Skip to main content Skip to search Skip to main navigation

Memmert universal oven UF1060plus, 1,060 l, +20 to +300 °C, TwinDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert universal oven UF1060plus, 1,060 l, +20 to +300 °C, TwinDISPLAY"

With 1,060 litres, the Memmert universal oven UF1060plus is the largest model of the UF-plus series and stands on castors that can be moved and locked in the laboratory or in production. It accommodates up to 14 shelves with up to 60 kg each and is connected via three-phase current with approx. 7,000 W.

Mobile housing for the largest chamber of the series

The housing of the UF1060plus can be moved and locked and stands on castors, and the interior measures 1,040 x 1,200 x 850 mm. Two stainless steel grid shelves are part of the standard equipment, expandable to up to 14 shelves with a maximum of 60 kg each, and a total load of 300 kg is permitted in all. The unit may only be transported in an upright position.

Control with HeatBALANCE

Even with 1,060 litres of chamber volume, the temperature measurement remains redundant: two DIN class A Pt100 sensors in 4-wire technology monitor each other, and control is via the ControlCOCKPIT TwinDISPLAY with two TFT colour graphic displays. With HeatBALANCE, the heating power between the upper and lower heating group can be shifted by -50 to +50 %. Programming is via Ethernet or USB with AtmoCONTROL.

Temperature monitoring and safety

The mechanical temperature limitation of protection class 1 according to DIN 12880 takes effect at about 20 °C above the maximum oven temperature. In addition, an adjustable temperature monitor (protection class 3.1) or an adjustable temperature limiter (protection class 2) can be selected on the display, and AutoSAFETY automatically follows the setpoint at a freely selectable distance, triggers a visual and audible alarm when the temperature is exceeded or fallen short of and switches off the heating when it is exceeded. A permissible ambient temperature of +5 °C to +40 °C applies at a maximum of 80 % relative humidity.

Guide to choosing the right size

The UF1060plus is the largest model of the series, and there is no larger size. If less chamber volume is needed, the UF750plus with 749 litres is the next smaller size, see the size table below.

Typical applications

With 1,060 litres of internal volume, the UF1060plus is suitable for drying, heating, tempering, ageing, baking, testing and curing in research, science, industry and quality assurance.

  • Drying and tempering large batches with many shelves at the same time
  • Heating and curing larger components in industry
  • Curing and baking large batches with redundant temperature measurement
  • Ageing and testing large batches in quality assurance

Technical details

Setting temperature range+20 to +300 °C
Working temperature rangemin. 10 °C above room temperature to +300 °C
Temperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Temperature sensor2x Pt100, DIN class A, 4-wire measurement, redundant
Internal volume1,060 l
Internal dimensions (W x H x D)1,040 x 1,200 x 850 mm (depth minus 39 mm for the fan)
External dimensions of housing (W x H x D)1,224 x 1,720 x 1,035 mm
Net weightapprox. 252 kg
Connected load400 V and 3 x 230 V without neutral conductor, 50/60 Hz, approx. 7,000 W
Shelves max.14
Shelves included in scope of delivery2
Max. load of unit300 kg
Max. load per shelf60 kg
Interiordeep-drawn ribbed, 4-sided all-round heating
Installation of housingmobile and lockable, on castors
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic display
Additional functionsHeatBALANCE, AutoSAFETY, visual and audible alarm
Permissible ambient temperature+5 °C to +40 °C
Permissible humiditymax. 80 % rel., non-condensing
Max. installation altitude2,000 m
MarkingsCE, VDE, GS, UL, EAC

Other sizes in the series

From the 32-litre model to the 1,060-litre version shown here, the UF-plus series covers nine size steps:

ModelInternal volumeSetting temperatureDisplay
UF30plus32 l+20 to +300 °CTwinDISPLAY
UF55plus53 l+20 to +300 °CTwinDISPLAY
UF75plus74 l+20 to +300 °CTwinDISPLAY
UF110plus108 l+20 to +300 °CTwinDISPLAY
UF160plus161 l+20 to +300 °CTwinDISPLAY
UF260plus256 l+20 to +300 °CTwinDISPLAY
UF450plus449 l+20 to +300 °CTwinDISPLAY
UF750plus749 l+20 to +300 °CTwinDISPLAY
UF1060plus (this page)1,060 l+20 to +300 °CTwinDISPLAY

The same volume is also available in the UF series without the second sensor: UF1060.

Scope of delivery

  • 1x Memmert universal oven UF1060plus
  • Factory calibration certificate (calibration at +160 °C)
  • Fully insulated stainless steel doors with 2-point locking (compression door lock)
  • 2x stainless steel grid shelf, electropolished

Regulatory information

The device is an electrical device within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29742) or without air slots (B29743). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

For the UF1060plus, a full-view glass door, interior lighting and socket, a programmable door lock and door-open detection, among other things, can be ordered from the factory. Suitable accessories include additional shelves and perforated trays, drip trays, a USB Ethernet adapter and AtmoCONTROL software licences. For qualification and maintenance, we arrange calibration, IQ/OQ/PQ and maintenance services. For individual requirements, we will advise you personally.

Certification marks: GS (VDE)
Volume: 1060 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert reinforced stainless steel grid B32550 for size 1060
Manufacturer number: B32550

The reinforced stainless steel grid B32550 is an electropolished shelf for 5 Memmert models in size 1060. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UF1060 or IPP1060eco.All 5 models have 2 grids as standard and can hold up to 14 grids. According to Memmert, the load per shelf is 60 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Curing and baking of large batches with redundant temperature measurement, for example in the UF1060plusIncubation of larger quantities on up to 14 shelves, for example in the IPP1060ecoPlusStability studies according to ICH guidelines (Q1A), for example in the HPP1060ecoSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UF1060214601,060UF1060plus214601,060IPP1060eco214601,060IPP1060ecoPlus214601,060HPP1060eco214601,060The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert60 kgScope of delivery1 reinforced stainless steel grid, electropolished (B32550)Individual requirements & procurement serviceFor grids and perforated trays without reinforcement, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €595.98
memmert rohrverlaengerung gerade
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29718

The straight slip-on pipe extension B29718 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The angled version is also available (B29719). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 straight slip-on pipe extensionIndividual requirements & procurement serviceFor the angled version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €41.28
memmert rohrverlaengerung gewinkelt
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29719

The angled slip-on pipe extension B29719 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The straight version is also available (B29718). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material samples in series, for example in the UN260Testing and curing of larger components in quality assurance, for example in the UF750Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 angled slip-on pipe extensionIndividual requirements & procurement serviceFor the straight version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €108.36
Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid B41251 for size 1060
Manufacturer number: B41251

The B41251 stainless steel grid is electropolished and intended for Memmert U and Um universal ovens, IPPeco Peltier cooling incubators and HPPeco constant climate chambers in size 1060. It is a shelf for the interior of these units. The size corresponds to the number in the unit name, for example UF1060 or IPP1060eco.When loading, the information on the maximum load per shelf and per unit in the unit’s data sheet applies. For the models UF1060, UF1060plus, IPP1060eco, IPP1060ecoPlus and HPP1060eco, 2 grids are fitted as standard and the interior holds up to 14 shelves. If you want to use more levels, you need further grids. The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying and tempering of large batches with many shelves in use at the same time, for example in the UF1060plusIncubation of larger quantities on up to 14 shelves, for example in the IPP1060ecoPlusStability studies according to ICH guidelines (Q1A), for example in the HPP1060ecoSuitable forModelSizeInterior volume (l)UF106010601,060UF1060plus10601,060IPP1060eco10601,060IPP1060ecoPlus10601,060HPP1060eco10601,060UF1060m10601,060UF1060mplus10601,060Technical detailsMaterialStainless steelSurfaceelectropolishedScope of delivery1 stainless steel grid, electropolishedIndividual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €306.16
Stainless steel perforated shelf, illustration
Memmert reinforced stainless steel perforated tray B68523 for size 1060
Manufacturer number: B68523

According to Memmert, the reinforced stainless steel perforated tray B68523 can bear up to 60 kg and is intended for Memmert U and Um universal ovens, IPPeco Peltier cooling incubators and HPPeco constant climate chambers in size 1060. It is supplied with guide rails and fixing screws. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UF1060 or IPP1060eco. The image is for illustration only.The perforated tray is used together with the K1 interior modification, in which support rails are mounted in the working chamber. For size 1060, these support rails are fitted in the unit as standard, so nothing additional needs to be ordered. Please note the maximum load per unit.Typical applicationsTypical uses in the compatible units:Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Curing and baking of large batches with redundant temperature measurement, for example in the UF1060plusIncubation of larger quantities on up to 14 shelves, for example in the IPP1060ecoPlusStability studies according to ICH guidelines (Q1A), for example in the HPP1060ecoSuitable forModelSizeInterior volume (l)UF106010601,060UF1060plus10601,060IPP1060eco10601,060IPP1060ecoPlus10601,060HPP1060eco10601,060UF1060m10601,060UF1060mplus10601,060Technical detailsMaterialStainless steelLoad per shelf according to Memmertup to 60 kgScope of delivery1 reinforced stainless steel perforated tray with guide rails and fixing screwsIndividual requirements & procurement serviceFor grids, perforated trays without reinforcement and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €989.00
memmert boden abtropfschale
Memmert stainless steel base drip tray B29769 for size 1060
Manufacturer number: B29769

B29769 is a stainless steel base drip tray with a 15 mm rim for Memmert U and Um universal ovens, IPPeco Peltier cooling incubators and HPPeco constant climate chambers in size 1060. It collects dripping liquid. According to Memmert, the maximum load is 8 kg per base drip tray. The size corresponds to the number in the unit name, for example UF1060 or IPP1060eco.Memmert points out that it can impair the spatial temperature distribution. The slide-in drip tray for the same unit size is also available (B32599). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Forcing tests for beer stability, for example in the IPP1060ecoShelf-life tests on dairy products, for example in the IPP1060ecoSuitable forModelSizeInterior volume (l)UF106010601,060UF1060plus10601,060IPP1060eco10601,060IPP1060ecoPlus10601,060HPP1060eco10601,060UF1060m10601,060UF1060mplus10601,060Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert8 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €377.54
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B32599 for size 1060
Manufacturer number: B32599

The B32599 slide-in drip tray is made of stainless steel and has a 15 mm rim. It is intended for Memmert U and Um universal ovens, IPPeco Peltier cooling incubators and HPPeco constant climate chambers in size 1060 and collects dripping liquid. According to Memmert, the maximum load per slide-in drip tray for this size is 8 kg. The size corresponds to the number in the unit name, for example UF1060 or IPP1060eco.In addition, according to Memmert, it can impair the spatial temperature distribution. The base drip tray for the same unit size is also available (B29769). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Forcing tests for beer stability, for example in the IPP1060ecoShelf-life tests on dairy products, for example in the IPP1060ecoSuitable forModelSizeInterior volume (l)UF106010601,060UF1060plus10601,060IPP1060eco10601,060IPP1060ecoPlus10601,060HPP1060eco10601,060UF1060m10601,060UF1060mplus10601,060Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert8 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €372.38