IKA T 18 mini digital Solution Disperser Set, brushless motor including tool and stand, 0010015137

Not every laboratory workstation has room for a large drive, and not every sample requires 500 watts of power. The IKA T 18 mini digital Solution (0010015137) is designed precisely for these situations: a compact, brushless disperser set with an attachment and stand that can be accommodated even in small spaces and is designed for samples with lower viscosity.

Compact brushless drive

With external dimensions of 66 x 186 x 100 millimetres and a weight of 1.8 kilograms, the drive unit is significantly smaller than the classic T 18 digital. The brushless DC motor delivers 210 watts of input power and 160 watts of output power, and is designed for a maximum viscosity of 2,000 mPas. As with the larger series, the speed range extends from 3,000 to 25,000 revolutions per minute, albeit with a slightly higher tolerance of 3 per cent.

Digital display, timer and USB-C

The LED display shows the set speed, whilst an integrated timer with its own LED display manages the process time, meaning that runs do not need to be stopped manually. The device can be connected to a documentation system via the USB-C interface. In standby mode, power consumption is just 3 watts, whilst the maximum power consumption of the unit is 250 watts. Power is supplied internally via 48 volts DC at a current draw of 4,500 milliamps; the power supply unit itself covers the range from 100 to 240 volts and can therefore be used worldwide without the need for a separate voltage converter.

Designed for smaller volumes and lower viscosity

According to the manufacturer, the T 18 mini digital Solution is suitable for simple applications involving the homogenisation of low-viscosity samples. As with the larger model, the processable volume ranges from 0.001 to 1.5 litres; however, the maximum viscosity of 2,000 mPas is lower than that of the T 18 digital, which is 5,000 mPas. For routine samples in life sciences laboratories, training centres or smaller-scale quality control procedures that do not involve particularly viscous or high-volume batches, the performance is generally more than adequate.

What the compact design means in everyday use

With a footprint that is significantly smaller than that of the classic T 18 digital, the T 18 mini digital Solution can be accommodated even where several workstations are positioned close together, such as in practical training rooms or at smaller fume cupboard workstations. The lower weight of 1.8 kilograms also makes manual operation more comfortable over longer periods when a stand is not used. Those who regularly switch between several workstations also benefit from the fact that the compact unit is easier to transport than the larger series.

Typical applications

• Homogenisation of low-viscosity samples (according to the manufacturer)
• Smaller batches in life sciences and teaching laboratories
• Workstations with limited floor space
• Processes with documented time control via the integrated timer

Brief overview within the T-18 range

For those requiring higher viscosity or greater motor power, the larger T 18 digital Solution offers the ideal set with a power consumption of 500 watts instead of 210 watts. LT Laborhandel supplies the drive unit on its own as the T 18 digital ULTRA-TURRAX; the dispersing tool included in the set is also available separately as the S 18 N - 19 G dispersing tool.

Technical details

Contents

• 1 x IKA T 18 mini digital ULTRA-TURRAX (drive unit)
• 1 x S 18 N - 19 G dispersing tool
• 1 x R 1826 plate stand
• 1 x R 182 cross-sleeve

Differences from the neighbouring series

If you only require the drive unit without the set, it is available as the T 18 mini digital ULTRA-TURRAX. An overview of all dispersing units at LT Laborhandel can be found in the ‘Dispersing Units’ category; suitable tools are listed under ‘Dispersing Tools’.

Application, installation and maintenance

With an IP 30 protection rating, the drive unit is slightly better protected against the ingress of foreign objects than the classic T 18 digital with IP 20; however, it is still not designed to withstand splashing water. Operation is permitted at an ambient temperature of 5 to 40 degrees Celsius and a relative humidity of up to 80 per cent. The tool’s supplied PTFE bearing must not run dry; the medium provides both lubrication and cooling. The integrated timer reduces the effort required for manual time control in recurring processes, but does not replace the need to monitor the batch. At the end of its service life, as an electrical appliance, the drive must not be disposed of with household waste, but must be placed in the separate collection for waste electrical and electronic equipment.

When the mini drive is a worthwhile investment

If the viscosity of the samples is up to a maximum of 2,000 mPas and the focus is on a compact design, a timer and documentation via USB-C, the T 18 mini digital Solution reliably meets these requirements. If, on the other hand, thicker media up to 5,000 mPas are regularly processed, or if the higher power consumption of 500 watts is required, the larger T 18 digital Solution is the more suitable choice. Both sets share the same standard tool, the S 18 N – 19 G, so switching between the two sizes does not necessarily change the choice of tool. For laboratories that need to meet both requirements simultaneously – for example, a sensitive batch with low viscosity followed by a more viscous sample – it may also be worthwhile to purchase both sizes for different workstations.

Individual requirements & procurement service

Those who also work with disposable dispersing tools will find the S 18/25-ET50 disposable tube from LT Laborhandel to be a practical cleaning aid. Do you also require an additional stand for a second workstation or assistance with the USB connection to your documentation system? Through our procurement service, LT Laborhandel supports you with procurement and configuration.

Frequently Asked Questions

For which samples is the T 18 mini digital Solution suitable?
According to the manufacturer, it is suitable for simple applications involving the homogenisation of low-viscosity samples, up to a maximum of 2,000 mPas.

How does it differ from the larger T 18 digital Solution?
The mini drive is brushless with a power consumption of 210 watts instead of 500 watts; it is more compact and designed for a lower maximum viscosity, but features a timer and a USB-C interface.

Is a stand included in the scope of delivery?
Yes, the set includes an R 1826 plate stand with an R 182 cross-sleeve.

What is the USB-C interface used for?
The USB-C port allows the device to be connected to a documentation system to record process data.

What is the drive’s protection rating?
IP 30 in accordance with DIN EN 60529, which protects against the ingress of foreign objects larger than 2.5 millimetres, but not against splashing water.

Can I operate the drive worldwide without a voltage converter?
Yes, the mains adaptor covers a range of 100 to 240 volts at 50/60 hertz.