W x H x D) of drive unit53 x 239 x 70 mmWeight of drive unit0.5 kgIncluded tripod / cross-sleeveR 104 stand / H 44 cross-sleeveContentsT 10 battery ULTRA-TURRAX drive unit including permanently fitted batteryS 10 N - 5 G dispersing tool, reusable, stainless steel, 5 mmH 44 cross-coupling, ID no. 0002437700R 104 stand, ID No. 0003386000Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). It contains a permanently installed lithium battery and, together with the battery, must not be disposed of with household waste. The WEEE registration number of the manufacturer IKA is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and Procurement ServiceThe T 10 battery Complete Solution is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For further accessories, such as additional dispersing tools, the procurement service provided by LT Laborhandel will handle the assembly.
IKA T 25 digital ULTRA-TURRAX disperser, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0003725000
A batch of formulation in a beaker, an emulsion in a 500-millilitre flask, a batch of cell suspension for sample preparation: the T 25 digital ULTRA-TURRAX is the classic drive unit for all tasks in everyday laboratory work involving volumes between 1 millilitre and 2 litres. It covers a speed range from 3,000 to 25,000 revolutions per minute and is supplied as a drive unit only, without a dispersing tool, so that each laboratory can choose the appropriate tool geometry itself.Electronic speed control for reproducible batchesThe speed can be adjusted continuously between 3,000 and 25,000 rpm, with a deviation of just 1 per cent. An LED display shows the set value directly, whilst electronic overload protection and an error code display ensure reliable operation. Without an attachment fitted, the unit remains comparatively quiet at 75 dB(A); the maximum viscosity is 5,000 mPas. For batches that alternate between low- and medium-viscosity phases, the speed can be readjusted at any time during the process without switching off the unit.Compact drive for the laboratory benchMeasuring 87 x 271 x 106 millimetres and weighing 2.5 kilograms, the T 25 digital takes up little bench space; the arm measures 13 millimetres in diameter and 160 millimetres in length. The power input is 800 watts, whilst the power output is 500 watts. The unit operates at 220 to 240 volts at 50 or 60 hertz; a voltage variant of 100 to 120 volts is also available. Protection class IP 20 in accordance with DIN EN 60529 and a permissible duty cycle of 100 per cent round off the key technical specifications; the permissible ambient temperature range is from 5 to 40 degrees Celsius with up to 80 per cent relative humidity.Assemble tools and stand as requiredAs no dispersing tool is supplied, each laboratory selects the geometry to suit the application: reusable stainless steel tools such as the S 25 N - 18 G - ST (Ident 0004447300) or the S 25 N - 25 G (Ident 0001713300), as well as disposable plastic tools in two sizes for applications where cross-contamination between samples must be ruled out. The S 25 KV – 25 G dissolver tool (Ident 0002466900) is suitable for more viscous media. For stationary operation, the R 1826 plate stand (ID 0003160100) with R 182 cross-sleeve (ID 0002657700) is available; for cleaning, the TS 25-3 Cleaning Tool (ID 0020003013) or the disposable tube S 18/25-ET50 (ID 0003452500) are suitable for cleaning.Typical applicationsHomogenisation of wastewater samples in environmental analysisDispersion tasks in laboratory reactorsWork under vacuum or pressure with suitable accessoriesSample preparation in medical researchSelection guide: individual drive unit or complete setIf you do not wish to put together the tool and stand separately, you will find the same technology, including accessories, in the T 25 digital Solution. For smaller tasks involving temperature measurement, the T 25 mini control ULTRA-TURRAX is the more compact alternative; for a housing design that is easier to clean, the T 25 easy clean digital is the choice. If the volume range of up to 2 litres is no longer sufficient for larger batches, the T 50 digital ULTRA-TURRAX handles volumes of up to 30 litres.Technical detailsMotor power input / output800 W / 500 WProcessing volume (H₂O)0.001 to 2 lMax. viscosity5,000 mPasSpeed range3,000 to 25,000 rpm, continuously variable (1 per cent deviation)Speed displayLEDNoise level (without tools)75 dB(A)Boom diameter / boom length13 mm / 160 mmProcess typebatchPermissible duty cycle100%Permissible ambient temperature range / humidity5 to 40 °C / 80 % (up to 31 °C), decreasing linearly to 50 % at 40 °CProtection classIP 20 in accordance with DIN EN 60529Rated power220 to 240 V, 50/60 Hz, 800 W (additional voltage variant 100 to 120 V available)Dimensions (W x H x D)87 x 271 x 106 mmWeight2.5 kgContentsT 25 digital ULTRA-TURRAX drive unitA dispersing tool is not included and must be selected separately to suit the specific application.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe T 25 digital is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service puts together dispersing tools, stands and other accessories to suit your existing drive; on request, it can also provide factory calibration certificates and qualification documents for regulated areas.
IKA T 10 basic ULTRA-TURRAX disperser, 0.5 to 100 ml, up to 30,000 rpm, 0003737000
The IKA T 10 basic ULTRA-TURRAX is a hand-held disperser for small sample volumes of between 0.5 and 100 millilitres (H₂O). The unit is powered directly from the 230-volt mains supply, requires no battery and is ready for use immediately upon plugging it in. The speed is infinitely variable from 8,000 to 30,000 revolutions per minute, allowing it to process both low-viscosity aqueous samples and thicker emulsions up to 5,000 mPas.Continuously variable speed via the scale displayOn the T 10 basic, the speed is read from a scale on the housing; the battery-powered ‘battery’ version displays it digitally. This is sufficient for a procedure where the same mark can always be selected, and operation remains simple. When plugged in, the unit draws 125 watts, 75 watts of which are delivered to the motor. A duty cycle of 10 minutes followed by a 5-minute pause protects the motor from overheating during longer production runs.Tool change without additional toolsThe arm has a diameter of 8 millimetres and a length of 100 millimetres. The dispersion tool can be removed without any additional tools using the quick-release coupling. Stainless steel dispersion tools are dismantled and cleaned individually for this purpose, whilst the disposable plastic tools, available in two sizes, come ready-assembled from the packaging and are disposed of after use. This reduces the cleaning effort required between two samples and prevents cross-contamination, for example in PCR analysis. No dispersing tool is included in the scope of delivery; it is selected separately to suit the application.Compact and lightweight for manual operationMeasuring 178 millimetres in length, 56 in width and 66 in depth, the T 10 basic fits comfortably in the hand. Weighing 0.61 kilograms, the device can be held for extended periods without causing fatigue; the noise level without an attachment fitted is 65 dB(A).For different mains voltagesIn addition to the standard 230-volt version, IKA also supplies the same unit in 115-volt and 100-volt versions, for countries outside the European mains supply or for branch sites with different mains voltages. The IP 30 protection rating in accordance with DIN EN 60529 and a permissible operating range of between 5 and 40 degrees Celsius at up to 80 per cent relative humidity are sufficient for normal day-to-day laboratory use, although the unit is not designed for use outdoors or in damp rooms.Typical applicationsHomogenisation of small tissue samples prior to further extractionPreparation and fine dispersion of emulsions and suspensions on a micro-scaleSample preparation for PCR analysis using disposable plastic instrumentsRoutine tasks in teaching and training where a robust instrument that does not require battery maintenance is requiredSelection guide: basic or battery?The T 10 basic runs exclusively on mains power and therefore always requires a power socket within reach. For those who wish to use the disperser under a fume cupboard or on the move without a cable, the T 10 battery ULTRA-TURRAX is the battery-powered variant of the same series, albeit with lower motor power and a lower viscosity limit of 200 mPas. For mobile use with suitable accessories, there are also three kits available, such as the T 10 battery Portable Solution or the T 10 battery Tissue Safe Solution with disposable tools for tissue samples.Technical detailsMotor power input / output125 W / 75 WProcessable volume (H₂O)0.5 to 100 mlMax. viscosity5,000 mPasSpeed range8,000 to 30,000 rpm, continuously variableSpeed displayScaleNoise level without tools65 dB(A)Boom diameter / boom length8 mm / 100 mmDuty cycleON 10 mins, OFF 5 minsPermissible ambient temperature / humidity5 to 40 °C / 80 %Protection classIP 30 in accordance with DIN EN 60529Dimensions (W x H x D)56 x 178 x 66 mmWeight0.61 kgPower rating230 V, 50/60 Hz, 125 W (other voltage options: 115 V / 100 V)ContentsT 10 basic ULTRA-TURRAX drive unit, ID No. 0003737000R 200 clamp, ID No. 0003372000A dispersing tool is not included in the scope of delivery and must be selected separately from the range of accessories to suit the application.Regulatory informationThis unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe T 10 basic is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service will assemble suitable dispersing tools, stands or clamps from the T-10 range of accessories.
IKA UTTD control Pharma Solution Disperser Set, DIS-300-S-M Dissolver Mixing Vessel, 400 to 8,000 rpm, 0010013297
Pharmacopoeia tests in accordance with USP 905 or PhEur 2.9.40 require the uniform comminution and dissolution of tablets and capsules before the actual analysis begins, and it is precisely here that different batches present different cleaning and contamination risks. The UTTD control Pharma Solution combines the controllable ULTRA-TURRAX Tube Drive P control with DIS-300-S-M single-use dissolver vessels, which crush and dissolve tablets in various solvents without the need to clean the vessel between samples.Dissolver mixing vessel for a 300-millilitre batch volumeThe set contains the DIS-300-S-M mixing vessel with a volume of 300 millilitres in a pack of 10, fitted with a dissolver disc that ensures thorough dissolution of tablets and capsules in various solvents. The hermetically sealable disposable vessel serves simultaneously as a mixing, storage and transport container; the addition of media or sample withdrawal takes place via a pierceable membrane in the lid. For comminution and subsequent dissolution, the set thus supports the preparatory steps for standardised pharmacopoeia procedures such as USP 905 and PhEur 2.9.40. As each sample is processed in its own vessel, which is disposed of after use, the carry-over of active ingredient residues between different formulations is prevented – a point that must be regularly documented during the validation of test methods.P-control drive with programmable cyclesThe set is driven by the ULTRA-TURRAX Tube Drive P control with an OLED display, a speed range of 400 to 8,000 revolutions per minute in 10-rpm increments and a deviation of just 3 per cent. Time, energy and volume can be programmed as test conditions and saved for recurring batch tests; a turbo button allows for brief periods of more intensive operation. A USB-B interface connects the drive to a computer, for example to document test runs. Measuring 122 x 54 x 178 millimetres and weighing 1.3 kilograms, the drive fits on any laboratory bench and is powered by a 24 V DC power supply at 1,500 mA with a power consumption of 36 watts.Typical applicationsPreliminary crushing and disintegration of tablets and capsules prior to dissolution or content testsPharmaceutical quality control involving recurring, cross-batch testingAnalytical work requiring the processing of small sample quantities without cross-contamination between batchesResearch into new formulations using different solvents for each batchAs each DIS-300-S-M vessel is disposed of after a single use, there is no need for cleaning between tests, which is an advantage when handling high sample throughput.Selection guide: Pharma Solution or other UTTD setsThe dissolver mixing vessel in this set is designed for tablet comminution. If, on the other hand, the aim is to homogenise tissue samples from life sciences research, the UTTD control Life Science Solution with DT-20 dispersing vessels is more suitable; for IVD tissue samples from the surgical workflow, the UTTD basic Tissue Solution with the simpler drive without P control is recommended. Anyone wishing to reorder their own Dissolver mixing vessels in larger volumes or different pack sizes can opt for the standalone ULTRA-TURRAX Tube Drive P control drive or the ready-to-use Tube Drive P control Workstation as an alternative, should additional stirring and dispersing vessels be required for other tasks.Technical detailsMotor power consumption (drive)36 WMotor power output (drive)28 WSpeed displayOLEDSpeed range400 to 8,000 rpmSpeed adjustment10-rpm incrementsSpeed deviation3 %TimerYes, OLED displayUSB interfaceUSB-BMax. viscosity5,000 mPasNoise level (without tools)50 dB(A)Process typebatchVolume of DIS-300-S-M mixing vessel300 mlRelevant test standards (sample preparation)USP 905, PhEur 2.9.40Permissible ambient temperature range5 to 40 °CPermissible relative humidity80 %Protection classIP 20 in accordance with DIN EN 60529 (actuator)Rated values100 to 240 V, 50/60 Hz, 36 W, 24 V=/ 1500 mA power supply unitScope of deliveryULTRA-TURRAX Tube Drive P control drive unitDIS-300-S-M.10 Dissolver mixing vessel, 300 ml, pack of 10The pack size of 10 is suitable for smaller test series; larger batches can be accommodated by reordering the appropriate dissolver mixing vessels.Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and Procurement ServiceThe IKA manufacturer’s warranty applies to the drive unit of the UTTD control Pharma Solution: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. Reorders of the DIS-300-S-M dissolver mixing vessel in other pack sizes, as well as other suitable accessories, are handled by the procurement service at LT Laborhandel; on request, these can include factory calibration certificates and qualification documents (IQ/OQ) for GMP-compliant use.
IKA T 25 mini control Solution Disperser Set, 1 to 1,500 ml, 600 to 25,000 rpm, with temperature measurement, 0010015125
The T 25 mini control Solution combines the network-ready, temperature-monitoring T 25 mini control drive unit with a matching dispersing tool and stand to form a ready-to-use set, designed for anyone who wants to get started without having to select separate accessories.What’s included in the setIn addition to the drive unit, the set includes the S 25 EC - T - C - 18 G with an integrated temperature sensor (ID No. 0020108998), an R 1826 plate stand (ID No. 0003160100) and an R 182 cross-sleeve (ID No. 0002657700). This allows the temperature measurement function of the drive unit to be used directly on the supplied tool, without the need to purchase a separate measuring tool.Temperature monitoring and networking as in the standalone unitTechnically, the drive unit corresponds to the T 25 mini control ULTRA-TURRAX, which is available separately: a brushless motor with a power input of 210 watts and a power output of 160 watts, continuously variable speed between 600 and 25,000 revolutions per minute, plus temperature measurement from 0 to 125 degrees Celsius with a resolution of 0.1 Kelvin and a measurement accuracy of ±1 Kelvin. USB-C, Wi-Fi, Ethernet, WPAN and RS232 are available for connection to laboratory systems.Compact on a stand, for batches up to 1.5 litresThe drive unit measures 66 x 186 x 100 millimetres and weighs 1.8 kilograms; the processable volume ranges from 0.001 to 1.5 litres (H₂O) at a maximum viscosity of 2,000 mPas. When mounted on the supplied plate stand, the set is suitable for longer, unattended runs using a timer, without the need to purchase an additional stand separately.Add a tool with a temperature sensor if requiredIf a single tool with a temperature sensor is not sufficient for several parallel runs, the identical S 25 EC - T - C - 18 G ST variant is available as an additional purchase option. This allows temperature measurement to be utilised even when a second tool is being cleaned or autoclaved between two batches, whilst the first is already back in use.For hygiene-sensitive and automated applicationsThe brushless motor operates without carbon brushes and can be easily cleaned between batches. In combination with the temperature measurement on the supplied tool and the network interfaces for connection to higher-level systems, the set is suitable for compact applications requiring automation, where heat-sensitive samples and high hygiene standards are combined.Typical areas of applicationAn entry-level option into the T-25 mini-control series without the need to select a separate toolDispersion of temperature-sensitive samples using a ready-to-use measuring toolStationary operation on the supplied stand for longer test seriesAutomated documentation via the existing network interfacesSelection guide: this set or another T-25 solution?If you already own the probe and stand, you’ll save money by opting for the T 25 mini control ULTRA-TURRAX drive unit alone rather than this set. Those who do not require temperature measurement or networking will find the T 25 easy clean control Solution to be a more powerful set, featuring 500 watts and a larger drive unit. For simpler applications without control functions or temperature measurement, the T-18 series with the T 18 brushless digital Solution is the more cost-effective alternative.Technical detailsMotor power input / output210 W / 160 WProcessable volume (H₂O)0.001 to 1.5 lMax. viscosity2,000 mPasSpeed range600 to 25,000 rpmSpeed deviation±3 % (above 3,000 rpm), ≤±100 rpm (below 3,000 rpm)Motor typebrushless, direct currentNoise level without tools75 dB(A)Temperature measurement range0 to 125 °CTemperature measurement accuracy±1 KProbe diameter / probe length13 mm / 160 mmInterfacesUSB-C, RS232, WPAN, Wi-Fi, EthernetProtection ratingIP 30 in accordance with DIN EN 60529Power ratings100 to 240 V, 50/60 Hz, 210 W (max. 250 W, standby 3 W), 48 V= / 4,500 mADimensions (W x H x D) of the drive unit66 x 186 x 100 mmWeight of drive unit1.8 kgSupplied mixing toolS 25 EC - T - C - 18 G, with temperature sensorContentsT 25 mini control ULTRA-TURRAX drive unitS 25 EC - T - C - 18 G mixing tool with temperature sensor (ID no. 0020108998)R 1826 plate stand (ID No. 0003160100)R 182 cross-sleeve (ID No. 0002657700)Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe T 25 mini control Solution is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service will assemble any additional tools or accessories.
IKA T 10 Battery-powered Portable Solution Disperser Set, 0.5 to 100 ml, up to 30,000 rpm, 0010015684
The T 10 battery Portable Solution combines the battery-powered T 10 battery ULTRA-TURRAX disperser with a matching dispersing tool to form a ready-to-use set. For those looking for a basic mobile kit for sampling outside the laboratory, this eliminates the need to select a tool separately from the range of accessories.What’s included in the setIn addition to the drive unit, the set includes an S 10 N - 5 G dispersing tool, a reusable stainless steel tool with a diameter of 5 millimetres. You can start using it straight out of the box, without having to order a suitable tool size separately beforehand. A stand and clamp are not included in this starter set; those wishing to work in a stationary setup will find the appropriate equipment in the T 10 battery Complete Solution.Battery operation for mobile useThe battery consists of three permanently fitted LiPo cells with a voltage of 10.8 volts and an energy capacity of 34.56 watt-hours; it is charged via a USB-C cable or charging clamp. The device remains operational even without a power socket within reach. The speed can be adjusted continuously between 8,000 and 30,000 revolutions per minute via the LCD display, whilst a timer facilitates reproducible process steps.Brushless motor for quiet operationThe brushless DC motor operates at a noise level of 65 dB(A) without a tool attached and draws a maximum of 45 watts when charging from the mains; during actual use, the motor is powered solely by the battery. The working volume ranges from 0.5 to 100 millilitres (H₂O), and the maximum viscosity is 200 mPas.Add accessories as requiredIf your requirements exceed those of the supplied S 10 N - 5 G tool, further dispersing tools from the same T-10 series are available in other diameters, as well as an R 104 stand with an H 44 cross-sleeve for a later switch to stationary operation. Those who require this equipment from the outset can avoid having to purchase additional items later and opt directly for the T 10 Battery Complete Solution.Typical applicationsSampling in the field or on site visits without mains powerHomogenisation of small volumes directly at the sampling siteMobile quality control with a dedicated toolSelection guide: Portable, Complete or Tissue Safe?The Portable Solution is the most compact of the three T-10 battery sets, designed for anyone looking for a ready-to-use basic set without a stand. Those who also wish to work in a stationary setup with a stand and clamp will find the right equipment in the T 10 battery Complete Solution. Those who primarily process tissue samples and need to prevent cross-contamination between samples are better served by the disposable tools of the T 10 battery Tissue Safe Solution. The drive unit alone, without tools, is available as the T 10 battery ULTRA-TURRAX; for mains operation without a battery, it is available as the T 10 basic ULTRA-TURRAX.Technical detailsMotor power input / output30 W / 25 WProcessable volume (H₂O)0.5 to 100 mlMax. viscosity200 mPasSpeed range8,000 to 30,000 rpm, continuously variable (5% deviation)Speed displayLCDMotor typebrushless, direct currentNoise level without tools65 dB(A)Boom diameter / boom length8 mm / 100 mmDuty cycleON 10 mins, OFF 5 minsTimerYes, LCD displayPermissible ambient temperature / humidity5 to 40 °C / 80 %Protection classIP 30 in accordance with DIN EN 60529USB interfaceUSB-CCharging input15 V =, max. 45 W, 3,000 mABattery typeCustom LiPo, 3 cells, type 18650-3S1PBattery capacity34.56 WhBattery voltage10.8 VBattery installationpermanently fittedDimensions (W x H x D) of drive unit53 x 239 x 70 mmWeight of drive unit0.5 kgDispersing tool suppliedS 10 N - 5 G, reusable, stainless steel, 5 mmContentsT 10 battery ULTRA-TURRAX drive unit including permanently fitted batteryS 10 N - 5 G mixing tool, reusable, stainless steel, 5 mmRegulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). It contains a permanently installed lithium battery and, together with the battery, must not be disposed of with household waste. The WEEE registration number of the manufacturer IKA is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe T 10 battery Portable Solution is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For additional accessories such as further dispersing tools, a stand or a clamp, LT Laborhandel’s procurement service will handle the assembly.
IKA T 18 mini digital ULTRA-TURRAX disperser, 1 to 1,500 ml, 3,000 to 25,000 rpm, 0025005828
Not every application requires the full power of the larger T 18 units. For those who mainly homogenise low-viscosity samples and have limited bench space in their fume cupboard, the T 18 mini digital ULTRA-TURRAX offers a compact drive unit from the same series, which is noticeably lighter and smaller than its brushless counterpart.Compact design, lower power ratingThe drive unit measures 66 x 186 x 100 millimetres and weighs 1.8 kilograms, meaning it can be accommodated even in confined spaces. The motor draws 210 watts and delivers 160 watts; as with the larger model, the processable volume ranges from 0.001 to 1.5 litres (H₂O), with a maximum viscosity of 2,000 mPas. This makes the unit particularly suitable for low-viscosity samples; for more viscous samples, the more powerful T 18 brushless digital, with a maximum viscosity of 5,000 mPas, is the more appropriate choice.Brushless motor with digital displayLike the larger models in the series, the T 18 mini digital operates with a brushless DC motor; the speed can be continuously adjusted between 3,000 and 25,000 revolutions per minute, with a tolerance of 3 per cent. The speed and timer are controlled via a digital display. The unit is powered by 100 to 240 volts at 50 or 60 hertz; a USB-C interface connects it to a computer for remote control and documentation using labworldsoft.Tools from the S-18 seriesA dispersing tool is not included with the T 18 mini digital and must be selected to suit the application, for example as a reusable stainless steel tool such as the S 18 N - 10 G or S 18 N - 19 G, or as a disposable plastic tool such as the S 18 D - 10 G - KS and S 18 D - 14 G - KS for switching between samples without the need for cleaning. For stationary operation, plate stands from the R-1825 series with R 182 cross-sleeve are available; for securing the instrument during operation, the RH 3 clamping holder is used.Cost-effective alternative for routine tasksCompared to the T 18 brushless digital, the T 18 mini digital offers slightly less power reserve but is nevertheless suitable for most routine tasks involving low-viscosity samples, such as in training or for recurring standard processes. Its compact dimensions and low weight of 1.8 kilograms make it easy to move between multiple workstations, without the need for a separate unit at each location.Typical applicationsHomogenisation of low-viscosity samples in a limited footprintSimple emulsification and dispersion tasks in routine work and trainingMobile use between multiple workstations thanks to its compact designReproducible short runs with a timerSelection guide: mini, brushless or with temperature measurement?If the power of the T 18 mini digital is insufficient – for example, with higher viscosities or larger batches – the T 18 brushless digital, with 400 watts and a range of up to 5,000 mPas, is the more powerful alternative; it is also available as the T 18 brushless digital Solution, complete with tool and stand. For those who also need to monitor the sample temperature during dispersion, this function is available in the T-25 series, for example in the T 25 mini control ULTRA-TURRAX.Technical detailsMotor power input / output210 W / 160 WProcessable volume (H₂O)0.001 to 1.5 lMax. viscosity2,000 mPasSpeed range3,000 to 25,000 rpm, continuously variable (tolerance 3 %)Speed displayDigital displayMotor typebrushless, direct currentNoise level without tools75 dB(A)Extension arm diameter / extension arm length13 mm / 160 mmDuty cycle100 %Protection classIP 30 in accordance with DIN EN 60529USB interfaceUSB-CPower rating100 to 240 V, 50/60 Hz, 210 W (max. 250 W, standby 3 W), 48 V= / 4,500 mADimensions (W x H x D)66 x 186 x 100 mmWeight1.8 kgPermissible ambient temperature / humidity5 to 40 °C / 80 %ContentsT 18 mini digital ULTRA-TURRAX drive unitAccording to the manufacturer, a mixing tool is expressly not included in the scope of delivery and must be selected separately from the S-18 series range of accessories.Regulatory informationThe unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe IKA manufacturer’s warranty applies to the T 18 mini digital: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service can put together suitable dispersing tools and stands as required.
IKA T 10 battery-powered Tissue Safe Solution disperser set, disposable tools, up to 30,000 rpm, 0010015690
When working with tissue samples, it is important not only to ensure homogenisation but also to prevent any material from being transferred between two samples. The T 10 battery Tissue Safe Solution comes with an autoclavable, single-use dispersing tool made of plastic and stainless steel, which is disposed of after use rather than being cleaned and reused.Set of 24 disposable toolsThe scope of delivery includes a pack of 24 S 10 D - 7G - KS - 65 tools, each with a diameter of 7 millimetres. Each tool is individually packaged, used once and then disposed of. For a series involving different tissue samples, there is no need for cleaning between individual runs, which correspondingly reduces the risk of material carry-over between samples.Battery-powered instead of mains-poweredThe tool is powered by the T 10 battery ULTRA-TURRAX, which features a permanently installed battery comprising three LiPo cells, rated at 10.8 volts and with an energy capacity of 34.56 watt-hours. Charging is carried out via a USB-C cable or a separate charging clamp; the device does not require a mains socket whilst in use. The speed is continuously adjustable from 8,000 to 30,000 revolutions per minute; an LCD display shows the speed and timer numerically.Autoclavable for sterile applicationsAs the dispersing tool is autoclavable, it can be sterilised before use if a process so requires. After use, it is disposed of rather than cleaned, which saves time compared with manually cleaning a reusable tool between two tissue samples.Integration with labworldsoftAccording to the manufacturer, just like the drive unit on its own, the Tissue Safe Solution can also be integrated into the labworldsoft software for remote control, data export and documentation of process parameters. Operating instructions for the T 10 battery are available in 13 languages, and there is a separate set of instructions for the single-use dispersing tool.Also available as a larger disposable versionIn addition to the S 10 D - 7G - KS - 65 tool included in the set, with a diameter of 7 millimetres, LT Laborhandel also stocks the S 10 D - 7G - KS - 110 version with a larger working diameter as a standalone item, also available in packs of 24. Those who regularly process tissue samples of varying sizes can therefore keep both tool sizes in stock.Typical applicationsHomogenisation of tissue samples in pathological or pharmaceutical sample preparationBatch processing of multiple samples without the need for intermediate cleaning of the toolSterile homogenisation thanks to the autoclavable, single-use toolSelection guide: Tissue Safe, Portable or Complete?If you need to rule out cross-contamination between tissue samples, the Tissue Safe Solution and its disposable tools are the right choice. If a reusable stainless steel tool is sufficient, the T 10 battery Portable Solution is the more cost-effective option. Those who also require a stand for stationary use will find it in the T 10 battery Complete Solution. The drive unit alone, without the tool, is available as the T 10 battery ULTRA-TURRAX.Technical detailsMotor power input / output30 W / 25 WProcessable volume (H₂O)0.5 to 100 mlMax. viscosity200 mPasSpeed range8,000 to 30,000 rpm, continuously variable (5 per cent deviation)Speed displayLCDMotor typebrushless, direct currentNoise level without tools65 dB(A)Boom diameter / boom length8 mm / 100 mmDuty cycleON 10 mins, OFF 5 minsTimerYes, LCD displayPermissible ambient temperature / humidity5 to 40 °C / 80 %Protection classIP 30 in accordance with DIN EN 60529USB interfaceUSB-CCharging input15 V =, max. 45 W, 3,000 mABattery typeCustom LiPo, 3 cells, type 18650-3S1PBattery capacity34.56 WhBattery voltage10.8 VBattery installationpermanently fittedDimensions (W x H x D) of drive unit53 x 239 x 70 mmWeight of drive unit0.5 kgDispersing tool suppliedS 10 D - 7G - KS - 65, single-use, autoclavable, plastic/stainless steel, 7 mm, 24 piecesContentsT 10 battery ULTRA-TURRAX drive unit including permanently fitted batteryS 10 D - 7G - KS - 65 mixing tool, single-use, 24 pieces, ID no. 0020002076Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). It contains a permanently installed lithium battery and, together with the battery, must not be disposed of as household waste. The WEEE registration number of the manufacturer IKA is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and Procurement ServiceThe T 10 battery Tissue Safe Solution is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years if registered at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service will organise the supply of disposable instruments or additional accessories.
IKA UTL 25 digital Inline ULTRA-TURRAX, continuous-flow disperser, 0010006856
Process reliability in continuous operation: The IKA UTL 25 digital Inline ULTRA-TURRAX The IKA UTL 25 digital (MPN 0010006856) represents a specialised class of high-performance laboratory dispersers. Whilst conventional batch dispersers (immersion units) are held directly in an open beaker, the UTL 25 digital operates on the inline principle (continuous flow). This makes it an indispensable tool for simulating industrial-scale processes, for producing ultra-fine emulsions without air entrapment, and for the safe processing of critical substances in closed systems. With a speed range of up to 25,000 min⁻¹ and proven rotor-stator technology, this unit bridges the gap between laboratory experiments and pilot-scale operations. The inline principle: why continuous flow rather than batch? The IKA UTL 25 digital differs fundamentally from conventional agitators. In inline dispersion, the medium is not swirled in an open vessel but is pumped through a closed working chamber (or conveyed by the suction effect of the rotor). This offers decisive advantages for demanding applications: Prevention of air ingress: In open vessels, a ‘Trombe’ (vortex) often forms, drawing air into the product. This is undesirable in the case of creams, lotions or oxidation-sensitive substances. The UTL 25’s closed system effectively prevents this. Controlled shearing: In batch operation, some particles pass through the shearing zone frequently, whilst others do so rarely. In inline operation, every particle must pass through the rotor-stator gap before leaving the outlet. This guarantees an extremely homogeneous particle size distribution and reproducibility. Safety: As the system is sealed by hose connections, no vapours or aerosols escape. This is essential when working with toxic or volatile solvents. Performance and digital control At the heart of the IKA UTL 25 digital is a powerful drive with a power consumption of 500 watts. It enables speeds ranging from 3,000 to 25,000 rpm. The high circumferential speed of the rotor tips generates enormous shear forces, which reliably break down droplets and particles to the micro- or even nano-scale. The ‘digital’ designation stands for ease of use and process monitoring: LED display: The speed is clearly displayed, enabling the precise setting of experimental parameters. Timer function: You can set process times to carry out standardised test series (SOPs). Interface: The device can be controlled and monitored via USB (using the optional labworldsoft software®) to document speed-time profiles. Scalability: From the laboratory to production A key area of application for the IKA UTL 25 digital is ‘upscaling’. In the chemical and pharmaceutical industries, products are often manufactured in large-scale inline machines (e.g. the IKA 2000 series). If you carry out development work in the laboratory using a simple beaker stirrer, the results often cannot be transferred to large-scale production. The UTL 25 digital simulates the fluid dynamics and shear conditions of large-scale machines on a laboratory scale. A formulation successfully developed here is highly likely to scale up to production plants without any problems. This saves time and costs in process development. Flexibility in setup: recirculation vs. single-pass The instrument offers maximum flexibility when conducting experiments: Recirculation (loop): The outlet is reconnected to the inlet vessel via a hose. The product passes through the shear zone multiple times (‘multipass’). Ideal for achieving very narrow particle size distributions. Single-pass: The product is conveyed once from a feed vessel through the machine into a collection vessel. Ideal for continuous processes or where shear sensitivity is critical. The rotor’s flow capacity is often sufficient to draw in low-viscosity media automatically. For higher-viscosity media, an upstream pump may be necessary to ensure flow. Durability and cleaning The working chamber and the dispersing tool are made of high-quality stainless steel and are chemical-resistant. Cleaning is extremely simple: it is often sufficient to rinse the system whilst it is closed using a suitable solvent or cleaning agent (CIP – Cleaning in Place). However, the dispersion chamber can also be dismantled for thorough cleaning or sterilisation. An optional temperature sensor (PT 1000) can be connected directly to the unit to monitor the product temperature at the outlet – an important feature, as high shear forces always generate heat. Application examples Cosmetics: Production of ultra-fine emulsions for creams and lotions without air pockets. Food: Homogenisation of dairy products, juices or sauces. Chemicals: Dispersing pigments in paints or varnishes in a continuous flow. Pharmaceuticals: Cell disruption or the production of active ingredient suspensions. In summary, the IKA UTL 25 digital is the professional solution for laboratories that need to go beyond simple stirring. It brings the benefits of industrial in-line production to your laboratory bench. Technical data Motor power input/output: 500 W / 300 W Speed range: 3,000 – 25,000 rpm Max. viscosity: 5,000 mPas Flow rate (H₂O): 4.4 – 11.6 l/min (depending on the tool/setup) Display: LED Timer: Yes Volume range (circulation): unlimited (depending on the container) Interface: USB Connection for external temperature sensor: Yes (PT 1000) Dimensions (W x H x D): 87 x 271 x 106 mm Weight: 2.5 kg Protection class: IP 20 Contents of delivery 1 x IKA UTL 25 digital (drive unit) 1 x dispersion chamber (DK 25.11 generator) 1 x tripod pole 1 x USB cable 1 x User manual Individual requirements & accessories To set up a complete recirculation system, you will need tubing, stand components and, if necessary, a suitable container. Adapters for batch operation are also available. Please contact our procurement service for advice on the appropriate setup.
IKA T 25 digital Solution Disperser Set, 1 to 2,000 ml, 3,000 to 25,000 rpm, 0010004858
For those looking for a basic dispersing kit without having to order tools and a stand separately, the T 25 digital Solution offers a set that is ready for immediate use. It is based on the same drive unit as the separately available T 25 digital ULTRA-TURRAX and includes a dispersing tool, plate stand and cross-coupling, so that homogenisation and formulation trials can begin without the need for additional orders. IKA itself describes the underlying series as a timeless classic in its dispersing range.What else is included in the setIn addition to the drive unit (Ident 0003725000), the set includes an S 25 N - 25 G (Ident 0001713300), an R 1826 plate stand (Ident 0003160100) and an R 182 cross-coupling (Ident 0002657700). The tool is a reusable stainless steel tool; the stand securely holds the drive unit, thereby allowing stationary work with both hands free, without having to hold the unit during operation. Compared with the drive unit on its own, this eliminates the need to select the tool size, stand type and mounting separately – a factor that saves time when setting up a new workstation for the first time.Drive performance dataThe drive unit included in the set covers a speed range of 3,000 to 25,000 rpm with a tolerance of 1 per cent; the power input is 800 watts and the power output is 500 watts. The maximum viscosity is 5,000 mPas, and the processable volume ranges from 0.001 to 2 litres (H₂O). The set operates at 220 to 240 volts at 50 or 60 hertz; a voltage variant of 100 to 120 volts is also available, with protection class IP 20 in accordance with DIN EN 60529. Without a tool attached, the drive remains comparatively quiet at 75 dB(A).Who will benefit from this complete setThe combination of drive unit, tool and stand is ideal for getting started with homogenisation in sectors such as cosmetics, pharmaceuticals and chemicals – wherever a ready-assembled workstation delivers results more quickly than purchasing components individually. On the other hand, those who already have their own tools or a stand can save on the cost of a double purchase by opting for the drive unit alone. Should requirements later exceed those met by the supplied tool, the S 25 N - 25 G can be swapped for other sizes from the T-25 range at any time, without having to change the stand or the drive.Typical areas of applicationPreparation of emulsions and suspensions in cosmetics developmentHomogenisation of pharmaceutical formulations in stand-mounted operationGetting started with dispersion technology without the need for additional purchasesTraining and educational environments with equipment ready for immediate useSelection guide: Set or individual drive unitIf the tool and stand are already available, the single T 25 digital ULTRA-TURRAX drive unit is sufficient. For smaller volumes requiring temperature measurement, the T 25 mini control ULTRA-TURRAX is the more compact alternative; those seeking a housing design that is easier to clean will find it in the T 25 easy clean control. If the volume range up to 2 litres is no longer sufficient, the T 50 digital ULTRA-TURRAX can handle batches of up to 30 litres.Technical detailsMotor power input / output800 W / 500 WProcessable volume (H₂O)0.001 to 2 lSpeed range3,000 to 25,000 rpm, continuously variable (1 per cent deviation)Max. viscosity5,000 mPasSpeed displayLEDNoise level (without tools)75 dB(A)Boom diameter / boom length13 mm / 160 mmProtection classIP 20 in accordance with DIN EN 60529Rated power220 to 240 V, 50/60 Hz, 800 W (additional voltage variant 100 to 120 V available)Dimensions (W x H x D) of drive unit87 x 271 x 106 mmWeight of drive unit2.5 kgIncluded dispersing toolS 25 N - 25 G, stainless steelContentsT 25 digital ULTRA-TURRAX drive unit (ID 0003725000)S 25 N - 25 G dispersing tool (ID 0001713300)R 1826 plate stand (ID 0003160100)R 182 cross-sleeve (ID 0002657700)Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe T 25 digital Solution is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years if registered at ika.com/register within 90 days of purchase. For additional or alternative accessories, such as different tool sizes or a larger stand, LT Laborhandel’s procurement service will assemble the required components.
IKA T 10 battery ULTRA-TURRAX cordless disperser, 0.5 to 100 ml, up to 30,000 rpm, 0020103418
According to the manufacturer, the IKA T 10 battery ULTRA-TURRAX is IKA’s first battery-powered, cordless disperser. The unit operates independently of a mains socket and can therefore also be used under a fume cupboard, in a laminar flow cabinet or directly at the sampling point. As with the T 10 basic, the processing volume ranges from 0.5 to 100 millilitres (H₂O), and the speed from 8,000 to 30,000 revolutions per minute.Rechargeable battery instead of a mains cableThree permanently installed 18650-type LiPo cells, with a total voltage of 10.8 volts and a capacity of 34.56 watt-hours, power the brushless DC motor. The battery weighs 160 grams and charges via a USB-C cable or a separate charging clip; whilst charging, the maximum power consumption is 45 watts, the charging voltage is 15 volts DC and the current draw is 3,000 milliamps. ‘Permanently fitted’ means that the battery is not designed to be replaced by users.LCD display and lower motor powerInstead of the scale found on the T 10 basic, an LCD display shows the speed and timer numerically, which facilitates reproducible settings. When plugged in, the device draws a maximum of 30 watts and delivers 25 watts to the motor – significantly less than the mains-powered T 10 basic, which has a power consumption of 125 watts. Accordingly, the maximum viscosity that can be processed is 200 mPas, which is lower than the 5,000 mPas of the basic model. This is sufficient for low-viscosity to medium-viscosity samples; for very viscous samples, the T 10 basic remains the more suitable choice.Integration with labworldsoftAccording to the manufacturer, the T 10 battery can be integrated into the labworldsoft software for remote control, data export and documentation of process parameters. Operating instructions are available in twelve languages, ranging from German and English to Chinese, Japanese and Turkish.Slim, lightweight and cable-freeMeasuring 239 millimetres in length, 53 millimetres in width and 70 millimetres in depth, the housing is slightly longer than that of the T 10 basic, as the battery is housed in the handle. Nevertheless, its weight of 0.5 kilograms is less than that of the mains-powered model at 0.61 kilograms; indeed, there is no need for a cable to the mains adaptor whilst working.Typical applicationsOn-site sampling without a power socket within reachHomogenisation of tissue structures for sample preparation prior to pharmaceutical extractionsWorking under a safety cabinet or in a laminar flow cabinetDispersion directly in microcentrifuge tubesSelection guide: Single unit or set?If you already have a stand, clamp and dispersing tool in your laboratory, the drive unit on its own will suffice. For a mobile starter kit, the following three sets are available: the T 10 battery Portable Solution with a dispersing tool for use on the move; the T 10 battery Complete Solution with an additional stand and cross-coupling for stationary use; or the T 10 battery Tissue Safe Solution with disposable tools for tissue samples and protection against cross-contamination. On the other hand, those who work on the mains anyway can save on the initial purchase cost with the T 10 basic ULTRA-TURRAX and benefit from the higher viscosity limit of 5,000 mPas.Technical detailsMotor power input / output30 W / 25 WProcessable volume (H₂O)0.5 to 100 mlMax. viscosity200 mPasSpeed range8,000 to 30,000 rpm, continuously variable (5% deviation)Speed displayLCDMotor typebrushless, direct currentNoise level without tools65 dB(A)Boom diameter / boom length8 mm / 100 mmDuty cycleON 10 mins, OFF 5 minsTimerYes, LCD displayPermissible ambient temperature / humidity5 to 40 °C / 80 %Protection classIP 30 in accordance with DIN EN 60529USB interfaceUSB-CDevice power consumptionmax. 45 W, standby 0.1 WCharging input15 V=, 3,000 mABattery typeCustom LiPo, 3 cells, type 18650-3S1PBattery weight160 gBattery capacity34.56 WhBattery voltage10.8 VBattery installationpermanently fittedDimensions (W x H x D)53 x 239 x 70 mmWeight0.5 kgContentsT 10 battery ULTRA-TURRAX drive unit including permanently fitted battery, ID no. 0020103418A mixing tool is not included in the scope of delivery and must be selected separately from the range of accessories to suit the application.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). It contains a permanently installed lithium battery and, together with the battery, must not be disposed of as household waste. The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and Procurement ServiceThe T 10 battery is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years if registered at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service will put together a selection of suitable dispersing tools, stands and clamps.
IKA UTTD control Life Science Solution Disperser Set, DT-20 dispersing vessel, 400 to 8,000 rpm, 0010013296
When it comes to homogenising tissue samples in life sciences research, one thing matters above all else: a reproducible, consistent result with no carry-over between samples. The UTTD control Life Science Solution combines the controllable ULTRA-TURRAX Tube Drive P control with DT-20 disposable dispersing vessels, each of which comes with its own rotor-stator assembly. Each sample is processed in its own vessel, which is disposed of after use, thereby ruling out cross-contamination between batches and eliminating the need for cleaning between runs.DT-20 dispersion vessels with their own rotor-stator assemblyThe set contains 25 DT-20 single-use dispersion vessels, each with a volume of 20 millilitres. Each vessel comes with its own rotor-stator assembly, which, when fitted to the drive, ensures rapid and uniform homogenisation of tissue, cartilage and bone samples. The hermetically sealable vessel serves simultaneously as a dispersing, storage and transport container; sample collection or the addition of media is carried out via a pierceable membrane in the lid, without having to open the vessel completely. Because each tube has its own rotor-stator assembly, the results do not vary from sample to sample due to wear or residues on the tool – a crucial factor in precision applications within bioscientific research.OLED control for repeatable homogenisation protocolsThe ULTRA-TURRAX Tube Drive P control covers a speed range of 400 to 8,000 revolutions per minute, adjustable in 10-rpm increments with a deviation of just 3 per cent, and is read and controlled via an OLED display. For research protocols that need to be reproduced exactly, time, energy and volume can be saved as experimental conditions; a turbo button boosts the speed to the maximum for short, intensive homogenisation steps. The drive can be connected to a computer via the USB-B interface, for example to the Labworldsoft laboratory equipment software. Measuring 122 x 54 x 178 millimetres and weighing 1.3 kilograms, the device remains compact on the laboratory bench; the power supply unit delivers 24 V DC at 1500 mA.Typical applicationsHomogenisation of tissue, cartilage and bone samples for precision life science applicationsLife sciences research involving repeatable protocols and documented experimental conditionsBatch experiments in which each sample is processed in its own, non-reusable vesselPreparation of tissue homogenates for downstream molecular biological analysesAs each DT-20 vessel comes with its own rotor-stator assembly, there is no need to clean the instrument itself between samples; only the drive remains in continuous operation. This reduces the time between two samples to simply loading the next tube, making throughput predictable for larger sample series.Selection guide: Life Science Solution or other UTTD setsThis set is designed for the homogenisation of tissue samples using a rotor-stator assembly. For tablet disintegration in accordance with pharmacopoeia procedures, the UTTD control Pharma Solution with dissolver mixing vessels is more suitable; for IVD tissue samples taken directly from the surgical workflow requiring a simpler drive, the UTTD basic Tissue Solution with a ball-mixing vessel is recommended. Anyone wishing to reorder DT-20 vessels in larger volumes or different pack sizes, or who requires additional stirring and ball-mixing vessels for other tasks, will find the ULTRA-TURRAX Tube Drive P control drive unit or the ready-to-use Tube Drive P control Workstation as suitable alternatives.Technical detailsMotor power consumption (drive)36 WMotor power output (drive)28 WSpeed displayOLEDSpeed range400 to 8,000 rpmSpeed adjustment10-rpm incrementsSpeed deviation3 %TimerYes, OLED displayUSB interfaceUSB-BMax. viscosity5,000 mPasNoise level (without tools)50 dB(A)Process typebatchVolume of DT-20 dispersion vessel20 mlPermissible ambient temperature range5 to 40 °CPermissible relative humidity80 %Protection classIP 20 in accordance with DIN EN 60529 (actuator)Rated values100 to 240 V, 50/60 Hz, 36 W, 24 V=/ 1500 mA power supply unitScope of deliveryULTRA-TURRAX Tube Drive P control drive unitDT-20 mixing vessel with disperser element, 20 ml, pack of 25The pack of 25 vessels is sufficient for a medium-sized series of experiments; additional DT-20 vessels can be reordered as required for the current project.Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe IKA manufacturer’s warranty applies to the drive unit of the UTTD control Life Science Solution: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. Reorders of the DT-20 dispersion vessel in other pack sizes, as well as additional accessories, are handled by the procurement service at LT Laborhandel; on request, this includes qualification documentation (IQ/OQ) for research environments where documentation is required.
IKA T 18 brushless digital ULTRA-TURRAX disperser, 1 to 1,500 ml, 3,000 to 25,000 rpm, 0020102476
A batch volume of up to 1.5 litres covers many tasks in the laboratory where smaller benchtop units reach their limits, such as homogenising larger sample volumes in process development or mixing emulsions for quality control. The T 18 brushless digital ULTRA-TURRAX is the drive unit in the IKA T 18 series designed specifically for this application, featuring a brushless DC motor and a speed that can be continuously adjusted between 3,000 and 25,000 revolutions per minute.Brushless motor for continuous operationThe motor draws 400 watts and delivers 300 watts, designed for a 100 per cent duty cycle. Without an attachment fitted, the noise level is 70 dB(A) and the speed deviation is 2 per cent. The unit displays the speed and timer via an LED display. With a viscosity of up to 5,000 mPas, the T 18 brushless digital can also process thicker samples; the processable volume ranges from 0.001 to 1.5 litres, based on water.Compact arm, remote control via USBThe arm measures 13 millimetres in diameter and 160 millimetres in length. The drive unit itself measures 89 x 270 x 161 millimetres and weighs 3 kilograms, meaning it can be accommodated even in smaller fume cupboards. It is connected to a 220 to 240-volt supply at 50 or 60 hertz with a power consumption of 400 watts; a voltage variant for 100 to 120 volts is also available. A micro-USB interface connects the drive to a computer, enabling remote control and experiment documentation using the labworldsoft software.Accessories for tool changes and documentationSeveral dispersing tools from the S-18 series are available for the T 18 brushless digital, including reusable stainless steel versions such as the S 18 N - 10 G and S 18 N - 19 G, as well as disposable plastic tools for switching between samples without the need for cleaning. For stationary operation, IKA supplies suitable bench stands from the R-1825 series with the R 182 cross-sleeve; for securing the instrument during operation, the RH 3 clamping holder is provided. Those working in regulated environments can also request factory calibration certificates and IQ/OQ documentation for instrument and process qualification.Typical applicationsEmulsifying and homogenising larger sample volumes in development and quality controlDispersing and suspending with particle size reduction down to the micrometre rangeReproducible batch testing thanks to a timer and infinitely variable speed controlVarying tasks with different dispersing tools thanks to the quick-release couplingSelection guide: Drive unit only or complete set?Those who already have suitable dispersing tools in stock or prefer to make their own selection will find this drive unit a good choice; a tool is not included in the scope of delivery. Those who, on the other hand, want to be ready to go straight away will find the T 18 brushless digital Solution, which comes fully equipped with a tool, shaft and stand. For smaller volumes and simpler applications with lower viscosity, the more compact T 18 mini digital ULTRA-TURRAX is the more economical alternative. Those who regularly process larger batches of up to 2 litres will find the more powerful T 25 digital ULTRA-TURRAX – with 800 watts of motor power – to be the ideal successor model.Technical detailsMotor power input / output400 W / 300 WProcessing volume (H₂O)0.001 to 1.5 lMax. viscosity5,000 mPasSpeed range3,000 to 25,000 rpm, continuously variable (2 per cent deviation)Speed displayLEDMotor typebrushless, direct currentNoise level without tools70 dB(A)Boom diameter / boom length13 mm / 160 mmDuty cycle100 %TimerYes, LED displayPermissible ambient temperature / humidity5 to 40 °C / 80 %Protection classIP 30 in accordance with DIN EN 60529USB interfaceMicro-USBPower rating220 to 240 V, 50/60 Hz, 400 W (100 to 120 V version available)Dimensions (W x H x D)89 x 270 x 161 mmWeight3 kgContentsT 18 brushless digital ULTRA-TURRAX drive unitAccording to the manufacturer, a mixing tool is expressly not included in the scope of delivery and must be selected separately from the range of accessories, for example from the S-18 tool series.Regulatory informationThis unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe IKA manufacturer’s warranty applies to the T 18 brushless digital: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service can put together suitable dispersing tools, stands and other accessories as required.
IKA ULTRA-TURRAX Tube Drive single-use dispersion system, 300 to 6,000 rpm, up to 5,000 mPas, 0003646000
Samples contaminated with pathogens, toxic substances or strong odours quickly push an open dispersion system to its limits. Cleaning is required after every run, and a residual risk of cross-contamination remains. The ULTRA-TURRAX Tube Drive solves this problem by using sealed, single-use tubes that are fitted directly onto the drive unit. Homogenisation, dispersion, stirring and grinding take place within the hermetically sealed vessel; the tube then serves as both a transport and storage container. For pathology, human and veterinary medicine, food analysis and related fields of research, this means sample processing without the need for open handling of the material.Drive unit without a display, designed for routine operationThe speed is continuously adjustable between 300 and 6,000 revolutions per minute, read off a scale rather than a display. The motor’s power consumption is 20 watts, with 17 watts output; this is sufficient for samples with a viscosity of up to 5,000 mPas. Without a tool attached, the unit remains quiet at 50 dB(A), a level that is barely noticeable when used next to a fume cupboard. Anyone looking for a robust solution without menu navigation, and who sets the speed based on experience rather than display readings, will be well served by this basic model from the Tube-Drive range.Compact design for a spot next to the workbenchMeasuring 100 x 40 x 160 millimetres and weighing 0.75 kilograms, the drive unit takes up very little floor space. An external power supply provides 24 V DC at 800 mA; the unit itself operates on 100 to 240 V at 50 or 60 Hz and draws 20 watts. An IP 20 protection rating in accordance with DIN EN 60529 and a permissible operating range of 5 to 40 degrees Celsius at up to 80 per cent relative humidity make it suitable for use in a laboratory or an air-conditioned adjoining room, but not for field applications. The speed deviation is 10 per cent; this is sufficient for simple homogenisation and the grinding process in sealed tubes, as it is not the exact speed that matters here, but the result achieved after a fixed running time.Typical applicationsDigestion and homogenisation of tissue, blood and cell samples in human and veterinary medicineSample preparation in pathology and at animal health institutesTesting of food samples for pathogens or residuesResearch in toxicology, pharmaceutical biology, biochemistry and tumour biology, where cross-contamination between batches must be ruled outChemistry and cosmetics laboratories carrying out recurring small-scale preparationsSuitable single-use mixing vessels are available as separate accessories for all the areas mentioned, including stirring (ST), dispersing (DT) and bead mixing vessels (BMT) in 20 and 50 millilitres, as well as sterile IVD variants. If you already know the sample volume and the type of processing required, you can select the appropriate tube directly.Selection guide: Basic model or P controlThe Tube Drive is the entry-level model in the range, featuring a scale display but without programmable settings. Those requiring recurring protocols with fixed time, energy and speed settings, or wishing to use a turbo button for short, intensive runs, will find what they need in the ULTRA-TURRAX Tube Drive P control version, which features an OLED display and a speed range of 400 to 8,000 rpm. Those who also want ready-to-use consumables should opt for the Tube Drive P control Workstation. For tissue samples from the surgical workflow, the UTTD basic Tissue Solution, featuring an IVD-certified sample vessel, is based on this basic model.Technical detailsMotor power input20 WMotor power output17 WSpeed displayScaleSpeed range300 to 6,000 rpmSpeed deviation10 %Speed adjustmentcontinuously variableMax. viscosity5,000 mPasNoise level (without tools)50 dB(A)Process typebatchPermissible ambient temperature range5 to 40 °CPermissible relative humidity80 %Protection classIP 20 in accordance with DIN EN 60529Dimensions (W x H x D)100 x 40 x 160 mmWeight0.75 kgPower rating100 to 240 V, 50/60 Hz, 20 W, 24 V DC power supply=/ 800 mAContentsULTRA-TURRAX Tube Drive drive unitRemoval hookDisposable mixing vessels from the ST, DT and BMT series are not included in the scope of delivery and must be ordered separately to suit the application and the required volume. For sterile applications relating to in vitro diagnostics, gamma-sterilised versions of the mixing vessels are also available.Regulatory informationThe device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer IKA is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe ULTRA-TURRAX Tube Drive is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years if registered at ika.com/register within 90 days of purchase. For single-use mixing vessels and other accessories, LT Laborhandel’s procurement service will put together a package tailored to sample volumes and applications, for example with the UTTD control Pharma Solution or the UTTD control Life Science Solution as pre-configured alternatives. For regulated environments, qualification documents (IQ/OQ) and factory calibration certificates are also available as separate accessories.
IKA T 18 Brushless Digital Solution Disperser Set, 1 to 1,500 ml, 3,000 to 25,000 rpm, 0010015148
Anyone introducing the T 18 series for the first time who does not yet have a suitable dispersing tool or stand in stock will waste time placing a separate order from the range of accessories. The T 18 brushless digital Solution combines the T 18 brushless digital drive unit with the tool, shaft and stand to form a starter set that is ready for immediate use.What’s included in the setIn addition to the drive unit, the set includes the S 18 N - 19 G dispersing tool (ID No. 000L004640), a reusable stainless steel tool with a diameter of 19 millimetres. For stationary operation, the set also includes an R 1826 plate stand (ID No. 0003160100) and an R 182 cross sleeve (ID No. 0002657700), so that the drive unit can be attached directly to the stand without having to order these parts separately.Brushless drive as in the standalone unitThe drive unit is technically identical to the separately available T 18 brushless digital (ID No. 0020102476): 400 watts input power and 300 watts output power, a brushless DC motor and a continuously adjustable speed between 3,000 and 25,000 revolutions per minute. The processable volume ranges from 0.001 to 1.5 litres at a maximum viscosity of 5,000 mPas; both are indicated via LEDs. Without a tool attached, the noise level is 70 dB(A); the extension arm measures 13 millimetres in diameter and 160 millimetres in length.For higher hygiene and compliance requirementsThe brushless motor operates without carbon brushes, which reduces wear and tear and facilitates hygienic cleaning between batches. A timer with LED display supports reproducible process steps, whilst a quick-release coupling allows tool changes to be carried out without the need for tools. A micro-USB interface connects the set to a computer for remote control and experiment documentation using labworldsoft.Accessories beyond the setIf the supplied S 18 N - 19 G is not sufficient for individual samples, further dispersing tools from the S-18 series are available, such as the smaller S 18 N - 10 G or disposable plastic tools like the S 18 D - 10 G - KS and S 18 D - 14 G - KS for switching between samples without the need for cleaning. For regulated environments, IKA also offers factory calibration certificates and IQ/OQ documentation for instrument and process qualification, which can be compiled on request via the procurement service.Typical applicationsEntry-level model in the T-18 series without the need to select separate accessoriesEmulsifying, homogenising and dispersing larger sample volumes of up to 1.5 litresStationary operation on a stand for longer, unattended runs with a timerIndustries with high hygiene and compliance requirements, thanks to the hygienic, brushless designTest series requiring documentation, with qualification certificatesSelection guide: Set, standalone unit or more compact model?Those who already own their own dispersing tools and a stand will save money by opting for the T 18 brushless digital drive unit alone rather than this set. For smaller volumes and lower viscosities, the more compact T 18 mini digital ULTRA-TURRAX is often sufficient. Those working with larger batches of up to 2 litres from the outset will find the T 25 digital ULTRA-TURRAX in the T-25 series to be the suitable larger drive unit.Technical detailsMotor power input / output400 W / 300 WProcessable volume (H₂O)0.001 to 1.5 lMax. viscosity5,000 mPasSpeed range3,000 to 25,000 rpm, infinitely variable (deviation 2 per cent)Speed displayLEDMotor typebrushless, direct currentNoise level without tools70 dB(A)Boom diameter / boom length13 mm / 160 mmProtection classIP 30 in accordance with DIN EN 60529USB interfaceMicro-USBPower rating220 to 240 V, 50/60 Hz, 400 W (100 to 120 V version available)Dimensions (W x H x D) of the drive unit89 x 270 x 161 mmWeight of drive unit3 kgSupplied dispersing toolS 18 N - 19 G, reusable, stainless steel, 19 mmContentsT 18 brushless digital ULTRA-TURRAX drive unit (ID no. 0020102476)S 18 N - 19 G mixing tool, reusable, stainless steel, 19 mm (ID No. 000L004640)R 1826 plate stand (ID No. 0003160100)R 182 cross-sleeve (ID No. 0002657700)Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and Procurement ServiceThe IKA manufacturer’s warranty applies to the T 18 brushless digital Solution: 2 years, extended to 3 years if registered at ika.com/register within 90 days of purchase. For additional tools in other diameters or further accessories, the procurement service provided by LT Laborhandel will organise the assembly.
IKA T 25 easy clean control ULTRA-TURRAX disperser, 3,000 to 25,000 rpm, with temperature measurement, 0025002500
The T 25 easy clean control ULTRA-TURRAX uses an RFID-enabled tool to measure the sample temperature, thereby protecting heat-sensitive formulations from overheating. A dispersing tool is not supplied with the drive unit; it is selected from the relevant tool range to suit the temperature measurement function.Temperature measurement and tool recognition via RFIDUsing a tool fitted with a temperature sensor, the unit measures the sample temperature within a range of 0 to 125 degrees Celsius, with a resolution of 0.1 Kelvin and an accuracy of ±1 Kelvin. Continuous temperature monitoring with an adjustable limit protects against overheating, whilst the tool simultaneously records its operating hours via RFID, which simplifies maintenance planning. In addition to the standard tool, the range of accessories includes further variants with temperature sensors in diameters of 18 and 25 millimetres, as well as a flat version.Easy-clean maintenance without dismantlingAs with the digital version, the tool on the control model can be opened for cleaning without dismantling the entire rotor-stator unit. The brushless DC motor runs at 70 dB(A) without a tool fitted, making it comparatively quiet and free from carbon dust. All dispersing tools in the S-25 series are compatible with this drive unit; even classic tools without temperature sensors can be used with it for tasks where temperature measurement is not a factor.Operation, remote control and connectionThe speed is continuously adjustable between 3,000 and 25,000 revolutions per minute via an LED display, whilst a timer manages recurring process times. In addition to operation via the unit itself, the T 25 easy clean control can be controlled using the optional WiCo remote control, which is not included in the scope of delivery. A micro-USB interface connects the unit to labworldsoft; it operates on a mains supply of 220 to 240 volts, or 100 to 120 volts on request for locations outside Europe. The housing is protected to IP 30 in accordance with DIN EN 60529 and is designed for a 100 per cent duty cycle at a permissible ambient temperature of 5 to 40 degrees Celsius.Documentation and ConformityAs with the digital version, a separate EU Declaration of Conformity is available for download for this drive unit, along with a dedicated data sheet. The operating instructions are shared with the digital version and are available in 14 languages.Typical applicationsThe temperature monitoring feature makes the unit particularly suitable for applications where samples may be damaged by excessive heating.Dispersion of heat-sensitive pharmaceutical and cosmetic formulationsProcesses requiring documented maintenance via RFID operating hours recordingHomogenisation where a fixed temperature limit must be maintainedRemote control via WiCo for applications in fume cupboardsSelection guide: control, digital or Set?If temperature measurement is not required, the more affordable T 25 easy clean digital ULTRA-TURRAX is usually sufficient. Those who do not yet own a temperature-measuring tool will find the T 25 easy clean control Solution to be the ideal complete set, comprising the tool, stand and cross-joint. For more compact, networked applications with Wi-Fi and Ethernet, the standalone T 25 mini control Solution is available; it covers smaller volumes at lower power. For higher volumes with a more powerful drive, but without temperature measurement, the T 25 digital ULTRA-TURRAX is suitable.Technical detailsThe following table summarises the key specifications for the drive, temperature measurement and connections, as specified by IKA for the ‘control’ variant of the T 25 easy clean series.Motor power input / output500 W / 400 WProcessable volume (H₂O)1 to 2,000 mlMax. viscosity5,000 mPasSpeed range3,000 to 25,000 rpm, continuously variable (2% deviation)Speed displayLEDMotor typebrushless, direct currentNoise level without tools70 dB(A)Boom diameter / boom length13 mm / 160 mmTimerYes, LED displayPermissible duty cycle100 %Permissible ambient temperature / humidity5 to 40 °C / 80 %Protection classIP 30 in accordance with DIN EN 60529USB interfaceMicro-USBPower rating220 to 240 V, 50/60 Hz, 500 W (alternative voltage option: 100 to 120 V)Temperature measurement range0 to 125 °CTemperature measurement resolution0.1 KTemperature measurement accuracy±1 KDimensions (W x H x D)89 x 270 x 161 mmWeight3 kgContentsT 25 easy clean control ULTRA-TURRAX drive unitUSB cable, USB A to Micro-B, 2 mA dispersing tool and the WiCo remote control are not included in the scope of delivery and must be ordered separately if required.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe IKA manufacturer’s warranty applies to the T 25 easy clean control ULTRA-TURRAX: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For dispersing tools with temperature sensors, stands or the WiCo remote control, the procurement service provided by LT Laborhandel will handle the assembly.
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
If a process in a beaker reaches its limits because 2 litres suddenly need to become 20, a drive with more power and a longer arm is required – but without having to switch to a completely different system. The T 50 digital ULTRA-TURRAX covers precisely this transition, from 0.25 to 30 litres (H₂O), with a speed range of 600 to 10,000 revolutions per minute. As with the smaller model, this is a drive unit only, without a dispersing tool.Constant speed even with varying viscosityThe electronic speed control maintains the set value even if the viscosity changes during the batch, with a maximum permissible viscosity of 5,000 mPas. A soft start reduces the start-up load, whilst electronic overload protection and an error code display ensure reliable operation. Without an attachment fitted, the noise level is 72 dB(A); the speed itself is displayed via an LED and can be adjusted continuously.Powerful drive for larger volumesWith a power input of 1,100 watts and an output of 700 watts, the T 50 digital significantly outperforms the smaller T 25 digital; the extension arm measures 16 millimetres in diameter and 220 millimetres in length. Measuring 115 x 355 x 139 millimetres and weighing 5.85 kilograms, the machine can still be guided by hand. It operates on 220 to 240 volts at 50 or 60 hertz; a voltage variant of 100 to 120 volts is also available. It has an IP 20 protection rating in accordance with DIN EN 60529, and is suitable for ambient temperatures of 5 to 40 degrees Celsius with up to 80 per cent relative humidity.Tool change using the supplied wrenchesA socket wrench for changing the shaft and another for changing the dispersing tool are supplied with the drive unit; the dispersing tool itself is not included and must be selected to suit the application. The range includes, amongst others, the stainless steel tools S 50 N – G 45 G (Ident 0008003000) and S 50 N - G 45 F (ID 0008003900); the R 1405 propeller (ID 0001289800) for axial flow; and the R 1402 dissolver (ID 0001243300) for radial flow. The S 50 N – W 80 SMK jet mixing head (ID 0008006300) is also suitable for dispersion tasks requiring high shear. For stationary operation, the H-stand R 2722 (ID 0001412000) with cross-sleeve R 271 (ID 0002664000) is available.Typical applicationsScale-up of laboratory formulations to pilot plant volumesHomogenisation of suspensions and emulsions up to 30 litresPilot trials prior to scaling up to production scaleInterchangeable rotor-stator assemblies depending on the applicationSelection guide: smaller, larger or as a complete setThose working at a laboratory scale of up to 2 litres are better served by the more compact T 25 digital ULTRA-TURRAX drive unit or the T 25 digital Solution complete set; for even smaller batches, the T 18 brushless digital is suitable. If requirements exceed 30 litres, or if a three-phase connection is available anyway, the T 65 digital ULTRA-TURRAX can handle volumes of up to 50 litres.Technical detailsMotor power input / output1,100 W / 700 WProcessable volume (H₂O)0.25 to 30 lMax. viscosity5,000 mPasSpeed range600 to 10,000 rpm, continuously variable (1 per cent deviation)Speed displayLEDNoise level (without tools)72 dB(A)Boom diameter / boom length16 mm / 220 mmProcess typebatchPermissible duty cycle100 %Permissible ambient temperature range / humidity5 to 40 °C / 80 % (up to 31 °C), decreasing linearly to 50 % at 40 °CProtection classIP 20 in accordance with DIN EN 60529Rated power220 to 240 V, 50/60 Hz, 1,100 W (additional voltage variant 100 to 120 V available)Dimensions (W x H x D)115 x 355 x 139 mmWeight5.85 kgContentsT 50 digital ULTRA-TURRAX drive unitSocket wrench for changing the shaftSocket wrench for tool changeA dispersing tool is not included and must be selected separately to suit the specific application.Regulatory informationThis unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and procurement serviceThe IKA manufacturer’s warranty applies to the T 50 digital: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service assembles dispersing tools, stirring elements and stands to suit the existing drive; on request, it also provides factory calibration certificates and qualification documents for regulated areas.
IKA T 25 mini control ULTRA-TURRAX disperser, 1 to 1,500 ml, 600 to 25,000 rpm, with temperature measurement, 0025006650
Some samples are sensitive to the heat generated by the motor during dispersion. The T 25 mini control ULTRA-TURRAX measures the sample temperature in real time via specialised dispersion tools and can also be integrated into a laboratory environment via Wi-Fi, Ethernet or RS232; it features a compact design in the same form factor as the T 18 mini digital.Temperature monitoring protects heat-sensitive samplesUsing suitable dispersing tools, the instrument measures the sample temperature within a range of 0 to 125 degrees Celsius, with a resolution of 0.1 Kelvin and a measurement accuracy of ±1 Kelvin. A safety temperature limit can be set to protect heat-sensitive samples from degradation – useful, for example, with protein solutions or other temperature-critical preparations.Networking via Wi-Fi, Ethernet and RS232In addition to the USB-C interface, the T 25 mini control also connects to higher-level laboratory systems via WPAN, Wi-Fi, Ethernet or RS232, enabling remote control and parameter documentation using labworldsoft. The speed range extends from 600 to 25,000 revolutions per minute, with a deviation of ±3 per cent above 3,000 rpm and a maximum deviation of ±100 rpm below this. The processable volume ranges from 0.001 to 1.5 litres (H₂O), with a maximum viscosity of 2,000 mPas.Compact design, brushless motorMeasuring 66 x 186 x 100 millimetres and weighing 1.8 kilograms, the unit takes up little space on the fume cupboard. The brushless DC motor draws 210 watts and delivers 160 watts, with a noise level of 75 dB(A) when no tool is fitted. Speed, timer and temperature are shown on a digital display.Tools with temperature sensor and remote controlThe patented temperature sensor function works with the S-25-EC series dispersing tools featuring an integrated sensor, such as the S 25 EC - T - C - 18 G; all S-25 tools up to 18 millimetres in size are compatible with the drive. For operation without direct access to the unit, the IKA HUB and HUB-DS remote controls are also available; both can be ordered alongside the drive via LT Laborhandel’s procurement service.Compatible dispersing toolsFrom simple stirring shafts to the high-speed dissolver shaft S 25 KV - 2802, the S-25 range covers a wide spectrum of tasks; all variants up to 18 millimetres in size are compatible with the T 25 mini control. The S 18/25-ET50 disposable tube is also available for cleaning between samples; for stationary operation, a plate stand from the R-1825 series with a suitable cross-sleeve is recommended.Typical applicationsDispersion of temperature-sensitive samples with real-time temperature monitoringAutomated processes with connection to laboratory software via Wi-Fi, Ethernet or RS232Compact workstations with limited floor space in a fume cupboardExperimental series requiring documentation in regulated areasSelection guide: with or without temperature measurement and networking?If you do not require temperature monitoring or a network connection, the T 18 mini digital ULTRA-TURRAX – which is identical in design but more compact – offers better value for money. For larger volumes of up to 2 litres and higher motor power without temperature measurement, the T 25 digital ULTRA-TURRAX is suitable. If you want to get started straight away with the tool and stand, the T 25 mini control Solution is the right set for you.Technical detailsMotor power input / output210 W / 160 WProcessable volume (H₂O)0.001 to 1.5 lMax. viscosity2,000 mPasSpeed range600 to 25,000 rpmSpeed deviation±3 % (above 3,000 rpm), ≤±100 rpm (below 3,000 rpm)Speed displayDigital displayMotor typebrushless, direct currentNoise level without tools75 dB(A)Temperature measurement range0 to 125 °CTemperature measurement resolution0.1 KTemperature measurement accuracy±1 KProbe diameter / probe length13 mm / 160 mmInterfacesUSB-C, RS232, WPAN, Wi-Fi, EthernetProtection classIP 30 in accordance with DIN EN 60529Power ratings100 to 240 V, 50/60 Hz, 210 W (max. 250 W, standby 3 W), 48 V DC / 4,500 mADimensions (W x H x D)66 x 186 x 100 mmWeight1.8 kgContentsT 25 mini control ULTRA-TURRAX drive unitAccording to the manufacturer, a dispersing tool is expressly not included in the scope of delivery and must be selected separately, for example the S-25-EC tool with temperature measurement.Regulatory informationThe unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and Procurement ServiceThe IKA manufacturer’s warranty applies to the T 25 mini control: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service can put together suitable dispersing tools, stands and the IKA HUB remote control as required.
IKA BMT-20-S-IVD.50 Sample Tube, Membrane Lid, 50 pcs., for UTTD control, 0020027186
For the IKA UTTD control Tissue Solution disperser (MPN 0010013008), BMT-20-S-IVD single-use sample tubes are the refill consumable. Each tube contains stainless steel beads of 5 mm diameter that mechanically disrupt the sample material in the Tube Drive, a ball-mill working principle rather than rotor-stator dispersion. As a single-use, IVD-labelled article there is no cleaning between samples, which rules out cross-contamination between batches.The two versions differ in their sterile packaging: the BMT-20-S-IVD.50 version has a membrane lid and is exactly the tube variant included in the delivery scope of the UTTD control Tissue Solution. The BMT-20-S-IVD1.50 version is recommended by IKA itself as a more affordable alternative for the same drive and is single sterile packaged, without a membrane lid.CompatibilityRefill consumable for the IKA UTTD control Tissue Solution disperser (MPN 0010013008). Both versions are intended for the same Tube Drive unit.Technical detailsVolume20 mlWorking range (BMT-20-S-IVD.50)5 to 15 mlFunctional elementStainless steel beads, 5 mmBMT-20-S-IVD.50Sterile, membrane lid, incl. 5 ml 0.90% NaCl solution, IVD labelBMT-20-S-IVD1.50Sterile, single sterile packaging without membrane lid, IVD labelMax. processing time1 minute with automated procedure (longer times must be validated by the customer)Contents of the package1 x pack of 50 BMT-20-S-IVD single-use sample tubes in the selected version.Individual requirements & procurement serviceFor ongoing routine restocking, our procurement service helps estimate consumption and choose between the membrane lid and single-packaging versions.
Content: 50 piece(s) (€16.36 / 1 piece(s))
IKA WiCo T 25 easy clean, wireless controller, remote control, 0025006310
Maximum safety from a distance: IKA WiCo T 25 easy clean The IKA WiCo T 25 easy clean (MPN 0025006310) is the detachable core component of the IKA T 25 easy clean control disperser. This compact wireless controller (WiCo) allows you to control and monitor your disperser completely wirelessly via a secure Bluetooth connection. It is ideal as a spare part or as a second control unit for your existing system. Working under a fume cupboard The greatest advantage of WiCo technology is the significant improvement in safety when handling hazardous, toxic or extremely odourous samples. Remote control: You can position the T 25 drive deep inside the fume cupboard or in a glovebox and close the fume cupboard completely. Full control: With the WiCo in your hand, you can control the speed conveniently and safely from outside. This protects you from hazardous aerosols and loud operating noises. Intuitive display for all parameters The Wireless Controller’s easy-to-read TFT display ensures you always have a clear view of all critical process parameters for your sample preparation: Rotational speed: Stepless adjustment and monitoring of the actual and target rotational speeds. Temperature: (Provided a temperature sensor is connected to the drive) Monitor temperature-sensitive samples in real time. Timer/Counter: Precise control of the dispersion time for highly reproducible results. Trend display: Detect changes in viscosity during the dispersion process. Easy handling The WiCo can be removed from the drive motor in a single simple step. The controller’s battery is automatically recharged via the integrated docking station on the T 25 easy clean control as soon as it is docked. Technical data Model: WiCo T 25 easy clean Device type: Wireless controller / remote control Compatibility: For use exclusively with the IKA T 25 easy clean control dispersing drive (Note: Not compatible with the ‘digital’ version!) Connection: Bluetooth Display: TFT, colour Display parameters: Speed, temperature, timer/counter, system messages Power supply: Built-in rechargeable battery (charged via the main unit) Weight: approx. 0.2 kg Contents 1 x IKA WiCo T 25 easy clean (wireless controller) (Please note: The T 25 easy clean control dispersing drive is not included!) Customised requirements & accessories Are you looking for the complete dispersion system including the drive, or do you still need the matching stand and the patented easy clean dispersion tools? We’d be happy to put together a bespoke package for you. Please contact our procurement service.