IKA T 10 Battery-powered Portable Solution Disperser Set, 0.5 to 100 ml, up to 30,000 rpm, 0010015684

The T 10 battery Portable Solution combines the battery-powered T 10 battery ULTRA-TURRAX disperser with a matching dispersing tool to form a ready-to-use set. For those looking for a basic mobile kit for sampling outside the laboratory, this eliminates the need to select a tool separately from the range of accessories.

What’s included in the set

In addition to the drive unit, the set includes an S 10 N - 5 G dispersing tool, a reusable stainless steel tool with a diameter of 5 millimetres. You can start using it straight out of the box, without having to order a suitable tool size separately beforehand. A stand and clamp are not included in this starter set; those wishing to work in a stationary setup will find the appropriate equipment in the T 10 battery Complete Solution.

Battery operation for mobile use

The battery consists of three permanently fitted LiPo cells with a voltage of 10.8 volts and an energy capacity of 34.56 watt-hours; it is charged via a USB-C cable or charging clamp. The device remains operational even without a power socket within reach. The speed can be adjusted continuously between 8,000 and 30,000 revolutions per minute via the LCD display, whilst a timer facilitates reproducible process steps.

Brushless motor for quiet operation

The brushless DC motor operates at a noise level of 65 dB(A) without a tool attached and draws a maximum of 45 watts when charging from the mains; during actual use, the motor is powered solely by the battery. The working volume ranges from 0.5 to 100 millilitres (H₂O), and the maximum viscosity is 200 mPas.

Add accessories as required

If your requirements exceed those of the supplied S 10 N - 5 G tool, further dispersing tools from the same T-10 series are available in other diameters, as well as an R 104 stand with an H 44 cross-sleeve for a later switch to stationary operation. Those who require this equipment from the outset can avoid having to purchase additional items later and opt directly for the T 10 Battery Complete Solution.

Typical applications

• Sampling in the field or on site visits without mains power
• Homogenisation of small volumes directly at the sampling site
• Mobile quality control with a dedicated tool

Selection guide: Portable, Complete or Tissue Safe?

The Portable Solution is the most compact of the three T-10 battery sets, designed for anyone looking for a ready-to-use basic set without a stand. Those who also wish to work in a stationary setup with a stand and clamp will find the right equipment in the T 10 battery Complete Solution. Those who primarily process tissue samples and need to prevent cross-contamination between samples are better served by the disposable tools of the T 10 battery Tissue Safe Solution. The drive unit alone, without tools, is available as the T 10 battery ULTRA-TURRAX; for mains operation without a battery, it is available as the T 10 basic ULTRA-TURRAX.

Technical details

Contents

• T 10 battery ULTRA-TURRAX drive unit including permanently fitted battery
• S 10 N - 5 G mixing tool, reusable, stainless steel, 5 mm

Regulatory information

The drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). It contains a permanently installed lithium battery and, together with the battery, must not be disposed of with household waste. The WEEE registration number of the manufacturer IKA is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.

Warranty and procurement service

The T 10 battery Portable Solution is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For additional accessories such as further dispersing tools, a stand or a clamp, LT Laborhandel’s procurement service will handle the assembly.