Memmert IF30 incubator, 32 l, +20 to +80 °C, SingleDISPLAY
€1,308.00
Delivery time: 2-3 weeks
- Compact forced-air incubator with an internal volume of 32 litres
- Setting range +20 to +80 °C, setting accuracy 0.1 °C
- SingleDISPLAY ControlCOCKPIT with TFT colour graphic display
- Mechanical temperature limiter according to DIN 12880
- Up to 3 shelves, 60 kg maximum total load
- Factory calibration certificate at +37 °C included
Product information "Memmert IF30 incubator, 32 l, +20 to +80 °C, SingleDISPLAY"
With an internal volume of 32 litres, the Memmert IF30 incubator has the smallest internal volume in the IF series and, with external dimensions of 585 x 704 x 434 mm, takes up a comparatively small amount of floor space. With forced air circulation and a temperature range of +20 to +80 °C, it is suitable for incubating and temperature-controlling individual samples or small batches.
Construction and air flow
An electronically controlled air turbine circulates the air inside the interior and can be adjusted in 10 % increments, whilst operating quietly. An electronically adjustable exhaust air damper mixes in preheated fresh air; the exhaust air outlet itself also features an electronically adjustable throttle valve. The interior of the IF30 is reinforced with deep-drawn ribbing and features a protected, integrated 4-sided all-round heating system; the housing has a fully galvanised sheet steel rear panel.
Control via the ControlCOCKPIT
The IF30 is controlled via a SingleDISPLAY with a high-resolution TFT colour graphics display; the temperature is measured by a DIN Class A Pt100 sensor using a 4-wire measurement. The setting accuracy is 0.1 °C. The SetpointWAIT function ensures that the process time only starts once the setpoint temperature has actually been reached; a digital countdown timer covers target times ranging from 1 minute to 99 days. Three freely selectable temperature values can be calibrated, whilst a self-diagnostic system assists with troubleshooting. The programme sequence remains stored in the event of a power failure, and the data logger can be read out and managed via the Ethernet interface.
Safety according to DIN 12880
A mechanical temperature limiter, protection class 1 according to DIN 12880, switches off the heating when the temperature rises to approximately 20 °C above the maximum cabinet temperature; in addition, the electronic temperature monitoring can be adjusted. The fully insulated stainless steel door with an internal glass door closes with a 2-point locking system as a compression door lock.
Guide to choosing the right size
With one stainless steel grid shelf in the scope of delivery and up to three possible shelves, the IF30 is designed for small sample quantities; the maximum total load is 60 kg, with 20 kg per shelf. Those who regularly wish to incubate more samples at the same time will find more capacity in the neighbouring IF55 with an internal volume of 53 litres and up to four shelves.
Typical applications
With an internal volume of 32 litres, the IF30 is suitable as an incubator for incubating and temperature-controlling individual samples or small batches in research, medicine, pharmacy, food analysis and food chemistry.
- Incubation of individual samples in research and medicine
- Temperature control of small batches of samples in the pharmaceutical industry
- Incubation processes in food analysis and food chemistry
Technical details
| Setting temperature range | +20 to +80 °C |
| Working temperature range | at least 10 °C above room temperature up to +80 °C |
| Temperature setting accuracy | 0.1 °C |
| Temperature sensor | 1x Pt100, DIN Class A, 4-wire measurement |
| Internal volume | 32 l |
| Internal dimensions (W x H x D) | 400 x 320 x 250 mm |
| External dimensions of the housing (W x H x D) | 585 × 704 × 434 mm |
| Net weight | approx. 48 kg |
| Connected load 230 V | 50/60 Hz, approx. 1,600 W |
| Connected load 115 V (optional) | 50/60 Hz, approx. 800 W |
| Maximum number of shelves | 3 |
| Shelves included in scope of delivery | 1 |
| Max. load on the unit | 60 kg |
| Maximum load per shelf | 20 kg |
| Interior | deep-drawn ribbed, 4-sided all-round heating |
| Control | ControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphics display |
| Permissible ambient temperature | +5 °C to +40 °C |
| Permissible humidity | max. 80 % relative humidity, non-condensing |
| Maximum installation altitude | 2,000 m |
| Markings | CE, VDE GS, UL |
Other sizes in the series
The IF series with SingleDISPLAY ranges from 32 to 749 litres in internal volume, listed by internal volume:
| Model | Internal volume | Setting temperature | Display |
|---|---|---|---|
| IF30 (this page) | 32 l | +20 to +80 °C | SingleDISPLAY |
| IF55 | 53 l | +20 to +80 °C | SingleDISPLAY |
| IF75 | 74 l | +20 to +80 °C | SingleDISPLAY |
| IF110 | 108 l | +20 to +80 °C | SingleDISPLAY |
| IF160 | 161 l | +20 to +80 °C | SingleDISPLAY |
| IF260 | 256 l | +20 to +80 °C | SingleDISPLAY |
| IF450 | 449 l | +20 to +80 °C | SingleDISPLAY |
| IF750 | 749 l | +20 to +80 °C | SingleDISPLAY |
This model is also available in the IF-plus series as the IF30plus, featuring TwinDISPLAY and two Pt100 sensors which monitor each other and take over operation in the event of a fault.
Scope of delivery
- Factory calibration certificate (at +37 °C)
- Fully insulated stainless steel door with a 2-point locking system (compression door lock) and an internal glass door, single-leaf
- 1 stainless steel grid shelf, electropolished
Regulatory information
This appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on returning old appliances can be found on our Environment and Disposal page.
Individual requirements and procurement service
For the IF30, options available ex-works include additional temperature monitoring, interior lighting and a power socket, as well as a version with the door hinged on the left. Accessories available include additional shelves and grids, a wall bracket and a USB-to-Ethernet adapter. We arrange calibration, IQ/OQ/PQ and maintenance services for qualification and maintenance. We are happy to advise you personally on individual requirements or any queries regarding the appropriate equipment.
| Volume: | 32 l |
|---|