Memmert IF750plus Incubator, 749 L, TwinDISPLAY & forced-air circulation, on castors

The Memmert IF750plus is a top-of-the-range, mobile, large-capacity incubator with forced air circulation (convection). With an enormous chamber volume of 749 litres, this model offers maximum capacity for laboratories handling very high sample volumes. Thanks to the standard lockable castors, this large unit remains mobile and can be positioned flexibly within the laboratory.

High-end control system: ControlCOCKPIT with TwinDISPLAY

The “plus” model features the adaptive TwinDISPLAY with two high-resolution TFT colour graphic displays (touchscreens). This not only allows for the intuitive adjustment of all parameters, but also offers exclusive functions such as HeatBALANCE. This enables the heating power distribution between the top and bottom to be individually adjusted (-50% to +50%) to perfectly meet specific temperature requirements.

Maximum safety & sterilisation

The IF750plus guarantees dual safety through two Pt100 temperature sensors (DIN Class A), which monitor each other and take over operation in the event of a fault (AutoSAFETY). For hygiene-critical applications, a fixed sterilisation programme is integrated, which reliably sterilises the interior (without a load) at +160 °C for 4 hours.

Uniform Temperature Distribution & Double-Leaf Doors

Two quiet air turbines ensure rapid and even heat distribution throughout the entire stainless steel interior. The fan speed and the fresh air supply can be precisely adjusted in 10% increments. The double-leaf stainless steel doors (with inner glass doors) allow convenient access to the spacious interior.

Technical details

• Model: Memmert IF750plus (2012 generation)
• Capacity: 749 litres
• Convection type: Forced air circulation (convection) via 2 air turbines
• Temperature setting range: +20 °C to +80 °C
• Operating temperature range: At least 10 °C above room temperature to +80 °C
• Setting accuracy: 0.1 °C
• Control: TwinDISPLAY (2x TFT touchscreen)
• Temperature sensors: 2x Pt100 sensors, DIN Class A (4-wire measurement)
• Sterilisation: Integrated programme (4 hours / 160 °C) for internal sterilisation
• Functions: HeatBALANCE, SetpointWAIT, AtmoCONTROL
• Interior: Stainless steel (grade 1.4301), deep-drawn ribbing
• Outer casing: Textured stainless steel sheet, galvanised rear panel
• Internal dimensions (W x H x D): 1040 x 1200 x 600 mm (depth minus 39 mm for fan)
• External dimensions (W x H x D): 1224 x 1720 x 784 mm (depth excluding door handle, +56 mm for handle)
• Installation: Mobile on lockable castors
• Doors: Double-leaf (stainless steel exterior, glass interior)
• Load capacity: Max. 300 kg total / max. 30 kg per shelf
• Shelves: 2 stainless steel wire shelves included, max. 14 possible
• Interfaces: Ethernet LAN, USB
• Voltage / Power: 230 V, 50/60 Hz / approx. 2000 W
• Net weight: approx. 217 kg

Contents of delivery

• Memmert IF750plus incubator (basic unit on castors)
• 2 x stainless steel wire shelves (electropolished)
• 1 x factory calibration certificate (at +37 °C)
• 1 x USB stick with AtmoCONTROL software
• 1 x mains cable
• Operating instructions

Customised requirements & procurement service

Do you require additional stainless steel grating (up to 14 available), reinforced grating for heavy loads or a feed-through for external sensors? We will configure your Memmert incubator precisely to your laboratory requirements. Make use of our bespoke procurement service for accessories and special requests.