Meditrade Gentle Skin Grip, latex examination gloves, powder-free, 100 pieces – XL, 1221GRIP-XL

Wet instruments, oily tools or slippery packaging put many disposable gloves to the test: as soon as the surface becomes damp or greasy, the grip decreases noticeably. According to the manufacturer, Meditrade Gentle Skin Grip latex examination gloves are the most grippy latex gloves in the Meditrade range. An acrylic polymer coating on a textured surface provides extra grip where smooth gloves reach their limits. Available in sizes XS to XL, each in packs of 100.

Acrylic polymer coating for extra grip

In addition to the ingredients typically found in latex gloves, natural rubber latex, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide and antioxidants, the Grip range also features an acrylic polymer coating on the textured surface. This coating is the key difference compared to traditional latex gloves without any special grip optimisation and, according to the manufacturer, improves grip, particularly when handling damp, oily or powdery surfaces. The glove is free from mercaptobenzothiazole and thiurams.

Thickness from the cuff to the fingertips

According to the manufacturer’s data sheet, the thickness at the cuff is at least 0.08 mm, at the palm at least 0.11 mm and at the fingertips at least 0.12 mm, ensuring that the greatest material thickness is available at the point subject to the most stress. The tear strength is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5 for the absence of holes in the batch. The rolled hem also makes it easier to put on and take off the gloves, even when the hands themselves are already damp.

Class I medical device and PPE Category III

The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves, as well as EN 374-1, -2, -4 and -5 for protection against microorganisms, supplemented by EN 16523-1 for chemical permeation and EN 420:2003+A1:2009 as the general standard for protective gloves. It is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment under Regulation (EU) 2016/425, and is manufactured under a quality management system certified to EN ISO 13485:2016.

Why smooth gloves reach their limits in wet conditions

A purely textured glove without an additional coating loses some of its grip when it comes into contact with water, oil or cleaning agents, because a thin film of liquid forms between the glove and the workpiece. This is precisely where the acrylic polymer coating of the Gentle Skin Grip comes into its own: According to the manufacturer, it increases friction even in damp conditions without compromising the elasticity of the natural latex. For standard dry tasks without any particular risk of slipping, however, a simpler latex glove from our range is often sufficient.

Selection guide: choosing the right size

As with the other Gentle Skin gloves, the size range from XS to XL is based on the width of the hand, measured at the widest point excluding the thumb.

Distinction within the Gentle-Skin latex range

Within the Meditrade latex range available from us, the Grip differs from the other two variants primarily due to its coating. Those who, on the other hand, require a particularly fine sense of touch for pipetting and laboratory work are better served by the low-protein Meditrade Gentle Skin Sensitive, which has a slightly thinner wall thickness of 0.13 mm at the fingertip. For general routine use without any specific grip or protein requirements, the Meditrade Gentle Skin compact+ is available, with a comparable basic wall thickness. All three are certified to EN 455 and EN 374 and are classified as a Class I medical device and PPE Category III. Those wishing to avoid natural latex entirely will find latex-free alternatives in our range of nitrile gloves, although these do not feature the grip coating described here.

Use, storage, shelf life and disposal

According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use only. As the gloves are made from natural rubber latex, the manufacturer expressly warns of the risk of allergic or even anaphylactic reactions. After use, the gloves are disposed of as operational waste or via the internal hazardous waste disposal system, depending on the level of contamination.

Typical applications

The non-slip coating makes the Gentle Skin Grip ideal for use wherever moisture or grease would otherwise make a firm grip difficult:

• Cleaning and processing of laboratory glassware and instruments, often in contact with water or cleaning agents
• Handling oily or greasy components in workshops and industry
• Packaging and order-picking tasks involving frequent changes of material
• Examination and care tasks where a secure grip on damp surfaces is required

For example, when rinsing and sorting laboratory glassware under running water, the grip is maintained, whereas an uncoated glove would slip more easily in the same situation. The difference compared to a smooth glove surface is also clearly evident when handling greasy seals or lubricants in the workshop.

Assessing your requirements correctly: from the pack to the box

Gentle Skin Grip is sold in packs of 100 per size; according to the manufacturer’s data sheet, a box contains 10 packs, i.e. 1,000 gloves. A simple rough calculation can help with demand planning: at a rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. Businesses with multiple workstations or frequent glove usage should ideally stock several packs of the appropriate size to ensure that no workstation runs out of a particular size.

Frequently asked questions about Gentle Skin Grip

What sets the Grip apart from other latex gloves?
The textured surface is additionally coated with an acrylic polymer, which, according to the manufacturer, improves grip on damp or oily surfaces.

Is the glove sterile?
No, according to the data sheet, it is a non-sterile, single-use glove.

How thick is the glove?
The thickness is at least 0.08 mm on the cuff, 0.11 mm on the palm and 0.12 mm at the fingertips.

Is the Grip suitable for people with a latex allergy?
No, the glove is made of natural rubber latex and, according to the manufacturer, may trigger allergic or even anaphylactic reactions.

What is the shelf life of the glove?
According to the data sheet, 3 or 5 years when stored in a cool, dry place, protected from direct sunlight.

Is the Grip coating also available on a latex-free glove?
For this data sheet, the coating is only documented for the latex version. For a latex-free alternative offering comparable grip performance, our procurement service will be happy to assist you with your selection.

What sizes are available?
XS, S, M, L and XL, each with its own width specification as per the data sheet, ranging from under 80 mm to over 110 mm.

Can I order individual gloves instead of the whole pack?
No, the product is sold exclusively in packs of 100 per size.

Technical details

Scope of delivery

• 1 pack = 100 Meditrade Gentle Skin Grip latex examination gloves (size as per variant selection)

Individual requirements and procurement service

Do you require a different size, a latex-free alternative with similar grip, or larger purchase quantities for your business? Our procurement service will be happy to assist you in making the right choice.