Skip to main content Skip to search Skip to main navigation

Memmert UF450plus universal oven, heating and drying oven with forced air circulation and TwinDISPLAY, 449 litres, up to 300 °C, on castors

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert UF450plus universal oven, heating and drying oven with forced air circulation and TwinDISPLAY, 449 litres, up to 300 °C, on castors"

The Memmert UF450plus universal oven combines the series’ medium-sized 449-litre capacity with the TwinDISPLAY safety features: two redundant Pt100 sensors, HeatBALANCE and AutoSAFETY ensure process reliability even during long, unattended runs. The temperature range extends from 20 to 300 °C, whilst the electronically controlled air turbine actively distributes the heat throughout the interior. Fitted with castors that can be locked in place, the cabinet, which weighs around 161 kg, can be moved despite its size. The UF450plus also serves as the technical basis for the medical version, the UF450mplus, which is designed for a different purpose.

Forced air circulation with redundant temperature measurement

The UF450plus’s air turbine, which is electronically controllable in 10 % increments, actively distributes the heat throughout the interior and achieves an operating temperature range from at least 10 °C above room temperature up to 300 °C. Two DIN Class A Pt100 sensors in a 4-wire configuration monitor each other; if one fails, the second automatically takes over its function. The setting accuracy is 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards. Preheated fresh air is introduced via an electronically adjustable exhaust air damper; the exhaust air outlet with throttle valve can also be controlled electronically.

ControlCOCKPIT TwinDISPLAY: HeatBALANCE and AutoSAFETY

The UF450plus is controlled via the ControlCOCKPIT TwinDISPLAY, which features two high-resolution TFT colour graphic displays. The HeatBALANCE function allows for fine-tuning of the heat output distribution between the upper and lower heating groups from -50 to +50 %, for example to compensate for temperature differences caused by unevenly distributed loads. AutoSAFETY also monitors over- and under-temperature conditions, automatically tracks the setpoint within a freely selectable tolerance range, and triggers visual and audible alarms in the event of a deviation. Programmes are programmed, managed and transferred via an Ethernet interface or USB port using the AtmoCONTROL software. A programmable door lock and a door-open detection feature can be added as optional extras.

Capacity and connections of the Memmert UF450plus universal oven

The interior measures 1,040 x 720 x 600 mm and accommodates 2 electropolished stainless steel grid shelves as standard; up to 8 shelves are possible in total. The permissible total load is up to 300 kg, with a maximum of 30 kg per shelf. The external dimensions of the cabinet are 1,224 x 1,247 x 784 mm, and the net weight is approximately 161 kg. The interior consists of easy-to-clean stainless steel, reinforced by deep-drawn ribbing, with protected, integrated 4-sided all-round heating; the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel. The UF450plus is connected to a 400 V three-phase supply and 3 x 230 V without a neutral conductor at 50/60 Hz, with a power consumption of around 5,800 W.

Choosing the right size from the UF range

Eight sizes ranging from 53 to 1,060 litres internal volume make up the Memmert UF range with forced air circulation, each also available with TwinDISPLAY. When selecting the appropriate size, the key factors, alongside the volume, are the footprint and the number of shelves required.

ModelInternal volume
UF5553 l, footprint 585 x 514 mm, max. 4 shelves
UF7574 l, footprint 585 x 514 mm, max. 6 shelves
UF110108 l, footprint 745 x 584 mm, max. 5 shelves
UF160161 l, footprint 745 x 584 mm, max. 8 shelves
UF260256 l, footprint 824 x 684 mm, max. 9 shelves
UF450449 l, footprint 1,224 x 784 mm, max. 8 shelves
UF750749 l, footprint 1,224 x 784 mm, max. 14 shelves
UF10601,060 l, footprint 1,224 x 1,035 mm, max. 14 shelves

The UF450plus sits between the Memmert UF260plus universal oven (256 litres) and the very large models starting at 749 litres. If you require even more capacity, you will find it in the Memmert UF750plus universal oven. You can find all sizes in this range in our Climate Chambers & Incubators range.

Differences from SingleDISPLAY, natural convection and the medical version

Those who can do without sensor redundancy can save money with the Memmert UF450 universal oven in the basic model with SingleDISPLAY. For samples sensitive to dust or air movement, the Memmert UN450plus universal oven offers the same housing with natural convection instead of an air turbine, whilst retaining the TwinDISPLAY. A third variant is the Memmert UF450mplus universal oven, which is largely identical in design but is classified as a Class I medical device intended for heating and maintaining the temperature of fango, silicate and APS packs in physiotherapy, rather than for laboratory drying and tempering processes. Anyone looking for a laboratory or industrial unit should opt for the UF450plus described here, rather than the mplus model.

Safety according to DIN 12880, enhanced by AutoSAFETY

In addition to the adjustable electronic temperature monitoring and AutoSAFETY, the UF450plus features a mechanical temperature limiter of protection class 1 according to DIN 12880, which switches off the heating when the temperature reaches approximately 20 °C above the maximum cabinet temperature. The display also allows you to select either an adjustable temperature monitor of protection class 3.1 or an adjustable temperature limiter of protection class 2. An integrated self-diagnostic system assists with fault-finding, and 3 freely selectable temperature values can be calibrated. The unit bears CE and EAC markings as well as a UL mark.

Installation, operation and disposal

For operation, a minimum clearance of 15 cm from the wall and a minimum clearance of 20 cm from the ceiling must be maintained; a minimum clearance of 5 cm is sufficient on the sides from the wall or an adjacent unit. Installation is permitted at altitudes of up to 2,000 m above sea level at an ambient temperature of 5 °C to 40 °C and a relative humidity of no more than 80 %, non-condensing. Electrically, the cabinet is designed for overvoltage category II and pollution degree 2; it must only be transported in an upright position. Thanks to its castors, the UF450plus can still be moved within these specifications even after installation. As an electrical appliance, at the end of its service life it is subject to the Electrical and Electronic Equipment Act and must not be disposed of with household waste; see Regulatory information below.

Typical applications

With an internal volume of 449 litres and redundant sensor technology, the Memmert UF450plus universal oven is suitable for medium to large batches with increased requirements for process reliability.

  • Unattended drying and tempering overnight or at weekends
  • Material testing in industrial manufacturing where documentation is required
  • Curing and testing in quality assurance with medium to high sample volumes
  • Heat treatment processes in science and research with long process times
  • An intermediate size for laboratories that require more capacity than the UF260plus can provide

When TwinDISPLAY is worthwhile

The scope of delivery for the UF450plus includes 2 electropolished stainless steel grid shelves; the cabinet is designed to accommodate up to 8 shelves. TwinDISPLAY is particularly worthwhile where processes run unattended overnight or at weekends and where a sensor failure would otherwise jeopardise the entire batch. Those who do not require this redundancy can save money by opting for the Memmert UF450 universal oven in its basic model. A fully transparent glass door is available as an option for visual inspection without opening the door, as is a programmable door lock with door-open detection and a potential-free alarm contact for connection to a building management system. For pharmaceutical or standard-compliant applications, we arrange calibration, IQ/OQ/PQ and maintenance services, including those accredited by DAkkS.

Frequently asked questions before purchase

What are the specific benefits of the second Pt100 sensor?
The two sensors monitor each other; if one sensor fails, the process continues uninterrupted using the second one.

How many shelves fit into the UF450plus?
Two grid shelves are included as standard; up to 8 shelves, each with a maximum load of 30 kg, are possible, with a total load capacity of up to 300 kg.

Is the UF450plus the same unit as the medical UF450mplus?
Technically, they are largely identical in construction, but the Memmert UF450mplus universal oven is a Class I medical device for physiotherapy, whereas the UF450plus is intended for laboratory and industrial applications.

Is TwinDISPLAY worth it for routine operation?
For simple drying tasks during the day, SingleDISPLAY is usually sufficient. For unattended overnight runs, the UF450plus is the safer choice compared to the Memmert UF450 universal oven.

What power supply is required?
400 V three-phase current with 3 x 230 V without a neutral conductor at 50/60 Hz and a power consumption of approximately 5,800 W.

Is a natural convection version with TwinDISPLAY available?
Yes, the Memmert UN450plus universal oven shares the same housing as the UF450plus, but operates without an air turbine.

Is the UF450plus mobile?
Yes, it is mobile and lockable on castors and can be repositioned within the permitted installation conditions despite its net weight of around 161 kg.

Technical details

Adjustable temperature range20 to 300 °C
Operating temperature rangeat least 10 °C above room temperature up to 300 °C
Temperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Temperature sensor2x Pt100, DIN Class A, 4-wire measurement, redundant
Internal volume449 l
Internal dimensions (W x H x D)1,040 x 720 x 600 mm (depth minus 39 mm for the fan)
External dimensions of housing (W x H x D)1,224 x 1,247 x 784 mm
Net weightapprox. 161 kg
Connection400 V and 3 x 230 V, 50/60 Hz, approx. 5,800 W
Maximum number of shelves8
Shelves included in scope of delivery2
Max. load on unit300 kg
Max. load per shelf30 kg
Interior materialStainless steel, 4-sided all-round heating
Casing materialTextured stainless steel, galvanised sheet steel rear panel
Control systemControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic displays
Additional functionsHeatBALANCE, AutoSAFETY, visual and audible alarm
InstallationMobile and lockable on castors
Permissible ambient temperature5 °C to 40 °C
Permissible relative humiditymax. 80 % relative, non-condensing
Maximum installation height2,000 m
MarkingsCE, EAC, UL marks

Scope of delivery

  • 1x Memmert UF450plus universal oven
  • Factory calibration certificate (calibration at 160 °C)
  • Fully insulated stainless steel doors with 2-point locking (compression door lock)
  • 2x stainless steel grid shelf, electropolished

Regulatory information

The Memmert UF450plus universal oven is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29740) or without air slots (B29741). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

Options available for the UF450plus include fully transparent glass doors, interior lighting and a power socket, a gas-tight interior, a potential-free alarm contact, MobileALERT remote monitoring, and a USB user ID stick for TwinDISPLAY user rights. For data acquisition, a USB-to-Ethernet adapter and AtmoCONTROL software licences, also as AtmoCONTROL FDA for 21 CFR Part 11, are available. In addition, we arrange calibration, IQ/OQ/PQ and maintenance services, some of which are DAkkS-accredited. Do you require any of these accessories or assistance in selecting the right universal oven for your application? Through our procurement service, we are happy to assist you with procurement and configuration.

Certification marks: GS (VDE)
Volume: 449 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20182 for sizes 450 and 750
Manufacturer number: E20182

The E20182 stainless steel grid is an electropolished shelf for 42 Memmert models in sizes 450 and 750. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UF450 or UN450.All 42 models have 2 grids as standard. The maximum number is 8 grids (size 450) and 14 grids (size 750). According to Memmert, the load per shelf is 30 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Large-volume drying and heat treatment batches in industry and research, for example in the UF450Incubating very large sample quantities or several batches in research and medicine, for example in the IF750Large-volume stability studies of several batches according to ICH Q1A in contract laboratories and pharmaceutical manufacturing, for example in the HPP750ecoHeat treatment of very large material batches in industrial multi-shift operation, for example in the UN750Suitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UN450plus2830449UF450plus2830449UF4502830449UN4502830449UF750plus21430749UF75021430749UN75021430749UN750plus21430749IN450plus2830449IN4502830449IF750plus21430749IF450plus2830449IN75021430749IF75021430749IF4502830449IN750plus21430749IF750bw21430749IF450bw2830449IPP750eco21430749IPP750ecoPlus21430749HPP750eco21430749ICH75021430749ICP4502830449ICP75021430749IN450m2830449IN450mplus2830449IF450m2830449IF450mplus2830449IN750m21430749IN750mplus21430749IF750m21430749IF750mplus21430749UN450m2830449UN450mplus2830449UF450m2830449UF450mplus2830449UN750m21430749UN750mplus21430749UF750m21430749UF750mplus21430749UF450TS2830449UF750TS21430749The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert30 kgScope of delivery1 stainless steel grid, electropolished (E20182)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €207.26
memmert rohrverlaengerung gerade
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29718

The straight slip-on pipe extension B29718 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The angled version is also available (B29719). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 straight slip-on pipe extensionIndividual requirements & procurement serviceFor the angled version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €41.28
memmert rohrverlaengerung gewinkelt
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29719

The angled slip-on pipe extension B29719 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The straight version is also available (B29718). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material samples in series, for example in the UN260Testing and curing of larger components in quality assurance, for example in the UF750Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 angled slip-on pipe extensionIndividual requirements & procurement serviceFor the straight version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €108.36
memmert boden abtropfschale
Memmert stainless steel base drip tray B04362 for sizes 450 and 750
Manufacturer number: B04362

The stainless steel base drip tray B04362 is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750. It has a 15 mm rim, collects dripping liquid and, according to Memmert, can bear a maximum of 8 kg. The size corresponds to the number in the unit name, for example UF450 or UN450.According to Memmert, it can impair the spatial temperature distribution. According to Memmert, it cannot be used in conjunction with option K1, the interior modification with support rails for reinforced grids and perforated trays. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02075). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying large quantities of laboratory glassware and sample vessels in multi-shift operation, for example in the UF750Forcing tests for beer stability, for example in the IPP750ecoShelf-life tests on dairy products, for example in the IPP750ecoSuitable forModelSizeInterior volume (l)UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749IN450plus450449IN450450449IF750plus750749IF450plus450449IN750750749IF750750749IF450450449IN750plus750749IPP750eco750749IPP750ecoPlus750749HPP750eco750749ICH750750749ICP450450449ICP750750749IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF450TS450449UF750TS750749Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert8 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €326.80
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68518 for sizes 450 and 750
Manufacturer number: B68518

B68518 is a stainless steel perforated tray for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 450 and 750. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UF450 or UN450. The image is for illustration only.Memmert specifies 30 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Large-volume drying and heat treatment batches in industry and research, for example in the UF450Incubating very large sample quantities or several batches in research and medicine, for example in the IF750Large-volume stability studies of several batches according to ICH Q1A in contract laboratories and pharmaceutical manufacturing, for example in the HPP750ecoHeat treatment of very large material batches in industrial multi-shift operation, for example in the UN750Suitable forModelSizeInterior volume (l)UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749IN450plus450449IN450450449IF750plus750749IF450plus450449IN750750749IF750750749IF450450449IN750plus750749IF750bw750749IF450bw450449IPP750eco750749IPP750ecoPlus750749HPP750eco750749ICH750750749ICP450450449ICP750750749IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF450TS450449UF750TS750749Technical detailsMaterialStainless steelLoad per shelf according to Memmert30 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €344.00
memmert untergestell nivellierbar
Memmert levelling base frame B29753, height 500 mm, for size 450
Manufacturer number: B29753

The levelling base frame B29753 has a height of 500 mm. It is intended for Memmert U and Um universal ovens, I and Im incubators and IFbw blanket warmers in size 450. The size corresponds to the number in the unit name, for example UF450 or UN450.In total, it fits 17 models of this size. The image is for illustration only.Typical applicationsUnits of size 450 are placed on the base frame. Typical uses of these units:Large-volume drying and heat treatment batches in industry and research, for example in the UF450Incubating large quantities of samples in research and medicine, for example in the IF450Vibration-free heat treatment of dust-sensitive materials on a large scale, for example in the UN450Suitable forModelSizeInterior volume (l)UN450plus450449UF450plus450449UF450450449UN450450449IN450plus450449IN450450449IF450plus450449IF450450449IF450bw450449IN450m450449IN450mplus450449IF450m450449IF450mplus450449UN450m450449UN450mplus450449UF450m450449UF450mplus450449Technical detailsHeight500 mmScope of delivery1 levelling base frame, height 500 mmIndividual requirements & procurement serviceFor base frames for other unit sizes and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €573.62
Memmert stainless steel slide-in drip tray B32763 for sizes 450 and 750, option K1 required
Manufacturer number: B32763

Only for units with factory option K1. The drip tray only fits units that were equipped with option K1 at the factory, a modification of the interior with support rails for reinforced grids and perforated trays. This option is available for sizes 450 and 750 and only ex works. If in doubt, ask us before ordering and state the serial number of your unit. For a new unit, option K1 can be ordered on request. The size corresponds to the number in the unit name, for example IF450 or IN450.The B32763 slide-in drip tray is made of stainless steel, has a 15 mm rim and collects dripping liquid. It is supplied with guide rails and fixing screws and is the version for units with option K1. For units without option K1, the B02075 slide-in drip tray is also available.According to Memmert, it can impair the spatial temperature distribution. It is intended for Memmert units in the U, UF TS, I, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying large quantities of laboratory glassware and sample vessels in multi-shift operation, for example in the UF750Forcing tests for beer stability, for example in the IPP750ecoShelf-life tests on dairy products, for example in the IPP750ecoSuitable forModelSizeInterior volume (l)IF450450449IN450450449IF450plus450449IN450plus450449ICP450450449UF450450449UN450450449UF450plus450449UN450plus450449UF450TS450449HPP750eco750749IF750750749IN750750749IF750plus750749IN750plus750749ICH750750749ICP750750749IPP750eco750749IPP750ecoplus750749UF750750749UN750750749UF750plus750749UN750plus750749UF750TS750749Technical detailsMaterialStainless steelRim15 mmRequired optionK1 (ex works only)Scope of delivery1 stainless steel slide-in drip tray, 15 mm rim, with guide rails and fixing screwsIndividual requirements & procurement serviceFor the drip tray without option K1, for grids and perforated trays of the same size and for questions about option K1, our procurement service accepts enquiries.

Manufacturer's RRP: €253.70
Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert reinforced stainless steel grid B32190 for sizes 450 and 750, option K1 required
Manufacturer number: B32190

Only for units with factory option K1. The grid only fits units that were equipped with option K1 at the factory, a modification of the interior for reinforced grids. This option is only available ex works. If in doubt, ask us before ordering and state the serial number of your unit. For a new unit, option K1 can be ordered on request.The reinforced stainless steel grid B32190 is electropolished and, according to Memmert, can bear up to 60 kg. According to Memmert, the standard grids carry 30 kg per shelf in these sizes. The grid is a shelf level in the interior. It is intended for Memmert units in the U, I, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750. The size corresponds to the number in the unit name, for example IF450 or IN450.Please note the maximum load per unit, as it limits the total load of all shelves. The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsTypical uses in the compatible units:Heavier loading with reinforced grids or perforated trays up to 60 kg in conjunction with option K1, for example in the IPP750ecoplusTesting and curing of larger components in quality assurance, for example in the UF750Environmental tests from freezing point upwards for larger, heavy test specimens, for example in the HPP750ecoSuitable forModelSizeInterior volume (l)ICP450450449IF450450449IF450plus450449IN450450449IN450plus450449UF450450449UF450TS450449UF450plus450449UN450450449UN450plus450449HPP750eco750749ICH750750749ICP750750749IF750750749IF750plus750749IN750750749IN750plus750749IPP750eco750749IPP750ecoPlus750749UF750750749UF750TS750749UF750plus750749UN750750749UN750plus750749Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmertup to 60 kgScope of delivery1 reinforced stainless steel grid, electropolished, with guide rails and fixing screwsIndividual requirements & procurement serviceFor standard grids, perforated trays and drip trays of the same size, for questions about option K1 and about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €508.26
Memmert stainless steel base drip tray B34055 for sizes 450 and 750, option K1 required
Manufacturer number: B34055

Only for units with factory option K1. The drip tray only fits units that were equipped with option K1 at the factory, a modification of the interior with support rails for reinforced grids and perforated trays. This option is available for sizes 450 and 750 and only ex works. If in doubt, ask us before ordering and state the serial number of your unit. For a new unit, option K1 can be ordered on request. The size corresponds to the number in the unit name, for example IF450 or IN450.The B34055 base drip tray is made of stainless steel, has a 15 mm rim and collects dripping liquid. It is the version for units with option K1. For units without option K1, the B04362 base drip tray is also available.Memmert points out that it can impair the spatial temperature distribution. It is intended for Memmert units in the U, UF TS, I, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750. The table of compatible models shows which series is available in which size.Typical applicationsTasks that occur in the compatible units include, for example:Drying large quantities of laboratory glassware and sample vessels in multi-shift operation, for example in the UF750Shelf-life tests on dairy products, for example in the IPP750ecoForcing tests for beer stability, for example in the IPP750ecoSuitable forModelSizeInterior volume (l)IF450450449IN450450449IF450plus450449IN450plus450449ICP450450449UF450450449UN450450449UF450plus450449UN450plus450449UF450TS450449HPP750eco750749IF750750749IN750750749IF750plus750749IN750plus750749ICH750750749ICP750750749IPP750eco750749IPP750ecoplus750749UF750750749UN750750749UF750plus750749UN750plus750749UF750TS750749Technical detailsMaterialStainless steelRim15 mmRequired optionK1 (ex works only)Scope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray without option K1 and the slide-in drip tray, for questions about option K1 and about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €326.80
Stainless steel perforated shelf, illustration
Memmert reinforced stainless steel perforated tray B68521 for sizes 450 and 750, option K1 required
Manufacturer number: B68521

Only for units with factory option K1. The perforated tray only fits units that were equipped with option K1 at the factory, a modification of the interior with support rails for reinforced grids and perforated trays. This option is available for sizes 450 and 750 and only ex works. If in doubt, ask us before ordering and state the serial number of your unit. For a new unit, option K1 can be ordered on request. The size corresponds to the number in the unit name, for example IF450 or IN450.According to Memmert, the reinforced stainless steel perforated tray B68521 can bear up to 60 kg and is supplied with guide rails and fixing screws. According to Memmert, the standard perforated tray B68518 carries 30 kg per shelf in these sizes. The perforated tray is a shelf level in the interior. It is intended for Memmert units in the U, UF TS, I, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750. The image is for illustration only.Please note the maximum load per unit. It limits the total load of all shelves. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Heavier loading with reinforced grids or perforated trays up to 60 kg in conjunction with option K1, for example in the IPP750ecoplusHeat treatment of very large material batches in industrial multi-shift operation, for example in the UN750Environmental tests from freezing point upwards for larger, heavy test specimens, for example in the HPP750ecoSuitable forModelSizeInterior volume (l)IF450450449IN450450449IF450plus450449IN450plus450449ICP450450449UF450450449UN450450449UF450plus450449UN450plus450449UF450TS450449HPP750eco750749IF750750749IN750750749IF750plus750749IN750plus750749ICH750750749ICP750750749IPP750eco750749IPP750ecoplus750749UF750750749UN750750749UF750plus750749UN750plus750749UF750TS750749Technical detailsMaterialStainless steelVersionreinforcedLoad capacity according to Memmertup to 60 kgRequired optionK1 (ex works only)Scope of delivery1 reinforced stainless steel perforated tray with guide rails and fixing screwsIndividual requirements & procurement serviceFor standard perforated trays, grids and drip trays of the same size, for questions about option K1 and about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €842.80
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02075 for sizes 450 and 750
Manufacturer number: B02075

The B02075 slide-in drip tray is made of stainless steel, has a 15 mm rim and collects dripping liquid. It is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750; according to Memmert, the maximum load is 8 kg. The size corresponds to the number in the unit name, for example UF450 or UN450.Memmert points out that it can impair the spatial temperature distribution. It cannot be used in conjunction with option K1, the interior modification with support rails for reinforced grids and perforated trays. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04362). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying large quantities of laboratory glassware and sample vessels in multi-shift operation, for example in the UF750Forcing tests for beer stability, for example in the IPP750ecoShelf-life tests on dairy products, for example in the IPP750ecoSuitable forModelSizeInterior volume (l)UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749IN450plus450449IN450450449IF750plus750749IF450plus450449IN750750749IF750750749IF450450449IN750plus750749IPP750eco750749IPP750ecoPlus750749HPP750eco750749ICH750750749ICP450450449ICP750750749IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF450TS450449UF750TS750749Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert8 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €253.70