Bandelin SONOREX K 29 EM insert basket for DIGITEC DT and ZE

The Bandelin SONOREX DIGITEC DT 1058 M is the 46-litre bath in the range without a heater. The K 29 EM insert basket and the KT 57 and KT 57 Z basket supports are available as accessories. 16 vibration systems generate a peak power of 2,400 W at 35 kHz; the tank measures 600 x 400 mm.Tank and dimensionsThe tank is made of 2.0 mm thick welded 1.4404 stainless steel and measures 600 x 400 x 200/220 mm internally. The total capacity is 46.0 l, the working capacity is 23.0 l, and there is a fill level mark. Externally, the unit measures 670 x 470 x 400 mm; the housing is made of 1.4301 stainless steel. The drain is a G ¾ ball valve with a 75 cm hose on the right-hand side; the handles are located on the sides.Without heatingThe DT 1058 M has no heating element. The ultrasonic waves heat the bath liquid during operation; there is no temperature preselection. The current consumption is 2.7 A at 230 V. For those wishing to preheat the liquid, the SONOREX DIGITEC DT 1028 CH (45 l, 1,450 W heater) offers a heated bath of a similar size, whilst the DT 1050 CH, with a capacity of 90 l, provides a larger option.Ultrasound, functions, timerThe 16 vibration systems deliver a peak power of 2,400 W and a rated power of 600 W. SweepTec prevents standing waves in the ultrasonic field; the DEGAS rapid degassing function is activated at the start of the cleaning process, whilst the pulse function complements both. The timer operates in the following settings: 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) or in continuous operation. The bath switches off 12 hours after the last button press. The unit operates on 230 V.Accessories for instrument basketsThe K 29 EM stainless steel basket (470 x 240 x 45 mm, mesh size 4 x 4 mm, payload up to 10 kg) is designed for standard instruments and is placed in the basket holder KT 57 or the basket holder with handles KT 57 Z. These holders also accommodate a 1/1 DIN basket or an ISO basket. In addition, there is the lid D 1058 M, the film test frame FT 37 with film inserts FL 40 and the silicone studded mat SM 29 in a pack of two.Position in the rangeThe DT 1028 H has a capacity of 28 l and a 1,300 W heater, whilst the DT 1058 M has a capacity of 46 l without a heater. The K 29 EM insert basket is part of the accessory range for both models.Typical applicationsInstruments in the K 29 EM insert basket (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Ultrasonic cleaning in medical practices, laboratories and workshopsHomogenisation, emulsification, rapid degassingSonochemistry and sample preparation for analytical purposesFrequently asked questionsIs the unit heated?No, the DT 1058 M does not have a heating element.How is it delivered?In a carton on a Euro pallet (1,200 x 800 x 740 mm); the shipping weight, including the pallet, is 56.0 kg.What is included in the drain?A ball valve made of electroplated brass with a hose, packed separately with sealing tape and assembly instructions.What is the working capacity?23.0 l out of a total capacity of 46.0 l.Technical detailsTotal capacity / Working capacity46.0 l / 23.0 lInternal dimensions of the tank (L x W x D)600 x 400 x 200/220 mmExternal dimensions (L x W x H)670 x 470 x 400 mm (excluding handles and ball valve, including feet)Weight (net)29.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, rated power 600 W, 16 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4404, 2.0 mm, weldedHousing materialStainless steel 1.4301DrainG ¾ ball valve with 75 cm hose, right-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 HzCurrent consumption230 V 2.7 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermitted ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging1,200 x 800 x 740 mm, carton on a Euro palletShipping weight (gross, including pallet)56.0 kgScope of delivery1x Bandelin SONOREX DIGITEC DT 1058 M ultrasonic bath1x ball valve (brass, electroplated) with hose, packed separately with sealing tape and assembly instructions1x operating instructionsThe insert basket, basket support, lid and other accessories are only included if ordered together with the unit.Individual requirements and procurement serviceOur procurement service can arrange the K 29 EM insert basket, basket support, D 1058 M lid or a bath with a heater on request.

46.0-litre capacity on a 600 x 400 mm tank surface: where the 29-litre tanks of the ZE series prove too small, the Bandelin SONOREX ZE 1058 is the next-size-up built-in ultrasonic bath. Under-bench installation, a rotary knob control and a separate generator are in line with the design of the smaller models; the generator used here is the GT 1003 M-C.Space requirements and tankThe internal dimensions of the TE 1058.2 tank are 600 x 400 mm with a depth of 200/220+ mm. The base is sloped, the corners are rounded, and the drain is situated in a 1½-inch groove. The 1.4404 stainless steel has a thickness of 2.0 mm. Of the 46.0-litre capacity, 32.0 l is the working capacity; a fill level mark is provided. Externally, the vibrating tank measures 660 x 460 x 270/290 mm; the degree of protection is IP 30. The net weight is 23.3 kg; the gross weight is 47.4 kg in a carton measuring 1,200 x 800 x 740 mm.2,400 watts from 16 vibration systemsSixteen vibration systems are mounted on the base of the tank. They are powered by the GT 1003 M-C ultrasonic generator, which delivers 600 watts of rated power and 2,400 watts of peak power at 35 kHz. The generator housing, made of painted aluminium, measures 360 x 310 x 142 mm and has an IP 20 protection rating. It is mounted vertically using the mounting bracket. A 2-metre-long connection cable with an AMP-CPC plug leads to the tank. The mains connection is 230 V~ (± 10 %), and the current consumption is 2.7 A.Settings for the ST 15.1The rotary knob is used to set times from 1 to 15 minutes (± 5 %); continuous operation is also available. The generator features a pulse function and a sweep function. The version with push-button control, temperature display and DEGAS is the SONOREX ZE 1058 DT, which features the same tank and generator as this model.ZE 1058 or ZE 1059Both models have a capacity of 46.0 l and a peak power output of 2,400 watts. The SONOREX ZE 1059 is slightly wider, with an external width of 504 mm; it has eleven vibration systems on the base and five on the side, and operates using TwinSonic technology. The ZE 1058 has only bottom vibrators and is supplied in a carton measuring 1,200 x 800 x 740 mm, whilst the ZE 1059 is supplied on a pallet of the same dimensions.Accessories for the 600 x 400 mm tankThe K 29 EM is listed as the insert basket. There are dedicated basket supports for this tank size: the KT 57 and the KT 57 Z with handles. The tank can be covered with the D 57 lid or the D 1058 G hinged lid. The SM 29 silicone studded mat is supplied in a set of two, and the G 1 ½ Type V drain fitting is suitable for the groove in the base. The FT 37 film test frame is included in the kit; a built-in rinsing tank can be ordered as the SONOREX SW 58 Z. The permitted ambient temperature is 5 to 40 °C.Typical applicationsCleaning of medical instrumentsCleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionFrequently asked questionsWhat is the working capacity of the bath?32.0 l out of a total capacity of 46.0 l.Is the bath available with a temperature display?Yes, as the ZE 1058 DT with the ST 30.1 DT control unit.What is the current consumption?2.7 A at 230 V.Technical detailsCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of tank (L x W x D)600 x 400 x 200/220+ mm, sloping base, rounded cornersVibrating tankTE 1058.2, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of vibrating tank (L x W x H)660 x 460 x 270/290 mmDrain1½-inch grooveFill level markYesUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, rated power 600 W, 16 vibration systems at the baseUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V), 5.3 A (115 V)Degree of protection of vibrating tankIP 30Permitted ambient temperature5 to 40 °CNet / gross weight23.3 kg / 47.4 kgPackagingCarton 1,200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryVibrating tank TE 1058.2Ultrasonic generator GT 1003 M-CControl unit ST 15.1Film test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting are not included in the Scope of delivery.Individual requirements and procurement serviceFor accessories, the built-in rinsing basin or another model from the SONOREX ZE range, there is an individual procurement need. You can request a quote via our procurement service.

The Bandelin SONOREX ZE 1031 is a built-in ultrasonic bath designed for under-counter installation: The TE 1031 oscillating tank holds 29.0 l; the GT 503 M-C generator is a separate unit; and operation is controlled via the ST 15.1 control unit using a single rotary knob.Tank and installationThe internal dimensions are 510 x 300 mm with a depth of 200/220+ mm; the tank base is sloped and the corners are rounded. The material is 1.4404 stainless steel with a thickness of 2.0 mm. A fill level mark assists with filling; the working capacity is 20.0 out of 29.0 l. The tank has a 1½-inch beaded edge for drainage. The external dimensions of the oscillating tank are 570 x 360 x 270/290 mm, and the degree of protection is IP 30. The permissible ambient temperature is 5 to 40 °C.Install the generator and control unit separatelyThe GT 503 M-C ultrasonic generator is housed in a separate, painted aluminium casing measuring 360 x 310 x 142 mm, with an IP 20 protection rating and a mounting bracket for vertical installation. A 2 m long connection cable with an AMP-CPC plug connects it to the tank; the mains cable is permanently attached to the ST 15.1 control unit. The generator supplies eight vibration systems on the base with a rated power of 300 watts; the peak power is 1,200 watts and the frequency is 35 kHz.Operation via rotary knobThe ST 15.1 sets the time from 1 to 15 minutes (± 5 %) or switches to continuous operation. It also features the pulse function and Sweep, the SweepTec automatic frequency control. If you wish to monitor the bath temperature or use DEGAS, choose the SONOREX ZE 1031 DT: it features the same TE 1031 bath and the same generator, but comes with the ST 30.1 DT control unit, which includes a temperature sensor and temperature display.Position within the SONOREX ZE rangeThe 29-litre tank is available in two power ratings. The ZE 1031 has a peak power output of 1,200 watts and eight vibration systems on the base. The SONOREX ZE 1032, with the same tank volume, has 1,760 watts, a wider oscillating tank and an additional four vibration systems on the side. Larger tanks with a capacity of 46 l are the ZE 1058 and the ZE 1059.Accessories for the TE 1031 tankThere are several parts to choose from for operation. The K 29 EM insert basket hangs in a basket holder; the KT 30 and KT 30 Z models are available with handles. The SM 29 silicone studded mat is supplied in a set of two when ordered. The D 30 lid or the D 1031 G hinged lid are available as covers, and the G 1 ½ Type V drain fitting fits the groove in the bath base. The KW 28-0 drop-in bath with lid is another accessory. The FT 36 film test frame is already included with the bath.Typical applicationsCleaning of medical instrumentsCleaning of particularly sensitive micro-instruments using the Sweep automatic frequency controlCleaning stations where the bath is permanently installed rather than simply placedFrequently asked questionsIs the generator included in the scope of delivery?Yes, the GT 503 M-C ultrasonic generator is included, as are the ST 15.1 control unit and the 2-metre-long connection cable to the generator.Does the bath display the temperature?The temperature sensor, temperature display and overtemperature warning are part of the ST 30.1 DT control unit in the DT version. The ST 15.1 control unit for this model sets the time and continuous operation.What power supply is required?230 V~ (± 10 %) at 50/60 Hz. The current consumption is 1.4 A.Does it come with a cover?No. The D 30 cover and the D 1031 G hinged cover are accessories and are ordered separately.Technical detailsCapacity / Working capacity29.0 l / 20.0 lInternal dimensions of the tank (L x W x D)510 x 300 x 200/220+ mm, sloping base, rounded cornersExternal dimensions of oscillating tank (L x W x H)570 x 360 x 270/290 mmOscillating tankTE 1031, stainless steel 1.4404, thickness 2.0 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, rated power 300 W, 8 vibration systems on the baseUltrasonic generatorGT 503 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepDrainFlange 1 ½ inchesLevel markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption1.4 A (230 V), 2.8 A (115 V)Degree of protection, oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight16.7 kg / 20.3 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1031 oscillating tankGT 503 M-C ultrasonic generatorControl unit ST 15.1Film test frame FT 362 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket holder, lid, drop-in bath, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceFor the SONOREX SW 31 Z built-in rinsing basin, additional accessories or another model in the range, individual procurement requirements apply. You can request a quote via our procurement service.

The Bandelin SONOREX ZE 1032 utilises both bottom and side ultrasonic transducers: in addition to the eight transducers at the bottom of the TE 1032 tank, there are four on the side. This built-in ultrasonic bath, designed for under-counter installation, has a capacity of 29.0 l and a peak power output of 1,760 watts.TwinSonic: sound from below and from the sideBandelin describes TwinSonic as a combination of bottom and side sound waves, which distributes the sound waves throughout the bath and reduces dead zones without the basket having to oscillate. In the TE 1032, this comprises twelve vibration systems, powered by the GT 504 M-C ultrasonic generator with a rated power of 440 watts. The frequency is 35 kHz. Added to this are the pulse function and sweep, as well as the SweepTec automatic frequency control, which is designed for particularly sensitive micro-instruments.Tank and structureThe tank measures 510 x 300 mm internally, with a depth of 200/220+ mm. The base is sloped, the corners are rounded, and the drain is located in a 1½-inch bead. The 1.4404 stainless steel is 2.0 mm thick. Externally, the oscillating tank measures 570 x 404 x 270/290 mm, i.e. 404 mm wide compared with 360 mm for the ZE 1031. Of the 29.0-litre capacity, 20.0 l are available as working volume; a fill level mark is provided.The generator is housed in its own aluminium casing with mounting brackets for vertical installation; it measures 360 x 310 x 142 mm and is rated to IP 20. It is connected to the tank via a 2-metre-long connection cable with an AMP-CPC plug.Operation via rotary knobThe ST 15.1 control unit has a rotary knob for setting times from 1 to 15 minutes (± 5 %) and a setting for continuous operation. The ST 30.1 DT control unit for the SONOREX ZE 1032 DT, which otherwise uses the same bath and generator, features a temperature display.ZE 1032 or ZE 1031The SONOREX ZE 1031 has the same tank size, but only bottom transducers and 1,200 watts peak power. The ZE 1032 has 560 watts more peak power and four side transducers. If you want side-wave sound and the higher power, go for the ZE 1032. If bottom sound and 1,200 watts are enough for you, you can stick with the ZE 1031.Basket, lid and foil testThe bath is supplied without a basket. The K 29 EM insert basket can be fitted into the KT 30 basket holder or the KT 30 Z with handles. The D 30 lid and the D 1031 G hinged lid are available as covers, whilst the SM 29 silicone studded mat (sold in a pack of two) is provided for the base. The FT 36 foil test frame is included in the kit. The G 1 ½ Type V drain fitting belongs to the bead in the tank base. During operation, the permissible ambient temperature is between 5 and 40 °C.Typical applicationsCleaning of medical instrumentsCleaning of sensitive micro-instruments with sweepUltrasonic cleaning of items where acoustic shadows would be a problemFrequently asked questionsHow many vibration systems does the tank have?Twelve, eight at the bottom and four on the side.Does the ZE 1032 have DEGAS?No, DEGAS rapid degassing is a feature of the DT version with the ST 30.1 DT control unit.What is the current consumption?2 A at 230 V~ (± 10 %), 50/60 Hz.Technical detailsUltrasonic frequency35 kHzUltrasonic powerPeak power 1,760 W, rated power 440 WVibration systems8 at the base, 4 on the sideUltrasonic generatorGT 504 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepCapacity / Working capacity29.0 l / 20.0 lInternal dimensions of tank (L x W x D)510 x 300 x 200/220+ mm, sloping base, rounded cornersOscillating tankTE 1032, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)570 x 404 x 270/290 mmDrain1½-inch beadLevel markingsYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2 A (230 V)Degree of protection of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight19.0 kg / 22.6 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ComplianceLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1032 oscillating tankGT 504 M-C ultrasonic generatorControl unit ST 15.1Foil test frame FT 362 m connection cable (AMP-CPC plug) for the generatorInsert basket, basket support, lid, hanging tray, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceFor the KW 28-0 hanging tray, additional accessories or another model in the range, individual procurement requirements apply. You can request a quote without obligation via our procurement service.

Eleven vibration systems at the bottom, five on the sides: the Bandelin SONOREX ZE 1059 distributes its 2,400-watt peak power across the bottom and sides of the tank. It is a built-in ultrasonic bath with a capacity of 46.0 l for under-counter installation; it is operated via the ST 15.1 control unit with a rotary knob.TwinSonic in the large tankBandelin calls the combination of bottom and side sound ‘TwinSonic’. According to the manufacturer, it distributes the sound throughout the bath and reduces sound shadows without the basket having to oscillate. The 16 vibration systems in the TE 1059 tank are powered by the GT 1003 M-C ultrasonic generator with a nominal power of 600 watts at 35 kHz. The ZE 1059 also features a pulse function and ‘SweepTec’ automatic frequency control.Dimensions, material and weightInternally, the tank measures 600 x 400 mm and is 200/220+ mm deep; externally, it measures 660 x 504 x 270/290 mm. At 504 mm wide, it is wider on the outside than the ZE 1058, which measures 460 mm. Base and corners: sloped and rounded. The 1.4404 stainless steel is 2.0 mm thick, and the drain bead measures 1½ inches. Of the 46.0-litre capacity, 32.0 l is the usable volume; the fill level mark indicates the fill height. The net weight is 23.9 kg; the gross weight is 48.0 kg on a pallet measuring 1200 x 800 x 740 mm.Operation via the ST 15.1The rotary knob selects a time of 1 to 15 minutes (± 5 %) or continuous operation. If you require a temperature display, time settings up to 30 minutes and DEGAS, these features are available in the SONOREX ZE 1059 DT with the ST 30.1 DT control unit, which features the same tank and generator as this model.ZE 1059 versus ZE 1058The SONOREX ZE 1058 has 16 bottom vibration systems and no side ultrasound, whilst offering the same capacity and peak power. The ZE 1059 is the version for anyone who wants TwinSonic and has space for an external width of 504 mm.Installation, basket and accessoriesThe generator has its own housing (360 x 310 x 142 mm, IP 20) with mounting brackets for vertical installation and is connected to the tank via a 2-metre-long cable with an AMP-CPC plug. For the tank, the basket supports KT 57 and KT 57 Z with handles are listed, along with the insert basket K 29 EM, the lid D 57 and the hinged lid D 1058 G. The FT 37 film test frame is included in the kit. The permissible ambient temperature ranges from 5 to 40 °C; the current consumption is 2.7 A at 230 V~ (± 10 %).Typical applicationsCleaning of medical instrumentsIntensive yet gentle cleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionUltrasonic cleaning with bottom and side ultrasonic waves in a 46-litre tankFrequently asked questionsHow many vibration systems does the tank have?Sixteen, eleven at the base and five on the sides.How is the unit delivered?On a pallet measuring 1200 x 800 x 740 mm; the gross weight is 48.0 kg.Does the ZE 1059 have a temperature display?No, the temperature display is a feature of the ST 30.1 DT, the ZE 1059 DT variant.Technical detailsCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of the tank (L x W x D)600 x 400 x 200/220+ mm, sloping base, rounded cornersOscillating tankTE 1059, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)660 x 504 x 270/290 mmDrain1½-inch drain beadLevel markingsYesUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, nominal power 600 WVibration systems11 at the base, 5 on the sideUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepOperating voltage230 V AC (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V)Protection rating of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight23.9 kg / 48.0 kgPackagingPallet 1200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryOscillating tank TE 1059GT 1003 M-C ultrasonic generatorControl unit ST 15.1Film test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceIndividual procurement is required for the SW 58 Z built-in rinsing basin, the SM 29 silicone studded mat, the G 1½ Type V drain fitting or other accessories. You can request a quote for this via our procurement service, as well as for other models in the SONOREX ZE range.

With a built-in ultrasonic bath, the control unit determines the extent to which settings can be adjusted and monitored. The Bandelin SONOREX ZE 1031 DT features the ST 30.1 DT control unit, which includes push-button controls, a temperature sensor, a temperature display and an over-temperature warning. Beneath this is the TE 1031 oscillating tank, with a capacity of 29.0 l, designed for under-counter installation.ST 30.1 DT control unitThe time can be selected from eight fixed settings: 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); alternatively, the bath can run in continuous operation. Functions include the pulse function, sweep and the DEGAS rapid degassing function for freshly prepared liquids. The temperature sensor provides the readings for the display; the control unit issues a warning in the event of an overtemperature. The bath switches off automatically after 12 hours.TE 1031 bath and generatorThe internal dimensions are 510 x 300 mm with a depth of 200/220 mm; the base is sloped and the corners are rounded. The material is 1.4404 stainless steel with a thickness of 2.0 mm. Eight vibration systems on the base are powered by the GT 503 M-C ultrasonic generator: 300 watts rated power, 1,200 watts peak power, 35 kHz. The generator has its own aluminium housing (360 x 310 x 142 mm, IP 20) with a mounting bracket for vertical installation. A 2 m long connection cable leads to the tank.Of the 29.0-litre capacity, 20.0 l is the working volume; a level mark indicates the fill level. The drain is located in a 1½-inch bead. The oscillating tank measures 570 x 360 x 270/290 mm externally and has an IP 30 protection rating.The difference compared to the ZE 1031 with a rotary handleThe mechanics and performance of the SONOREX ZE 1031 are the same; the tank and generator are identical. The ZE 1031 features the ST 15.1 control unit with a rotary knob and timers ranging from 1 to 15 minutes. The DT version also features a temperature display, DEGAS and a 30-minute timer setting. If you need to keep an eye on the bath temperature, choose the DT. If you only need times up to 15 minutes, the rotary knob will suffice. The SONOREX ZE 1032 DT offers higher sound power and additional side oscillators whilst maintaining the same tank volume.Installation notesThe bath and generator are separate units; the 2-metre length of the connection cable determines the distance between them. The generator has degree of protection IP 20 and is mounted vertically using the mounting bracket; the oscillating tank has IP 30. These ratings should be taken into account when planning the installation location, as must the permissible ambient temperature of 5 to 40 °C. The FT 36 film test frame is included with the kit.Typical applicationsCleaning of medical instruments with controlled timing and visible bath temperatureGentle cleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionDegassing of freshly prepared cleaning fluid prior to the actual cleaning cycleFrequently asked questionsHow long can the bath run continuously?The automatic safety shut-off activates after 12 hours, even during continuous operation.Is the temperature sensor included in the scope of delivery?Yes, it is supplied as part of the ST 30.1 DT control unit.What is the mains connection specification?230 V~ (± 10 %) at 50/60 Hz; the current consumption is 1.4 A. The mains cable is permanently attached to the unit.Technical detailsControl unitST 30.1 DT with buttons, temperature sensor, temperature display, over-temperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursCapacity / Working volume29.0 l / 20.0 lInternal dimensions of tank (L x W x D)510 x 300 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1031, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)570 x 360 x 270/290 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, rated power 300 W, 8 vibration systems on the baseUltrasonic generatorGT 503 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationDrainBead 1 ½ inchesLevel markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption1.4 A (230 V), 2.8 A (115 V)Degree of protection, oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight16.7 kg / 20.3 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1031 ultrasonic bathGT 503 M-C ultrasonic generatorControl unit ST 30.1 DT with temperature sensorFilm test frame FT 362 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, hanging tray, studded mat and drain fitting are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 29 EM insert basket, the KT 30 and KT 30 Z basket supports, the D 30 lid, the D 1031 G hinged lid, the KW 28-0 hanging tray, the SM 29 studded mat, the G 1 ½ Type V drain fitting or the SW 31 Z built-in rinsing tray, individual procurement is required. You can request a quote for accessories and other models in the SONOREX ZE range, with no obligation, via our procurement service.

In the 29-litre class of the SONOREX ZE range, the Bandelin SONOREX ZE 1032 DT offers the highest ultrasonic power, which the ZE 1032 also has, and the control unit with the most functions. This built-in ultrasonic bath for under-counter installation combines 1,760 watts of peak power and TwinSonic technology with the ST 30.1 DT control unit, which displays the temperature and features an overtemperature warning.1,760 watts across twelve vibration systemsThe GT 504 M-C ultrasonic generator delivers 440 watts of nominal power and up to 1,760 watts of peak power at 35 kHz. This power is distributed across eight vibration systems at the base of the TE 1032 tank and four on the side. Bandelin calls this principle ‘TwinSonic’, which is designed to reduce acoustic dead zones without causing the basket to oscillate. The generator is housed in an aluminium casing with IP 20 rating, measuring 360 x 310 x 142 mm, and features mounting brackets for vertical installation. The connection cable to the tank is 2 m long.Control unit with temperature sensorUsing the buttons on the ST 30.1 DT, you can select one of eight time settings (1, 2, 3, 4, 5, 10, 15 or 30 minutes, ± 5 %) or continuous operation. You can also select the pulse function, sweep and DEGAS rapid degassing. The display shows the bath temperature; the controller issues a warning in the event of overtemperature and switches off automatically after 12 hours.The tankInternal dimensions 510 x 300 mm, depth 200/220 mm, sloping base, rounded corners: these are the specifications of the TE 1032 tank. The 1.4404 stainless steel is 2.0 mm thick. The working capacity is 20.0 l, the total capacity is 29.0 l, and there is a fill level mark. Externally, the oscillating tank measures 570 x 404 x 270/290 mm and has an IP 30 protection rating. The drain is located in a 1½-inch bead.Which of the four 29-litre models?The ZE 1031 has bottom ultrasonic waves, 1200 watts and the ST 15.1 rotary handle control.The ZE 1031 DT has the same power output as the ZE 1031, but features the ST 30.1 DT control.The ZE 1032 has bottom and side ultrasonic waves with 1,760 watts and the rotary handle.The ZE 1032 DT combines bottom and side ultrasonic cleaning with the ST 30.1 DT control unit.If you need to monitor the bath temperature or work with DEGAS when cleaning medical instruments, the 1032 DT is suitable. For time-only control, the ZE 1032 is sufficient.Typical applicationsCleaning of medical instrumentsIntensive yet gentle cleaning of sensitive micro-instruments using the automatic sweep frequency functionUltrasonic cleaning with bottom and side ultrasonic waves (TwinSonic)Degassing of freshly prepared solution using DEGASFrequently asked questionsDo I need to order a temperature sensor separately?No, it is included in the scope of delivery for the ST 30.1 DT control unit.How much space do I need for the tank and generator?The ultrasonic tank measures 570 x 404 x 270/290 mm externally, and the generator measures 360 x 310 x 142 mm. Both are connected via a 2-metre-long cable.How much does it weigh?19.0 kg net, 22.6 kg gross when shipped in a carton measuring 670 x 470 x 565 mm.Technical detailsCapacity / Working capacity29.0 l / 20.0 lInternal dimensions of tank (L x W x D)510 x 300 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1032, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)570 x 404 x 270/290 mmDrainBead 1½ inchLevel markingsYesUltrasonic frequency35 kHzUltrasonic powerPeak power 1,760 W, nominal power 440 WVibration systems8 at the base, 4 on the sideUltrasonic generatorGT 504 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 30.1 DT with push-buttons, temperature sensor, temperature display, overtemperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursOperating voltage230 V AC (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2 A (230 V)Protection rating of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight19.0 kg / 22.6 kgPackagingCarton 670 x 470 x 565 mmMedical device classClass I (Regulation (EU) 2017/745)ComplianceLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1032 oscillating tankGT 504 M-C ultrasonic generatorControl unit ST 30.1 DT with temperature sensorFilm test frame FT 362 m connection cable (AMP-CPC plug) to the generatorBasket, basket support, lid, insert tank, studded mat and drain fitting are not included.Individual requirements and procurement serviceFor the K 29 EM insert basket, the KT 30 and KT 30 Z basket supports, the D 30 lid, the D 1031 G hinged lid, the KW 28-0 insert tank, the SM 29 studded mat or the G 1½ Type V drain fitting, individual procurement is required. You can request a quote via our procurement service, as well as for any other model in the SONOREX ZE range.

The Bandelin SONOREX ZE 1058 DT is a 46-litre built-in ultrasonic bath with a temperature sensor: the ST 30.1 DT control unit displays the temperature and issues a warning in the event of overtemperature. The bath is designed for under-counter installation and has a peak power output of 2,400 watts.Temperature, time and degassingThe ST 30.1 DT is operated via push-buttons. The time can be set to one of eight levels (1, 2, 3, 4, 5, 10, 15 and 30 minutes, ± 5 %); there is also a continuous operation mode. Functions include pulse mode, sweep and the DEGAS rapid degassing function. The temperature sensor feeds the display, and a warning indicates if the temperature is too high. An automatic safety shut-off is activated after 12 hours.TE 1058.2 tank and GT 1003 M-C generator600 x 400 mm internal dimensions, 200/220 mm depth, sloping base and rounded corners: The tank, made of 1.4404 stainless steel (2.0 mm thick), has a capacity of 46.0 l and a working volume of 32.0 l, a fill level mark and a 1½-inch drain bead. There are 16 vibration systems mounted on the base. They are powered by the GT 1003 M-C ultrasonic generator, with a nominal power of 600 watts, a peak power of 2,400 watts and a frequency of 35 kHz. The generator can be mounted separately: aluminium housing with IP 20 rating, mounting bracket for vertical installation, 2 m connection cable.The net weight is 23.3 kg. In its carton measuring 1200 x 800 x 740 mm, the unit has a gross weight of 47.4 kg. The mains connection is 230 V~ (± 10 %) with a current consumption of 2.7 A.A comparison of the sister modelsThe SONOREX ZE 1058 has the same tank and the same generator, but is operated via the ST 15.1’s rotary handle and has neither a temperature display nor the DEGAS function. The SONOREX ZE 1059 DT has the same control system as the 1058 DT; the tank is 504 mm wide on the outside, and in addition to the 11 bottom vibration systems, there are 5 on the side. The 1058 DT is the model to choose if there is sufficient space for a width of 460 mm and bottom ultrasonic waves are sufficient.Installation and environmentThe tank and generator are installed separately. The oscillating tank has degree of protection IP 30, the generator IP 20, and both ratings must be taken into account when selecting the installation location. The permissible ambient temperature ranges from 5 to 40 °C. The generator is mounted vertically using the mounting bracket; the mains cable is permanently attached to the ST 30.1 DT control unit. The FT 37 film test frame is included in the kit. The G 1 ½ Type V drain fitting and the SONOREX SW 58 Z built-in rinsing tank are listed as accessories.Typical applicationsCleaning of medical instruments with visible bath temperatureGentle cleaning of sensitive micro-instruments using the automatic sweep frequency functionDegassing of freshly prepared solution using DEGAS prior to the cleaning cycleFrequently asked questionsIs a temperature sensor included?Yes, it is part of the ST 30.1 DT control unit.How long does the bath run in continuous operation?Until the automatic safety shut-off is triggered after 12 hours.How are the tank and the generator connected?Via a 2 m long connection cable with an AMP-CPC plug.Which basket support is suitable?For this tank size, the KT 57 and KT 57 Z basket supports with handles are listed.Technical detailsControl unitST 30.1 DT with buttons, temperature sensor, temperature display, over-temperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 mins (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, nominal power 600 W, 16 vibration systems on the baseUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of tank (L x W x D)600 x 400 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1058.2, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)660 x 460 x 270/290 mmDrainBead 1½ inchFill level markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V), 5.3 A (115 V)Protection rating of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight23.3 kg / 47.4 kgPackagingCarton 1200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryOscillating tank TE 1058.2Ultrasonic generator GT 1003 M-CControl unit ST 30.1 DT with temperature sensorFilm test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceFor the K 29 EM insert basket, the D 57 lid, the D 1058 G hinged lid, the SM 29 silicone studded mat, the G 1 ½ Type V drain fitting or the SW 58 Z built-in rinsing tank, individual procurement is required. You can request a quote for this via our procurement service, as well as for other models in the SONOREX ZE range.

The Bandelin SONOREX ZE 1059 DT is the built-in ultrasonic bath with the most advanced technology in the 46-litre class of the ZE series: TwinSonic with bottom and side ultrasonic waves, plus the ST 30.1 DT control unit with temperature display and DEGAS. It is designed for under-counter installation.What’s inside the ZE 1059 DTTE 1059 tank with a capacity of 46.0 l and a working volume of 32.0 l11 transducers at the base, 5 on the sidesGT 1003 M-C generator with a rated power of 600 watts and a peak power of 2,400 watts at 35 kHzST 30.1 DT control unit with temperature sensor, temperature display, over-temperature warning and push-button controlsPulse function, sweep, DEGAS rapid degassing and safety shut-off after 12 hoursControlsThere are eight time settings to choose from: 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %). There is also a continuous operation mode. The DEGAS rapid degassing function degasses freshly prepared liquid. The temperature display is part of the control unit; the temperature probe is supplied with the bath. Those who can do without the temperature display and DEGAS function can opt for the SONOREX ZE 1059 with a rotary knob, which features the same bath and generator.Sound distribution and tankAccording to the manufacturer, TwinSonic distributes the sound throughout the bath and reduces sound shadows without the basket having to oscillate. The base of the tank (600 x 400 mm, depth 200/220 mm) is sloped, the corners are rounded, and the drain bead is 1½ inches. The 1.4404 stainless steel is 2.0 mm thick. The external dimensions of the oscillating tank are 660 x 504 x 270/290 mm. A fill level mark is provided.Compared to the ZE 1058 DTThe SONOREX ZE 1058 DT has the same control system, a 46.0-litre capacity and a peak power output of 2,400 watts. The difference lies in the ultrasonic transducers: 16 bottom transducers on the 1058 DT, 11 plus 5 on the ZE 1059 DT. The external width is 460 mm compared with 504 mm, and the net weight is 23.3 kg compared with 23.9 kg. The GT 1003 M-C ultrasonic generator is the same in both units.Installation and accessoriesThe generator is given its own space: the aluminium housing (360 x 310 x 142 mm, IP 20) is mounted vertically using the mounting bracket and connected to the tank via a 2 m long cable with an AMP-CPC plug. The oscillating tank has an IP 30 protection rating; the ambient temperature may be between 5 and 40 °C. The FT 37 foil test frame is included in the kit. Accessories listed include the KT 57 and KT 57 Z basket supports, the K 29 EM insert basket, the D 57 lid and the D 1058 G hinged lid.Typical applicationsCleaning of medical instrumentsGentle cleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionUltrasonic cleaning with bottom and side ultrasonic waves, with visible bath temperatureFrequently asked questionsDo I need an additional temperature sensor?No, the temperature sensor is part of the ST 30.1 DT control unit included in the scope of delivery.How is the bath delivered?On a pallet measuring 1,200 x 800 x 740 mm, gross weight 48.0 kg.What are the connected loads?230 V~ (± 10 %), 50/60 Hz with a current draw of 2.7 A.Technical detailsCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of tank (L x W x D)600 x 400 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1059, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)660 x 504 x 270/290 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, rated power 600 WVibration systems11 at the base, 5 on the sideUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 30.1 DT with push-buttons, temperature sensor, temperature display, overtemperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursDrainBead 1 ½ inchesFill level markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V)Degree of protection of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight23.9 kg / 48.0 kgPackagingPallet 1,200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1059 oscillating tankGT 1003 M-C ultrasonic generatorControl unit ST 30.1 DT with temperature sensorFoil test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting must be ordered separately.Individual requirements and procurement serviceIndividual procurement requirements apply to the SM 29 silicone studded mat, the G 1½ Type V drain fitting, the SW 58 Z built-in rinsing basin or other accessories. You can request a quote without obligation via our procurement service.