Skip to main content Skip to search Skip to main navigation

Memmert IN260plus incubator, 256 l, +20 to +80 °C, TwinDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert IN260plus incubator, 256 l, +20 to +80 °C, TwinDISPLAY"

The IN260plus offers an internal capacity of 256 litres and a maximum of nine shelves, more than any smaller model in the IN-plus range featuring TwinDISPLAY. Weighing around 110 kilograms net, the unit is installed with a clearance from the wall, just like the smaller models; it comes as standard without castors, though a castor frame can be ordered as a factory option. Control is via a ControlCOCKPIT TwinDISPLAY with two Pt100 sensors in the range +20 to +80 °C.

Design for larger batches

Natural convection mixes in preheated fresh air via an electronically adjustable exhaust air flap; the exhaust air outlet with throttle valve is electronically controllable. The interior is reinforced with deep-drawn ribbing and features a protected, integrated 4-sided all-round heating system. Those requiring forced air circulation instead of natural convection will find the same size model in the IF-plus series.

ControlCOCKPIT TwinDISPLAY

The ControlCOCKPIT TwinDISPLAY, featuring two TFT colour graphic displays, evaluates data from two DIN Class A Pt100 sensors in a 4-wire measurement configuration, which monitor each other; the setting accuracy is 0.1 °C. HeatBALANCE distributes the heating power between the upper and lower heating groups within a range of -50 to +50 %; programmes are transferred via Ethernet and USB using the AtmoCONTROL software.

Multi-stage temperature monitoring

The display allows selection between an adjustable temperature monitor of protection class 3.1 or an adjustable temperature limiter of protection class 2, AutoSAFETY supplements these levels with over- and under-temperature monitoring, which tracks the setpoint at a freely selectable interval and issues both visual and audible warnings. At the lowest level, a mechanical temperature limiter of protection class 1 according to DIN 12880 switches off the heating at approximately 20 °C above the maximum cabinet temperature. The permanently installed programme performs internal sterilisation over 4 hours at 160 °C; the contents of the cabinet are not sterilised during this process.

Selection guide for the right size

With nine shelves, the IN260plus offers the most shelf spaces of all models below the large mobile units, making it suitable for users for whom the IN160plus, with its 161-litre capacity, has become too small. If even larger batches are required, the table below lists the mobile IN450plus with a capacity of 449 litres; however, it has only eight shelves instead of nine.

Typical applications

The IN260plus incubates and temperature-controls larger sample series between +20 and +80 °C, including in research applications.

  • Incubating and temperature-controlling sample series across up to nine shelves
  • Sterilise the interior using the permanently installed programme
  • Use in research

Technical details

Setting temperature range+20 to +80 °C
Working temperature rangeAt least 5 °C above room temperature up to +80 °C
Temperature setting accuracy0.1 °C
Temperature sensor2 Pt100 sensors, DIN Class A, in a 4-wire configuration for mutual monitoring and automatic failover in the event of a fault
HeatBALANCE functionAdjustment of the heating power distribution between the upper and lower heating groups from -50 % to +50 %
Adjustable temperature monitor/limiterAdjustable temperature monitor (TWW), protection class 3.1, or adjustable temperature limiter (TWB), protection class 2, selectable via the display
AutoSAFETYadditionally integrated over- and under-temperature monitoring ‘ASF’, automatically tracks the setpoint at a freely selectable interval, alarm if temperature exceeds or falls below the setpoint, heating shut-off if exceeded
Sterilisation programmePermanently installed sterilisation programme (4 hours/160 °C) for sterilising the interior; not intended for sterilising the load
Internal volume256 l
Internal dimensions (W x H x D)640 x 800 x 500 mm
External dimensions of the housing (W x H x D)824 x 1183 x 684 mm (depth plus 56 mm for door handle)
Net weightapprox. 110 kg
Connection 230 V50/60 Hz, approx. 1,700 W
Connection 115 V50/60 Hz, approx. 900 W
Maximum number of shelves9
Shelves included in the scope of delivery2
InteriorEasy to clean, reinforced with deep-drawn ribbing, with protected, integrated 4-sided all-round heating
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic displays
Permissible ambient temperature+5 °C to +40 °C
Permissible relative humiditymax. 80 % non-condensing
Maximum installation altitudemax. 2,000 m above sea level
MarkingsCE, VDE GS, UL, EAC

Other sizes in the series

The IN-plus series with TwinDISPLAY ranges from 32 to 749 litres internal volume, sorted by internal volume:

ModelInternal volumeSetting temperatureDisplay
IN30plus32 l+20 to +80 °CTwinDISPLAY
IN55plus53 l+20 to +80 °CTwinDISPLAY
IN75plus74 l+20 to +80 °CTwinDISPLAY
IN110plus108 l+20 to +80 °CTwinDISPLAY
IN160plus161 l+20 to +80 °CTwinDISPLAY
IN260plus (this page)256 l+20 to +80 °CTwinDISPLAY
IN450plus449 l+20 to +80 °CTwinDISPLAY
IN750plus749 l+20 to +80 °CTwinDISPLAY

The same capacity is also available with SingleDISPLAY and a Pt100 sensor in the IN series: IN260.

Scope of delivery

  • 1x Memmert IN260plus incubator
  • Factory calibration certificate (calibrated at +37 °C)
  • Fully insulated stainless steel door with 2-point locking mechanism (compression door lock)
  • Inner glass door
  • 2x stainless steel grid shelves, electropolished

Regulatory information

This appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on the return of old appliances can be found on our Environment and Disposal page.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29738) or without air slots (B29739). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

The IN260plus can be ordered ex-works with, amongst other things, interior lighting and a socket, a left-hand door hinge and a 4-20 mA interface. We also offer a USB user ID stick, reinforced grid shelves up to 60 kilograms, a wall bracket and an Ethernet cable. For qualification and requalification, we arrange calibration and IQ/OQ services. Please do not hesitate to contact us if you have any specific requirements.

Certification marks: GS (VDE)
Volume: 256 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E28891 for sizes 260 and 410
Manufacturer number: E28891

The E28891 stainless steel grid is an electropolished shelf for 26 Memmert models in sizes 260 and 410. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UN260 or IF260.All 26 models have 2 grids as standard. The maximum number is 9 grids (size 260) and 14 grids (size 410). According to Memmert, the load per shelf is 20 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying several sample series in parallel in routine operation, for example in the UF260Incubating extensive sample series in research and medicine, for example in the IF260Parallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoMicrobiological examinations and microbial count determination in the routine laboratory, for example in the IPP410ecoSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UN260plus2920256UN2602920256IF260plus2920256IN260plus2920256IF2602920256IN2602920256UF2602920256UF260plus2920256IF260bw2920256IPP260eco2920256IPP260ecoPlus2920256IPP410eco21420384IPP410ecoplus21420384HPP260eco2920256HPP410eco21420384ICH2602920256ICP2602920256IN260m2920256IN260mplus2920256IF260m2920256IF260mplus2920256UN260m2920256UN260mplus2920256UF260m2920256UF260mplus2920256UF260TS2920256The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel grid, electropolished (E28891)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €126.42
memmert rohrverlaengerung gerade
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29718

The straight slip-on pipe extension B29718 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The angled version is also available (B29719). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 straight slip-on pipe extensionIndividual requirements & procurement serviceFor the angled version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €41.28
memmert rohrverlaengerung gewinkelt
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29719

The angled slip-on pipe extension B29719 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The straight version is also available (B29718). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material samples in series, for example in the UN260Testing and curing of larger components in quality assurance, for example in the UF750Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 angled slip-on pipe extensionIndividual requirements & procurement serviceFor the straight version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €108.36
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768

The B29768 set of levelling feet contains 4 pieces. With levelling feet, the unit can be aligned horizontally.The set is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. The table of compatible models shows which series is available in which size. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorEmbedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenParallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoSuitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574UN160pa160161IF30plus3032IN30plus3032IF303032IN303032IF160160161IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UN55pa5553UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032IPP260eco260256IPP260ecoPlus260256HPP110eco110108HPP260eco260256IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF160TS160161UF260TS260256Scope of delivery1 set of levelling feet (4 pieces)Individual requirements & procurement serviceFor base frames, further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €46.44
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B29726 for sizes 260 and 410
Manufacturer number: B29726

The stainless steel slide-in drip tray B29726 is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 260 and 410. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 4 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UN260 or IF260.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B29722). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Forcing tests for beer stability, for example in the IPP410ecoShelf-life tests on dairy products, for example in the IPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF260TS260256Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert4 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €164.26
Memmert levelling base frame B33664, height 130 mm, for size 260
Manufacturer number: B33664

The levelling base frame B33664, with a height of 130 mm, is the flat version for Memmert units in the U, Um, I, Im, IPPeco, HPPeco and IFbw series in size 260. It fits 20 models of this size. The size corresponds to the number in the unit name, for example UN260 or IF260.The base frame B29751 with a height of 500 mm is also available for this size.Typical applicationsUnits of size 260 are placed on the base frame. Typical uses of these units:Curing and baking with redundant temperature measurement, for example in the UF260plusIncubating and tempering larger sample series with several shelves at the same time, for example in the IF260plusMaterial tests and quality assurance with high sample throughput, for example in the UN260Cultivation of samples and cultures down to at least 20 °C below room temperature, for example in the IPP260ecoplusSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IF260bw260256IPP260eco260256IPP260ecoPlus260256HPP260eco260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256Technical detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €303.58
memmert boden abtropfschale
Memmert stainless steel base drip tray B29722 for sizes 260 and 410
Manufacturer number: B29722

B29722 is a stainless steel base drip tray with a 15 mm rim for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 260 and 410. It collects dripping liquid. According to Memmert, the maximum load is 4 kg per base drip tray. The size corresponds to the number in the unit name, for example UN260 or IF260.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B29726). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Forcing tests for beer stability, for example in the IPP410ecoShelf-life tests on dairy products, for example in the IPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF260TS260256Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert4 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €209.84
memmert untergestell nivellierbar
Memmert levelling base frame B29751, height 500 mm, for size 260
Manufacturer number: B29751

The levelling base frame B29751 has a height of 500 mm and is intended for Memmert units in the U, Um, I, Im, IPPeco, HPPeco and IFbw series in size 260. It fits 20 models of size 260. The size corresponds to the number in the unit name, for example UN260 or IF260.A flat base frame with a height of 130 mm is also available (B33664). The image is for illustration only.Typical applicationsUnits of size 260 are placed on the base frame. Typical uses of these units:Drying several sample series in parallel in routine operation, for example in the UF260Incubating extensive sample series in research and medicine, for example in the IF260Parallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoHeat treatment and drying of larger material batches in industry, for example in the UN260Suitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IF260bw260256IPP260eco260256IPP260ecoPlus260256HPP260eco260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256Technical detailsHeight500 mmScope of delivery1 levelling base frame, height 500 mmIndividual requirements & procurement serviceFor the flat version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €389.58
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68510 for sizes 260 and 410
Manufacturer number: B68510

The B68510 stainless steel perforated tray is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 260 and 410. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UN260 or IF260. The image is for illustration only.According to Memmert, the maximum load per shelf for these sizes is 20 kg. In addition, the maximum load per unit limits the loading; it is stated in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying several sample series in parallel in routine operation, for example in the UF260Incubating extensive sample series in research and medicine, for example in the IF260Parallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoMicrobiological examinations and microbial count determination in the routine laboratory, for example in the IPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IF260bw260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF260TS260256Technical detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €206.40
Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert reinforced stainless steel grid E29766 for sizes 260 and 410
Manufacturer number: E29766

The reinforced stainless steel grid E29766 is electropolished and, according to Memmert, can bear up to 60 kg. According to Memmert, the standard grids carry 20 kg per shelf in these sizes. The grid is a shelf level in the interior. It is intended for Memmert units in the U, Um, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 260 and 410. The size corresponds to the number in the unit name, for example UN260 or IF260.Please note the maximum load per unit, as it limits the total load of all shelves. The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsTypical uses in the compatible units:Heat treatment and drying of larger material batches in industry, for example in the UN260Material tests and quality assurance with high sample throughput, for example in the UN260Materials and material testing with higher sample throughput in industry, for example in the HPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmertup to 60 kgScope of delivery1 reinforced stainless steel grid, electropolishedIndividual requirements & procurement serviceFor standard grids, perforated trays and drip trays of the same size, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €347.44