Accessories
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
The straight slip-on pipe extension B29718 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The angled version is also available (B29719). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 straight slip-on pipe extensionIndividual requirements & procurement serviceFor the angled version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert tubular steel base frame B63506 for vacuum drying oven VO49
B63506 is a tubular steel base frame, painted black, for the VO49 vacuum drying oven. It is intended for the stacking unit consisting of vacuum drying oven and pump module.Memmert states a total height of 1,650 mm for this stacking unit.Typical applicationsThe stacking unit consisting of the VO49 and a pump module is placed on the base frame. Typical uses of the VO49:Vacuum drying of foodstuffs and cosmeticsDrying of granules and powders in vacuum cyclesDrying of printed circuit boards and electronic componentsSuitable forModelSizeInterior volume (l)VO494949Technical detailsMaterialTubular steelSurfacepainted blackTotal height of the stacking unit according to Memmert1,650 mmScope of delivery1 tubular steel base frame, painted blackIndividual requirements & procurement serviceFor further accessories for the VO49 vacuum drying oven and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel perforated tray E35158 for sizes 180 and 240
This stainless steel perforated tray (E35158) is intended for Memmert CO₂ incubators ICO and HCP humidity chambers in sizes 180 and 240. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example ICO180 or HCP240. The image is for illustration only.According to Memmert, a maximum of 15 kg is permitted per shelf. If you want to load several shelves, also check the maximum load per unit in the data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Incubation of larger sample quantities or several test series at the same time, for example in the ICO180High sample throughput and several parallel test series in a single unit, for example in the ICO240Environmental tests and environmental simulations in the HCP240 humidity chamberSuitable forModelSizeInterior volume (l)ICO180180177ICO240240243HCP240240241Technical detailsMaterialStainless steelLoad per shelf according to Memmert15 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor further shelves for the ICO CO₂ incubators and HCP humidity chambers, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
The angled slip-on pipe extension B29719 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The straight version is also available (B29718). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material samples in series, for example in the UN260Testing and curing of larger components in quality assurance, for example in the UF750Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 angled slip-on pipe extensionIndividual requirements & procurement serviceFor the straight version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel grid E43118 for size 240
The E43118 stainless steel grid is an electropolished shelf for 1 Memmert model in size 240. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, here HCP240.The one model is the HCP240 humidity chamber, which has 2 perforated shelves as standard. The maximum number is 12 grids; according to Memmert, the load per shelf is 15 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses of the HCP240 humidity chamber:Environmental testsEnvironmental simulationsAccelerated lifetime testsSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)HCP2402 (perforated shelf)1215241The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert15 kgScope of delivery1 stainless steel grid, electropolished (E43118)Individual requirements & procurement serviceFor further grids or perforated trays for the HCP240 humidity chamber, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel perforated tray E35160 for size 50
The E35160 stainless steel perforated tray is intended for Memmert CO₂ incubators ICO and HCP humidity chambers in size 50. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example ICO50 or HCP50. The image is for illustration only.According to Memmert, the maximum load per shelf for this size is 15 kg. In addition, the maximum load per unit limits the loading; it is stated in the unit’s data sheet.Typical applicationsTypical uses in the compatible units:Routine incubation of cell cultures at individual workstations or in smaller laboratories, for example in the ICO50Environmental tests and environmental simulations in the HCP50 humidity chamberSuitable forModelSizeInterior volume (l)ICO505056HCP505056Technical detailsMaterialStainless steelLoad per shelf according to Memmert15 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor further shelves for the ICO CO₂ incubators and HCP humidity chambers, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel grid B41251 for size 1060
The B41251 stainless steel grid is electropolished and intended for Memmert U and Um universal ovens, IPPeco Peltier cooling incubators and HPPeco constant climate chambers in size 1060. It is a shelf for the interior of these units. The size corresponds to the number in the unit name, for example UF1060 or IPP1060eco.When loading, the information on the maximum load per shelf and per unit in the unit’s data sheet applies. For the models UF1060, UF1060plus, IPP1060eco, IPP1060ecoPlus and HPP1060eco, 2 grids are fitted as standard and the interior holds up to 14 shelves. If you want to use more levels, you need further grids. The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying and tempering of large batches with many shelves in use at the same time, for example in the UF1060plusIncubation of larger quantities on up to 14 shelves, for example in the IPP1060ecoPlusStability studies according to ICH guidelines (Q1A), for example in the HPP1060ecoSuitable forModelSizeInterior volume (l)UF106010601,060UF1060plus10601,060IPP1060eco10601,060IPP1060ecoPlus10601,060HPP1060eco10601,060UF1060m10601,060UF1060mplus10601,060Technical detailsMaterialStainless steelSurfaceelectropolishedScope of delivery1 stainless steel grid, electropolishedIndividual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.
Memmert stainless steel base drip tray B04362 for sizes 450 and 750
The stainless steel base drip tray B04362 is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 450 and 750. It has a 15 mm rim, collects dripping liquid and, according to Memmert, can bear a maximum of 8 kg. The size corresponds to the number in the unit name, for example UF450 or UN450.According to Memmert, it can impair the spatial temperature distribution. According to Memmert, it cannot be used in conjunction with option K1, the interior modification with support rails for reinforced grids and perforated trays. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02075). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying large quantities of laboratory glassware and sample vessels in multi-shift operation, for example in the UF750Forcing tests for beer stability, for example in the IPP750ecoShelf-life tests on dairy products, for example in the IPP750ecoSuitable forModelSizeInterior volume (l)UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749IN450plus450449IN450450449IF750plus750749IF450plus450449IN750750749IF750750749IF450450449IN750plus750749IPP750eco750749IPP750ecoPlus750749HPP750eco750749ICH750750749ICP450450449ICP750750749IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF450TS450449UF750TS750749Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert8 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert levelling base frame B29745, height 600 mm, for size 30
The levelling base frame B29745 has a height of 600 mm and is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in size 30. The size corresponds to the number in the unit name, for example UF30 or UN30.A flat base frame with a height of 130 mm is also available (B33657). The mobile version with a height of 660 mm is also available (B29746). The image is for illustration only.Typical applicationsUnits of size 30 are placed on the base frame. Typical uses of these units:Incubating culture media and cultures in routine microbiology, for example in the IN30 incubatorDrying and heating in industrial quality assurance, for example in the UN30plusMicrobiological cooled incubation in the IPP30 Peltier cooling incubatorSample preparation in pathology and histology in the UN30pa paraffin ovenWhen installing, the clearances of the unit apply; for the UN30 universal oven, at least 15 cm wall clearance, 20 cm ceiling clearance and 5 cm side clearance.Suitable forModelSizeInterior volume (l)UF303032UN303032UF30plus3032UN30plus3032IF30plus3032IN30plus3032IF303032IN303032UN30pa3032IPP303032IPP30plus3032IN30m3032IN30mplus3032IF30m3032IF30mplus3032UN30m3032UN30mplus3032UF30m3032UF30mplus3032Technical detailsHeight600 mmScope of delivery1 levelling base frame, height 600 mmIndividual requirements & procurement serviceFor the flat and the mobile version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert reinforced stainless steel grid E29767 for sizes 110 and 160
The reinforced stainless steel grid E29767 is available for Memmert units in the U, Um, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160. It is electropolished and, according to Memmert, can bear up to 60 kg; for the standard grids in these sizes it is 20 kg per shelf. The grid is a shelf level in the interior. The size corresponds to the number in the unit name, for example IF110 or UF110.Please note the maximum load per unit, as it limits the total load of all shelves. The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Tempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Material tests in industrial manufacturing, for example in the UF160Suitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmertup to 60 kgScope of delivery1 reinforced stainless steel grid, electropolishedIndividual requirements & procurement serviceFor standard grids, perforated trays and drip trays of the same size, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.
Memmert stainless steel 1.4404 thermal shelf B00733 for vacuum drying oven VO29
The thermal shelf B00733 is made of stainless steel, material 1.4404 (ASTM 316 L), and intended for particularly corrosive materials. It serves as an additional heated shelf in the interior. It is intended for the VO29 vacuum drying oven and, according to Memmert, can bear a maximum of 20 kg per thermal shelf.It has integrated large-area heating with on-site sensors (Pt100, 4-wire measurement) and a shelf-specific overtemperature protection (Multi-Level-Overtemperature-Control). According to Memmert, a calibration certificate is only possible when ordering a new unit. The anodised aluminium thermal shelf is also available (B00741). The image is for illustration only.Typical applicationsTypical uses of the VO29 vacuum drying oven:Drying of granules and powders in vacuum cyclesDrying of printed circuit boards and electronic componentsVacuum drying of watches, books and injection mouldsSuitable forModelSizeInterior volume (l)VO292929Technical detailsMaterialStainless steel, material 1.4404 (ASTM 316 L)Heatingintegrated large-area heatingSensorsPt100, 4-wire measurementOvertemperature protectionshelf-specific, Multi-Level-Overtemperature-ControlMaximum load according to Memmert20 kg per thermal shelfScope of delivery1 thermal shelf made of stainless steel, material 1.4404, with integrated large-area heatingIndividual requirements & procurement serviceFor the aluminium thermal shelf, for further accessories for the VO29 vacuum drying oven and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert aluminium thermal shelf B00744 for vacuum drying oven VO101
For the VO101 vacuum drying oven, the thermal shelf B00744 made of anodised aluminium (material 3.3547, ASTM B209) is available. It serves as an additional heated shelf in the interior. Memmert specifies a maximum load of 20 kg for one thermal shelf.It has integrated large-area heating with on-site sensors (Pt100, 4-wire measurement) and a shelf-specific overtemperature protection (Multi-Level-Overtemperature-Control). According to Memmert, a calibration certificate is only possible when ordering a new unit. For particularly corrosive materials, the thermal shelf made of stainless steel 1.4404 is also available (B00735). The image is for illustration only.Typical applicationsTypical uses of the VO101 vacuum drying oven:Vacuum drying of foodstuffs and cosmeticsDrying of printed circuit boards and electronic componentsVacuum drying of watches, books and injection mouldsSuitable forModelSizeInterior volume (l)VO101101101Technical detailsMaterialAluminium, anodised, material 3.3547 (ASTM B209)Heatingintegrated large-area heatingSensorsPt100, 4-wire measurementOvertemperature protectionshelf-specific, Multi-Level-Overtemperature-ControlMaximum load according to Memmert20 kg per thermal shelfScope of delivery1 anodised aluminium thermal shelf with integrated large-area heatingIndividual requirements & procurement serviceFor the stainless steel thermal shelf, for further accessories for the VO101 vacuum drying oven and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel perforated tray B68518 for sizes 450 and 750
B68518 is a stainless steel perforated tray for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 450 and 750. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UF450 or UN450. The image is for illustration only.Memmert specifies 30 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Large-volume drying and heat treatment batches in industry and research, for example in the UF450Incubating very large sample quantities or several batches in research and medicine, for example in the IF750Large-volume stability studies of several batches according to ICH Q1A in contract laboratories and pharmaceutical manufacturing, for example in the HPP750ecoHeat treatment of very large material batches in industrial multi-shift operation, for example in the UN750Suitable forModelSizeInterior volume (l)UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749IN450plus450449IN450450449IF750plus750749IF450plus450449IN750750749IF750750749IF450450449IN750plus750749IF750bw750749IF450bw450449IPP750eco750749IPP750ecoPlus750749HPP750eco750749ICH750750749ICP450450449ICP750750749IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF450TS450449UF750TS750749Technical detailsMaterialStainless steelLoad per shelf according to Memmert30 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
The B29768 set of levelling feet contains 4 pieces. With levelling feet, the unit can be aligned horizontally.The set is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. The table of compatible models shows which series is available in which size. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorEmbedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenParallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoSuitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574UN160pa160161IF30plus3032IN30plus3032IF303032IN303032IF160160161IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UN55pa5553UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032IPP260eco260256IPP260ecoPlus260256HPP110eco110108HPP260eco260256IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF160TS160161UF260TS260256Scope of delivery1 set of levelling feet (4 pieces)Individual requirements & procurement serviceFor base frames, further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert mobile base frame B29750, height 560 mm, for sizes 110 and 160
The mobile base frame B29750 is 560 mm high.It is intended for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. The levelling version with a height of 500 mm is also available (B29749), as is a flat base frame with a height of 130 mm (B33661). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example IF110 or UF110.Typical applicationsUnits of sizes 110 and 160 are placed on the base frame. Typical uses of these units:Tempering, ageing and baking of material specimens and material samples, for example in the UF160Incubating several sample series at the same time in research and medicine, for example in the IF110Vibration-free drying of dust- or air-sensitive materials in several batches, for example in the UN110Cooled incubation of larger sample quantities or several parallel test series below room temperature, for example in the IPP110ecoSuitable forModelSizeInterior volume (l)IF110bw110108IF110110108IN110plus110108UF110110108UN110pa110108UN160pa160161IF160160161IN160160161IF110plus110108IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161IN110110108IPP110eco110108IPP110ecoplus110108HPP110eco110108IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161Technical detailsHeight560 mmScope of delivery1 mobile base frame, height 560 mmIndividual requirements & procurement serviceFor the flat and the levelling version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert levelling base frame B33661, height 130 mm, for sizes 110 and 160
The levelling base frame B33661, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. The size corresponds to the number in the unit name, for example IF110 or UF110.The base frame B29749 with a height of 500 mm is also available for these sizes. The table of compatible models shows which series is available in which size.Typical applicationsUnits of sizes 110 and 160 are placed on the base frame. Typical uses of these units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Tempering larger batches in the pharmaceutical industry, for example in the IF160Production of microscopic specimens in the laboratory, for example in the UN160pa paraffin ovenMaterials testing in industrial quality assurance, for example in the HPP110ecoSuitable forModelSizeInterior volume (l)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 detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
The B29744 stacking kit consists of 4 pieces and is intended for stacking units of the same size. It is intended for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco, HCP and IFbw series in sizes 30, 50, 55, 75, 105 and 110. The size corresponds to the number in the unit name, for example UF30 or UN30.Separate stacking kits are also available for HCP150, HCP240 and for ICO50, 180 and 240 (B42114, B48129, B68362 and B64732). The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorIncubating several sample series at the same time in research and medicine, for example in the IF110Environmental tests and environmental simulations in the HCP105 humidity chamberSuitable forModelSizeInterior volume (l)IF110bw110108UF303032IF110110108UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574IF30plus3032IN30plus3032IF303032IN303032IF55plus5553IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553UF110plus110108UN110110108UN110plus110108IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032HPP110eco110108HCP505056HCP105105107IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108Scope of delivery1 stacking kit (4 pieces)Individual requirements & procurement serviceFor the stacking kits for HCP humidity chambers and ICO CO₂ incubators, for base frames and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel perforated tray E37418 for sizes 105 and 150
E37418 is a stainless steel perforated tray for Memmert CO₂ incubators ICO and HCP humidity chambers in sizes 105 and 150. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example ICO105 or HCP105. The image is for illustration only.Memmert specifies 15 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Parallel incubation of several culture batches in medium-sized laboratories, for example in the ICO105Environmental tests and environmental simulations in the HCP105 and HCP150 humidity chambersSuitable forModelSizeInterior volume (l)ICO105105108HCP105105107HCP150150156Technical detailsMaterialStainless steelLoad per shelf according to Memmert15 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor further shelves for the ICO CO₂ incubators and HCP humidity chambers, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel 1.4404 thermal shelf B00734 for vacuum drying oven VO49
B00734 is a thermal shelf made of stainless steel, material 1.4404 (ASTM 316 L), for the VO49 vacuum drying oven, intended for particularly corrosive materials. It serves as an additional heated shelf in the interior. According to Memmert, the maximum load per thermal shelf is 20 kg.It has integrated large-area heating with on-site sensors (Pt100, 4-wire measurement) as well as a shelf-specific overtemperature protection (Multi-Level-Overtemperature-Control). According to Memmert, a calibration certificate is only possible when ordering a new unit. The anodised aluminium thermal shelf is also available (B00743). The image is for illustration only.Typical applicationsTypical uses of the VO49 vacuum drying oven:Drying of granules and powders in vacuum cyclesDrying of printed circuit boards and electronic componentsVacuum drying of watches, books and injection mouldsSuitable forModelSizeInterior volume (l)VO494949Technical detailsMaterialStainless steel, material 1.4404 (ASTM 316 L)Heatingintegrated large-area heatingSensorsPt100, 4-wire measurementOvertemperature protectionshelf-specific, Multi-Level-Overtemperature-ControlMaximum load according to Memmert20 kg per thermal shelfScope of delivery1 thermal shelf made of stainless steel, material 1.4404, with integrated large-area heatingIndividual requirements & procurement serviceFor the aluminium thermal shelf, for further accessories for the VO49 vacuum drying oven and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert levelling base frame B29753, height 500 mm, for size 450
The levelling base frame B29753 has a height of 500 mm. It is intended for Memmert U and Um universal ovens, I and Im incubators and IFbw blanket warmers in size 450. The size corresponds to the number in the unit name, for example UF450 or UN450.In total, it fits 17 models of this size. The image is for illustration only.Typical applicationsUnits of size 450 are placed on the base frame. Typical uses of these units:Large-volume drying and heat treatment batches in industry and research, for example in the UF450Incubating large quantities of samples in research and medicine, for example in the IF450Vibration-free heat treatment of dust-sensitive materials on a large scale, for example in the UN450Suitable forModelSizeInterior volume (l)UN450plus450449UF450plus450449UF450450449UN450450449IN450plus450449IN450450449IF450plus450449IF450450449IF450bw450449IN450m450449IN450mplus450449IF450m450449IF450mplus450449UN450m450449UN450mplus450449UF450m450449UF450mplus450449Technical detailsHeight500 mmScope of delivery1 levelling base frame, height 500 mmIndividual requirements & procurement serviceFor base frames for other unit sizes and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel slide-in drip tray B29726 for sizes 260 and 410
The stainless steel slide-in drip tray B29726 is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 260 and 410. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 4 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UN260 or IF260.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B29722). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Forcing tests for beer stability, for example in the IPP410ecoShelf-life tests on dairy products, for example in the IPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF260TS260256Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert4 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert levelling base frame B33664, height 130 mm, for size 260
The levelling base frame B33664, with a height of 130 mm, is the flat version for Memmert units in the U, Um, I, Im, IPPeco, HPPeco and IFbw series in size 260. It fits 20 models of this size. The size corresponds to the number in the unit name, for example UN260 or IF260.The base frame B29751 with a height of 500 mm is also available for this size.Typical applicationsUnits of size 260 are placed on the base frame. Typical uses of these units:Curing and baking with redundant temperature measurement, for example in the UF260plusIncubating and tempering larger sample series with several shelves at the same time, for example in the IF260plusMaterial tests and quality assurance with high sample throughput, for example in the UN260Cultivation of samples and cultures down to at least 20 °C below room temperature, for example in the IPP260ecoplusSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IF260bw260256IPP260eco260256IPP260ecoPlus260256HPP260eco260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256Technical detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.
Memmert stainless steel grid E20164 for sizes 50, 55 and 75
The E20164 stainless steel grid is an electropolished shelf for Memmert cabinets in sizes 50, 55 and 75. It fits universal ovens, incubators, Peltier cooling incubators and the HCP50 humidity chamber, 37 models in total. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UF55 or UN55.The load per shelf is 20 kg for all models, only for the HCP50 it is 15 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Environmental tests and environmental simulations in the HCP50 humidity chamberSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf. The HCP50 comes with a perforated shelf as standard; the grid is optional there.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UF55142053UF55plus142053UN55142053UN55plus142053UF75262074UF75plus262074UN75262074UN75plus262074UF55m142053UF55mplus142053UN55m142053UN55mplus142053UF75m262074UF75mplus262074UN75m262074UN75mplus262074UN55pa142053UN75pa262074IF55142053IF55plus142053IN55142053IN55plus142053IF75262074IF75plus262074IN75262074IN75plus262074IF55m142053IF55mplus142053IN55m142053IN55mplus142053IF75m262074IF75mplus262074IN75m262074IN75mplus262074IPP55142053IPP55plus142053HCP501 (perforated shelf)51556The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP50Scope of delivery1 stainless steel grid, electropolished (E20164)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.
Memmert stainless steel slide-in drip tray B02072 for sizes 55 and 75
The stainless steel slide-in drip tray B02072 is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 1.5 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04358). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.