Memmert stainless steel grid B38955 for sizes 1400 and 2200

The Memmert Peltier-cooled incubator IPP1400eco has a double-leaf door and 1,360 litres of interior volume, with four shelves as standard and a maximum of 28 possible. Heating and cooling in the setting temperature range of 0 to +70 °C is again provided by a Peltier element integrated in the rear wall, without a compressor and without refrigerant. The unit is operated via the ControlCOCKPIT SingleDISPLAY with TFT colour graphic display.Double-leaf door and four grid shelvesThe stainless steel doors with glass cut-out are of double-leaf design, with fully heated inner glass panes fitted into full-view glass doors with 2-point locking (compression lock). Four electropolished stainless steel grid shelves are fitted as standard, and the interior carries a total of 250 kilograms at a maximum of 30 kilograms per shelf. At 345 kilograms net weight, the unit is considerably heavier than the IPP1060eco at 248 kilograms and stands on castors that can be moved and locked in place.ControlCOCKPIT and temperature managementA Pt100 sensor of DIN class A measures in 4-wire technology with 0.1 °C setting accuracy, and SetpointWAIT starts the process time only when the set temperature has been reached. An electronic temperature monitor and the mechanical temperature limiter TB provide additional protection, a self-diagnosis system helps with fault finding, and the data logger records even in the event of a power failure and can be read out via Ethernet. A lockable door with two locks is available as option B62. In addition to CE, the unit also carries the EAC marking.When the double-leaf IPP1400eco is worthwhileIf the 1,060 litres of the IPP1060eco are sufficient, you save the higher weight and larger space requirement of the IPP1400eco (external dimensions 1,435 × 1,913 × 905 mm compared with 1,224 × 1,720 × 1,005 mm). If sample quantity and sample throughput continue to grow, however, the IPP2200eco with a triple-leaf door and again considerably more volume follows in the series. Typical applicationsWith 1,360 litres and four standard shelves, the IPP1400eco is suitable for the core applications of the series on a larger scale:Microbiological examinations and germ count determination with a high sample volumeCultivation of samples above and below room temperatureForced ageing tests for beer stability on a larger scaleShelf-life tests of dairy products with several batches in parallelTechnical detailsInterior volume1,360 lInternal dimensions (W×H×D)1,250 × 1,450 × 750 mm (depth reduced by 32 mm due to fan/Peltier element)External dimensions (W×H×D)1,435 × 1,913 × 905 mm (depth plus 56 mm door handle and 111 mm Peltier element)Setting temperature range0 to +70 °CWorking temperature range (without light)0 °C (min. 20 °C below room temperature) to +70 °CSetting accuracy0.1 °CTemperature sensor1× Pt100 DIN class A, 4-wire measurementCooling/heating principlePeltier (Advanced Peltier Technology), integrated in rear wall, without compressorVentilationForced internal air circulation by Peltier circulating fanControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller with TFT colour graphic displayDoorStainless steel doors with glass cut-out, fully heated inner glass panes, double-leaf, 2-point lockingMarkingCE, EACShelves standard/max.4 / 28Max. load250 kg total / 30 kg per shelfHousingFully galvanised sheet steel rear wallAmbient conditions+16 to +40 °C, max. 70 % rh non-condensing, max. 2,000 m above sea levelVoltage/power230 V or 115 V, 50/60 Hz, approx. 1,300 WNet weight/gross weight345 kg / 523 kg (carton)Other sizes in the seriesWithin the IPP-eco series, seven chamber sizes from 108 to 2,140 litres are available, all with SingleDISPLAY and the same setting temperature range of 0 to +70 °C:ModelInternal volumeSetting temperatureDisplayIPP110eco108 l0 to +70 °CSingleDISPLAYIPP260eco256 l0 to +70 °CSingleDISPLAYIPP410eco384 l0 to +70 °CSingleDISPLAYIPP750eco749 l0 to +70 °CSingleDISPLAYIPP1060eco1,060 l0 to +70 °CSingleDISPLAYIPP1400eco (this page)1,360 l0 to +70 °CSingleDISPLAYIPP2200eco2,140 l0 to +70 °CSingleDISPLAYThe IPP-eco series is also available with TwinDISPLAY as IPP-ecoplus. The counterpart with 1,360 litres is the IPP1400ecoplus, with two displays and two Pt100 sensors for mutual monitoring.Scope of delivery1× Memmert Peltier-cooled incubator IPP1400eco (basic unit)Stainless steel doors with glass cut-out, fully heated inner glass panes, double-leaf4× stainless steel grid shelves, electropolished1× factory calibration certificate (calibration at +10/+25/+40 °C)Regulatory informationThe unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal.Individual requirements and procurement serviceFor the IPP-eco series, further options are available, such as individual cable feed-throughs on the left, right or rear, a 4-20 mA current interface, lockable doors with two locks, a potential-free alarm contact or MobileALERT alarm notification. Calibrations at the factory, on site or according to DAkkS, IQ/OQ/PQ qualifications and maintenance contracts can also be ordered. For individual equipment or spare parts, we will gladly accept an enquiry.

The Memmert Peltier-cooled incubator IPP1400ecoplus holds 1,360 litres and has two stainless steel doors with glass cut-out, each with its own 2-point locking. Each door has a fully heated inner glass pane, so the interior can be viewed through the glass cut-out without opening the door. The unit stands on castors that can be moved, locked and levelled, and is intended for cultivation below room temperature on a large scale, adjustable between 0 and plus 70 °C.Two doors with heated glass panesThe two stainless steel doors each have a glass cut-out with a fully heated inner glass pane and 2-point locking per door. Optionally, each door can be locked individually or equipped with a process-dependent programmable door lock and its own door-open detection. For alarm notification by SMS, the MobileALERT option can be ordered, which requires the potential-free alarm contact.Control and capacityTwo Pt100 sensors of DIN class A quality monitor each other, and temperature monitoring is electronic with mechanical limiter TB. Up to 28 shelves are available in the interior, 4 electropolished stainless steel grid shelves are fitted as standard, and the total load is 250 kilograms and 30 kilograms per shelf. The unit stands on castors that can be moved, locked and levelled.Choosing the right sizeIf 1,060 litres and 14 shelves are sufficient, the IPP1060ecoplus with approx. 248 kilograms net weight and an external height of 1,720 mm is the lighter and lower alternative. For an even higher space requirement and the wish for a third door, the way leads to the IPP2200ecoplus, which is connected at 230 volts, 50/60 Hz and approx. 1,900 W.Typical applicationsThe IPP1400ecoplus is designed for cultivation below room temperature, with a setting range of 0 to +70 °C and a setting accuracy of 0.1 °C:Cultivation of samples and cultures down to at least 20 °C below room temperatureIncubation of large quantities on up to 28 shelves with a load capacity of 30 kg eachVisual inspection through the glass cut-outs of the two doors without opening the chamberTime-controlled temperature programs with SetpointWAIT and timer up to 99 days, programmed via AtmoCONTROLProcesses with validation requirements, supported by orderable IQ/OQ documents and the AtmoCONTROL FDA licence for 21 CFR Part 11Technical detailsInterior volume1,360 lInternal dimensions (W×H×D)1,250 × 1,450 × 750 mm (depth minus 32 mm for fan)External dimensions (W×H×D)1,435 × 1,913 × 905 mmSetting temperature range0 to +70 °CWorking temperature range (without light)min. 20 °C below room temperature to +70 °CSetting accuracy0.1 °CSensors2× Pt100 DIN class A, 4-wire measurement, mutual monitoring with automatic takeover of functionCooling/heating principlePeltier element in the rear wall, no refrigerant, no compressorVentilationForced internal air circulation by Peltier circulating fanControlTwinDISPLAY, 2× TFT colour graphic displaySafety functionAdjustable electronic temperature monitor, mechanical temperature limiter TBDoor2× stainless steel door with glass cut-out, fully heated inner glass pane, 2-point locking per doorInstallationMobile, lockable and levelling, on castorsMax. load250 kg total / 30 kg per shelfMax. number of shelves28 (4 grid shelves in the scope of delivery)InterfacesEthernet + USB, programming via AtmoCONTROLVoltage/power230 V or 115 V, 50/60 Hz, approx. 1,300 WPackaging dimensions1,560 × 2,200 × 1,190 mmNet weight/gross weightapprox. 345 kg / approx. 523 kgOther sizes in the seriesThe IPP-ecoplus series covers seven chamber sizes, all with TwinDISPLAY and the same setting temperature range of 0 to +70 °C.ModelInternal volumeSetting temperatureDisplayIPP110ecoplus108 l0 to +70 °CTwinDISPLAYIPP260ecoplus256 l0 to +70 °CTwinDISPLAYIPP410ecoplus384 l0 to +70 °CTwinDISPLAYIPP750ecoplus749 l0 to +70 °CTwinDISPLAYIPP1060ecoplus1,060 l0 to +70 °CTwinDISPLAYIPP1400ecoplus (this page)1,360 l0 to +70 °CTwinDISPLAYIPP2200ecoplus2,140 l0 to +70 °CTwinDISPLAYThe same chamber size is also available in the SingleDISPLAY line as the IPP1400eco, without TwinDISPLAY redundancy and without the TwinDISPLAY-exclusive options.Scope of delivery1× Memmert Peltier-cooled incubator IPP1400ecoplus (basic unit)4× stainless steel grid shelf, electropolishedStainless steel doors with glass cut-out, fully heated inner glass panes, 2-point locking1× Factory calibration certificate (calibration at +10/+25/+40 °C)Regulatory informationThe unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal.Individual requirements and procurement serviceEach of the two doors can be locked individually or equipped with a programmable door lock and its own door-open detection. Additional stainless steel grid shelves, a potential-free alarm contact and calibration or maintenance services up to DAkkS calibration at the Memmert factory can also be ordered. Our procurement service will support you with the selection.

At 2,140 litres, the Memmert Peltier-cooled incubator IPP2200eco is the largest model in the IPP-eco series. The triple-leaf door gives access to six standard shelves, expandable to up to 42. Heating and cooling in the setting temperature range of 0 to +70 °C is provided by a Peltier element integrated in the rear wall, without a compressor and without refrigerant, controlled via the ControlCOCKPIT SingleDISPLAY.Triple-leaf door, 2,140 litres chamber volumeThe stainless steel doors with glass cut-out are of triple-leaf design and, as in the IPP1400eco, have fully heated inner glass panes fitted into full-view glass doors with 2-point locking (compression lock). Six electropolished stainless steel grid shelves are fitted as standard, and the interior carries a total of 330 kilograms at a maximum of 30 kilograms per shelf, whereas the IPP1400eco manages 250 kilograms. At 473 kilograms net weight and 2,140 litres of interior volume, the unit can still be moved on castors and locked in place, even though it needs considerably more floor space than its smaller siblings.Control, sensors and operational safetyA Pt100 sensor of DIN class A measures in 4-wire technology with 0.1 °C setting accuracy, and SetpointWAIT starts the process time only when the set temperature has been reached. An electronic temperature monitor and the mechanical temperature limiter TB provide additional protection, a self-diagnosis system helps with fault finding, and the data logger records even in the event of a power failure and can be read out via Ethernet. A lockable door with several locks is available as an option. In addition to CE, the unit also carries the EAC marking, and it is connected to 230 volts.When the IPP2200eco is suitableThe IPP2200eco offers a good double the volume of the IPP1060eco (1,060 litres) and a good 57 % more volume than the IPP1400eco (1,360 litres), with an external width of 2,157 mm. If 1,360 litres and a double-leaf door are sufficient, the IPP1400eco is better suited, as it is 722 mm narrower. The IPP2200eco is connected to 230 V, 50/60 Hz, at approx. 1,900 W, and the smaller models IPP410eco to IPP1400eco are also available for 115 V.Typical applicationsAs the largest model in the series, the IPP2200eco covers the core applications for large sample quantities:Microbiological examinations and germ count determination with a very high sample volumeCultivation of samples above and below room temperature on a large scaleForced ageing tests for beer stabilityShelf-life tests of dairy products with many parallel batchesTechnical detailsInterior volume2,140 lInternal dimensions (W×H×D)1,972 × 1,450 × 750 mm (depth reduced by 32 mm due to fan/Peltier element)External dimensions (W×H×D)2,157 × 1,913 × 905 mm (depth plus 56 mm door handle and 111 mm Peltier element)Setting temperature range0 to +70 °CWorking temperature range (without light)0 °C (min. 20 °C below room temperature) to +70 °CSetting accuracy0.1 °CTemperature sensor1× Pt100 DIN class A, 4-wire measurementCooling/heating principlePeltier (Advanced Peltier Technology), integrated in rear wall, without compressorVentilationForced internal air circulation by Peltier circulating fanControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller with TFT colour graphic displayDoorStainless steel doors with glass cut-out, fully heated inner glass panes, triple-leaf, 2-point lockingMarkingCE, EACShelves standard/max.6 / 42Max. load330 kg total / 30 kg per shelfHousingFully galvanised sheet steel rear wallAmbient conditions+16 to +40 °C, max. 70 % rh non-condensing, max. 2,000 m above sea levelVoltage/power230 V, 50/60 Hz, approx. 1,900 WNet weight/gross weight473 kg / 717 kg (carton)Other sizes in the seriesWithin the IPP-eco series, seven chamber sizes from 108 to 2,140 litres are available, all with SingleDISPLAY and the same setting temperature range of 0 to +70 °C:ModelInternal volumeSetting temperatureDisplayIPP110eco108 l0 to +70 °CSingleDISPLAYIPP260eco256 l0 to +70 °CSingleDISPLAYIPP410eco384 l0 to +70 °CSingleDISPLAYIPP750eco749 l0 to +70 °CSingleDISPLAYIPP1060eco1,060 l0 to +70 °CSingleDISPLAYIPP1400eco1,360 l0 to +70 °CSingleDISPLAYIPP2200eco (this page)2,140 l0 to +70 °CSingleDISPLAYThe IPP-eco series is also available with TwinDISPLAY as IPP-ecoplus. The counterpart with 2,140 litres is the IPP2200ecoplus, with two displays and two Pt100 sensors for mutual monitoring.Scope of delivery1× Memmert Peltier-cooled incubator IPP2200eco (basic unit)Stainless steel doors with glass cut-out, fully heated inner glass panes, triple-leaf6× stainless steel grid shelf, electropolished1× Factory calibration certificate (calibration at +10/+25/+40 °C)Regulatory informationThe unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal.Individual requirements and procurement serviceFor the IPP-eco series, further options are available, such as individual cable feed-throughs on the left, right or rear, a 4-20 mA current interface, lockable doors with several locks, a potential-free alarm contact or MobileALERT alarm notification. Calibrations at the factory, on site or according to DAkkS, IQ/OQ/PQ qualifications and maintenance contracts can also be ordered. For individual equipment or spare parts, we will gladly accept an enquiry.

At 2,140 litres, the Memmert Peltier-cooled incubator IPP2200ecoplus is the largest model in the ecoplus series and has three independently lockable doors with heated inner glass panes. It is intended for cultivation below room temperature on a large scale, adjustable between 0 and plus 70 °C, and has an interior of 1,972 × 1,450 × 750 mm. The IPP2200ecoplus is connected to 230 volts.Three doors and large capacityEach of the three stainless steel doors has a glass cut-out with a fully heated inner glass pane and its own 2-point locking. Optionally, each door can be locked individually or equipped with a process-dependent programmable door lock and its own door-open detection. Up to 42 shelves are available in the interior, 6 electropolished stainless steel grid shelves are fitted as standard, and the total load is 330 kilograms and 30 kilograms per shelf.Control and connectionTwo Pt100 sensors of DIN class A quality monitor each other, and protection is provided by an electronic temperature monitor with mechanical limiter TB. The unit stands on castors that can be moved, locked and levelled, which is important for fine adjustment at the installation site given a net weight of around 473 kilograms.Choosing the right sizeIf a smaller number of doors is sufficient, or if the unit is also to be operated with a 115-volt mains connection, the IPP1400ecoplus with two doors and 1,360 litres is the alternative. For the largest possible interior in the series and three doors, the IPP2200ecoplus remains the only option.Typical applicationsThe IPP2200ecoplus is designed for cultivation below room temperature, with a setting range of 0 to +70 °C and a setting accuracy of 0.1 °C:Cultivation of samples and cultures down to at least 20 °C below room temperatureIncubation of very large quantities on up to 42 shelves with a load capacity of 30 kg eachVisual inspection through the glass cut-outs of the three doors without opening the chamberTime-controlled temperature programs with SetpointWAIT and timer up to 99 days, programmed via AtmoCONTROLProcesses with validation requirements, supported by orderable IQ/OQ documents and the AtmoCONTROL FDA licence for 21 CFR Part 11Technical detailsInterior volume2,140 lInternal dimensions (W×H×D)1,972 × 1,450 × 750 mm (depth minus 32 mm for fan)External dimensions (W×H×D)2,157 × 1,913 × 905 mmSetting temperature range0 to +70 °CWorking temperature range (without light)min. 20 °C below room temperature to +70 °CSetting accuracy0.1 °CSensors2× Pt100 DIN class A, 4-wire measurement, mutual monitoring with automatic takeover of functionCooling/heating principlePeltier element in the rear wall, no refrigerant, no compressorVentilationForced internal air circulation by Peltier circulating fanControlTwinDISPLAY, 2× TFT colour graphic displaySafety functionAdjustable electronic temperature monitor, mechanical temperature limiter TBDoor3× stainless steel door with glass cut-out, fully heated inner glass pane, 2-point locking per doorInstallationMobile, lockable and levelling, on castorsMax. load330 kg total / 30 kg per shelfMax. number of shelves42 (6 grid shelves in the scope of delivery)InterfacesEthernet + USB, programming via AtmoCONTROLVoltage/power230 V, 50/60 Hz, approx. 1,900 WPackaging dimensions2,300 × 2,200 × 1,190 mmNet weight/gross weightapprox. 473 kg / approx. 717 kgOther sizes in the seriesThe IPP-ecoplus series covers seven chamber sizes, all with TwinDISPLAY and the same setting temperature range of 0 to +70 °C.ModelInternal volumeSetting temperatureDisplayIPP110ecoplus108 l0 to +70 °CTwinDISPLAYIPP260ecoplus256 l0 to +70 °CTwinDISPLAYIPP410ecoplus384 l0 to +70 °CTwinDISPLAYIPP750ecoplus749 l0 to +70 °CTwinDISPLAYIPP1060ecoplus1,060 l0 to +70 °CTwinDISPLAYIPP1400ecoplus1,360 l0 to +70 °CTwinDISPLAYIPP2200ecoplus (this page)2,140 l0 to +70 °CTwinDISPLAYThe same chamber size is also available in the SingleDISPLAY line as the IPP2200eco, without TwinDISPLAY redundancy and without the TwinDISPLAY-exclusive options.Scope of delivery1× Memmert Peltier-cooled incubator IPP2200ecoplus (basic unit)6× stainless steel grid shelf, electropolishedStainless steel doors with glass cut-out, fully heated inner glass panes, 2-point locking1× Factory calibration certificate (calibration at +10/+25/+40 °C)Regulatory informationThe unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal.Individual requirements and procurement serviceEach of the three doors can be locked individually or equipped with a programmable door lock and its own door-open detection. Additional stainless steel grid shelves, a potential-free alarm contact and calibration or maintenance services up to DAkkS calibration at the Memmert factory can also be ordered. Our procurement service will put together the right configuration for you.

The Memmert constant climate chamber HPP1400eco holds 1,360 litres and is the second-largest model of the HPPeco series. Without humidity it sets 0 to +70 °C, and in humidity operation +15 to +60 °C at 10 to 80 % rh apply. Both ranges belong to the unit and are selected depending on the application. The Peltier heating/cooling system sits in the rear wall, and there is no compressor and no refrigerant.Two operating ranges: with and without humidityWithout humidity, the setting temperature range extends from 0 to +70 °C, and the working temperature range begins at 0 °C (min. 20 °C below room temperature). With humidity, +15 to +60 °C can be set, and the lower limit of the working range here is +15 °C (min. 10 °C below room temperature). Humidity can be set from 10 to 80 % rh, with a setting accuracy of 0.5 % rh. The temperature can be set to an accuracy of 0.1 °C. Anyone who has to work with humidity below +15 °C or above 80 % rh will find the suitable alternative in the selection guide below.Water and humidity generationA hot steam generator humidifies, and a cold trap in Peltier technology dehumidifies. The self-priming pump delivers distilled water from an external container, and the supplied water canister has a connection hose. Alternatively, a central water supply can be connected to the domestic water, with filter cartridges (ZWVR6) or without (ZWVR7). The variant without filter cartridges requires demineralised, fully deionised water with a conductivity of 5 to 10 μS/cm and a pH value between 5 and 7. The factory calibration certificate states the measuring points +25 °C / 60 % rh and +40 °C / 75 % rh.Full-view glass doors and shelvesThe chamber has stainless steel doors with glass cut-out and fully heated inner glass panes, fitted into full-view glass doors with 2-point locking (compression door lock). The interior measures 1,250 x 1,450 x 750 mm (W x H x D), less 32 mm depth for the fan (Peltier). Four stainless steel grid shelves are inserted, up to 28 shelves are possible, with a maximum of 30 kg per shelf and 250 kg in total in the unit. With external dimensions of 1,435 x 1,913 x 905 mm (depth plus 56 mm door handle and 111 mm Peltier element) and a net weight of approx. 347 kg, it stands mobile and lockable on castors, and it can also be levelled. The ambient temperature may be +16 to +40 °C at a maximum of 70 % rel. humidity, non-condensing. Installation altitude up to 2,000 m above sea level, minimum distance 15 cm to the rear wall, 20 cm to the ceiling and 5 cm at the sides.Control and safetyThe ControlCOCKPIT TwinDISPLAY works with two TFT colour graphic displays and two Pt100 sensors of DIN class A, which monitor each other and take over the function of the other in the event of a fault. HeatBALANCE adjusts the heating power between the upper and lower heating group by -50 to +50 %, and SetpointWAIT starts the process time only when the setpoint temperature has been reached. The countdown clock covers 1 minute to 99 days, and three values each can be freely calibrated for temperature and humidity. Programs can be created and transferred via Ethernet LAN or USB with the AtmoCONTROL software, and the program sequence remains saved in the event of a power failure. Protection is provided by an adjustable temperature monitor of protection class 3.3 and AutoSAFETY with a freely selectable interval to the setpoint. When exceeded, AutoSAFETY switches the heating function off, and when fallen below the cooling function, and there are also a self-diagnosis system and visual and acoustic alarm.Selection guide: HPP1400eco comparedThe HPP1060eco with 1,060 l sets +5 to +70 °C with humidity and reaches 90 % rh, and it takes up to 14 shelves with 60 kg each. If humidity operation falls below +15 °C or goes above 80 % rh, it is the better choice. The HPP1400eco has more interior and shelf positions, but less load per shelf. Even more volume is offered by the HPP2200eco with 2,140 l, at the same humidity and temperature ranges, up to 42 shelves and a connected load of approx. 2,000 W instead of approx. 1,400 W.Typical applicationsTypical applications of the HPPeco series:Stability tests for cosmetics and foodShelf-life testing of dry food productsEnvironmental testing, materials testing and material testing in industryStability studies according to ICH guidelines (Q1A)Technical detailsSetting temperature range without humidity0 to +70 °CSetting temperature range with humidity+15 to +60 °CWorking temperature range without humidity0 °C (min. 20 °C below room temperature) to +70 °CWorking temperature range with humidity+15 °C (min. 10 °C below room temperature) to +60 °CTemperature setting accuracy0.1 °CHumidity range (setting range)10 to 80 % rhHumidity setting accuracy0.5 % rhHumidification and dehumidificationHot steam generator and cold trap in Peltier technologyHeating/cooling systemPeltier in the rear wall (heat pump principle), without compressorTemperature sensor2x Pt100, DIN class A, 4-wire measurement, mutual monitoringControlControlCOCKPIT TwinDISPLAY, adaptive PID microprocessor controller, 2x TFT colour graphic displayInternal volume1,360 lInternal dimensions (W x H x D)1,250 x 1,450 x 750 mm (depth less 32 mm for fan, Peltier)External dimensions (W x H x D)1,435 x 1,913 x 905 mm (depth plus 56 mm door handle and 111 mm Peltier element)Shelves maximum / in scope of delivery28 / 4Max. load unit / per shelf250 kg / 30 kgInstallationmobile and lockable, on castors, levellableConnection230 V, 50/60 Hz, approx. 1,400 WPermissible environment+16 to +40 °C, max. 70 % non-condensing, max. 2,000 m above sea levelWeight net / gross (wooden crate)approx. 347 kg / approx. 525 kgDimensions with wooden crate (W x H x D)1,560 x 2,200 x 1,190 mmMarkingsCE, UL (c-UL-us Listed), VDE GSOther sizes in the seriesThe HPPeco series comprises seven sizes from 108 to 2,140 litres, all with TwinDISPLAY:ModelInternal volumeSetting temperature without humidityHumidity rangeHPP110eco108 l0 to +70 °C10 to 90 % rhHPP260eco256 l0 to +70 °C10 to 90 % rhHPP410eco384 l0 to +70 °C10 to 90 % rhHPP750eco749 l0 to +70 °C10 to 90 % rhHPP1060eco1,060 l0 to +70 °C10 to 90 % rhHPP1400eco (this page)1,360 l0 to +70 °C10 to 80 % rhHPP2200eco2,140 l0 to +70 °C10 to 80 % rhScope of delivery1x Memmert constant climate chamber HPP1400ecoFactory calibration certificate (+25 °C / 60 % rh, +40 °C / 75 % rh)Stainless steel doors with glass cut-out, fully heated inner glass panes, fitted into full-view glass doors with 2-point locking (compression door lock)4x stainless steel grid shelf, electropolishedWater canister with connection hoseRegulatory informationThe unit is an electrical device within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Notes on returning old appliances can be found on our page Environment and disposal.Individual requirements and procurement serviceAvailable as factory options for the HPP1400eco are, among others, lateral feedthroughs with 23 mm inner diameter, a silicone feedthrough with 40 mm, a 4-20 mA current interface, security locks with key (one lock per door), a potential-free contact for fault messages, a process-dependent programmable door lock and a door-open detection (one each per door) as well as MobileALERT by SMS. Accessories are additional stainless steel grid shelves, a USB-Ethernet adapter, an Ethernet cable, the USB user ID stick, the FDA basic licence for AtmoCONTROL FDA and an external measuring device for temperature and humidity. In addition, calibrations at the factory or DAkkS (accredited), IQ/OQ documents, on-site qualifications and maintenance contracts can be requested. For individual requirements, we will advise you personally.

With 2,140 litres of interior and external dimensions of 2,157 x 1,913 x 905 mm (W x H x D), the Memmert constant climate chamber HPP2200eco is the largest of the HPPeco series. It stands in the room as a mobile, levellable floor-standing unit. Without humidity it sets 0 to +70 °C, and in humidity operation +15 to +60 °C at 10 to 80 % rh. Temperature control is via a Peltier heating/cooling system in the rear wall, without compressor and without refrigerant.Large chamber, plenty of shelf spaceThe interior measures 1,972 x 1,450 x 750 mm (W x H x D), less 32 mm depth for the fan (Peltier). Six electropolished stainless steel grid shelves are inserted, and up to 42 shelves are possible. 30 kg per shelf and 330 kg in the whole unit are permitted. The doors are stainless steel doors with glass cut-out and fully heated inner glass panes, fitted into full-view glass doors with 2-point locking (compression door lock). The unit weighs about 474 kg net and stands mobile and lockable on castors. For transport the shipping dimensions matter: with wooden crate the delivery measures 2,300 x 2,200 x 1,190 mm at approx. 718 kg, and the unit must be transported upright.Installation and connectionThe HPP2200eco is connected with 230 V, 50/60 Hz and draws approx. 2,000 W. The ambient temperature may be +16 to +40 °C, at a maximum of 70 % rel. humidity, non-condensing, and the installation altitude is up to 2,000 m above sea level. At least 15 cm are to be kept to the rear wall, 20 cm to the ceiling and 5 cm at the sides to a wall or neighbouring unit. To the unit depth are added 56 mm for the door handle and 111 mm for the Peltier element.Ranges with and without humidityWithout humidity, 0 to +70 °C can be set, and the working range begins at 0 °C (min. 20 °C below room temperature). With humidity, +15 to +60 °C apply, and the lower limit of the working range here is +15 °C (min. 10 °C below room temperature). Humidity is settable from 10 to 80 % rh, the setting accuracy is 0.5 % rh, and for temperature it is 0.1 °C. A hot steam generator humidifies, and a cold trap in Peltier technology dehumidifies. The water, distilled, comes from an external container and is delivered by a self-priming pump, and water canister and connection hose are included. As an alternative, a central water supply connected to the domestic water is available, with filter cartridges (ZWVR6) or without (ZWVR7). For ZWVR7, demineralised, fully deionised water with 5 to 10 μS/cm conductivity and a pH value between 5 and 7 applies.Control, programs and protective functionsTwo Pt100 sensors of DIN class A monitor each other in the ControlCOCKPIT TwinDISPLAY and take over the function of the other in the event of a fault. In addition there are HeatBALANCE for adjusting the heating power distribution from -50 to +50 %, SetpointWAIT and a countdown clock from 1 minute to 99 days. Programs are created with the AtmoCONTROL software and transferred via Ethernet LAN or USB. An adjustable temperature monitor of protection class 3.3 and AutoSAFETY are built in as protection, as well as a self-diagnosis system and visual and acoustic alarm. The program sequence remains saved in the event of a power failure. Three values each can be freely calibrated for temperature and humidity.Selection guide: when the HPP2200eco, when the HPP1400ecoThe HPP1400eco (1,360 l) has the same temperature and humidity ranges, up to 28 shelves, 250 kg total load and draws approx. 1,400 W. The HPP2200eco fits if more shelf positions or more load are needed. If the chamber is to run with humidity up to 90 % rh or from +5 °C, neither of the two largest chambers fits, and then the HPP1060eco with 1,060 l comes into question, the largest chamber of the series with these ranges.Typical applicationsThe HPPeco series is intended for these applications, among others:Stability studies according to ICH guidelines (Q1A)Environmental testing, materials testing and material testing in industryColour fastness testing and packaging design testsStability testing of new medicinesStability tests for cosmetics and foodTechnical detailsInternal volume2,140 lInternal dimensions (W x H x D)1,972 x 1,450 x 750 mm (depth less 32 mm for fan, Peltier)External dimensions (W x H x D)2,157 x 1,913 x 905 mm (depth plus 56 mm door handle and 111 mm Peltier element)Weight netapprox. 474 kgShipping weight and shipping dimensions (wooden crate)approx. 718 kg, 2,300 x 2,200 x 1,190 mmShelvesup to 42, of which 6 in scope of deliveryLoad330 kg in the unit, 30 kg per shelfInstallationmobile and lockable, on castors, levellableTemperature range without humiditySetting 0 to +70 °C, working range 0 °C (min. 20 °C below room temperature) to +70 °CTemperature range with humiditySetting +15 to +60 °C, working range +15 °C (min. 10 °C below room temperature) to +60 °CSetting accuracy temperature0.1 °CHumidity (setting range)10 to 80 % rh, setting accuracy 0.5 % rhHumidification and dehumidificationHot steam generator and cold trap in Peltier technologyHeating and coolingPeltier in the rear wall (heat pump principle), without compressorSensors2x Pt100, DIN class A, 4-wire measurement, mutual monitoringControllerControlCOCKPIT TwinDISPLAY, adaptive PID microprocessor controller, 2x TFT colour graphic displayElectrical connection230 V, 50/60 Hz, approx. 2,000 WAmbient conditions+16 to +40 °C, max. 70 % non-condensing, max. 2,000 m above sea levelMarkingsCE, UL (c-UL-us Listed), VDE GSOther sizes in the seriesThe HPPeco series comprises seven sizes from 108 to 2,140 litres, all with TwinDISPLAY:ModelInternal volumeSetting temperature without humidityHumidity rangeHPP110eco108 l0 to +70 °C10 to 90 % rhHPP260eco256 l0 to +70 °C10 to 90 % rhHPP410eco384 l0 to +70 °C10 to 90 % rhHPP750eco749 l0 to +70 °C10 to 90 % rhHPP1060eco1,060 l0 to +70 °C10 to 90 % rhHPP1400eco1,360 l0 to +70 °C10 to 80 % rhHPP2200eco (this page)2,140 l0 to +70 °C10 to 80 % rhScope of delivery1x Memmert constant climate chamber HPP2200ecoFactory calibration certificate (+25 °C / 60 % rh, +40 °C / 75 % rh)Stainless steel doors with glass cut-out, fully heated inner glass panes, fitted into full-view glass doors with 2-point locking (compression door lock)6x stainless steel grid shelf, electropolishedWater canister with connection hoseRegulatory informationThe unit is an electrical device within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Notes on returning old appliances can be found on our page Environment and disposal.Individual requirements and procurement serviceAvailable as factory options for the HPP2200eco are, among others, lateral feedthroughs with 23 mm inner diameter, a silicone feedthrough with 40 mm, a 4-20 mA current interface, three security locks with key (one lock per door), a potential-free contact for fault messages, three process-dependent programmable door locks and three door-open detections (one each per door) as well as MobileALERT by SMS. Accessories include stainless steel grid shelves, a USB-Ethernet adapter, an Ethernet cable, the USB user ID stick, the FDA basic licence for AtmoCONTROL FDA and an external measuring device for temperature and humidity. Calibrations at the factory or DAkkS (accredited), IQ/OQ documents, on-site qualifications and maintenance contracts can be requested. For individual requirements, we will advise you personally.