Skip to main content Skip to search Skip to main navigation

Memmert universal oven UN55m, 53 l, +20 to +300 °C, SingleDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert universal oven UN55m, 53 l, +20 to +300 °C, SingleDISPLAY"

With 53 litres of internal volume, the Memmert universal oven UN55m is one size above the smallest model in the series. As a Class I medical device under Regulation (EU) 2017/745, it is used for heating and keeping warm fango, silicate and APS packs in physiotherapy. The internal dimensions of 400 x 400 x 330 mm offer more usable height than the UN30m, and one stainless steel grid shelf is included as standard.

Equipment at a glance

  • ControlCOCKPIT SingleDISPLAY, PID microprocessor controller with TFT colour graphic display
  • 1x Pt100 sensor, DIN class A, 4-wire measurement
  • Setting accuracy 0.1 °C up to 99.9 °C, 0.5 °C from 100 °C
  • Digital countdown timer, 1 minute to 99 days, with SetpointWAIT function
  • Electronically adjustable exhaust air flap with admixture of pre-heated fresh air
  • Storage of the program sequence in the event of a power failure, read-out via Ethernet

Natural convection

The UN55m ventilates without a forced air circulation fan, unlike the UF-m model of the same size, which has an electronically adjustable forced air circulation turbine. The exhaust air port is equipped with an electronically adjustable throttle valve, and three freely selectable temperature values can be calibrated.

Safety and self-diagnosis

At approx. 20 °C above the maximum cabinet temperature, the mechanical temperature limiter TB of protection class 1 according to DIN 12880 switches the heating off, and an adjustable electronic temperature monitor runs in parallel. Faults are reported by a self-diagnosis system. The interior is made of easy-care stainless steel stiffened by deep-drawn ribbing with protected, integrated 4-sided all-round heating, and the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel.

Loading, connection and dimensions

A total load of 80 kg is permitted at 20 kg per shelf, and up to four shelves fit in the housing. The UN55m is connected at 230 V with approx. 2,000 W or at 115 V with approx. 1,700 W, in each case 50/60 Hz. The external dimensions are 585 x 784 x 514 mm and the net weight is approx. 57 kg. Packed, the unit weighs approx. 76 kg, with packaging dimensions of 730 x 950 x 670 mm.

Difference from the laboratory oven

Without a medical intended purpose, such as for drying and annealing in laboratories and industry, we offer the same chamber volume as the Memmert universal oven UN55. In the medical device line, the UN55m is also available as the UN55mplus with two displays for control.

Selection guide

If 53 litres are not enough, the UN75m follows with 74 litres, six shelves and 120 kg total load. For a more compact footprint, the UN30m is suitable, with 32 litres, three shelves and 60 kg total load.

Typical applications

  • Heating fango packs in physiotherapy
  • Heating and keeping warm silicate packs
  • Heating and keeping warm APS packs

Technical details

Setting temperature range+20 to +300 °C
Working temperature rangemin. 5 °C above room temperature to +300 °C
Temperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Temperature sensor1x Pt100, DIN class A, 4-wire measurement
Internal volume53 l
Internal dimensions (W x H x D)400 x 400 x 330 mm
External dimensions of housing (W x H x D)585 x 784 x 514 mm (D +56 mm door handle)
Net weightapprox. 57 kg
Connection230 V, 50/60 Hz, approx. 2,000 W; 115 V, 50/60 Hz, approx. 1,700 W
Shelves in scope of delivery1
Shelves, maximum4
Max. load, unit80 kg
Max. load per shelf20 kg
ControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller with TFT colour graphic display
Medical device classificationClass I under Regulation (EU) 2017/745
Intended purposeHeating/keeping warm of fango, silicate and APS packs in physiotherapy
Permissible ambient temperature+5 °C to +40 °C
Permissible humiditymax. 80 % rel., non-condensing
MarkingsCE, VDE, UL

Other sizes in the series

The UN55m is one of eight sizes in the UN-m series between 32 and 749 litres, all with SingleDISPLAY and the setting temperature range +20 to +300 °C.

ModelInternal volumeSetting temperatureDisplay
UN30m32 l+20 to +300 °CSingleDISPLAY
UN55m (this page)53 l+20 to +300 °CSingleDISPLAY
UN75m74 l+20 to +300 °CSingleDISPLAY
UN110m108 l+20 to +300 °CSingleDISPLAY
UN160m161 l+20 to +300 °CSingleDISPLAY
UN260m256 l+20 to +300 °CSingleDISPLAY
UN450m449 l+20 to +300 °CSingleDISPLAY
UN750m749 l+20 to +300 °CSingleDISPLAY

Scope of delivery

  • 1x Memmert universal oven UN55m
  • Factory calibration certificate (calibration at 160 °C)
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • 1x stainless steel grid shelf, electropolished

Regulatory information

The device is electrical equipment within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on the return of old appliances can be found on our page Environment and disposal. The UN55m is also classified as a Class I medical device under Regulation (EU) 2017/745, with the intended purpose of heating and keeping warm fango, silicate and APS packs in physiotherapy.

Individual requirements and procurement service

For the UN55m, Memmert lists various options and accessories, such as a further voltage variant. Call us if you have questions about suitable equipment, and we will advise you individually. As factory options, Memmert also offers DAkkS calibration according to DKD-R 5-7, IQ/OQ documents and IQ/OQ qualification. We order these with the device on request.

Volume: 53 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20164 for sizes 50, 55 and 75
Manufacturer number: E20164

The E20164 stainless steel grid is an electropolished shelf for Memmert cabinets in sizes 50, 55 and 75. It fits universal ovens, incubators, Peltier cooling incubators and the HCP50 humidity chamber, 37 models in total. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The load per shelf is 20 kg for all models, only for the HCP50 it is 15 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Suitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf. The HCP50 comes with a perforated shelf as standard, the grid is optional there.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)UF551420UF55plus1420UN551420UN55plus1420UF752620UF75plus2620UN752620UN75plus2620UF55m1420UF55mplus1420UN55m1420UN55mplus1420UF75m2620UF75mplus2620UN75m2620UN75mplus2620UN55pa1420UN75pa2620IF551420IF55plus1420IN551420IN55plus1420IF752620IF75plus2620IN752620IN75plus2620IF55m1420IF55mplus1420IN55m1420IN55mplus1420IF75m2620IF75mplus2620IN75m2620IN75mplus2620IPP551420IPP55plus1420HCP501 (perforated shelf)515The permissible total load of the unit also limits the loading. Please observe the information in the data sheet of the unit.Scope of delivery1 stainless steel grid, electropolished (E20164)

Manufacturer's RRP: €65.36
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768

The B29768 set of levelling feet contains 4 pieces. It is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. With levelling feet, the unit can be aligned horizontally. The table of compatible models shows which series are available in which sizes.Suitable forModelSizeUF3030IF110110UN260plus260UN3030UF30plus30UN30plus30UF5555UF55plus55UN5555UN260260UN55plus55UF7575UF75plus75UN75plus75IN110plus110UN7575UF110110UN110pa110UN75pa75UN160pa160IF30plus30IN30plus30IF3030IN3030IF160160IN160160IF260plus260IN260plus260IF260260IF55plus55IN260260IF110plus110UN30pa30IN55plus55IF5555IN5555IN75plus75IF75plus75IF160plus160IN160plus160UN55pa55UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160UF260260UF260plus260IPP5555IN110110IN7575IF7575IPP55plus55IPP110eco110IPP3030IPP110ecoplus110IPP30plus30IPP260eco260IPP260ecoPlus260HPP110eco110HPP260eco260IN30m30IN30mplus30IF30m30IF30mplus30IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160IN260m260IN260mplus260IF260m260IF260mplus260UN30m30UN30mplus30UF30m30UF30mplus30UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160UN260m260UN260mplus260UF260m260UF260mplus260UF160TS160UF260TS260Scope of delivery1 set of levelling feet (4 pieces)

Manufacturer's RRP: €46.44
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
Manufacturer number: B29744

The B29744 stacking kit consists of 4 pieces and is intended for stacking units of the same size. It is designed for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco, HCP and IFbw series in sizes 30, 50, 55, 75, 105 and 110. Separate stacking kits are available for HCP150, HCP240 and ICO50, ICO180 and ICO240 (B42114, B48129, B68362 and B64732). The table of compatible models shows which series are available in which sizes.Suitable forModelSizeIF110bw110UF3030IF110110UN3030UF30plus30UN30plus30UF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75IN110plus110UN7575UF110110UN110pa110UN75pa75IF30plus30IN30plus30IF3030IN3030IF55plus55IF110plus110UN30pa30IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55UF110plus110UN110110UN110plus110IPP5555IN110110IN7575IF7575IPP55plus55IPP110eco110IPP3030IPP110ecoplus110IPP30plus30HPP110eco110HCP5050HCP105105IN30m30IN30mplus30IF30m30IF30mplus30IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75IN110m110IN110mplus110IF110m110IF110mplus110UN30m30UN30mplus30UF30m30UF30mplus30UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75UN110m110UN110mplus110UF110m110UF110mplus110Scope of delivery1 stacking kit (4 pieces)

Manufacturer's RRP: €61.92
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02072 for sizes 55 and 75
Manufacturer number: B02072

The stainless steel slide-in drip tray B02072 is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 1.5 kg per slide-in drip tray. According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeUF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75UN7575UN75pa75IF55plus55IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55IPP5555IN7575IF7575IPP55plus55IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75Scope of delivery1 stainless steel slide-in drip tray, 15 mm rim

Manufacturer's RRP: €74.82
memmert untergestell nivellierbar
Memmert levelling base frame B29747, height 600 mm, for sizes 55 and 75
Manufacturer number: B29747

B29747 is a levelling base frame with a height of 600 mm for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. A flat base frame with a height of 130 mm is available as B33659. The mobile version with a height of 660 mm is available as B29748. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeUF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75UN7575UN75pa75IF55plus55IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55IPP5555IN7575IF7575IPP55plus55IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75Scope of delivery1 levelling base frame, height 600 mm

Manufacturer's RRP: €300.14
Memmert levelling base frame B33659, height 130 mm, for sizes 55 and 75
Manufacturer number: B33659

The levelling base frame B33659, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The base frame B29747 with a height of 600 mm is also available for these sizes. The table of compatible models shows which series are available in which sizes.Suitable forModelSizeUF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75UN7575UN75pa75IF55plus55IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55IPP5555IN7575IF7575IPP55plus55IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75Scope of delivery1 levelling base frame, height 130 mm

Manufacturer's RRP: €233.06
memmert untergestell fahrbar
Memmert mobile base frame B29748, height 660 mm, for sizes 55 and 75
Manufacturer number: B29748

The mobile base frame B29748 is 660 mm high. It is designed for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The levelling version with a height of 600 mm is available as B29747, a flat base frame with a height of 130 mm as B33659. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeUF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75UN7575UN75pa75IF55plus55IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55IPP5555IN7575IF7575IPP55plus55IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75Scope of delivery1 mobile base frame, height 660 mm

Manufacturer's RRP: €444.62
Memmert stainless steel perforated tray B68507 for sizes 55 and 75
Manufacturer number: B68507

B68507 is a stainless steel perforated tray for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. Memmert specifies 20 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series are available in which sizes.Suitable forModelSizeUF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75UN7575UN75pa75IF55plus55IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55IPP5555IN7575IF7575IPP55plus55IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75Scope of delivery1 stainless steel perforated tray

Manufacturer's RRP: €120.40
memmert boden abtropfschale
Memmert stainless steel base drip tray B04358 for sizes 55 and 75
Manufacturer number: B04358

B04358 is a stainless steel base drip tray with a 15 mm rim for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It collects dripping liquid. According to Memmert, the maximum load is 1.5 kg per base drip tray. Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeUF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75UN7575UN75pa75IF55plus55IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55IPP5555IN7575IF7575IPP55plus55IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75Scope of delivery1 stainless steel base drip tray, 15 mm rim

Manufacturer's RRP: €115.24