Memmert reinforced stainless steel grid B32550 for size 1060

With a capacity of 1,060 litres, the Memmert universal oven UF1060 is the largest model in the entire UF range and is designed for batches that cannot be accommodated even in the 749-litre floor-standing model. The temperature range extends from 20 to 300 °C, and the electronically controlled air turbine actively distributes the heat throughout the spacious interior. A notable feature is the permissible load per shelf of up to 60 kg, more than on the smaller UF models, making the UF1060 suitable for heavy workpieces and components. Fitted with castors that can be locked in place, the cabinet, which weighs around 252 kg, can be moved around the laboratory or production hall despite its size.Forced air circulation in the largest size in the seriesWith an internal volume of 1,060 litres, active air circulation is practically essential for even heat distribution. The UF1060’s air turbine, which can be electronically controlled in 10 % increments, ensures that the working temperature range, from at least 10 °C above room temperature up to 300 °C, is reliably achieved, even with densely packed, heavy batches. A Pt100 temperature sensor of DIN Class A in a 4-wire configuration provides a setting accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards, regardless of the load. Preheated fresh air is introduced via an electronically adjustable exhaust air damper; the exhaust air outlet with throttle valve can also be controlled electronically.ControlCOCKPIT SingleDISPLAY for industrial useThe UF1060 is controlled via the ControlCOCKPIT SingleDISPLAY, an adaptive, multifunctional digital PID microprocessor controller with a high-resolution TFT colour graphics display. The following parameters can be adjusted: temperature in Celsius or Fahrenheit, the speed of the recirculation fan, the position of the exhaust air damper, the programme duration, as well as the time zone and summer/winter time. A digital countdown timer with target time can be set from 1 minute to 99 days; the SetpointWait function only starts the actual process time once the setpoint temperature has actually been reached, an important feature for long, unattended processes involving large batches. The integrated data logger can be read, managed and organised via the Ethernet interface; a time-limited trial version of the AtmoCONTROL software is available for download.Capacity and load-bearing capacity of the Memmert universal oven UF1060The interior measures 1,040 x 1,200 x 850 mm and comes fitted as standard with 2 electropolished stainless steel grid shelves; a total of up to 14 shelves are possible, as with the UF750. The key difference lies in the load capacity: whilst the UF750 has a load capacity of 30 kg per shelf, the UF1060 allows up to 60 kg per shelf, whilst still maintaining a total load capacity of 300 kg. The external dimensions of the housing are 1,224 x 1,720 x 1,035 mm, with a net weight of around 252 kg. The interior consists of easy-to-clean stainless steel, reinforced by deep-drawn ribbing, with protected, integrated 4-sided all-round heating; the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel. The UF1060 is connected to a 400 V three-phase supply and 3 x 230 V without a neutral conductor at 50/60 Hz, with a power consumption of around 7,000 W.Selection guide: choosing the right size from the UF rangeThe Memmert UF range with forced-air circulation comprises eight models, with capacities ranging from 53 to 1,060 litres. When selecting the appropriate size, the key factors to consider, in addition to the internal volume itself, are the footprint and the number of shelves required.ModelInternal volumeUF5553 l, footprint 585 x 514 mm, max. 4 shelvesUF7574 l, footprint 585 x 514 mm, max. 6 shelvesUF110108 l, footprint 745 x 584 mm, max. 5 shelvesUF160161 l, footprint 745 x 584 mm, max. 8 shelvesUF260256 l, footprint 824 x 684 mm, max. 9 shelvesUF450449 l, footprint 1,224 x 784 mm, max. 8 shelvesUF750749 l, footprint 1,224 x 784 mm, max. 14 shelvesUF10601,060 l, footprint 1,224 x 1,035 mm, max. 14 shelvesThe UF1060 sits at the top end of this range and offers the largest available capacity within the series. With the same width as the Memmert universal oven UF750 (footprint 1,224 x 784 mm), its greater depth (footprint 1,224 x 1,035 mm) provides around 300 litres more internal volume and twice the load capacity per shelf. Those who can make do with 749 litres and 30 kg per shelf will save on depth and purchase costs with the UF750. You can find all sizes in this range in our Climate Chambers & Incubators range.Differentiation: SingleDISPLAY, TwinDISPLAY and natural convectionThe UF1060 described here operates with SingleDISPLAY and a single Pt100 sensor. For unattended processes with higher safety requirements, the Memmert universal oven UF1060plus offers two redundant Pt100 sensors, the HeatBALANCE function and additional AutoSAFETY monitoring, each with two TFT displays instead of one. Memmert does not offer a natural convection variant of this size in the UN series as a 1,060-litre model; the largest natural convection model is the Memmert universal oven UN750 with a capacity of 749 litres. Anyone looking for a smaller forced-air alternative with the same width will find it in the Memmert universal oven UF750.Safety according to DIN 12880 for unattended operationIn addition to the adjustable electronic temperature monitoring, the UF1060 features a mechanical temperature limiter of protection class 1 according to DIN 12880, which switches off the heating when the temperature rises to approximately 20 °C above the maximum cabinet temperature, an important safety feature for overnight or weekend runs. An integrated self-diagnostic system assists with fault-finding, whilst the calibration function allows three freely selectable temperature values to be readjusted. The unit bears CE and EAC markings as well as a UL test mark.Installation, operation and disposalFor operation, a minimum distance of 15 cm from the wall and a minimum distance of 20 cm from the ceiling must be maintained; a minimum distance of 5 cm from the side of the wall or an adjacent unit is sufficient. The unit may be installed at altitudes of up to 2,000 m above sea level at an ambient temperature of 5 °C to 40 °C and a relative humidity of no more than 80 %, non-condensing. Electrically, the cabinet is designed for overvoltage category II and pollution degree 2; it must only be transported in an upright position. Thanks to its castors, the UF1060 can still be moved within these specifications even after installation. As an electrical appliance, at the end of its service life it is subject to the Electrical and Electronic Equipment Act and must not be disposed of with household waste; see Regulatory information below.Typical applicationsWith an internal volume of 1,060 litres, a load capacity of up to 60 kg per shelf and the ability to be moved on castors, the Memmert UF1060 universal oven is designed for particularly large or heavy batches.Drying and tempering large, heavy components in industrial manufacturingCuring and baking material samples in large quantities or of large dimensionsHigh-throughput material testing in quality assuranceCentral drying cabinet for several workgroups requiring maximum capacityHeat treatment processes in science and research involving large-volume test specimensInvestment rationale: Equipment tailored to the specific purposeThe scope of delivery for the UF1060 includes 2 electropolished stainless steel grid shelves; the cabinet is designed to accommodate up to 14 shelves, each with a load capacity of up to 60 kg. Customers who regularly use all levels should order additional grid shelves or perforated trays. A full-view glass door is available as an option for visual inspection without opening the door, as are interior lighting, an internal power socket and a gas-tight interior for applications requiring a controlled atmosphere. Those who run unattended cycles overnight or at weekends and wish to benefit from the additional redundancy of a second temperature sensor, complete with AutoSAFETY monitoring, will find the Memmert universal oven UF1060plus better suited. A USB-to-Ethernet adapter and AtmoCONTROL software licences are suitable for long-term data logging. For pharmaceutical or standards-governed applications, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request.Frequently asked questions before making a purchaseWhat is the maximum weight allowed for individual workpieces per shelf?Up to 60 kg per shelf, with a maximum total load of 300 kg for the cabinet.How many shelves fit into the UF1060?Two grid shelves are included as standard; up to 14 shelves can be accommodated in total.Can the cabinet be moved whilst in operation?Yes, the UF1060 is fitted with castors that allow it to be moved and locked in place, and can be repositioned within the permitted installation conditions despite its net weight of around 252 kg.What type of power supply is required?The UF1060 requires 400 V three-phase current (3 x 230 V) without a neutral conductor at 50/60 Hz and has a power consumption of approximately 7,000 W.What is the difference between the UF1060 and the UF750?Both offer up to 14 shelves and are equally wide (1,224 mm); however, the UF1060 has a larger internal volume (1,060 litres instead of 749 litres) due to its greater depth (1,035 instead of 784 mm), and allows for double the load per shelf, 60 kg instead of 30 kg.Is a TwinDISPLAY version available?Yes, the Memmert universal oven UF1060plus also features two redundant Pt100 sensors, HeatBALANCE and AutoSAFETY, for unattended processes with higher safety requirements.Is the UF1060 suitable for continuous overnight operation?The mechanical temperature limiter, which complies with Protection Class 1 as per DIN 12880, switches off the heating when the temperature rises by approximately 20 °C and is designed for unattended operation.Technical detailsSetting temperature range20 to 300 °CWorking temperature rangeat least 10 °C above room temperature up to 300 °CTemperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °CTemperature sensorPt100, DIN Class A, 4-wire measurementInternal volume1,060 lInternal dimensions (W x H x D)1,040 × 1,200 × 850 mm (depth minus 39 mm for the fan)External dimensions of the housing (W x H x D)1,224 × 1,720 × 1,035 mmNet weightapprox. 252 kgConnected load400 V and 3 x 230 V without neutral conductor, 50/60 Hz, approx. 7,000 WMaximum number of shelves14Shelves included in scope of delivery2Max. load on the unit300 kgMaximum load per shelf60 kgInterior materialsStainless steel, 4-sided all-round heatingHousing materialTextured stainless steel, galvanised sheet steel rear panelControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphics displayTimer1 minute to 99 days, digital countdown clockInstallationmobile and lockable on castorsPermissible ambient temperature5 °C to 40 °CPermissible humiditymax. 80 % relative humidity, non-condensingMaximum installation altitude2,000 mMarkingsCE, EAC, UL test markScope of delivery1x Memmert universal oven UF1060Factory calibration certificate (calibration at 160 °C)Fully insulated stainless steel doors with a 2-point locking system (compression door lock)2x stainless steel grid shelf, electropolishedRegulatory informationThe Memmert universal oven UF1060 is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.Individual requirements and procurement serviceThe UF1060 is available with, amongst other features, full-view glass doors, interior lighting and a power socket, a gas-tight interior, reinforced grid shelves and perforated trays, lockable doors, a potential-free alarm contact and MobileALERT remote monitoring. For data acquisition, a USB-to-Ethernet adapter and AtmoCONTROL software licences, including the AtmoCONTROL FDA version for 21 CFR Part 11, are available. In addition, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request. Do you require any of these accessories, a TwinDISPLAY version, or assistance in selecting the right universal oven for your application? Through our procurement service, we are happy to assist you with procurement and configuration.

With 1,060 litres, the Memmert universal oven UF1060plus is the largest model of the UF-plus series and stands on castors that can be moved and locked in the laboratory or in production. It accommodates up to 14 shelves with up to 60 kg each and is connected via three-phase current with approx. 7,000 W.Mobile housing for the largest chamber of the seriesThe housing of the UF1060plus can be moved and locked and stands on castors, and the interior measures 1,040 x 1,200 x 850 mm. Two stainless steel grid shelves are part of the standard equipment, expandable to up to 14 shelves with a maximum of 60 kg each, and a total load of 300 kg is permitted in all. The unit may only be transported in an upright position.Control with HeatBALANCEEven with 1,060 litres of chamber volume, the temperature measurement remains redundant: two DIN class A Pt100 sensors in 4-wire technology monitor each other, and control is via the ControlCOCKPIT TwinDISPLAY with two TFT colour graphic displays. With HeatBALANCE, the heating power between the upper and lower heating group can be shifted by -50 to +50 %. Programming is via Ethernet or USB with AtmoCONTROL.Temperature monitoring and safetyThe mechanical temperature limitation of protection class 1 according to DIN 12880 takes effect at about 20 °C above the maximum oven temperature. In addition, an adjustable temperature monitor (protection class 3.1) or an adjustable temperature limiter (protection class 2) can be selected on the display, and AutoSAFETY automatically follows the setpoint at a freely selectable distance, triggers a visual and audible alarm when the temperature is exceeded or fallen short of and switches off the heating when it is exceeded. A permissible ambient temperature of +5 °C to +40 °C applies at a maximum of 80 % relative humidity.Guide to choosing the right sizeThe UF1060plus is the largest model of the series, and there is no larger size. If less chamber volume is needed, the UF750plus with 749 litres is the next smaller size, see the size table below.Typical applicationsWith 1,060 litres of internal volume, the UF1060plus is suitable for drying, heating, tempering, ageing, baking, testing and curing in research, science, industry and quality assurance.Drying and tempering large batches with many shelves at the same timeHeating and curing larger components in industryCuring and baking large batches with redundant temperature measurementAgeing and testing large batches in quality assuranceTechnical detailsSetting temperature range+20 to +300 °CWorking temperature rangemin. 10 °C above room temperature to +300 °CTemperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °CTemperature sensor2x Pt100, DIN class A, 4-wire measurement, redundantInternal volume1,060 lInternal dimensions (W x H x D)1,040 x 1,200 x 850 mm (depth minus 39 mm for the fan)External dimensions of housing (W x H x D)1,224 x 1,720 x 1,035 mmNet weightapprox. 252 kgConnected load400 V and 3 x 230 V without neutral conductor, 50/60 Hz, approx. 7,000 WShelves max.14Shelves included in scope of delivery2Max. load of unit300 kgMax. load per shelf60 kgInteriordeep-drawn ribbed, 4-sided all-round heatingInstallation of housingmobile and lockable, on castorsControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic displayAdditional functionsHeatBALANCE, AutoSAFETY, visual and audible alarmPermissible ambient temperature+5 °C to +40 °CPermissible humiditymax. 80 % rel., non-condensingMax. installation altitude2,000 mMarkingsCE, VDE, GS, UL, EACOther sizes in the seriesFrom the 32-litre model to the 1,060-litre version shown here, the UF-plus series covers nine size steps:ModelInternal volumeSetting temperatureDisplayUF30plus32 l+20 to +300 °CTwinDISPLAYUF55plus53 l+20 to +300 °CTwinDISPLAYUF75plus74 l+20 to +300 °CTwinDISPLAYUF110plus108 l+20 to +300 °CTwinDISPLAYUF160plus161 l+20 to +300 °CTwinDISPLAYUF260plus256 l+20 to +300 °CTwinDISPLAYUF450plus449 l+20 to +300 °CTwinDISPLAYUF750plus749 l+20 to +300 °CTwinDISPLAYUF1060plus (this page)1,060 l+20 to +300 °CTwinDISPLAYThe same volume is also available in the UF series without the second sensor: UF1060.Scope of delivery1x Memmert universal oven UF1060plusFactory calibration certificate (calibration at +160 °C)Fully insulated stainless steel doors with 2-point locking (compression door lock)2x stainless steel grid shelf, electropolishedRegulatory informationThe device is an electrical device within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal.Individual requirements and procurement serviceFor the UF1060plus, a full-view glass door, interior lighting and socket, a programmable door lock and door-open detection, among other things, can be ordered from the factory. Suitable accessories include additional shelves and perforated trays, drip trays, a USB Ethernet adapter and AtmoCONTROL software licences. For qualification and maintenance, we arrange calibration, IQ/OQ/PQ and maintenance services. For individual requirements, we will advise you personally.

The Memmert Peltier-cooled incubator IPP1060eco has an interior volume of 1,060 litres whilst being the same width and height as the smaller IPP750eco; however, the housing is 250 mm deeper. Heating and cooling are provided in the setting temperature range of 0 to +70 °C via a Peltier element integrated in the rear wall, without a compressor or refrigerant. The ControlCOCKPIT SingleDISPLAY shows all values on a TFT colour graphic display and regulates via a digital PID microprocessor controller.Spacious interior, door and load capacityThe IPP1060eco also features inner glass doors behind the fully insulated stainless steel doors with 2-point locking (compression door lock). Two electropolished stainless steel grid shelves are fitted as standard, with space for up to 14 shelves in total. The total load capacity is 200 kilograms; however, the load per shelf is 20 kilograms, which is lower than that of the IPP750eco at 30 kilograms per shelf. Therefore, those carrying heavier individual loads per shelf will benefit from the smaller model. Reinforced grid shelves with a load capacity of up to 60 kilograms are available as an option. The net weight is 248 kilograms; the unit is mounted on castors and can be moved and locked in place.Control and process reliabilityA Pt100 sensor of DIN class A measures using 4-wire technology with a setting accuracy of 0.1 °C. SetpointWAIT only starts the process time once the setpoint temperature has been reached; the digital countdown timer covers a range from 1 minute to 99 days. Electronic temperature monitoring and the mechanical temperature limiter TB provide additional safeguards, whilst a self-diagnostic system assists with fault-finding. The data logger stores the program sequence even in the event of a power failure and can be read out via Ethernet. In addition to CE marking, the device also carries EAC marking; the user interface is available in nine languages.The switch from 750 to 1,060 litresAnyone who regularly reaches the capacity limit of the IPP750eco, but does not require heavier individual loads per shelf, will gain a good 40 % more volume with the IPP1060eco, which has the same 1,224 mm width as the IPP750eco and a depth of 1,005 mm instead of 755 mm. If that is still not enough, the IPP1400eco follows in the series, featuring a double-leaf door and four standard shelves instead of two. The TwinDISPLAY variant with redundant sensor technology is also available as a 1,060-litre model.Typical applicationsWith a capacity of 1,060 litres, the IPP1060eco covers the core applications of the series for larger sample batches:Microbiological examinations and germ count determination with higher sample throughputCultivation of samples at temperatures above and below room temperatureForced ageing tests for beer stabilityShelf-life tests on dairy productsTechnical detailsInterior volume1,060 lInternal dimensions (W×H×D)1,040 × 1,200 × 850 mm (depth reduced by 32 mm due to fan/Peltier element)External dimensions (W×H×D)1,224 × 1,720 × 1,005 mm (depth plus 56 mm for the door handle and 111 mm for the Peltier element)Setting temperature range0 to +70 °CWorking temperature range (without light)0 °C (at least 20 °C below room temperature) to +70 °CSetting accuracy0.1 °CTemperature sensor1× Pt100 DIN class A, 4-wire measurementCooling/heating principlePeltier (Advanced Peltier Technology), integrated into the rear panel, compressor-freeVentilationForced circulation of internal air via Peltier recirculation fanControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller with TFT colour graphic displayDoorInternal glass doors, fully insulated stainless steel doors with 2-point lockingMarkingCE, EACShelves as standard/max.2 / 14Max. load200 kg total / 20 kg per shelfHousingFully galvanised sheet steel rear panelAmbient conditions+16 to +40 °C, max. 70 % rh non-condensing, max. 2,000 m above sea levelVoltage/power230 V or 115 V, 50/60 Hz, approx. 1,300 WNet weight/gross weight248 kg / 327 kg (carton)Other sizes in the seriesThe IPP-eco series offers a choice of seven chamber sizes ranging from 108 to 2,140 litres, all featuring SingleDISPLAY and the same setting temperature range of 0 to +70 °C:ModelInternal volumeSetting temperatureDisplayIPP110eco108 l0 to +70 °CSingleDISPLAYIPP260eco256 l0 to +70 °CSingleDISPLAYIPP410eco384 l0 to +70 °CSingleDISPLAYIPP750eco749 l0 to +70 °CSingleDISPLAYIPP1060eco (this page)1,060 l0 to +70 °CSingleDISPLAYIPP1400eco1,360 l0 to +70 °CSingleDISPLAYIPP2200eco2,140 l0 to +70 °CSingleDISPLAYThe IPP-eco series is also available with TwinDISPLAY as the IPP-ecoplus. The equivalent model with a capacity of 1,060 litres is the IPP1060ecoplus, featuring two displays and two Pt100 sensors for mutual monitoring.Scope of delivery1× Memmert Peltier-cooled incubator IPP1060eco (basic unit)Inner glass doors, fully insulated stainless steel doors with 2-point locking2× stainless steel grid shelf, electropolished1× Factory calibration certificate (calibration at +10/+25/+40 °C)Regulatory informationThis appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on the return of old appliances can be found on our Environment and Disposal page.Individual requirements and procurement serviceFurther options are available for the IPP-eco series, such as reinforced stainless steel grid shelves up to 60 kilograms, an interior socket, lateral cable feed-throughs, a 4-20 mA current interface, a lockable door or a potential-free alarm contact. Calibrations at the factory, on site or according to DAkkS, IQ/OQ/PQ qualifications and maintenance contracts can also be ordered. We are happy to receive enquiries regarding bespoke configurations or spare parts.

The Memmert Peltier-cooled incubator IPP1060ecoplus offers 1,060 litres of internal capacity whilst having the same external width and height as the IPP750ecoplus; the additional capacity is due to the greater internal depth of 850 mm compared with 600 mm. It is designed for large-scale cultivation below room temperature, adjustable between 0 and +70 °C, and, at 1,720 mm in external height, remains lower than the IPP1400ecoplus, which stands at 1,913 mm. As with the IPP750ecoplus, protection is provided by an electronic temperature monitoring system with a mechanical TB limiter; the TwinDISPLAY and the dual Pt100 sensors remain unchanged.Control and safetyTwo Pt100 sensors of DIN class A quality monitor each other and automatically take over the function of the other in the event of a failure. Temperature monitoring is carried out electronically, supplemented by the mechanical temperature limiter TB. A self-diagnostic system aids fault-finding, and the process time can be started via the SetpointWAIT function only once the setpoint temperature has been reached, which ensures comparable start conditions for larger batches.Door and installationThe fully insulated stainless steel doors with a 2-point locking mechanism feature internal glass doors, through which the interior can be viewed whilst the outer doors are open. The unit is mounted on castors that can be moved and locked in place; when installing, a clearance of at least 15 cm must be maintained at the rear from the wall, 5 cm at the sides and 20 cm from the ceiling. Up to 14 shelves are available inside the chamber; two electropolished stainless steel grid shelves are fitted as standard, with a total load capacity of 200 kilograms, or 20 kilograms per shelf.Selection guideIf the capacity of the IPP750ecoplus is no longer sufficient and there is an additional 250 mm of depth available in the room, the IPP1060ecoplus is the logical upgrade. If more shelves are required, the IPP1400ecoplus is the closer fit, offering up to 28 shelves (instead of 14), a capacity of 1,360 litres, and doors with a glass panel and heated inner glass panes.Typical applicationsThe IPP1060ecoplus is designed for cultivation below room temperature, with a temperature range of 0 to +70 °C and a setting accuracy of 0.1 °C:Incubation of samples and cultures at temperatures at least 20 °C below room temperatureIncubation of larger quantities on up to 14 shelves with an internal depth of 850 mmTime-controlled temperature programmes with SetpointWAIT and a timer of up to 99 days, programmed via AtmoCONTROLProcesses requiring validation, supported by IQ/OQ documents that can be ordered and the AtmoCONTROL FDA licence for 21 CFR Part 11Technical detailsInternal volume1,060 lInternal dimensions (W×H×D)1,040 × 1,200 × 850 mm (depth minus 32 mm for fan)External dimensions (W×H×D)1,224 × 1,720 × 1,005 mmTemperature setting range0 to +70 °COperating temperature range (without lighting)at least 20 °C below room temperature to +70 °CSetting accuracy0.1 °CSensors2× Pt100 DIN Class A, 4-wire measurement, mutual monitoring with automatic function takeoverCooling/heating principlePeltier element in the rear panel, no refrigerant, no compressorVentilationForced circulation of internal air via a Peltier recirculation fanControlTwinDISPLAY, 2× TFT colour graphic displaysSafety functionAdjustable electronic temperature monitoring, mechanical temperature limiter TBDoorFully insulated stainless steel doors with 2-point locking, internal glass doorsInstallationMobile and lockable, on castorsMax. load200 kg in total / 20 kg per shelfMax. number of shelves14 (2 grid shelves included in the scope of delivery)InterfacesEthernet + USB, programming via AtmoCONTROLVoltage/Power230 V or 115 V, 50/60 Hz, approx. 1,300 WPackaging dimensions1,370 × 1,970 × 1,300 mmNet weight/Gross weightapprox. 248 kg / approx. 327 kgOther sizes in the seriesThe IPP-ecoplus series comprises seven chamber sizes, all featuring TwinDISPLAY and the same temperature setting range from 0 to +70 °C.ModelInternal volumeSet temperatureDisplayIPP110ecoplus108 l0 to +70 °CTwinDISPLAYIPP260ecoplus256 l0 to +70 °CTwinDISPLAYIPP410ecoplus384 l0 to +70 °CTwinDISPLAYIPP750ecoplus749 l0 to +70 °CTwinDISPLAYIPP1060ecoplus (this page)1,060 l0 to +70 °CTwinDISPLAYIPP1400ecoplus1,360 l0 to +70 °CTwinDISPLAYIPP2200ecoplus2,140 l0 to +70 °CTwinDISPLAYThe same chamber size is also available in the SingleDISPLAY range as the IPP1060eco, without TwinDISPLAY redundancy and without the TwinDISPLAY-exclusive options.Scope of delivery1× Memmert Peltier-cooled incubator IPP1060ecoplus (base unit)2× stainless steel grid shelves, electropolishedFully insulated stainless steel doors with 2-point locking and internal glass doors1× factory calibration certificate (calibration at +10/+25/+40 °C)Regulatory informationThis appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on the return of old appliances can be found on our Environment and Disposal page.Individual requirements and procurement serviceIn addition to extra stainless steel grid shelves and drip trays, a lockable door, a programmable door lock with door-open detection and calibration services, including DAkkS calibration at the Memmert factory, can be ordered. Our procurement service can advise you on options and maintenance contracts.

With 1,060 litres of interior, the Memmert constant climate chamber HPP1060eco stands in the laboratory as a mobile floor-standing unit. It is the largest chamber of the HPPeco series that can still be set up to 90 % rh. Temperature control is by a Peltier heating/cooling system in the rear wall, so without compressor and without refrigerant. Humidification is by a hot steam generator, and dehumidification via a cold trap in Peltier technology. The external dimensions are 1,224 x 1,720 x 1,005 mm (W x H x D), and control is via the ControlCOCKPIT TwinDISPLAY.Peltier technology and water supplyThe Peltier element works on the heat pump principle and sits in the rear wall. To the unit depth are added 111 mm for the Peltier element and 56 mm for the door handle. For humidity, a self-priming pump draws distilled water from an external container, and a water canister with connection hose is supplied with the chamber. Anyone who wants to connect the chamber to the domestic water supply selects the central water supply with filter cartridges (ZWVR6) or without filter cartridges (ZWVR7). With ZWVR7, only demineralised, fully deionised water with a conductivity of 5 to 10 μS/cm and a pH value between 5 and 7 may be used.Temperature and humidity working togetherThe setting temperature range depends on whether humidification is used. Without humidity, 0 to +70 °C can be set, and with humidity +5 to +70 °C. The working temperature range is, without humidity, 0 °C (min. 20 °C below room temperature) to +70 °C, and with humidity +5 °C (min. 20 °C below room temperature) to +70 °C. Humidity is settable from 10 to 90 % rh, and the setting accuracy is 0.5 % rh for humidity and 0.1 °C for temperature.Loading, dimensions and installationThe stainless steel interior measures 1,040 x 1,200 x 850 mm (W x H x D), less 32 mm depth for the fan (Peltier). Up to 14 shelves fit, and two electropolished stainless steel grid shelves are part of the basic equipment. 200 kg are permitted for the whole unit and 60 kg per shelf. The chamber weighs about 251 kg net, stands mobile and lockable on castors, and has a fully galvanised sheet steel rear wall, while the housing outside is made of textured stainless steel. It is installed at +16 to +40 °C ambient temperature and a maximum of 70 % rel. humidity, non-condensing, up to 2,000 m above sea level. At least 15 cm distance to the rear wall is to be observed, 20 cm to the ceiling, 5 cm at the sides. It is transported upright only.Control, programs and interfacesThe TwinDISPLAY consists of two high-resolution TFT colour graphic displays and an adaptive digital PID microprocessor controller. Two Pt100 sensors of DIN class A measure in 4-wire technology, monitor each other and take over the function of the other in the event of a fault. HeatBALANCE shifts the heating power between the upper and lower heating group by -50 to +50 %, and SetpointWAIT starts the process time only when the setpoint temperature has been reached. The countdown clock runs from 1 minute to 99 days and shows a target time. Three freely selectable values each can be calibrated for temperature and humidity. Programs are created, managed and transferred via Ethernet LAN or USB with the AtmoCONTROL software, and the program sequence remains saved in the event of a power failure. The user interface is available in nine languages.Monitoring and alarmAn adjustable temperature monitor of protection class 3.3 is part of the standard equipment. AutoSAFETY follows the setpoint at a freely selectable interval, triggers an alarm on deviation, switches the heating function off when exceeded and the cooling function when fallen below. A self-diagnosis system checks temperature and humidity control, and the alarm appears visually and acoustically.Selection guide: 1,060 litres or another sizeThe HPP1060eco fits if humidity up to 90 % rh is needed and the chamber is to run with humidity from as low as +5 °C. The smaller HPP750eco with 749 l has the same temperature and humidity ranges and likewise up to 14 shelves, while the HPP1060eco has more interior and carries 60 kg instead of 30 kg per shelf. The larger HPP1400eco (1,360 l) has up to 28 shelves with 30 kg each, but with humidity only +15 to +60 °C and 10 to 80 % rh apply. If samples are to be temperature-controlled below 0 °C, the Peltier chamber reaches its limit. The ICH750 climate chamber with 749 l and compressor cooling sets -10 to +60 °C, but is not suitable for permanent storage at sub-zero temperatures. It controls humidity from 10 to 80 % rh, and with humidity it works from +10 to +60 °C.Typical applicationsThe HPPeco series is intended for these applications, among others:Stability studies according to ICH guidelines (Q1A)Stability testing of new medicines in pharmaceuticals and medicineStability testing of solid cosmeticsColour fastness testing and packaging design tests in the packaging industryEnvironmental testing, materials testing and material testing in industryTechnical detailsSetting temperature range without humidity0 to +70 °CSetting temperature range with humidity+5 to +70 °CWorking temperature range without humidity0 °C (min. 20 °C below room temperature) to +70 °CWorking temperature range with humidity+5 °C (min. 20 °C below room temperature) to +70 °CTemperature setting accuracy0.1 °CHumidity range (setting range)10 to 90 % rhHumidity setting accuracy0.5 % rhHumidification and dehumidificationHot steam generator and cold trap in Peltier technologyHeating/cooling systemPeltier in the rear wall (heat pump principle), without compressorTemperature sensor2x Pt100, DIN class A, 4-wire measurement, mutual monitoringControlControlCOCKPIT TwinDISPLAY, adaptive PID microprocessor controller, 2x TFT colour graphic displayInternal volume1,060 lInternal dimensions (W x H x D)1,040 x 1,200 x 850 mm (depth less 32 mm for fan, Peltier)External dimensions (W x H x D)1,224 x 1,720 x 1,005 mm (depth plus 56 mm door handle and 111 mm Peltier element)Shelves maximum / in scope of delivery14 / 2Max. load unit / per shelf200 kg / 60 kgInstallationmobile and lockable, on castorsConnection230 V, 50/60 Hz, approx. 1,400 WPermissible environment+16 to +40 °C, max. 70 % non-condensing, max. 2,000 m above sea levelWeight net / gross (carton)approx. 251 kg / approx. 331 kgMarkingsCE, UL (c-UL-us Listed), VDE GSOther sizes in the seriesThe HPPeco series comprises seven sizes from 108 to 2,140 litres, all with TwinDISPLAY:ModelInternal volumeSetting temperature without humidityHumidity rangeHPP110eco108 l0 to +70 °C10 to 90 % rhHPP260eco256 l0 to +70 °C10 to 90 % rhHPP410eco384 l0 to +70 °C10 to 90 % rhHPP750eco749 l0 to +70 °C10 to 90 % rhHPP1060eco (this page)1,060 l0 to +70 °C10 to 90 % rhHPP1400eco1,360 l0 to +70 °C10 to 80 % rhHPP2200eco2,140 l0 to +70 °C10 to 80 % rhScope of delivery1x Memmert constant climate chamber HPP1060ecoFactory calibration certificate (+25 °C / 60 % rh, +40 °C / 75 % rh)Fully insulated stainless steel doors with 2-point locking (compression door lock)Humidity-tight silicone feedthrough, inner diameter 18 mm, can be closed with silicone plug, side wall centre left2x stainless steel grid shelf, electropolishedWater canister with connection hoseRegulatory informationThe unit is an electrical device within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Notes on returning old appliances can be found on our page Environment and disposal.Individual requirements and procurement serviceAvailable as factory options for the HPP1060eco are, among others, a temperature throttle to +60 °C, an interior socket (only with this throttle to max. +60 °C), lateral and individually positionable feedthroughs with 23 mm or 40 mm inner diameter, a 4-20 mA current interface, a lockable door, a potential-free contact for fault messages, a process-dependent programmable door lock, a door-open detection and MobileALERT by SMS. Accessories include additional stainless steel grid shelves, perforated trays and drip trays, a USB-Ethernet adapter, an Ethernet cable, the USB user ID stick, an FDA basic licence for AtmoCONTROL FDA, an external measuring device for temperature and humidity, and built-in frames. Calibrations at the factory or DAkkS (accredited), IQ/OQ documents, on-site qualifications and maintenance contracts can be requested in addition. For individual requirements, we will advise you personally.