Memmert
Memmert Temperierschränke & Brutschränke
Memmert steht für präzise Temperiertechnik im Labor. Ob Brutschränke, Klimaschränke, Trockenschränke oder Wasserbäder – Memmert Geräte überzeugen durch Zuverlässigkeit, Sicherheit und maximale Temperaturkonstanz. Entwickelt und gefertigt in Deutschland, garantieren sie reproduzierbare Ergebnisse in Forschung, Medizin und Industrie.
Memmert UN30 universal cabinet (32 L) with natural convection, up to +300 °C
Precise temperature control in a compact space The Memmert UN30 is the classic drying oven for laboratory applications which demand the highest precision and reliability. With a chamber volume of 32 litres and a temperature range up to +300 °C, it is ideally suited to drying processes, firing, ageing or tempering of smaller batches. Thanks to natural convection (without forced air circulation), heat transfer is particularly gentle. This prevents fine powders from being stirred up or sensitive samples from drying out due to strong air currents. Intuitive operation with SingleDISPLAY At the heart of the instrument is the high-resolution TFT touchscreen display (SingleDISPLAY). It enables intuitive setting of temperature, programme durations and the air damper control. The ‘SetpointWAIT’ function ensures reliable operation: The process time only starts running once the setpoint temperature inside the chamber has actually been reached. This ensures that results can be validated. Hygienic and durable Like all Memmert units, the UN30 stands out thanks to its unique textured stainless steel. Both the housing and the interior are made of high-quality stainless steel (grade 1.4301), which is scratch-resistant, robust and extremely easy to clean. The fully insulated stainless steel door with a 2-point locking mechanism ensures optimum thermal insulation and energy efficiency. Technical details Capacity: 32 litres Temperature range: Room temperature +5 °C to +300 °C Convection: Natural convection (silent, no turbulence) Display: SingleDISPLAY (TFT colour display) Interior: Stainless steel (1.4301), deep-drawn Internal dimensions (W x H x D): 400 x 320 x 250 mm External dimensions (W x H x D): 585 x 704 x 434 mm Max. total load: 60 kg Voltage: 230 V, 50/60 Hz Power consumption: approx. 1,600 W Safety: Temperature limiter (mechanical) & electronic monitoring Interface: Ethernet (for AtmoCONTROL software) Contents of delivery Memmert UN30 universal cabinet 1 x stainless steel grating (electropolished) Factory calibration certificate (at +160 °C) Mains lead Operating instructions Customised requirements & procurement service Do you require additional insert plates, the AtmoCONTROL software on a USB stick, or the model with forced convection (UF30)? We’ll configure your heating cabinet exactly to your specifications. Please contact our procurement service for accessories and upgrades.
Memmert IN30 incubator (32 L) with natural convection, up to +80 °C
Gentle incubation through natural convection The Memmert IN30 is the ideal incubator for microbiological applications, which require particularly precise temperature control without air turbulence. As it operates using natural convection (without a fan), the risk of culture media drying out is minimised – perfect for incubating bacterial cultures, fungi or insects. With a 32-litre capacity, it offers compact space for your Petri dishes and sample containers at temperatures up to +80 °C. Double-door design for stable heat To prevent temperature fluctuations when viewing the samples, the IN30 features an intelligent double-door system: The inner glass door allows visual monitoring of the incubated samples, without allowing heat to escape. The outer, fully insulated stainless steel door ensures optimum thermal insulation. This design guarantees extremely high temperature stability and uniform heat distribution within the chamber. Hygiene and precision in everyday laboratory work Operation is via the intuitive ControlCOCKPIT with SingleDISPLAY (touchscreen). Functions such as ‘SetpointWAIT’ ensure that the process time only starts once the target temperature has been reached – essential for validatable results. The interior is made of high-quality, stainless steel (1.4301) is deep-drawn, making it easy to clean and disinfect, which supports the highest hygiene standards. Technical details Capacity: 32 litres Temperature range: Room temperature +5 °C to +80 °C Convection: Natural convection (silent, minimises drying out) Display: SingleDISPLAY (TFT colour display) Door design: Inner glass door, outer stainless steel door Interior: Stainless steel (1.4301), reinforced ribbing Internal dimensions (W x H x D): 400 x 320 x 250 mm External dimensions (W x H x D): 585 x 704 x 434 mm Max. total load: 60 kg Voltage: 230 V, 50/60 Hz Power consumption: approx. 1,600 W Interface: Ethernet Contents of delivery Memmert IN30 incubator 1 x stainless steel wire shelf (electropolished) Factory calibration certificate (standard at +37 °C) Mains lead Operating instructions Customised requirements & procurement service Do you require the forced-air version (IF30) for faster heating times, the TwinDISPLAY version (IN30plus) for complex temperature ramps or additional perforated trays? We’ll customise your incubator to your specifications. Please contact our procurement service
Memmert UF160 universal oven (161 L) with forced convection, up to +300 °C
Memmert UF160 Universal Oven: The benchmark for thermal processes The Memmert UF160 is a high-precision heating cabinet with a 161-litre usable volume. Thanks to its powerful, adjustable forced convection system, it guarantees excellent temperature distribution and fast drying times across the entire temperature range up to +300 °C. Maximum precision and homogeneity The ‘UF’ system (Universal + Forced convection) ensures rapid heat transfer to the sample. Excellent homogeneity is achieved even when the chamber is fully loaded. The fan speed is digitally adjustable to optimally adapt the process to sensitive test specimens and ensure gentle drying. Versatile laboratory applications Whether for demanding material testing, the tempering of components, the drying of samples or the sterilisation of glassware – the UF160 is designed as a robust ‘all-rounder’ for continuous operation in industrial and research laboratories. Intuitive control (SingleDISPLAY) Equipped with the Memmert SingleDISPLAY cockpit and AtmoCONTROL software, temperature, fan speed and programmes can be easily adjusted. The integrated logging function supports your quality assurance. Configure your Memmert UF160 now or request a quote from our team of experts.
Memmert UN110 universal cabinet (108 L) with natural convection, up to +300 °C
Memmert UN110 Universal Cabinet: Gentle and silent temperature control The Memmert UN110 is a versatile heating cabinet with a 108-litre usable volume that operates via natural convection (fanless). It is the ideal solution for sensitive samples and quiet laboratory environments that require precise temperature control up to +300 °C. Gentle heating through natural convection The ‘UN’ system (Universal + Natural convection) operates entirely without a fan. Heat circulation is purely thermal, guaranteeing completely silent operation. This principle protects light sample materials (e.g. powders, films) from turbulence and prevents the samples from drying out too quickly. Main applications of the UN110 This oven is a reliable standard for many laboratory applications: Gentle drying of laboratory glassware or powders Tempering of components and plastics Long-term heat retention of samples in continuous operation Simple control (SingleDISPLAY) Temperature and programmes (ramps) can be set intuitively via the SingleDISPLAY control panel. The AtmoCONTROL software (via USB interface) enables straightforward logging of process data to support your quality assurance. Do you need advice on the Memmert UN110 or accessories such as additional shelf grids? Please contact our specialist staff.
Memmert SF260 Hot-Air Steriliser, 256 L, Class IIb medical device
Reliable sterilisation for hospitals, medical practices and laboratories The Memmert SF260 hot-air steriliser is a Class IIb medical device (in accordance with MDD 93/42/EEC) designed for the sterilisation of medical materials using dry heat at atmospheric pressure. With an internal capacity of 256 litres and a temperature range of +20 °C to +250 °C, the unit is suitable for hospitals, medical practices and laboratories that need to sterilise large quantities of instruments and containers reliably and with full documentation. Precise temperature control with SetpointWAIT A Pt100 sensor using the 4-wire measurement method (DIN Class A) measures the temperature with an accuracy of ±0.1 °C up to 99.9 °C and ±0.5 °C from 100 °C onwards. The SetpointWAIT function only starts the sterilisation time once the setpoint temperature has actually been reached – ensuring validatable, reproducible cycles. An electronically controlled turbine circulates the air in adjustable 10 per cent increments, whilst electronically controlled fresh air and exhaust air dampers ensure controlled air exchange. Robust construction and safety The interior is made of stainless steel with deep-drawn ribbing and is heated on all four sides; the fully insulated stainless steel door locks via a two-point compression lock. For safety, the unit monitors the temperature electronically and additionally via a mechanical temperature limiter (DIN 12880 Class 1), which triggers at around 20 °C above the maximum temperature. An integrated self-diagnostic system automatically detects faults. Operation, interfaces and documentation The SF260 is controlled via the ControlCOCKPIT SingleDISPLAY: an adaptive digital PID microprocessor controller with a high-resolution TFT colour graphic display and a digital timer (1 minute to 99 days). Log data can be read out and archived via the Ethernet interface or using a USB stick with AtmoCOCKPIT software – the programme sequence remains stored even after a power cut. This significantly simplifies documentation for quality management. Scope of delivery 1x Memmert SF260 hot-air steriliser (basic unit) 2x stainless steel wire racks (electropolished) 1x factory calibration certificate (at +160 °C) Technical details Internal capacity256 litres Internal dimensions (W×H×D)640 × 800 × 500 mm External dimensions (W×H×D)824 × 1183 × 684 mm (+56 mm depth for door handle) Temperature range+20 °C to +250 °C Temperature accuracy±0.1 °C (up to 99.9 °C) / ±0.5 °C (from 100 °C) Sensor technologyPt100, 4-wire measurement method, DIN Class A VentilationElectronically controlled recirculation fan, adjustable in 10% increments Fresh air/exhaust airElectronically controlled fresh air and extract air dampers ControlControlCOCKPIT SingleDISPLAY, TFT colour graphic display, digital PID microprocessor controller TimerDigital, 1 minute to 99 days Safety functionSetpointWAIT (start only once the setpoint temperature has been reached) Temperature monitoringElectronic + mechanical temperature limiter (DIN 12880 Class 1), approx. 20 °C above maximum temperature Interior materialStainless steel with deep-drawn ribbing, 4-sided circulation heating DoorFully insulated stainless steel door, 2-point compression lock Rear panel of the housingGalvanised sheet steel Max. load300 kg in total / 20 kg per shelf Max. number of shelves9 InterfacesEthernet, USB (with AtmoCOCKPIT software) Voltage/Power (230 V)50/60 Hz, approx. 3,400 W Voltage/Power (115 V)50/60 Hz, approx. 1,800 W Installation requirementsMin. 15 cm clearance from the rear wall, 20 cm clearance from the ceiling, 5 cm clearance at the sides; max. installation altitude 2,000 m Environmental conditions+5 °C to +40 °C, max. 80% relative humidity (non-condensing) Packaging dimensions930 × 1,380 × 930 mm Net weight/Gross weightapprox. 110 kg / approx. 161 kg CertificationsCE (LGA, 0197), VDE, UL Medical device classificationClass IIb in accordance with MDD 93/42/EEC Do you require additional accessories, such as further stainless steel grating panels or custom calibration? Our procurement service will be happy to assist you with any special requests.
Memmert UN450 Universal Oven, 449 litres, natural convection, 300 °C, SingleDISPLAY
Large-capacity drying without turbulence: Memmert UN450 The Memmert UN450 universal oven is the ideal unit for laboratories and industrial applications requiring gentle temperature control of large batches or bulky samples. With a generous internal volume of 449 litres and natural convection (without a fan), it ensures completely turbulence-free heat transfer. This makes it the perfect choice for drying fine powders, light granules or sensitive components that could be stirred up or damaged by an air flow. Intuitive operation with SingleDISPLAY Equipped with the user-friendly SingleDISPLAY, the UN450 is incredibly easy and straightforward to operate. Temperature, programme duration and the position of the exhaust air flap for fresh air supply can be set intuitively via the high-resolution TFT touchscreen. A high-precision Pt100 temperature sensor (DIN Class A) ensures accurate measurement results and reliable control. Top quality and safety on a large scale Memmert stands for durability: both the housing and the fully welded interior are made of robust, scratch-resistant and easy-to-clean stainless steel (1.4301). Full-surface heating behind the inner walls ensures gentle and uniform heat transfer. To safeguard your samples and processes, the cabinet is fitted with an integrated electronic temperature monitor and a mechanical temperature limiter. Technical specifications in detail: Model: UN450 (natural convection / without fan) Volume: 449 litres Temperature range: Min. 5 °C above room temperature to +300 °C Control: SingleDISPLAY (1x high-resolution TFT touchscreen) Internal dimensions (W x D x H): 1040 x 720 x 600 mm External dimensions (W x D x H): 1224 x 884 x 1247 mm (depth plus 56 mm door handle) Electrical connection: 400 V, 3-phase, 50/60 Hz (high-voltage connection required!) Power consumption: approx. 5800 W Max. load: 300 kg (unit total) / 30 kg (per drawer) Contents of delivery: 1x Memmert UN450 universal cabinet 2x stainless steel wire shelves (electropolished) 1x factory calibration certificate (at +160 °C) Operating instructions Accessories & Service: Do you require additional stainless steel grates (up to 8 available) or a perforated sheet insert for smaller samples? Please use our bespoke procurement service if you cannot find the right accessories directly in the shop.
Memmert HPP260eco Constant-Climate Chamber, 256 l, 0°C to +70°C
Unrivalled precision for stability testing: the Memmert HPP260eco The Memmert HPP260eco constant-climate chamber is the gold standard for stability testing, climatic testing and controlled storage in laboratories and research facilities. With a generous volume of 256 litres, this model offers the ideal capacity for medium-sized sample batches whilst maintaining a compact footprint. Thanks to innovative Peltier technology, the HPP260eco operates extremely energy-efficiently, virtually vibration-free and whisper-quiet. Whether for ICH-compliant stability tests (Q1A) in the pharmaceutical industry or demanding material testing in industry – the HPP260eco delivers absolutely reproducible results under highly stable conditions. Focus on energy-efficient Peltier technology At the heart of the HPP260eco is the highly efficient Peltier heating and cooling system. Unlike conventional compressor-cooled units, this technology saves up to 90 per cent in energy costs during partial-load operation. Sustainability is another key advantage: as the system operates entirely without refrigerant-based cooling units, it is virtually maintenance-free and environmentally friendly. The precise fine-tuning of the Peltier elements enables extremely small temperature fluctuations, which is a critical quality feature for your validation, particularly during sensitive long-term tests. Active humidity control for precise conditions A key performance feature of the HPP260eco is its active digital humidification and dehumidification. An external water tank and a self-priming pump are used to precisely control the relative humidity within a range of 10% to 90% rh. Homogeneous distribution within the chamber is ensured by an optimised ventilation system, so that identical climatic conditions prevail at every point in the chamber. This stability is essential for compliance with strict quality standards and the validation of your processes in the pharmaceutical, cosmetics and food industries. Maximum control with the TwinDISPLAY The Memmert TwinDISPLAY ensures intuitive operation and seamless monitoring. Two high-resolution TFT colour graphic displays show all relevant parameters, such as temperature, humidity and fan speed, at a glance. The integrated ControlCOCKPIT software enables legally compliant documentation of process data via USB or Ethernet – a must for GLP/GMP-compliant environments. With the innovative AutoSAFETY system and electronic temperature monitoring, your valuable sample is also protected against deviations at all times. Technical details Internal volume: 256 litres Temperature range: 0 °C to +70 °C (without light) Temperature control accuracy: 0.1 °C Humidity range: 10% to 90% rh Humidity control accuracy: 0.5% rh Internal dimensions (W x H x D): 640 x 800 x 500 mm External dimensions (W x H x D): 824 x 1183 x 655 mm (excluding door handle and connections) Max. number of shelves: 9 (2 wire shelves included as standard) Max. load per unit: 200 kg (max. 20 kg per standard rack) Interior material: Stainless steel 1.4301 (ASTM 304), electropolished Casing material: Textured stainless steel, galvanised rear panel Interfaces: Ethernet (LAN), USB Data logger: Internal memory for log data (minimum 10 years’ capacity) Mains connection: 230 V, 50/60 Hz; power consumption approx. 600 W Weight: approx. 104 kg net Scope of delivery HPP260eco constant-climate chamber 2 stainless steel grates, electropolished Factory calibration certificate (standard points: +10°C, +25°C, +40°C and 60% rh at +25°C) Water connection kit including hose and 10-litre container AtmoCONTROL software (via USB stick) and comprehensive operating instructions Accessories & Advice Maximise the flexibility of your HPP260eco: whether you need additional stainless steel grids, reinforced shelves for heavy loads or integrated LED lighting modules for growth experiments – we offer the right upgrade. Do you require expert training or professional IQ/OQ qualification on site? Take advantage of our dynamic procurement service for a personalised consultation. Our team of experts will be happy to provide you with a bespoke quote tailored precisely to your laboratory workflow.
Memmert UF30 Universal Oven, forced-air drying oven, 32 litres, +300 °C
Precision in the smallest of spaces: the Memmert UF30 universal cabinet The Memmert UF30 universal cabinet epitomises German engineering excellence in the field of temperature control technology. In laboratories where space is at a premium but no compromises can be made on temperature accuracy, this model is the first choice. With an internal volume of 32 litres and powerful forced-air circulation technology, the UF30 delivers excellent drying results and unrivalled temperature uniformity. Whether for material testing, ageing tests, drying glassware or baking components – this universal oven masters every thermal task up to +300 °C with flying colours. The principle of forced air circulation (“F” for Forced Air) The key difference between the Memmert UF30 universal oven and static ovens (UN series) is the integrated, high-performance fan. The ‘F’ in the model designation stands for ‘Forced Air Circulation’. Why is this important for your application? Faster drying: Active air movement removes moisture from the sample surface much more efficiently than natural convection. If you need to dry damp granules, painted parts or washed laboratory equipment, the UF30 significantly reduces the process time. Uniform temperature distribution: The fan ensures continuous air circulation within the chamber. This prevents hot spots or cold zones. Even when the cabinet is fully loaded, the temperature remains virtually the same across all shelf levels. This is essential for standard-compliant testing (e.g. in accordance with DIN or ISO). Rapid recovery times: After the door is opened, the UF30 returns to the set temperature in a flash thanks to active air circulation. Unique heating technology: all-round radiant heat One of Memmert’s hallmarks is its all-round heating. Unlike competitors, who often install heating coils only in the base or on the rear wall, the UF30’s heating elements are protected within fins on all four sides of the interior. This greatly increases the heat-emitting surface area. The result is extremely gentle heat transfer without localised overheating points (‘hotspots’). Your valuable samples are not scorched by direct heat radiation, but are heated evenly. This technology also ensures excellent energy efficiency. Stainless steel: Hygienic, robust and durable The Memmert UF30 universal cabinet is made almost entirely of high-quality, stainless steel (grade 1.4301). The interior: It is seamless, deep-drawn and features rounded corners. This means there are no crevices where dirt or dust can accumulate. Cleaning is completed with just a few wipes – an enormous advantage in cleanroom-like environments or food analysis. The outer casing: The distinctive textured stainless steel sheet is not only a visual highlight in any laboratory, but is also extremely resistant to scratches, fingerprints and mechanical stress. A Memmert cabinet often still looks as good as new even after 20 years. Intuitive operation: ControlCOCKPIT (SingleDISPLAY) The UF30 is controlled via the intuitive ControlCOCKPIT. In the standard version (SingleDISPLAY), this high-resolution TFT touchscreen display offers everything you need for routine operation without overwhelming you with unnecessary complexity. Touch & Turn: You select the function (temperature, fan speed, air damper position, timer) via touch and set the value precisely using the rotary control. Air exchange control: A key feature is the motorised exhaust air damper. You can set on the display how much humid air is to be vented from the cabinet (0% to 100% opening). This allows for precise control of the drying process. Timer functions: Set a running time or use the “SetpointWAIT” function. With this function, the timer only starts once the target temperature inside the chamber has actually been reached. This ensures that your sample is temperature-controlled for exactly the prescribed duration. Safety for the laboratory and the sample The Memmert UF30 universal cabinet is self-monitoring. An electronic temperature monitor (TWW, protection class 3.1) and a mechanical temperature limiter (TB, protection class 1) provide dual protection. Should the electronics fail, the mechanical protection takes over and switches off the heating before any danger arises. Versatility in use Thanks to its compact dimensions, the UF30 fits on any laboratory bench, yet still offers sufficient space for standard applications. Drying: Of powders, granules and electronic components. Ageing: Simulating years of storage through elevated temperatures (plastics, packaging). Curing: Curing of paints or adhesives. Warm-holding: Temperature control of media or bed linen in clinical settings. In summary, the Memmert UF30 is the perfect combination of compactness, speed (thanks to forced air circulation) and legendary build quality. It is a sound investment for any laboratory. Technical data Model: UF30 Universal Cabinet Convection type: Forced circulation via air turbine (forced air), adjustable in 10% increments Internal volume: 32 litres Temperature range: At least 5 °C (preferably 10 °C) above room temperature up to +300 °C Setting accuracy: 0.1 °C (up to 99.9 °C) / 0.5 °C (from 100 °C) Display: SingleDISPLAY (TFT colour graphics) Inner chamber material: Stainless steel 1.4301 (ASTM 304), deep-drawn Housing material: Textured stainless steel, rear panel made of galvanised sheet steel Internal dimensions (W x H x D): 400 x 320 x 250 mm External dimensions (W x H x D): 585 x 704 x 434 mm (depth excluding door handle; depth including handle: +56 mm) Load capacity per shelf: max. 20 kg Total load capacity: max. 60 kg Number of shelves: 1 (standard) / max. 3 possible Voltage / Power: 230 V, 50/60 Hz / approx. 1600 W Protection class: IP 20 Weight: approx. 45 kg (net) Contents of delivery 1 x Memmert UF30 universal cabinet 1 x stainless steel wire rack (insert) 1 x mains cable 1 x factory calibration certificate (at +160 °C) 1 x User manual Customised requirements & accessories Do you require additional insert trays (perforated sheets or wire mesh trays), a feed-through for external sensors, or the AtmoCONTROL software for data logging? We can customise your Memmert cabinet to your specifications. Please contact our procurement service.
Memmert IN750m incubator, 749 litres, 20–80°C
IN750m incubator, medical device, natural convection, SingleDISPLAY, 749 l, operating temperature range: at least 5 °C above room temperature to +80 °C, Set temperature range +20 °C to +80 °C, with 2 wire shelves, external stainless steel door, internal glass door, electronically adjustable exhaust air flap from 0 % to 100 % in 10 % increments, Ethernet interface for reading log data; double overtemperature protection, integrated data logger with storage capacity for at least 10 years, setting of 3 calibration values each via the ControlCOCKPIT; factory calibration certificate for +37 °C; Textured stainless steel housing: 1224 x 1720 x 784 mm; stainless steel interior: 1040 x 1200 x 600 mm; voltage: 230 V, 50/60 Hz; max. power consumption: approx. 2000 W Accessories and spare parts available on request!
Memmert UF750TS pass-through cabinet, 749 litres, 20–250°C
UF750TS pass-through cabinet, TwinDISPLAY, 749 l, 20 °C - 250 °C, with 2 wire shelves, stainless steel door on both sides, electronically adjustable exhaust air flap from 0 % to 100 % in 10 % increments and fan speed adjustment from 0 % to 100 % in 10 % increments, Ethernet interface for reading out log data; additional programme transfer and online logging; USB port on the ControlCOCKPIT for a USB stick; multiple overtemperature protection, integrated data logger with storage capacity for at least 10 years, setting of 3 calibration values each on the ControlCOCKPIT; factory calibration certificate for +160 °C; Structural stainless steel housing: 1224 x 1714 x 782 mm; stainless steel interior: 1040 x 1200 x 600 mm; voltage: 400 V, 50/60 Hz; max. power consumption: approx. 5000 W
Memmert SF750plus hot-air steriliser, 749 l, +250 °C, TwinDISPLAY, medical device
Maximum capacity for absolute safety: Memmert SF750plus hot-air steriliser The Memmert SF750plus (MPN SF750plus) is a giant amongst sterilisers. With an impressive internal volume of 749 litres, it offers ample space for the reprocessing of medical instruments, glassware or heat-resistant materials in hospitals, large laboratories and industry. As a Class IIb medical device (in accordance with MDD 93/42/EEC until 26 May 2024; thereafter, please note MDR compliance), this unit meets the most stringent regulatory requirements for hot-air sterilisation. Where other units reach their capacity limits, the SF750plus is only just getting started – and without compromising on temperature accuracy. Safety comes first: the SetpointWAIT function In sterilisation, time and temperature are everything. A critical flaw in conventional units is that the process time (sterilisation time) often begins as soon as the air inside the chamber has reached the setpoint temperature – yet the items being sterilised may still be cooler at that point. The SF750plus eliminates this risk with the SetpointWAIT function. The programme sequence only continues once the setpoint temperature has been reached within a very narrow tolerance range at all measurement points (or, optionally, at a PT100 sensor directly on the items being sterilised). This guarantees that the prescribed hold time (e.g. 180 °C for 30 minutes in accordance with DIN) is adhered to precisely. Here, ‘validatable safety’ is not just a buzzword, but a technical reality. TwinDISPLAY: High-end control system for complex processes As a model in the “plus” series, the SF750plus is equipped with the intuitive ControlCOCKPIT featuring TwinDISPLAY. Two high-resolution TFT touchscreens give you full control and a clear overview. Intuitive operation: Temperature, fan speed, air damper position and programme time can be adjusted using touch drag-and-drop. HeatBALANCE: A unique selling point of the Plus models. Heat distribution is particularly critical with such a large capacity of 749 litres. With HeatBALANCE, you can individually adjust the heating output between the upper and lower heating elements to physically compensate for temperature-related differences (heat rises). Monitoring: Both displays show setpoint and actual values, as well as the status of the safety devices. Forced Air Circulation: The ‘F’ factor The ‘F’ in the model name SF750plus stands for ‘Forced Air Circulation’. A quiet yet powerful fan continuously circulates the hot air within the chamber. In a unit of this size, this is essential to prevent ‘cold spots’ and ensure uniform temperature distribution right into the furthest corners. The fan speed is adjustable in 10 per cent increments, allowing the airflow to be adapted to sensitive contents (e.g. powders that must not be stirred up). Stainless steel: Hygienic, robust, durable Memmert is renowned for its unique textured stainless steel. Both the outer casing and the interior are made of high-quality, rust-proof stainless steel (grade 1.4301). Scratch-resistant: The textured surface is resistant to signs of wear and fingerprints. Hygienic: The interior is manufactured with deep-drawn ribs. This means: no sharp edges, no hard-to-clean corners and an integrated, tilt-proof guide for the wire shelves. Corrosion-resistant: Ideal for daily use with disinfectants and high temperatures. Connectivity and documentation The SF750plus offers state-of-the-art interfaces for the comprehensive documentation of sterilisation processes – a fundamental requirement in a medical environment. USB port: On the ControlCOCKPIT, process data (logger) can be transferred directly to a USB stick or programmes can be uploaded. Ethernet interface: Integrate the device into your network to monitor it via the AtmoCONTROL . User ID: The optional User ID function (on a USB stick) prevents unauthorised tampering with the sterilisation programme. Technical specifications Device type: Hot-air steriliser (medical device) Model: SF750plus Capacity: approx. 749 litres Internal dimensions: W 1040 x H 1200 x D 600 mm Casing: W 1224 x H 1720 x D 784 mm Temperature range: +10 °C above room temperature to +250 °C Control system: TwinDISPLAY (2 x TFT touchscreen) Air circulation: Forced circulation (adjustable fan) Max. load: approx. 300 kg (entire unit) Shelves: 2 wire shelves included (max. 14 possible) Voltage: 400 V, 3-phase (three-phase connection required!) Power consumption: approx. 7,000 W Weight: approx. 217 kg Contents of delivery 1 x Memmert SF750plus hot-air steriliser 2 x stainless steel wire racks (electropolished) 1 x calibration certificate (at +160 °C) 1 x mains cable (three-phase) 1 x User manual & AtmoCONTROL software (download/USB stick) Customised requirements & accessories Do you require reinforced grating for particularly heavy instrument sieves or a feed-through for external sensors? Due to the three-phase connection and the size of the unit, delivery directly to the point of use is often advisable. Please contact our service team for a bespoke delivery quote.
Memmert IF30m Incubator, 32 litres, 20–80°C
IF30m incubator, medical device, forced convection, SingleDISPLAY, 32 l, operating temperature range: at least 10 °C above room temperature up to +80 °C, set temperature range: +20 °C to +80 °C, with 1 wire shelf, external stainless steel door, internal glass door, electronically adjustable exhaust air flap from 0% to 100% in 10% increments and fan speed adjustment from 0% to 100% in 10% increments, Ethernet interface for reading out log data; dual overtemperature protection, integrated data logger with storage capacity for at least 10 years, setting of 3 calibration values each via the ControlCOCKPIT; factory calibration certificate for +37 °C; Structured stainless steel housing: 585 x 704 x 434 mm; stainless steel interior: 400 x 320 x 250 mm; voltage: 230 V, 50/60 Hz; max. power consumption: approx. 1600 W Accessories and spare parts available on request!
Memmert IPP1060ecoplus Peltier-cooled incubator, 1060 L, 0–70 °C, TwinDISPLAY
Thermodynamic efficiency through advanced Peltier technology In the demanding fields of microbiology, the stability testing of pharmaceuticals in accordance with ICH guidelines, or the cultivation of insects and cell cultures, absolutely precise and stable temperature control is essential. The Memmert IPP1060ecoplus completely redefines the standards for incubators in the 1,000-litre class. Instead of a conventional, fault-prone compressor cooling system using climate-damaging refrigerants, this high-tech unit operates exclusively with state-of-the-art Peltier elements (based on the heat pump principle). The system cools and heats using exactly the same semiconductor component. The process-related advantage: in continuous operation, the unit consumes up to 90 per cent less energy than comparable compressor incubators. As Peltier elements can be controlled with extreme precision and without delay, the heating, cooling and recovery times following the opening of the door are drastically minimised. Dangerous temperature overshooting, which could irreversibly destroy sensitive samples such as protein crystals or delicate cell cultures, is physically virtually ruled out by this precise control. TwinDISPLAY: Maximum process reliability and GLP compliance The ‘plus’ suffix in the model name indicates the integration of the high-end TwinDISPLAY control system. This dual, high-resolution TFT colour display offers users full control over all process-critical parameters. Two independent Pt100 temperature sensors (DIN Class A) continuously monitor each other within the chamber via a 4-wire measurement circuit. In the event of a potential hardware fault, the intact sensor immediately and seamlessly takes over the function of the other. The intelligent SetpointWAIT function also ensures that the programmed process and hold time only begins once the exact target temperature has been physically reached throughout the entire interior. For strictly certified laboratories in accordance with Good Laboratory Practice (GLP) or FDA requirements, the internal data logger records all measured values in a tamper-proof manner for at least ten years. The supplied AtmoCONTROL software enables the convenient creation of complex temperature profiles on a PC and their seamless transfer via USB or Ethernet interface. Enormous usable volume with whisper-quiet operation With a fully usable internal volume of 1,060 litres, the IPP1060ecoplus is the ideal large-scale unit for laboratories with extremely high sample throughput or for the simultaneous storage of bulky test batches. Despite its enormous capacity, the Peltier incubator operates almost silently and with virtually no vibration, as there is no heavy compressor to transmit mechanical vibrations to the sample vessels. This is an invaluable analytical advantage for sensitive biological cultures. To ensure that the thermal microclimate inside the chamber is not disrupted during visual sample inspection, this large-volume unit is fitted with double inner glass doors behind the outer doors. Hygienic design and high-quality materials for sterile environments Memmert makes no compromises when it comes to durability and hygiene. Both the textured outer casing and the seamless, fully welded interior are made entirely from high-quality, corrosion-resistant stainless steel. In stark contrast to cheap plastic interiors, this stainless steel offers outstanding microbiological safety. It can be thoroughly disinfected using all standard laboratory cleaning agents, does not release any gases and provides absolutely no breeding ground for bacteria or fungi. The Memmert IPP1060ecoplus is therefore the most economical, safest and most environmentally friendly solution for the most demanding incubation processes from 0 °C to +70 °C. Technical details Useful volume: 1060 litres Operating temperature range: 0 °C (at least 20 °C below room temperature) to +70 °C Temperature control accuracy: 0.1 °C Temperature control: 2 x Pt100 sensors (DIN Class A in 4-wire measurement) for mutual monitoring Heating/cooling technology: Advanced Peltier Technology (refrigerant-free heat pump principle) Air circulation: Forced circulation via Peltier fan (rapid energy transfer) Control: TwinDISPLAY (adaptive multifunctional digital PID microprocessor controller with 2 TFT displays) Safety: Adjustable electronic over-temperature protection, mechanical temperature limiter, self-diagnostic system Timer: Digital countdown timer (1 minute to 99 days) Additional function: SetpointWAIT (process time only starts once the setpoint temperature has been reached) Data logger: Internal ring buffer for at least 10 years of tamper-proof data Interfaces: Ethernet, USB (including AtmoCONTROL software on a USB stick) Inner chamber material: Stainless steel (grade 1.4301 / ASTM 304) Housing material: Textured stainless steel Doors: 2 external stainless steel doors, 2 internal full-glass doors (double-leaf) Shelves (racks): Up to 14 shelves possible Internal dimensions (W x H x D): 1040 x 1200 x 850 mm External dimensions (W x H x D): 1224 x 1720 x 1005 mm Weight (net): approx. 248 kg Maximum power consumption: approx. 1300 W Voltage: 230 V / 115 V, 50/60 Hz Contents of delivery 1 x Memmert Peltier-cooled incubator IPP1060ecoplus (1060 L) 2 x stainless steel wire shelves (electropolished) 1 x factory calibration certificate (for +10 °C, +25 °C and +40 °C) 1 x USB stick with AtmoCONTROL software and operating instructions 1 x mains lead Individual requirements & accessories The two stainless steel grating panels supplied provide a solid foundation. However, to make full use of the enormous 1,060-litre capacity in your laboratory, we strongly recommend ordering additional electropolished stainless steel grating panels (up to a maximum of 14) or reinforced grating panels (for loads of up to 60 kg). For comprehensive quality management documentation in GMP areas, you can also commission customised IQ/OQ/PQ qualification documents and measurements from us. Our procurement service will be happy to configure the ideal setup for you, including suitable drip trays and individual calibration certificates.
Memmert SF260plus Hot-Air Steriliser, 256 L, TwinDISPLAY, Class IIb medical device
High-end sterilisation for the most demanding requirements The Memmert SF260plus hot-air steriliser is the flagship model of the S Series and is certified as a Class IIb medical device. With a generous capacity of 256 litres, it not only offers space for large loads but also guarantees maximum process reliability thanks to its advanced features. The ‘Plus’ here stands for intelligent redundancy: two high-precision Pt100 sensors monitor the temperature independently of one another and, in the event of a fault, seamlessly take over control to safeguard the sterilisation process. HeatBALANCE: Tailored heat distribution An exclusive feature of the TwinDISPLAY units is the HeatBALANCE function. It allows you to specifically adjust the distribution of heating power between the top and bottom (-50% to +50%). In combination with the air turbine (forced convection), which can be adjusted in 10 % increments, you can thus perfectly adapt the temperature distribution inside the chamber to specific loading patterns. This ensures faster heating times and uniform heating even with complex load configurations.Use in medical practices, clinics and laboratories As a Class IIb medical device, the SF260plus is designed for the sterilisation of medical materials using dry heat at atmospheric pressure – for example, for the reprocessing of instruments in doctors’ and dentists’ surgeries, in hospital hygiene departments, or in microbiological and pharmaceutical laboratories, where traceability and validatable processes are required. The combination of SetpointWAIT, redundant Pt100 sensors and a factory calibration certificate supports precisely these requirements for documentation and process reliability. Comprehensive documentation and ease of use The intuitive ControlCOCKPIT, featuring two high-resolution TFT displays (TwinDISPLAY), provides a complete overview of all parameters. Thanks to the SetpointWAIT function, the process time only begins to run once the setpoint temperature has been reached at all measurement points – a fundamental requirement for validatable processes. Via the standard USB interface, you can save logs directly to a USB stick or easily transfer programmes using the AtmoCONTROL software. The hygienic stainless-steel interior is robust and easy to clean. Technical details Model: SF260plus (Class IIb medical device) Volume: 256 litres External dimensions (W x H x D): 824 x 1183 x 684 mm (depth +56 mm for door handle) Internal dimensions (W x H x D): 640 x 800 x 500 mm Temperature range: +20 °C to +250 °C Sensors: 2 x Pt100 sensors (DIN Class A) for redundant monitoring Control: TwinDISPLAY (adaptive PID microprocessor controller with 2 TFT displays) Ventilation: Forced convection, fan speed adjustable in 10% increments Special function: HeatBALANCE (adjustable top/bottom heat distribution) Safety functions: SetpointWAIT, AutoSAFETY (ASF), TWW/TWB selectable Interfaces: Ethernet LAN and USB Max. load: 300 kg per unit / 20 kg per shelf Voltage / Power: 230 V, 50/60 Hz / approx. 3400 W Contents of delivery 1x Memmert SF260plus hot-air steriliser (base unit) 2x stainless steel wire racks (electropolished) 1x factory calibration certificate (standard at +160 °C) Note: The AtmoCONTROL software can be used via a USB stick or is available as a download. Customised requirements & procurement service Do you require specific accessories such as a mobile base frame, additional shelves or a qualification (IQ/OQ)? If you cannot find the desired accessories or a specific configuration directly in the shop, please use our bespoke procurement service. We will provide you with a suitable quote for your Memmert SF260plus at short notice.
Memmert UF450plus Universal Cabinet, 449 litres, TwinDISPLAY, 300 °C
High-end drying on a large scale: Memmert UF450plus The Memmert UF450plus universal oven combines a generous internal capacity of 449 litres with the most advanced control technology on the market. It is the perfect solution for laboratories, research institutions and industry when large batches or bulky samples need to be dried, sterilised or tested under strictly controlled, complex temperature profiles. The powerful forced-air circulation system guarantees extremely short heating-up and drying times. TwinDISPLAY: Full control for complex processes At the heart of this model is the intuitive TwinDISPLAY. Two high-resolution TFT touchscreens make it child’s play to configure sophisticated temperature ramps and programme-controlled sequences. The fan speed and fresh air supply can be precisely controlled. In addition, the HeatBALANCE function allows the distribution of heating power between the upper and lower sections of the cabinet to be specifically adjusted – ideal for asymmetrical loads. Uncompromising safety and documentation Two independent Pt100 sensors (DIN Class A) monitor the temperature and seamlessly take over the function of the other in the event of a failure. The AutoSAFETY system protects your valuable load through automatic alarms and heating shutdown in the event of deviations. To meet the strictest quality standards, the integrated data logger records the entire process, which can be conveniently analysed using the supplied AtmoCONTROL software. Detailed technical specifications: Model: UF450plus (convection / forced air) Volume: 449 litres Temperature range: Min. 10 °C above room temperature up to +300 °C Control: TwinDISPLAY (2x high-resolution TFTs, fully programmable) Internal dimensions (W x D x H): 1040 x 720 x 600 mm External dimensions (W x D x H): 1224 x 884 x 1247 mm (depth plus 56 mm door handle) Electrical connection: 400 V, 3-phase, 50/60 Hz (high-voltage connection required!) Power consumption: approx. 5800 W Max. load: 300 kg (unit total) / 30 kg (per standard drawer) Contents of delivery: 1x Memmert UF450plus universal cabinet 2x stainless steel wire shelves (electropolished) 1x factory calibration certificate (at +160 °C) 1x USB stick (including AtmoCONTROL software) Operating instructions Accessories & Service: Do you require reinforced grating panels for heavy individual samples or a bespoke calibration certificate? Please make use of our bespoke procurement service if you cannot find the accessories you require directly in the shop.
Memmert ICH110 climate chamber (108 L) with humidity control, -10°C, 10–80% rh
Memmert ICH110 climate chamber: precision for stability testing The Memmert ICH110 climate chamber sets new standards in temperature- and humidity-controlled storage and testing. With a usable volume of 108 litres and a precise control range of -10 °C to +60 °C and 10 % to 80 % relative humidity (rh), this model meets the stringent requirements for standard-compliant stability testing, in particular in accordance with ICH Q1A. Superior technology: efficient and vibration-free thanks to Peltier At the heart of the ICH110 is the advanced Peltier heating and cooling system. Unlike traditional compressor-based units, this technology operates virtually vibration-free – a crucial advantage when working with sensitive samples or in quiet laboratory environments. The system impresses with its high energy efficiency and rapid response times to changes in temperature and humidity. Active humidification and dehumidification ensure outstanding homogeneity and stability of the set parameters throughout the entire interior. Main areas of application for the ICH110 This climate chamber is the first choice for demanding applications in the pharmaceutical, industrial and research sectors: Stability testing (pharmaceuticals): Long-term and accelerated tests in accordance with ICH guidelines. Material testing: Conditioning and ageing of plastics, metals or composite materials. Climate-controlled storage: Protection of sensitive electronic components or samples. Full control with AtmoCONTROL The standard AtmoCONTROL software enables intuitive programming, monitoring and comprehensive documentation of all process data, which is essential for quality assurance and audit trails. Put your trust in Memmert’s proven quality for reproducible and reliable results in your laboratory. Do you have any questions about the Memmert ICH110 or do you require a specific configuration? Contact our team for a bespoke quote.
Memmert UN260m universal cabinet, 256 litres, 20–300 °C
UN260m universal cabinet, medical device, natural convection, SingleDISPLAY, 256 l, operating temperature range: at least 5 °C above room temperature up to +300 °C, set temperature range +20 °C to +300 °C, with 2 wire shelves, stainless steel door, electronically adjustable exhaust air flap from 0 % to 100 % in 10 % increments, Ethernet interface for reading out log data; double overtemperature protection, integrated data logger with storage capacity for at least 10 years, setting of 3 calibration values each via the ControlCOCKPIT; factory calibration certificate for +160 °C; Structured stainless steel housing: 824 x 1183 x 684 mm; stainless steel interior: 640 x 800 x 500 mm; voltage: 230 V, 50/60 Hz; max. power consumption: approx. 3400 W Accessories and spare parts available on request!
Memmert IN55plus Incubator, 53 L, with TwinDISPLAY & natural convection
The Memmert IN55plus is a high-precision incubator with natural convection, designed specifically for applications where air turbulence must be avoided. With a compact chamber volume of 53 litres and the advanced TwinDISPLAY control system, this model offers maximum process reliability for the incubation of sensitive organisms in research, medicine and the pharmaceutical industry. High-end control system: ControlCOCKPIT with TwinDISPLAY Unlike the standard version, the IN55plus features the adaptive TwinDISPLAY. Two high-resolution TFT colour graphic displays (touchscreens) enable intuitive setting and monitoring of all parameters. Take advantage of exclusive functions such as HeatBALANCE for individual adjustment of the heat output distribution (top/bottom) or the graphical programming of temperature profiles directly on the unit. Gentle temperature control without forced air circulation Natural convection ensures purely thermal air circulation without a fan. This effectively prevents samples from drying out and minimises the risk of cross-contamination from airborne particles. The integrated all-round surface heating guarantees homogeneous temperature distribution throughout the entire stainless steel interior. Maximum safety & sterilisation The IN55plus offers dual safety through two Pt100 temperature sensors (DIN Class A), which monitor each other and take over operation in the event of a fault (AutoSAFETY). For hygiene-critical areas, a permanently installed sterilisation programme is integrated, which reliably sterilises the interior (without load) at +160 °C for 4 hours. Technical Details Model: Memmert IN55plus (2012 generation) Capacity: 53 litres Convection type: Natural convection (no forced air circulation) Temperature setting range: +20 °C to +80 °C Operating temperature range: At least 5 °C above room temperature to +80 °C Setting accuracy: 0.1 °C Control system: TwinDISPLAY (2x TFT touchscreen) Temperature sensors: 2x Pt100 sensors, DIN Class A (4-wire measurement) Sterilisation: Integrated programme (4 hours / 160 °C) for internal sterilisation Functions: HeatBALANCE, SetpointWAIT, AtmoCONTROL Interior: Stainless steel (grade 1.4301), deep-drawn ribbing Outer casing: Textured stainless steel sheet, galvanised rear panel Internal dimensions (W x H x D): 400 x 400 x 330 mm External dimensions (W x H x D): 585 x 784 x 514 mm (depth excluding door handle, +56 mm for handle) Load capacity: Max. 80 kg total / max. 20 kg per shelf Shelves: 1 stainless steel wire shelf included, max. 4 possible Interfaces: Ethernet LAN, USB (for programme transfer/logging) Voltage / Power: 230 V, 50/60 Hz / approx. 1000 W Net weight: approx. 57 kg Scope of delivery Memmert IN55plus incubator (basic unit) 1 x stainless steel wire shelf (electropolished) 1 x factory calibration certificate (at +37 °C) 1 x USB stick with AtmoCONTROL software 1 x mains cable Operating instructions Customised requirements & procurement service Do you require additional stainless steel grating (up to 4 available), reinforced grating for heavy loads or a feed-through for external sensors? We will configure your Memmert incubator precisely to your laboratory requirements. Make use of our bespoke procurement service for accessories and special requests.
Memmert UF160TS pass-through cabinet (161 L, 250°C, TwinDISPLAY)
The Memmert UF160TS is a highly specialised pass-through drying cabinet designed for flush-wall installation and serving as a material transfer chamber between two rooms (e.g. between a grey room and a cleanroom). It is based on the high-performance UF series (convection) and is fitted as standard with the premium TwinDISPLAY controller. Function as a thermal airlock The ‘TS’ (Through) is the key feature. (Feature) The oven has two doors (front and rear) which are electrically interlocked. Only one door can be opened at a time. (Benefit) This prevents cross-contamination of the air between the two rooms and makes the UF160TS the ideal, validatable solution for thermal processes in cleanrooms, pharmaceutical production or semiconductor manufacturing. Precision through forced convection and TwinDISPLAY The powerful forced convection (UF) system ensures an extremely fast heat-up time and excellent temperature uniformity throughout the entire 161-litre interior, even when fully loaded. (Feature) The standard TwinDISPLAY is indispensable for procurement specialists in regulated environments (GMP/GLP). It enables the intuitive programming of complex temperature ramps, comprehensive logging (via AtmoCONTROL software) and the configuration of individual user rights (Benefit). Robust, cleanroom-compatible construction The housing and interior are made from high-quality, easy-to-clean stainless steel. The precise workmanship ensures a tight fit against the wall. Technical details Volume: 161 litres Convection: Forced air circulation (adjustable) Temperature range: +10 °C above ambient temperature to +250 °C Controller: TwinDISPLAY (touchscreen, programmable) Doors: 2 (front/rear), electrically interlocked Interior: Stainless steel (1.4301) Casing: Textured stainless steel sheet Internal dimensions (W x H x D): 560 x 720 x 400 mm External housing dimensions (W x H x D): 824 x 1063 x 603 mm Electrical connection: 230 V (single-phase) Power consumption: approx. 3,400 W Scope of delivery Memmert UF160TS pass-through cabinet (basic unit) TwinDISPLAY controller (integrated) 2 wire shelves (stainless steel) Mains cable Operating instructions Customised requirements & procurement service Do you require advice on wall-mounting this pass-through cabinet, a different voltage variant (e.g. three-phase) or additional accessories such as reinforced wire mesh shelves? Our team of experts will be happy to advise you. For configurations or spare parts not listed here, please use our bespoke procurement service.
Memmert SF30 Hot-Air Steriliser (32 L), up to +250 °C
Memmert SF30 Hot-Air Steriliser (Medical Device) The Memmert SF30 is a certified hot-air steriliser (Class IIb medical device) with a 32-litre usable volume, designed for the safe sterilisation of medical devices and laboratory instruments using dry heat. It operates within a temperature range up to +250 °C and utilises natural convection for extremely quiet operation. Guaranteed sterilisation with SetpointWAIT The key feature for validatable processes is SetpointWAIT: the sterilisation process and the timer only start once the exact setpoint temperature has been reached at the items being sterilised. This ensures absolute reliability of decontamination and meets the highest medical standards. Maximum safety and precision As a Class IIb medical device (in accordance with Directive 93/42/EEC), the SF30 is subject to the most stringent quality and safety requirements. Precise temperature control and the high-quality finish of the stainless steel interior ensure reproducible results and easy cleaning. Intuitive operation The SingleDISPLAY cockpit allows for simple and clear setting of all parameters. The AtmoCONTROL software (via USB) enables comprehensive documentation of sterilisation cycles, which is essential for quality assurance. Ensure your laboratory’s sterilisation processes are validatable. Contact us for a quote on the Memmert SF30.
Memmert IF30mplus incubator, 32 litres, 20–80°C
IF30mplus incubator, medical device, forced convection, TwinDISPLAY, 32 l, operating temperature range: at least 10 °C above room temperature up to +80 °C, set temperature range: +20 °C to +80 °C, with 1 wire shelf, external stainless steel door, internal glass door, electronically adjustable exhaust air flap from 0% to 100% in 10% increments and fan speed adjustment from 0% to 100% in 10% increments, Ethernet interface for reading out log data; additional programme transfer and online logging; USB port on the ControlCOCKPIT for a USB stick; multiple overtemperature protection, integrated data logger with storage capacity for at least 10 years, setting of 3 calibration values each on the ControlCOCKPIT; factory calibration certificate for +37 °C; Structured stainless steel housing: 585 x 704 x 434 mm; stainless steel interior: 400 x 320 x 250 mm; voltage: 230 V, 50/60 Hz; max. power consumption: approx. 1600 W Accessories and spare parts available on request!
Memmert ULT360eco ULT freezer, ultra-low-temperature freezer
The Memmert ULT360eco ultra-low temperature freezer represents a highly advanced cryogenic system solution for the long-term preservation and storage of biological and pharmaceutical samples in biobanks, university research institutions and industrial laboratories. When handling highly sensitive samples such as RNA extracts, protein isolates or primary cell lines, absolute temperature stability is the primary criterion for physically ruling out any structural damage to the integrity of the samples caused by thermal fluctuations. The ultra-low temperature freezer covers a precisely adjustable temperature range from -50 °C to -86 °C and, thanks to its advanced system architecture, ensures seamless compliance with strict SOPs (Standard Operating Procedures). For procurement professionals in the pharmaceutical industry, this eco-model, with a practical capacity of 360 litres, offers the optimal combination of maximum process reliability and exceptional energy efficiency , as it has been specifically designed for demanding, resource-efficient continuous operation under GLP and GMP conditions. Cascade cooling and inverter-controlled compressor dynamics The refrigeration heart of the Memmert ULT360eco freezer is based on a high-performance system comprising two cascade-connected inverter compressors. This cascade configuration is physically necessary to bridge the extreme temperature differences between the laboratory environment and the interior of the chamber in a way that is gentle on the samples and thermodynamically efficient. The first stage uses the environmentally friendly, natural refrigerant R290, whilst the second stage is operated with R170 to reliably achieve the ultra-low target temperatures. Thanks to the pioneering integration of two inverter compressors, the system dynamically and continuously adjusts its cooling capacity in real time to match the actual cooling requirements. When the door is opened, the eco-electronics compensate for the influx of heat and moisture by specifically increasing the rotational speed. In steady-state operation, however, the system runs in the energy-optimised partial-load range, which drastically reduces energy consumption compared to conventional systems , minimises mechanical wear and extends the service life. Material-science barrier function and ergonomics The structural boundary of the Memmert ULT360eco ultra-low temperature freezer is defined by a high-quality housing made of textured stainless steel and an interior made of pure stainless steel. This choice of materials guarantees outstanding corrosion resistance against aggressive disinfectants and prevents cross-contamination in multi-user settings at universities. To minimise uncontrolled entropy exchange when accessing the stored cryoboxes, the interior features an intelligent 4-compartment layout, protected by two separate stainless steel inner doors. This thermal barrier ensures that, when accessing samples, only a small portion of the internal volume is exposed to ambient air. A mechanical door lock protects the valuable contents from unauthorised access , whilst an integrated pressure relief vent with a diameter of 26 mm allows the outer door to be reopened immediately after closingby physically equalising the internal vacuum that is created. With a maximum load capacity of 160 kg per shelf and 320 kg for the entire unit , the system is designed for dense sample loading of up to 264 standard 50 mm boxes. Cyber security and Lab 4.0 documentation For scientific quality management, the Memmert ULT360eco ultra-low temperature freezer offers a sophisticated digital operating concept via a 7-inch touchscreen integrated into the external door, which is positioned ergonomically. Temperature measurement is carried out using high-precision Pt1000 resistance sensors , which enable a setting accuracy of 0.1 °C. The cybernetic safety concept includes both visual and audible alarm systems in the event of temperature deviations or an open door, via integrated door-open detection. An integrated backup battery ensures that monitoring and alarm functions are fully maintained even in the event of a total power failure, and that valuable sample batches remain protected. Via modern communication interfaces such as Ethernet LAN and USB , the eco-Freezer can be seamlessly integrated into digital Laboratory Information Management Systems (LIMS) and monitored remotely, guaranteeing seamless documentation of the cold chain for audits. Technical details Thermodynamics & Refrigeration Technology Cooling system: Cascade configuration with two inverter compressors Compressor control: Inverter-controlled for maximum energy efficiency Refrigerant, stage 1: R290 (natural refrigerant) Refrigerant Stage 2: R170 (natural refrigerant) Condenser: Air-cooled Temperature range: -50 °C to -86 °C Metrology & Control Technology Control unit: Ergonomic 7-inch touchscreen, integrated directly into the outer door Setting accuracy: 0.1 °C Temperature sensor: Pt1000 Interfaces: Ethernet LAN , USB Safety features: Visual and audible alarm , integrated door-open detection Power failure protection: Backup battery for continuous alarm and monitoring Construction & Dimensions Internal volume: 360 litres Internal dimensions (W x H x D): 450 x 1276 x 627 mm Housing dimensions (W x H x D): 700 x 1992 x 888 mm Housing material: Robust textured stainless steel Interior material: Pure, easy-to-clean stainless steel Max. Load capacity per unit: 320 kg Max. Load per drawer: 160 kg Maximum capacity (50 mm boxes): 264 Infrastructure & Logistics Door construction: Insulated stainless steel external door with mechanical lock Pressure equalisation: Side feed-through / pressure relief opening with a diameter of 26 mm Installation: Can be moved and locked in place on sturdy swivel castors Net weight: 285 kg Gross weight (including packaging): 370 kg HS code: 8418 40 80 Certifications: CE-approved Contents of delivery 1 x Memmert ULT360eco ULT freezer base unit 2 x stainless steel internal doors for thermal segmentation 3 x stainless steel shelves (height-adjustable) 1 x Integrated backup battery for power failure protection 1 x Integrated castor unit (movable and lockable) 1 x operating instructions Important note: Storage racks and cryoboxes for the systematic storage of samples inside the chamber are not included as standard and must be configured to suit the specific application. Individual requirements & accessories To make optimum use of the 360-litre interior of the Memmert ULT360eco ultra-low temperature freezer and to minimise convective heat exchange during sample access, the use of bespoke stainless steel racks and cryoboxes is physically advisable. The system accommodates up to 264 standard 50 mm boxes. For the vertical storage of heavy sample batches (max. 160 kg per drawer), we recommend an even weight distribution to protect the fibre structures of the drawers. For GMP-relevant applications, we are happy to assist you with manufacturer-compliant qualification (IQ/OQ). Please make use of our procurement service to select your cryogenic infrastructure.
Memmert IPP1400eco Peltier-cooled incubator (1360 L), 0 to +70 °C
Memmert IPP1400eco: Maximum capacity meets energy efficiency The Memmert IPP1400eco is a superlative refrigerated incubator that combines an enormous usable volume of 1,360 litres with highly efficient Peltier technology. It is the ideal solution for laboratories with a high sample throughput that need to operate energy-efficiently within the temperature range of 0 °C to +70 °C. Large-scale Advanced Peltier Technology (APT) Unlike large compressor-based incubators, the IPP1400eco does not use refrigerants or mechanical compressors. The Peltier system cools and heats in a single cycle, resulting in unrivalled quiet, low-vibration operation – ideal for sensitive cultures. This technology is unbeatably energy-efficient, particularly during continuous operation at temperatures close to ambient temperature. Reliable control (SingleDISPLAY) Equipped with the Memmert SingleDISPLAY cockpit, the IPP1400eco is ideal for standard applications and long-term incubations where reliability and ease of use are paramount. All parameters can be set effortlessly and logged via the AtmoCONTROL software. Ideal for microbiology and storage Whether for culturing large batches of microorganisms or the stable, refrigerated storage of samples – the excellent temperature uniformity and robust double-door design make the IPP1400eco the first choice for XXL-scale applications. Do you need advice on the IPP1400eco or its accessories? Contact our team of experts for a personalised quote.
Memmert UF160mplus universal cabinet, 161 litres, 20–300°C
UF160mplus universal cabinet, medical device, forced convection, TwinDISPLAY, 161 l, operating temperature range: at least 10 °C above room temperature up to +300 °C, setpoint temperature range: +20 °C to +300 °C, with 2 wire shelves, stainless steel door, electronically adjustable exhaust air flap from 0% to 100% in 10% increments and fan speed adjustment from 0% to 100% in 10% increments, Ethernet interface for reading out log data; additionally, programme transfer and online logging; USB port on the ControlCOCKPIT for a USB stick; multiple overtemperature protection, integrated data logger with storage capacity for at least 10 years, setting of 3 calibration values each on the ControlCOCKPIT; factory calibration certificate for +160 °C; Structural stainless steel housing: 745 x 1104 x 584 mm; stainless steel interior: 560 x 720 x 400 mm; voltage: 230 V, 50/60 Hz; max. power consumption: approx. 3200 W Accessories and spare parts available on request!