IKA S 25 EC - T - C - 25 G - ST Dispersing Tool, Ø 25 mm, Temperature Sensor, easy to clean, 0025002595
€1,555.50
% Manufacturer's RRP: €2,074.00 25% below manufacturer's RRP
- Integrated temperature sensor, measuring range 0 to 125 °C
- Operating hours recording with maintenance reminder on the actuator display
- Easy-clean design, ceramic plain bearings, AISI 316L and ceramic
- Stator 25 mm, rotor 20 mm, operating range 0.05 to 2 l
- Final fineness 15 to 50 µm (suspensions), 1 to 10 µm (emulsions)
- Suitable for solvents and abrasive substances, autoclavable
Product information "IKA S 25 EC - T - C - 25 G - ST Dispersing Tool, Ø 25 mm, Temperature Sensor, easy to clean, 0025002595"
IKA cites dispersing applications in biochemistry and pharmaceuticals as typical uses for the S 25 EC - T - C - 25 G - ST (0025002595), such as the emulsification of heat-sensitive pharmaceutical intermediates. The autoclavable tool has a 25 mm stator and a 20 mm rotor, processes volumes of 0.05 to 2 l and incorporates a temperature sensor.
Temperature and operating hours
The integrated sensor measures from 0 to 125 °C and displays the value during operation. The drive keeps track of operating hours; a message appears on the display when maintenance is due. IKA specifies the T 25 easy clean control as the drive. The maximum operating temperature of the unit is 120 °C.
Cleaning according to the ‘easy-clean’ principle
When the clamp is turned and lowered, the shaft and rotor drop out until the rotor has completely left the stator. The shaft tube can then also be rinsed internally. The shaft runs in a ceramic plain bearing; the parts in contact with the product are made of AISI 316L and ceramic.
Gap, fineness and dimensions
The gap is 0.5 mm; at 25,000 rpm, a speed of 26.2 m/s is achieved at the rotor circumference. The final fineness ranges from 15 to 50 µm for suspensions and from 1 to 10 µm for emulsions. The tool has a plunge depth of 45 to 150 mm, is 191 mm long, weighs 0.634 kg and is suitable for solvents and abrasive materials.
Typical applications
- Dispersion in biochemistry and pharmaceuticals, including heat-sensitive intermediates
- Batches of 0.05 to 2 l with temperature measurement
- Emulsions with final particle sizes of 1 to 10 µm
- Samples containing abrasive components
- Work involving solvents
- Sample series with maintenance instructions based on operating hours
Technical details
| Processable volume (H2O) | 0.05 to 2 l |
| Stator diameter | 25 mm |
| Rotor diameter | 20 mm |
| Stator/rotor gap width | 0.5 mm |
| Max. permissible speed | 25,000 rpm |
| Maximum circumferential speed | 26.2 m/s |
| Penetration depth | 45 to 150 mm |
| Installation length | 191 mm |
| Bearing type | Ceramic plain bearing |
| Materials in contact with the product | AISI 316L, ceramic |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Suitable for abrasive substances | Yes |
| Temperature measurement range | 0 to 125 °C |
| Max. operating temperature | 120 °C |
| Sterilisability | all methods except hot air |
| Final particle size of suspensions | 15 to 50 µm |
| Final particle size of emulsions | 1 to 10 µm |
| Weight | 0.634 kg |
Scope of delivery
- 1 x IKA S 25 EC - T - C - 25 G - ST dispersing tool (single tool)
- The T 25 easy clean control drive is not included in the Scope of delivery.
With and without a sensor
The S 25 EC - C - 25 G - ST has the same geometry but without a temperature sensor; its operating temperature is 180 °C and it has an immersion depth of 35 to 150 mm. The S 25 EC - T - C - 25 G operates with a sensor, but features a 17 mm rotor and a speed of 22.2 m/s. Those requiring an 18 mm rotor and particle sizes of 1 to 5 µm for emulsions will find this in the S 25 EC - T - C - 25 F.
Individual requirements and procurement service
LT Laborhandel can supply the T 25 easy clean control drive and other tools on request. The procurement service assists with selection.
Matching accessories
The “easy clean” concept taken to its logical conclusion: IKA HS 25 EC – DW Holder IKA’s “easy clean” (EC) dispersing tools are revolutionary, as they can be thoroughly cleaned without the need to laboriously dismantle the tool into its individual parts. The IKA HS 25 EC – DW Holder (MPN 0025007380) is the essential accessory for making the most of this advantage in day-to-day laboratory work. The abbreviation ‘DW’ stands for ‘Dish Washer’ (laboratory dishwasher). Reliable cleaning without manual effort With this special holder, you can clean your valuable S 25 EC dispersing tools safely, conveniently and, above all, by machine. Stable positioning: The holder secures the dispersing tool firmly and upright in the washing basket of your laboratory dishwasher. Protection against damage: The delicate tool can no longer tip over due to water pressure, does not slip through the mesh of the washing basket and does not knock against other laboratory vessels. The machine’s spray arm is also not blocked. Optimal rinsing: Thanks to the precisely calculated, upright positioning, the hot water and detergent mixture can flow optimally from bottom to top through the shaft and the rotor-stator gap. Maximum time savings: After sample preparation, simply place the tool into the holder in the dishwasher. There is no need for time-consuming manual scrubbing under running water. Compatibility This holder has been designed exclusively for the current generation of S 25 easy clean dispersing tools (e.g. S 25 EC-C-18G-ST, S 25 EC-T-C-25G, etc.), which are used in combination with the T 25 easy clean (digital and control) drives. (Note: This holder is not intended for use with classic IKA standard tools, which must be completely dismantled for cleaning). Technical data Model: HS 25 EC - DW Holder Product type: Dishwasher holder Compatible tools: IKA S 25 EC (easy clean) series Purpose: Secure, upright positioning of the instrument in the dishwasher basket Durability: Designed to withstand the high temperatures and aggressive cleaning agents found in professional laboratory dishwashers. Contents 1 x IKA HS 25 EC - DW Holder (Note: Dispersing tools and dish racks are not included!) Individual requirements & accessories Do you use the “easy clean” tools with integrated temperature measurement (models with a “T” in their name)? These can also be washed using the DW Holder. We’d be happy to advise you on the ideal combination of drive and tool for your samples. Please contact our procurement service.