Memmert IN30plus incubator, 32 l, +20 to +80 °C, TwinDISPLAY
€1,766.00
Delivery time: 2-3 weeks
- 32-litre internal capacity, the smallest model in the IN-plus range
- ControlCOCKPIT TwinDISPLAY with 2 Pt100 sensors
- Setting range +20 to +80 °C, setting accuracy 0.1 °C
- AutoSAFETY over/under-temperature monitoring with alarm
- Permanently installed sterilisation programme (4 hours at 160 °C) for the interior
- Factory calibration certificate at +37 °C included
Product information "Memmert IN30plus incubator, 32 l, +20 to +80 °C, TwinDISPLAY"
With a capacity of 32 litres, the IN30plus is the smallest model in the IN-plus series and comes with one stainless steel grid shelf as standard and holds up to three. Two Pt100 sensors monitor each other and take over the function of the other in the event of a fault. Temperature control is provided within the range of +20 to +80 °C with a setting accuracy of 0.1 °C via a ControlCOCKPIT TwinDISPLAY featuring two TFT colour graphic displays.
Compact housing with TwinDISPLAY
Natural convection mixes in preheated fresh air via an electronically adjustable exhaust air damper; the exhaust air outlet with throttle valve is electronically controllable. The interior features deep-drawn ribbing with 4-sided all-round heating, whilst the housing has a fully galvanised sheet steel rear panel. A model of the same size with forced air circulation instead of natural convection is available in the IF-plus series.
Two sensors, one controller
Unlike the other models in the IN-plus series, from the IN55plus to the IN750plus, the IN30plus does not have the HeatBALANCE function for distributing heating output. Programmes are programmed, managed and transferred via Ethernet or USB using the AtmoCONTROL software; SetpointWAIT only starts the process time once the setpoint temperature has been reached.
Temperature monitoring and sterilisation programme
A mechanical temperature limiter of protection class 1 according to DIN 12880 forms the first level of protection and cuts off at approximately 20 °C above the maximum cabinet temperature. Additionally, an adjustable temperature monitor (Protection Class 3.1) or an adjustable temperature limiter (Protection Class 2) can be selected; AutoSAFETY tracks the setpoint at a freely selectable interval and signals deviations visually and acoustically. A permanently installed sterilisation programme of 4 hours at 160 °C sterilises the interior, not the load.
Selection guide for the right size
With a capacity of 32 litres and a maximum of three shelves, the IN30plus is designed for small sample quantities and a compact footprint. If more volume is required, the table below lists the IN55plus with 53 litres, four shelves and the additional HeatBALANCE function.
Typical applications
With a capacity of 32 litres, the IN30plus is suitable for incubating and temperature-controlling small sample volumes in the range from +20 to +80 °C, including in research applications.
- Incubation and temperature control of small sample series with redundant sensor monitoring
- Interior sterilisation via the permanently installed sterilisation programme
- Use in research
Technical details
| Setting temperature range | +20 to +80 °C |
| Working temperature range | At least 5 °C above room temperature up to +80 °C |
| Temperature setting accuracy | 0.1 °C |
| Temperature sensor | 2 Pt100 sensors, DIN Class A, in a 4-wire configuration for mutual monitoring and automatic failover in the event of a fault |
| Adjustable temperature monitor/limiter | Adjustable temperature monitor (TWW), protection class 3.1, or adjustable temperature limiter (TWB), protection class 2, selectable via the display |
| AutoSAFETY | additionally integrated over- and under-temperature monitoring ‘ASF’, automatically tracks the setpoint at a freely selectable interval, alarm if the temperature exceeds or falls below the setpoint, heating shut-off if the setpoint is exceeded |
| Sterilisation programme | Permanently installed sterilisation programme (4 hours/160 °C) for sterilising the interior; not intended for sterilising the load |
| Internal volume | 32 l |
| Internal dimensions (W x H x D) | 400 x 320 x 250 mm |
| External dimensions of housing (W x H x D) | 585 x 704 x 434 mm (depth plus 56 mm for door handle) |
| Net weight | approx. 48 kg |
| Connected load 230 V | 50/60 Hz, approx. 1,600 W |
| Connected load 115 V | 50/60 Hz, approx. 800 W |
| Maximum number of shelves | 3 |
| Shelves included in scope of delivery | 1 |
| Interior | Easy to clean, reinforced with deep-drawn ribbing, with protected, integrated 4-sided all-round heating |
| Control | ControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic displays |
| Permissible ambient temperature | +5 °C to +40 °C |
| Permissible relative humidity | max. 80 % non-condensing |
| Maximum installation altitude | max. 2,000 m above sea level |
| Markings | CE, VDE GS, UL, EAC |
Other sizes in the series
The IN-plus series with TwinDISPLAY ranges from 32 to 749 litres internal volume, sorted by internal volume:
| Model | Internal volume | Set temperature | Display |
|---|---|---|---|
| IN30plus (this page) | 32 l | +20 to +80 °C | TwinDISPLAY |
| IN55plus | 53 l | +20 to +80 °C | TwinDISPLAY |
| IN75plus | 74 l | +20 to +80 °C | TwinDISPLAY |
| IN110plus | 108 l | +20 to +80 °C | TwinDISPLAY |
| IN160plus | 161 l | +20 to +80 °C | TwinDISPLAY |
| IN260plus | 256 l | +20 to +80 °C | TwinDISPLAY |
| IN450plus | 449 l | +20 to +80 °C | TwinDISPLAY |
| IN750plus | 749 l | +20 to +80 °C | TwinDISPLAY |
The same capacity is also available with SingleDISPLAY and a Pt100 sensor in the IN series: IN30.
Scope of delivery
- 1x Memmert IN30plus incubator
- Factory calibration certificate (calibrated at +37 °C)
- Fully insulated stainless steel door with 2-point locking (compression door lock)
- Inner glass door
- 1x stainless steel grid shelf, electropolished
Regulatory information
This appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on the return of old appliances can be found on our Environment and Disposal page.
Individual requirements and procurement service
Options that can be ordered ex-works for the IN30plus include the 115 V voltage at no extra charge, interior lighting, an interior socket and a door-open detection sensor. Optional accessories include a USB User ID stick, a wall bracket, a USB-to-Ethernet adapter and AtmoCONTROL software licences. We arrange calibration and IQ/OQ services for qualification and requalification. We are available to assist you personally with bespoke configurations.
| Volume: | 32 l |
|---|