Bandelin SONOREX D 510 lid for DIGITEC DT and SUPER RK

The Bandelin SONOREX DIGITEC DT 510 H combines a 9.7-litre tank with a 400-watt heater, which can be set to temperatures between 20 and 80 °C. The inner dimensions of the bath are 300 x 240 x 150 mm; it is operated via buttons, and the display shows the setpoint and actual bath temperature.Temperature control with boiling delay protectionThe heater includes boiling delay protection and dry-run protection. The automatic safety shut-off activates 12 hours after the last button press. At 230 V, the heater’s current consumption of 2.5 A is significantly higher than that of the unheated DT 510, which is 0.7 A.Ultrasound with four vibration systemsFour vibration systems deliver a peak power of 640 watts at 35 kHz; the rated power is 160 watts. SweepTec operates fully automatically to counter standing waves in the ultrasonic field; there is also a pulse function and the DEGAS rapid degassing feature, which is activated at the start of the cleaning process. The timer runs in the following increments: 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) or in continuous operation.Tank, drain and weightThe tank (1.0 mm) and housing are made of 1.4301 stainless steel. Of the 9.7-litre total capacity, 6.6 l are used as working volume; a fill level mark is provided. The G 1/2 ball valve on the left-hand side is used for draining; a hose nozzle and hose for fitting to the drain are included. The unit measures 325 x 265 x 300 mm, weighs 7.4 kg and has side handles.Larger tank with heatingIf you need more capacity and heating up to 80 °C, the DT 514 H is the model for you, with a total capacity of 13.5 l, 600 watts of heating power and 860 watts of peak ultrasonic power. The DT 510 H, with a 9.7-litre capacity, is the smaller of the two baths and has a footprint of 325 x 265 mm.AccessoriesFor the DT 510 H, Bandelin supplies the K 10 insert basket (up to 10 kg), the GH 10 instrument holder, the D 510 lid, the DE 510 perforated lid for four insert cups, the ED 9 injection nozzle holder, the ZF 10 laboratory flask holder and the KW 10-0 polypropylene hanging tray. 0.6-litre insert cups are available in glass, plastic and stainless steel. Clamps EK 10 to EK 250 hold laboratory flasks with diameters up to 85 mm.Typical applicationsCleaning of items of various shapes, types and sizes in laboratories, medical practices and workshops at an adjustable bath temperatureRapid degassing of liquidsHomogenisation and emulsificationSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat temperatures can be set?20 to 80 °C at 400 watts of heating power.Where is the drain?On the left, as a G 1/2 ball valve.How does the DT 510 H differ from the DT 510?Both have the same tank and the same ultrasonic power. The DT 510 H also features a heating element and boiling delay protection.What is the unit’s current consumption?2.5 A at 230 V and 4.9 A at 115 V. The 3206 model is available with a CEE 7/7 EU plug for 230 V; Bandelin offers UK, Swiss and US variants under separate order numbers.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mm (excluding handles and ball valve, including feet)Weight (net / gross)7.4 kg / 9.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating400 W, adjustable temperature range 20 to 80 °C, boiling delay protection, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, boiling delay protection, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 510 H ultrasonic bath with heaterMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert cups, and they are available separately.Individual requirements and procurement serviceFor accessories such as the K 10 basket, the D 510 lid or another heated model, individual procurement requirements apply. You can request a quote without obligation via our procurement service.

The same tank as the RK 510, but with a heater: The Bandelin SONOREX SUPER RK 510 H also has a capacity of 9.7 litres (6.6 litres working volume) and adds a 400-watt heater to its unheated counterpart for cleaning processes that require a heated medium.400-watt heating element with dry-run protectionThe heating element operates between 30 and 80 °C and switches off automatically via the integrated dry-run protection as soon as there is insufficient liquid in the tank. Cleaning duration and temperature are set using two separate rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Same ultrasonic power as the unheated RK 510At an operating frequency of 35 kHz, the RK 510 H, like the RK 510, delivers 640 watts of peak power and 160 watts of rated power via four transducer systems, distributed evenly throughout the tank by the SweepTec function. The tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm.Slightly heavier due to the heating technologyWith a net weight of 7.5 kg, the RK 510 H is only slightly heavier than the unheated RK 510 (7.2 kg); the external dimensions of 325 x 265 x 300 mm are identical. A G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting it. Both variants share the same IP 32 protection rating and are classified as a Class I medical device in accordance with Regulation (EU) 2017/745.When the heating system is worth itGrease, oil or wax residues dissolve much more quickly in heated cleaning fluid than at room temperature; likewise, many cleaning concentrates only become fully effective above a certain temperature. Anyone who regularly deals with such contaminants will benefit from the RK 510 H. If, on the other hand, you work exclusively with pre-heated or cold cleaning media, the RK 510, which has the same design, saves on the additional heating technology.Product range: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range of tank capacities extends from 0.9 litres (RK 31) to 58 litres (RK 1050), all featuring rotary knob controls. The DIGITEC DT series is available for digital button operation with an LED display and automatic degassing, whilst the smart ST series offers touchscreen operation with programme memory. We also offer Elma Elmasonic ultrasonic baths as a second brand in our range.Use and maintenanceThe working capacity of 6.6 litres is less than the total capacity of 9.7 litres, ensuring that heated water does not spill over the rim when beakers or instruments are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning solution; it usually dissolves even more effectively at higher temperatures. Before the first cycle with a freshly prepared solution, a short initial run in continuous operation helps to expel dissolved air. After the last cleaning cycle of the day, the tank, whilst still warm, should be drained via the ball valve and wiped dry.Typical applicationsRemoval of grease and oil residues at elevated bath temperaturesHeat-assisted cleaning of instruments and laboratory glasswareCleaning processes using temperature-activated concentratesCleaning of multiple beakers or small parts in a single batchFrequently asked questionsWhat is the difference between the RK 510 H and the RK 510?Both share the same tank; the RK 510 H also has a 400-watt heater with a temperature range of 30 to 80 °C.What is the usable working capacity?6.6 litres out of a total capacity of 9.7 litres.Where is the drain?On the left, as a ball valve with a G 1/2 connection.Is a basket included in the scope of delivery?No, the K 10 insert basket and the D 510 lid are available separately.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.5 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating power400 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 H ultrasonic bath with heaterFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceThe K 10 insert basket, the D 510 lid or the unheated RK 510 version are available on request. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

Ultrasonic baths with a simple rotary knob reach their limits as soon as several batches are to be run in succession at exactly the same temperature. The Bandelin SONOREX DIGITEC DT 512 H solves this problem with push-button controls and an LED display that shows the remaining time as well as the setpoint and actual bath temperature. With a total volume of 13.0 l and a working capacity of 8.7 l, this ultrasonic bath is suitable for medium-sized batches from laboratories, workshops or medical practices, such as laboratory glassware, tools or small parts from manufacturing.Digital control with LED displayThe buttons replace the rotary knob found on the SUPER-RK series, whilst an LED display simultaneously shows the remaining cleaning time as well as the setpoint and actual temperature values. The time can be set in fixed increments of 1, 2, 3, 4, 5, 10, 15 or 30 minutes; alternatively, continuous operation is available, in each case with a tolerance of ±5 %. If the appliance remains unused for 12 hours without any buttons being pressed, the automatic safety shut-off switches it off.SweepTec, DEGAS and heating up to 80 °CThe fully automatic SweepTec function distributes the ultrasound evenly throughout the tank and prevents standing waves, which would otherwise lead to uneven cleaning. DEGAS rapidly degasses freshly prepared cleaning fluid, reducing the waiting time until the ultrasound takes full effect. The heating system covers a range of 20 to 80 °C and features built-in protection against delayed boiling and dry-run protection. With a nominal power of 215 watts and a peak power of 860 watts, distributed across four vibration systems, the bath generates cavitation.Which DIGITEC model is suitable: DT 100 H or DT 512 HWithin the DIGITEC range, the models differ primarily in terms of volume. The DT 100 H has a capacity of 3.0 l and is suitable for small quantities, such as individual tools, spectacles or small laboratory parts. The DT 512 H, with a total volume of 13.0 l and a working capacity of 8.7 l, is designed for medium-sized batches, such as several laboratory bottles at once or larger series of workpieces. Anyone who regularly cleans larger quantities or bulkier parts will find that the DT 512 H eliminates the need for multiple cycles.Differences from the SUPER RK and smart STThe SUPER RK series is operated via a traditional rotary knob, without a digital display or DEGAS function. The smart ST series goes one step further than DIGITEC, featuring a touchscreen, finely adjustable power settings from 10 to 100 % in 1 % increments, and a system bus interface for a docking station. The DIGITEC DT 512 H falls technically between the two, featuring a digital time and temperature display, but without a touchscreen or the additional programme memory of the smart ST range. The difference to the rotary-knob series is also evident in the protection rating: IP 33 instead of IP 32 for the SUPER RK.Day-to-day use and maintenanceThe drain is controlled via a G 1/2 ball valve on the left-hand side, which makes it easier to change the cleaning medium between batches. The basket and lid are not included in the scope of delivery; the K 10 B insert basket and the D 510 lid are suitable for the DT 512 H. The power cable, 2 metres long, is permanently attached to the unit; operation is possible at either 230 V or 115 V at 50/60 Hz. Protection class I and the heater’s dry-run protection are designed for daily laboratory use.Typical applicationsCleaning of laboratory glassware and pipettes in medium-sized batchesProcessing of tools and small parts in the workshopPre-cleaning of components prior to further processingCleaning tasks in medical practices and laboratories with varying temperature requirementsFrequently asked questionsIs the SONOREX DIGITEC DT 512 H a medical device?Yes, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745; it is also subject to the Low Voltage, EMC and RoHS Directives.Are the basket and lid included in the scope of delivery?No. The scope of delivery comprises the ultrasonic bath with a fixed mains cable and operating instructions; the K 10 B basket and D 510 lid are available separately.How does the DT 512 H differ from the smaller DT 100 H?With a total volume of 13.0 l and a nominal power of 215 watts, the DT 512 H has significantly more capacity than the DT 100 H, which has a volume of 3.0 l and a nominal power of 80 watts, making it suitable for larger batches or multiple batches at the same time.How is the cleaning bath changed?Via the G 1/2 ball valve on the left-hand side of the unit.Does the unit also run on 115 volts?Yes, the mains connection is designed for either 230 V or 115 V at 50/60 Hz.Technical detailsTotal volume13.0 lWorking capacity8.7 lInternal dimensions of the tank (L x W x D)300 x 240 x 200 mmExternal dimensions (L x W x H)325 x 265 x 350 mm (excluding handles/ball valve, including feet)Weightnet 8.2 kg / gross 10.2 kgTank materialStainless steel 1.4301, 1.0 mmUltrasonic frequency35 kHzUltrasonic power215 W nominal power, 860 W peak power, 4 vibration systemsHeating power400 WTemperature range20 to 80 °CTimer1/2/3/4/5/10/15/30 minutes (±5 %) or continuous operation, automatic safety shut-off after 12 hoursOperationButtons, LED display showing remaining time and setpoint/actual bath temperatureFunctionsSweepTec, DEGAS rapid degassing, pulse function, protection against delayed boiling, dry-run protection heaterDrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.7 A / 115 V 5.4 AProtection ratingIP 33ClassificationClass I medical device (EU 2017/745)Scope of delivery1x Bandelin SONOREX DIGITEC DT 512 H ultrasonic bathFixed mains lead (2 m)Instructions for useThe K 10 B insert basket and D 510 lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor suitable baskets, lids or cleaning concentrates for the DIGITEC range, please contact our procurement service.

The inner depth of the Bandelin SONOREX DIGITEC DT 510 F bath is just 65 mm. With a base area of 300 x 240 mm, it has a capacity of 4.3 l, of which 2.5 l are usable as working volume. The set comprises the bath, the K 10 F insert basket and one litre of TICKOPUR R 33. The bath belongs to the F series and is designed for sample preparation: samples in laboratory flasks and vessels are subjected to ultrasonic treatment, homogenised or degassed indirectly via the bath water.Indirect ultrasonic treatment in a shallow tankAccording to the manufacturer, direct ultrasonic treatment of objects and the cleaning of items are not permitted with the F series. The DT series baths without the ‘F’ designation are intended for the ultrasonic cleaning of objects, for example the DT 510. It has the same footprint of 300 x 240 mm, but the tank is more than twice as deep at 150 mm and has a capacity of 9.7 l.Four vibration systems, SweepTec and DEGASFour vibration systems operate at 35 kHz with a peak power of 560 watts; the nominal power is 140 watts. The SweepTec function runs fully automatically and prevents standing waves in the ultrasonic field, ensuring that samples are exposed to ultrasonic waves evenly regardless of their size and arrangement. In addition, there is a pulse function and DEGAS for rapid degassing of the sonication fluid. Twelve hours after the last button press, the unit switches itself off automatically.Buttons, timer and displayThe unit is operated via wipe-clean buttons. An LED progress indicator on the time scale shows the remaining sonication time. The timer offers settings of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) as well as continuous operation.Tank, drain and dimensionsThe tank (1.0 mm) and housing are made of 1.4301 stainless steel. Drainage is via a G 1/2 ball valve on the left-hand side, to which a 50 cm long hose is attached. The external dimensions of the bath are 325 x 265 x 195 mm (excluding handles and ball valve, including feet). The set has a net weight of 5.9 kg; the shipping weight is 7.5 kg with packaging dimensions of 450 x 390 x 275 mm. The handles on the sides make it easier to move the unit. The power cable is 2 m long and permanently attached to the unit; the protection rating is IP 33. The DT 1028 F from the same F series offers more space for samples, with internal dimensions of 500 x 300 x 65 mm and a working capacity of 5.8 l. It is available as part of the SONOSHAKE set with the SA 1028 shaking attachment.Insert basket, TICKOPUR and holding clampsThe set includes the K 10 F insert basket made of stainless steel (230 x 195 x 35 mm, mesh size 5 x 5 mm, load capacity up to 10 kg). The basket holds the sample vessels within the ultrasonic field, ensuring that nothing rests on the bottom of the tank. The included litre of TICKOPUR R 33 is the ultrasonic additive for the bath fluid. Bandelin also offers the polypropylene insert grid EG 1 as an accessory. The EK 10 to EK 250 stainless steel holding clamps are screwed into the basket and accommodate laboratory flasks ranging from 10 to 250 ml; the EK 10 accommodates flasks up to 31 mm in diameter, whilst the EK 250 accommodates flasks up to 85 mm. They prevent the flasks from tipping over or floating to the surface. The FT 14 foil test frame can be used to check the ultrasonication.Typical applicationsSample preparation in the laboratory and in industrial and scientific researchUniform indirect sonication of samples, including those in laboratory flasksHomogenisation of samplesRapid degassing, for example in diagnostics, environmental and food analysisSonochemistryFrequently asked questionsCan I clean tools or laboratory glassware in the DT 510 F?No, the F series is designed for the indirect sonication of samples. According to the manufacturer, direct sonication and the cleaning of items are not permitted.How much water goes into the tank?The working capacity is 2.5 l; the fill-level mark in the tank indicates the level. According to the manufacturer, plain water is unsuitable. When using TICKOPUR R 33, the volume is 2.4 l of water plus 25 ml if using deionised water (1 %) or 75 ml if using tap water (3 %).How is the bath drained?Via the G 1/2 ball valve on the left-hand side, to which a 50 cm hose is attached.What is included in the set and what else do I need?The set includes the bath, the K 10 F insert basket and 1 l of TICKOPUR R 33. According to the manufacturer, during sonication the sample vessels stand on a basket or holder; nothing must stand or lie directly on the bottom of the tank. For laboratory flasks, holding clamps are used in addition and are available separately.Technical detailsTotal capacity / Working capacity4.3 l / 2.5 l, fill level markingsInternal dimensions of tank (L x W x D)300 x 240 x 65 mmExternal dimensions (L x W x H)325 x 265 x 195 mm (excluding handles and ball valve, including feet)Set weight (net / gross)5.9 kg / 7.5 kgPackaging (L x W x H)450 x 390 x 275 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 560 W, nominal power 140 W, 4 vibration systemsFunctionsPulse function, SweepTec, DEGAS rapid degassing, safety shut-off 12 hours after last button pressTimer1, 2, 3, 4, 5, 10, 15, 30 minutes (± 5 %) or continuous operationOperationButtonsTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainG 1/2 ball valve with 50 cm hose, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of delivery1x Bandelin SONOREX DIGITEC DT 510 F ultrasonic bath1x K 10 F insert basket1 l TICKOPUR R 33Mains cable (2 m, permanently attached to the unit, 230 V with EU plug CEE 7/7)Ball valve, hose connector and hose for fitting to the drainHolding clamps, insert grids and film test frames are available separately.Individual requirements and procurement serviceThere is an individual procurement need for holding clamps, insert grids or film test frames. You can request a quote via our procurement service for suitable accessories, further TICKOPUR containers or another SONOREX model.

The Bandelin SONOREX DIGITEC DT 510 has four vibration systems and a tank measuring 300 x 240 x 150 mm internally and with a capacity of 9.7 l. The unit is unheated, is operated via buttons and is drained via a ball valve.Tank and vibration systemsThe working capacity is 6.6 l; the level indicator shows the fill level. The tank is 1.0 mm thick and, like the housing, is made of 1.4301 stainless steel. At 35 kHz, the four vibration systems deliver a peak power of 640 watts; the rated power is 160 watts. The two vibration systems of the DT 255 achieve the same peak power with a narrower tank.SweepTec, pulse and DEGASThe SweepTec function automatically prevents standing waves in the ultrasonic field. In addition, there is a pulse function and the DEGAS degassing function, which is activated at the start of the cleaning process. Twelve hours after the last button press, the unit switches off automatically.Operation and drainControl is via wipeable buttons; the display shows the remaining running time. The timer offers settings of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) as well as continuous operation. The G 1/2 ball valve is located on the left-hand side; the hose connector and hose for connecting to the drain are included with the unit. If you require an adjustable heating function ranging from 20 to 80 °C, this is available in the DT 510 H model, which features the same tank.Dimensions, weight and connectionsWith external dimensions of 325 x 265 x 300 mm and a weight of 7.3 kg, the bath can still be easily moved using the side handles. The 2 m long mains cable is permanently connected; the current consumption is 0.7 A at 230 V. Degree of protection IP 33, ambient temperature 5 to 40 °C.Holders, baskets and insertsBandelin offers the following accessories for the DT 510: the K 10 insert basket (250 x 195 x 50 mm, mesh size 5 x 5 mm, up to 10 kg), the GH 10 appliance holder (260 x 200 mm, up to 10 kg), the D 510 lid and the DE 510 perforated lid for four insert cups. The ED 9 injection nozzle holder, made of stainless steel, has holes with diameters of 9.5, 5.5, 4.5 and 3.5 mm. ZF 10 laboratory flask holders secure flasks in the insert basket; the KW 10-0 hanging tray (242 x 182 x 135 mm) is made of polypropylene.Typical applicationsUltrasonic cleaning of items of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of multiple parts simultaneously in the insert basketCleaning of injection nozzles using the ED 9 nozzle holderRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of Class I medical devices; the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhere is the drain?On the left-hand side, as a G 1/2 ball valve.Does the DT 510 have a heating function?No. The heated version is the DT 510 H.How many insert cups fit under the perforated lid?The DE 510 perforated lid is designed to hold four insert cups.Are there other plug types available?Bandelin supplies GB, CH and US variants under their own order numbers, such as 3245-GB. The 3245 model is available with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mm (excluding handles and ball valve, including feet)Weight (net / gross)7.3 kg / 8.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 510 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert cups, and they are available separately.Individual requirements and procurement serviceFor the K 10 insert basket, the D 510 lid, the ED 9 nozzle holder or the heated version DT 510 H, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories or another SONOREX model.

Not every cleaning task requires heat. If you are already working with a medium at a specific temperature or at room temperature, an additional heating element is simply unnecessary technology in the unit. The Bandelin SONOREX SUPER RK 510 has a total capacity of 9.7 litres and a working capacity of 6.6 litres, providing ample space for laboratory glassware and larger small parts; it is deliberately designed without a heating function.Powerful cleaning even without heatAt an operating frequency of 35 kHz, the RK 510 delivers 640 watts of peak power and 160 watts of rated power via four vibration systems. The SweepTec function continuously modulates the ultrasonic field to prevent standing waves from forming and ensure that cavitation acts evenly throughout the tank, even without auxiliary heating.Robust tank for daily useThe tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm. Operation is via a rotary knob; the timer covers 1 to 15 minutes (± 5 %), and continuous operation is also available. With a net weight of 7.2 kg and external dimensions of 325 x 265 x 300 mm, the unit can be moved around the laboratory with minimal effort.Ball valve drain for easy medium changeA G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting or tilting it, which is practical when the cleaning medium needs to be changed frequently. IP 32 protection rating and CE conformity according to the Medical Devices Regulation, the Low Voltage Directive, the EMC Directive and the RoHS Directive allow it to be used in laboratories, medical practices and workshops alike.Selection guide: unheated or with heatingThe RK 510 shares the same tank size as the heated RK 510 H; both have a capacity of 9.7 litres, with a working volume of 6.6 litres. Those working exclusively with cold or pre-tempered media can save on the additional heating technology with the RK 510. As soon as grease or oil residues require a higher bath temperature, the RK 510 H is the more suitable choice, given the identical tank size.Product range breakdown: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range extends from 0.9 litres (RK 31) to 58 litres (RK 1050), with operation consistently via rotary knobs. Those looking instead for a digital display with DEGAS degassing will find this in the DIGITEC DT series, whilst the smart ST series features touchscreen operation with programme memory. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and maintenanceThe working capacity of 6.6 litres is deliberately set below the total capacity of 9.7 litres to prevent water from spilling over the rim when beakers or laboratory glassware are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid. A short pre-run in continuous operation before the first cleaning cycle removes dissolved air from freshly prepared medium. After the last use of the day, the tank can be drained via the ball valve and then wiped dry to prevent limescale or cleaning agent residues.Typical applicationsCleaning of beakers and laboratory glassware without the need for heatDegassing of aqueous solutions prior to analytical proceduresCleaning of tools and small parts in the workshopPre-cleaning of larger batches of instruments prior to further processingFrequently asked questionsCan the RK 510 be heated?No, the RK 510 is the unheated version; the heated version with the same tank size is the RK 510 H.Where is the drain?On the left, as a ball valve with a G 1/2 connection.How much volume is actually available for cleaning?6.6 litres working capacity with a total capacity of 9.7 litres.Is the device a medical device?Yes, Class I according to Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 ultrasonic bathFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 10 insert basket, the D 510 lid or the heated version RK 510 H, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories, a replacement basket or another model from the SONOREX range.

SONOREX SUPER RK 512 H ultrasonic bath with heating for everyday laboratory use The SONOREX SUPER RK 512 H is an ultrasonic bath with heating designed for cleaning tasks in everyday laboratory and practice work. With a total volume of 13 litres and a usable working capacity of 8.7 litres, the stainless steel tank offers sufficient space for laboratory glassware, small parts and instruments. The ultrasonic cleaning operates at a frequency of 35 kHz with a peak power of 860 W and an effective nominal power of 215 W, reliably and gently removing adhering dirt, residues and deposits. Thanks to its compact external dimensions of 325 x 265 x 350 mm, the ultrasonic bath can be flexibly positioned on laboratory benches, workbenches or in smaller cleaning stations without taking up much space. Thanks to the combination of powerful ultrasonic cleaning and adjustable heating, the SONOREX SUPER RK 512 H is suitable both for occasional use at a single workstation and for regular use in laboratories with a higher throughput of small parts and glassware requiring cleaning. Laboratory applications Typical applications for this ultrasonic bath include the cleaning of laboratory glassware and small parts, the pre-cleaning and preparation of instruments, and the degassing of solvents prior to analytical applications. Thanks to its comparatively large working capacity of 8.7 litres, the unit is also suitable for the routine cleaning of pipettes, sample vessels and other small parts used in everyday laboratory work. The integrated heater allows temperature control from 30 to 80 °C, which further enhances the cleaning effect on more stubborn residues and enables a process temperature tailored to the specific application and cleaning agent. The cleaning duration and bath temperature can be set directly and easily on the unit using the rotary knob; the timer covers a range of 1 to 15 minutes (±5 %) as well as continuous operation, so that both short cleaning cycles and longer applications can be carried out. A fill-level mark inside the tank facilitates correct and repeatable filling with cleaning fluid. Robust construction for continuous use The tank and housing of the ultrasonic bath are made of 1.4301 stainless steel; the ultrasonic tank itself has a wall thickness of 1.0 mm. A G 1/2 ball valve on the side, with a hose (packed separately, for mounting), allows the cleaning fluid to be drained easily and cleanly without having to lift or tilt the tank. Handles on the sides make it easy to move the unit, whilst the fixed, 2-metre-long mains cable ensures straightforward connection to a 230 V power supply. With an IP 32 protection rating, the housing is protected against foreign bodies larger than 2.5 mm and dripping water falling at an angle. The unit is CE-marked as a Class I medical device in accordance with Regulation (EU) 2017/745 and also complies with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. Technical details ModelSONOREX SUPER RK 512 H Frequency35 kHz Ultrasonic powerPeak power 860 W, nominal power (effective) 215 W Heating power400 W Temperature range30 to 80 °C, adjustable Timer1 to 15 min (±5 %), plus continuous operation Total capacity / Working capacity13.0 l / 8.7 l External dimensions (L x W x H)325 x 265 x 350 mm Internal dimensions (L x W x D)300 x 240 x 200 mm Weight10.1 kg Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) DrainG 1/2 ball valve with hose (packed separately, for mounting), left-hand side Degree of protection, housingIP 32 Operating voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x SONOREX SUPER RK 512 H ultrasonic bath with heating Operating instructions Fixed mains cable (2 m) Insert baskets, lids and cleaning concentrates are not included in the scope of delivery. Individual requirements & procurement service Our procurement service accepts enquiries for insert baskets, lids, cleaning concentrates or another model in the SONOREX range.