Memmert IN750plus Incubator 749 L TwinDISPLAY & Natural Convection, on castors

The Memmert IN750plus is a mobile, large-capacity incubator with natural convection, specially developed for laboratory applications where air turbulence must be avoided. With an enormous chamber volume of 749 litres and the advanced TwinDISPLAY control system, this model offers maximum process reliability for research, medicine, pharmaceuticals and food technology. Thanks to the standard lockable castors, this large unit can be positioned flexibly within the laboratory.

High-end control system: ControlCOCKPIT with TwinDISPLAY

Unlike the standard version, the IN750plus features the adaptive TwinDISPLAY. Two high-resolution TFT colour graphic displays (touchscreens) enable intuitive setting and monitoring of all parameters. Make use of exclusive functions such as HeatBALANCE for individual adjustment of the heating power distribution (top/bottom) or the graphical programming of temperature profiles directly on the unit.

Gentle temperature control without forced air circulation

Natural convection ensures purely thermal air circulation without a fan. This effectively prevents samples from drying out and minimises the risk of cross-contamination caused by airborne particles. The integrated 4-sided all-round heating guarantees homogeneous temperature distribution throughout the entire stainless steel interior.

Maximum safety & sterilisation

The IN750plus offers dual safety through two Pt100 temperature sensors (DIN Class A), which monitor each other and take over operation in the event of a fault (AutoSAFETY). For hygiene-critical areas, a permanently installed sterilisation programme is integrated, which reliably sterilises the interior (without a load) at +160 °C for 4 hours.

Technical Details

• Model: Memmert IN750plus (2012 generation)
• Capacity: 749 litres
• Convection type: Natural convection (no forced air circulation)
• Temperature setting range: +20 °C to +80 °C
• Operating temperature range: At least 5 °C above room temperature to +80 °C
• Setting accuracy: 0.1 °C
• Control: TwinDISPLAY (2x TFT touchscreen)
• Temperature sensors: 2x Pt100 sensors, DIN Class A (4-wire measurement)
• Sterilisation: Integrated programme (4 hours / 160 °C) for internal sterilisation
• Functions: HeatBALANCE, SetpointWAIT, AtmoCONTROL
• Interior: Stainless steel (grade 1.4301), deep-drawn ribbing
• Outer casing: Textured stainless steel sheet, galvanised rear panel
• Internal dimensions (W x H x D): 1040 x 1200 x 600 mm
• External dimensions (W x H x D): 1224 x 1720 x 784 mm (depth excluding door handle, +56 mm for handle)
• Installation: Mobile on lockable castors
• Doors: Double-leaf (stainless steel exterior, glass interior)
• Load capacity: Max. 300 kg total / max. 30 kg per shelf
• Inserts: 2 stainless steel wire mesh shelves included, max. 14 possible
• Interfaces: Ethernet LAN, USB (for programme transfer/logging)
• Voltage / Power: 230 V, 50/60 Hz / approx. 2000 W
• Net weight: approx. 217 kg

Scope of delivery

• Memmert IN750plus incubator (basic unit on castors)
• 2 x stainless steel wire shelves (electropolished)
• 1 x factory calibration certificate (at +37 °C)
• 1 x USB stick with AtmoCONTROL software
• 1 x mains lead
• Operating instructions

Customised requirements & procurement service

Do you require additional stainless steel grating trays (up to 14 available), reinforced trays for heavy loads or a feed-through for external sensors? We’ll configure your Memmert incubator precisely to your laboratory requirements. Make use of our bespoke procurement service for accessories and special requests.