Skip to main content Skip to search Skip to main navigation

Memmert IN260 incubator, 256 l, +20 to +80 °C, SingleDISPLAY

Product information "Memmert IN260 incubator, 256 l, +20 to +80 °C, SingleDISPLAY"

The IN260 offers an internal capacity of 256 litres and a maximum of nine shelves, more than any smaller model in the IN series featuring SingleDISPLAY. Weighing around 110 kilograms net, the unit is installed with a clearance from the wall, just like the smaller models; it comes as standard without castors, though a castor frame can be ordered as a factory option. Temperature control is via a ControlCOCKPIT SingleDISPLAY, with a range from +20 to +80 °C.

Installation and positioning

Memmert specifies a minimum clearance of 15 centimetres from the wall, a minimum of 20 centimetres from the ceiling and a minimum of 5 centimetres at the sides. Natural convection mixes in preheated fresh air via an electronically adjustable exhaust air flap; the exhaust air outlet with throttle valve can be controlled electronically. The interior is reinforced by deep-drawn ribbing and features a protected, integrated 4-sided all-round heating system. Those requiring forced air circulation instead of natural convection will find the same size model in the IF series.

Control and calibration

The ControlCOCKPIT SingleDISPLAY with a TFT colour graphic display evaluates data from a DIN Class A Pt100 sensor in a 4-wire measurement; the setting accuracy is 0.1 °C. Three freely selectable temperature values can be calibrated, whilst a self-diagnostic system assists with troubleshooting. The programme sequence is saved in the event of a power cut, and the data logger can be read out via Ethernet.

Safety technology according to DIN 12880

A mechanical temperature limiter, protection class 1 according to DIN 12880, switches off the heating when the temperature rises to approximately 20 °C above the maximum cabinet temperature. Behind the fully insulated stainless steel door with a 2-point locking mechanism lies an inner glass door; an adjustable electronic temperature monitoring system complements the safety features. The permissible ambient temperature is between +5 °C and +40 °C at a maximum relative humidity of 80 %.

Selection guide for the right size

With nine shelves, the IN260 offers the most shelf spaces of all models below the large mobile units, making it suitable for users who find the 161-litre IN160 too small. If more floor space is available, the table below lists the mobile IN450 with a capacity of 449 litres; however, it has only eight shelves instead of nine.

Typical applications

With a capacity of 256 litres, the IN260 is suitable for incubating and temperature-controlling larger sample batches in the range from +20 to +80 °C, including in research applications.

  • Incubation and temperature control across up to nine shelves
  • Use in medicine, pharmacy, food analysis and food chemistry
  • Use in research

Technical details

Setting temperature range+20 to +80 °C
Working temperature rangeAt least 5 °C above room temperature up to +80 °C
Temperature setting accuracy0.1 °C
Temperature sensor1 Pt100 DIN Class A in 4-wire configuration
Internal volume256 l
Internal dimensions (W x H x D)640 x 800 x 500 mm
External dimensions of housing (W x H x D)824 x 1183 x 684 mm (depth plus 56 mm for door handle)
Net weightapprox. 110 kg
Connection 230 V50/60 Hz, approx. 1,700 W
Connection 115 V50/60 Hz, approx. 900 W
Maximum number of shelves9
Shelves included in the scope of delivery2
InteriorEasy to clean, reinforced with deep-drawn ribbing, with protected, integrated 4-sided all-round heating
ControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphic display
Permissible ambient temperature+5 °C to +40 °C
Permissible relative humiditymax. 80 %, non-condensing
Maximum installation altitudemax. 2,000 m above sea level
MarkingsCE, VDE GS, UL, EAC

Other sizes in the series

The IN series with SingleDISPLAY ranges from 32 to 749 litres internal volume, sorted by internal volume:

ModelInternal volumeSetting temperatureDisplay
IN3032 l+20 to +80 °CSingleDISPLAY
IN5553 l+20 to +80 °CSingleDISPLAY
IN7574 l+20 to +80 °CSingleDISPLAY
IN110108 l+20 to +80 °CSingleDISPLAY
IN160161 l+20 to +80 °CSingleDISPLAY
IN260 (this page)256 l+20 to +80 °CSingleDISPLAY
IN450449 l+20 to +80 °CSingleDISPLAY
IN750749 l+20 to +80 °CSingleDISPLAY

The same capacity is also available with TwinDISPLAY and two Pt100 sensors in the IN-plus series: IN260plus.

Scope of delivery

  • 1x Memmert IN260 incubator
  • Factory calibration certificate (calibrated at +37 °C)
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • Inner glass door
  • 2x stainless steel grid shelves, electropolished

Regulatory information

This appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on the return of old appliances can be found on our Environment and Disposal page.

Individual requirements and procurement service

For the IN260, the following items, amongst others, can be ordered ex-works: interior lighting, an interior socket, a left-hand door hinge and a 4-20 mA interface. Available accessories include reinforced grid shelves with a load capacity of up to 60 kilograms, a wall bracket and an Ethernet cable; we also arrange calibration and IQ/OQ services for qualification and requalification. We are happy to advise you on your specific requirements.

Volume: 256 l