Skip to main content Skip to search Skip to main navigation

Memmert Pass-through oven UF160TS, 161 l, +20 to +250 °C, TwinDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert Pass-through oven UF160TS, 161 l, +20 to +250 °C, TwinDISPLAY"

The Memmert Pass-through oven UF160TS is the most compact model of the TS series and is suitable for airlocks between the grey area and the clean room where floor space is limited. With 161 litres of internal volume and two fully insulated stainless steel doors on opposite sides, load material can be passed directly between the room areas. The setting temperature range extends from +20 to +250 °C, controlled via TwinDISPLAY with two redundant Pt100 sensors.

Design: two doors for one airlock

The pass-through function is provided by two fully insulated stainless steel doors, one on the clean side and one on the unclean side. A door interlock for alternating opening can be ordered from the factory, and it serves as contamination protection for wall installation. The interior measures 560 x 720 x 400 mm and the housing externally 745 x 1,233 x 582 mm plus the door handles. 2 electropolished stainless steel grid shelves are included as standard, up to 8 shelves are possible, with up to 20 kg per shelf and up to 210 kg total permissible load. The net weight is around 120 kg, and packed in the carton (830 x 1,300 x 800 mm) around 146 kg.

Control: TwinDISPLAY with HeatBALANCE and SetpointWAIT

The ControlCOCKPIT controller with TwinDISPLAY is an adaptive PID microprocessor controller with two high-resolution TFT colour graphic displays. The HeatBALANCE function adjusts the heating power distribution between the upper and lower heating group in the range from -50 to +50 %, and SetpointWAIT starts the process time only when the setpoint has actually been reached. An electronically controllable air turbine distributes the heat quietly in the interior in 10 % steps, and an adjustable exhaust air flap admixes preheated fresh air. Programmes can be created, managed and transferred via Ethernet or USB using the AtmoCONTROL software, and the programme sequence remains stored in the event of a power failure. The setting accuracy is 0.1 °C up to a setpoint temperature of 99.9 °C and 0.5 °C from 100 °C, and the display resolution is 0.1 °C.

Safety according to DIN 12880

Two Pt100 sensors of DIN class A in 4-wire measurement monitor each other, and if one fails, the second automatically takes over its function. A mechanical temperature limiter of protection class 1 according to DIN 12880 switches off the heating about 20 °C above the maximum cabinet temperature, and a digitally adjustable temperature monitor of protection class 3.1 can also be used. AutoSAFETY monitors over- and under-temperature and triggers an alarm on deviation, and a self-diagnosis system helps with fault finding. Visual and audible alarms report faults immediately.

Selection guide: when the UF160TS is sufficient

With 161 litres and up to 8 shelves with up to 20 kg each, the UF160TS is suitable for small to medium batches. If the batches regularly become larger, the next larger Memmert pass-through oven UF260TS with 256 litres and up to 9 shelves is the more suitable choice. If no airlock function is needed and a door accessible from one side is sufficient, the likewise 161 litre Memmert universal oven UF160plus with TwinDISPLAY is also an option.

Typical applications

The UF160TS is designed for the direct transport of load material and samples between the grey area and the clean room, and the double door takes on the pass-through and airlock function.

  • Airlock transfer of load material and samples between the grey area and the clean room
  • Reducing the risk of contamination during sample transport through the double door function
  • Time-saving loading when the grey area and the clean room directly adjoin each other
  • Drying and annealing of load material with subsequent transfer into the clean room

Technical details

Setting temperature range+20 to +250 °C
Working temperature rangemin. 10 °C above room temperature to +250 °C
Setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Display resolution, actual value0.1 °C
Temperature sensor2x Pt100, DIN class A, 4-wire measurement, redundant
TimerDigital countdown timer with target time, 1 min to 99 days
Internal volume161 l
Internal dimensions (W x H x D)560 x 720 x 400 mm
External dimensions (W x H x D)745 x 1,233 x 582 mm (plus 2x56 mm door handle)
Net weightapprox. 120 kg
Gross weight (carton)approx. 146 kg
Dimensions incl. carton830 x 1,300 x 800 mm
Connection 230 V50/60 Hz, approx. 3,200 W
Connection 115 V50/60 Hz, approx. 1,800 W
Shelves as standard / maximum2 / 8
Max. load, device210 kg
Max. load per shelf20 kg
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic display
Additional functionsHeatBALANCE, SetpointWAIT, AutoSAFETY
Permissible ambient temperature+5 °C to +40 °C
Permissible humiditymax. 80 % rel., non-condensing
Maximum installation altitude2,000 m above sea level
Electrical categoryOvervoltage category II, pollution degree 2
MarkingsCE, EAC

Other sizes in the series

The UF160TS is the smallest model of the TS series, whose five sizes with TwinDISPLAY and airlock function range from 161 to 1,248 litres.

ModelInternal volumeSetting temperatureDisplay
UF160TS (this page)161 l+20 to +250 °CTwinDISPLAY
UF260TS256 l+20 to +250 °CTwinDISPLAY
UF450TS449 l+20 to +250 °CTwinDISPLAY
UF750TS749 l+20 to +250 °CTwinDISPLAY
UF1250TS (on request)1,248 l+20 to +250 °CTwinDISPLAY

Scope of delivery

  • Pass-through oven UF160TS with fully insulated stainless steel doors on both sides
  • Factory calibration certificate (calibration at +160 °C)
  • 2x stainless steel grid shelf, electropolished
  • Unit with feet

Regulatory information

The device is an electrical device within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances can be found on our page Environment and disposal.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit set without air slots (B33204). It covers the gap between the pass-through oven and the wall opening with stainless steel. According to Memmert, the installation situation must be clarified technically beforehand. The set is therefore available on request through our procurement service.

Individual requirements and procurement service

For the UF160TS, options available include a full-view glass door with 4-layer insulating glazing up to 250 °C, a door interlock for alternating opening as contamination protection for wall installation, an additional Pt100 sensor and a 115 V voltage variant. In addition, reinforced stainless steel grid shelves, slide-in and base drip trays, a built-in frame set for wall installation or a USB-Ethernet adapter can be ordered. For qualification and maintenance, we arrange factory and DAkkS calibration, IQ/OQ documentation according to DIN 12880:2007-05 as well as instruction and maintenance contracts. For individual requirements or questions about the right configuration, our procurement service will support you.

Volume: 161 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20165 for sizes 105, 110, 150 and 160
Manufacturer number: E20165

The E20165 stainless steel grid is an electropolished shelf for 43 Memmert models in sizes 105, 110, 150 and 160. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example IF110 or UF110.For sizes 110 and 160, 2 grids are fitted as standard, and the interior holds up to 5 grids (size 110) or 8 grids (size 160). The HCP105 and HCP150 humidity chambers have 2 perforated shelves as standard; the maximum number there is 6 (HCP105) and 10 (HCP150). According to Memmert, the load per shelf is 20 kg, and 15 kg for the HCP105 and HCP150. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and medium-sized sample series in routine operation, for example in the UF110Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material specimens and material samples, for example in the UF160Environmental tests and environmental simulations in the HCP105 and HCP150 humidity chambersSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)IF110bw2520108IF1102520108IN110plus2520108UF1102520108UN110pa2520108UN160pa2820161IF1602820161IN1602820161IF110plus2520108IF160plus2820161IN160plus2820161UF110plus2520108UN1102520108UN110plus2520108UF1602820161UF160plus2820161UN1602820161UN160plus2820161IN1102520108IPP110eco2520108IPP110ecoplus2520108HPP110eco2520108HCP1052 (perforated shelf)615107HCP1502 (perforated shelf)1015156ICH1102520108ICP1102520108IN110m2520108IN110mplus2520108IF110m2520108IF110mplus2520108IN160m2820161IN160mplus2820161IF160m2820161IF160mplus2820161UN110m2520108UN110mplus2520108UF110m2520108UF110mplus2520108UN160m2820161UN160mplus2820161UF160m2820161UF160mplus2820161UF160TS2820161The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP105 and HCP150Scope of delivery1 stainless steel grid, electropolished (E20165)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €98.04
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02073 for sizes 110 and 160
Manufacturer number: B02073

B02073 is a stainless steel slide-in drip tray with a 15 mm rim for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160. It collects dripping liquid. According to Memmert, the maximum load is 3 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example IF110 or UF110.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04359). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Drying laboratory glassware and sample vessels in routine operation, for example in the UF160Embedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenSuitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelRim15 mmMaximum load according to Memmert3 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €117.82
memmert boden abtropfschale
Memmert stainless steel base drip tray B04359 for sizes 110 and 160
Manufacturer number: B04359

The B04359 base drip tray is made of stainless steel and has a 15 mm rim. It is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160 and collects dripping liquid. According to Memmert, the maximum load per base drip tray for these sizes is 3 kg. The size corresponds to the number in the unit name, for example IF110 or UF110.In addition, according to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02073). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Drying laboratory glassware and sample vessels in routine operation, for example in the UF160Embedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenSuitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelRim15 mmMaximum load according to Memmert3 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €171.14
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68508 for sizes 110 and 160
Manufacturer number: B68508

This stainless steel perforated tray (B68508) is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 110 and 160. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example IF110 or UF110. The image is for illustration only.According to Memmert, a maximum of 20 kg is permitted per shelf. If you want to load several shelves, also check the maximum load per unit in the data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and medium-sized sample series in routine operation, for example in the UF110Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material specimens and material samples, for example in the UF160Suitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €163.40