Skip to main content Skip to search Skip to main navigation

Memmert incubator IN55mplus, 53 l, +20 to +80 °C, TwinDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert incubator IN55mplus, 53 l, +20 to +80 °C, TwinDISPLAY"

With 53 litres, the Memmert incubator IN55mplus offers slightly more internal space than the smallest model in the series and takes up to four shelves. It is a Class I medical device under Regulation (EU) 2017/745 and is used for warming irrigation and infusion solutions and contrast media. A stainless steel grid shelf is part of the standard scope of delivery.

ControlCOCKPIT TwinDISPLAY

Two TFT colour graphic displays belong to the ControlCOCKPIT TwinDISPLAY, which controls the IN55mplus and is an adaptive digital PID microprocessor controller. The temperature is measured by two Pt100 sensors of DIN class A in 4-wire measurement, which monitor each other; if one fails, the intact sensor takes over the function of the other. The setting temperature range is between +20 and +80 °C with a setting accuracy of 0.1 °C, and the working temperature range starts at least 5 °C above room temperature.

Monitoring and protection

The heating switches off automatically at around 20 °C above the maximum permissible cabinet temperature; a mechanical temperature limiter of protection class 1 according to DIN 12880 is responsible for this. In addition, an adjustable temperature monitor of protection class 3.1 or an adjustable temperature limiter of protection class 2 can be set on the display. AutoSAFETY monitors overshoots and undershoots at a freely selectable distance from the setpoint, reports them visually and audibly, and switches the heating off in the event of an overshoot. A self-diagnosis system supports fault finding, and a permanently installed program sterilises the interior (4 hours, 160 °C), not the load.

Functions and data transfer

With the HeatBALANCE function, the heating power can be shifted between the upper and lower heating group in the range from -50 to +50 %, and SetpointWAIT starts the process time at the point when the setpoint temperature is reached. Three temperature values can be freely calibrated, and the program sequence remains stored in the event of a power failure. An Ethernet connection and a USB port are available for creating, managing and transferring programs, used with the AtmoCONTROL software.

Construction, loading and connected load

Easy-care stainless steel with deep-drawn ribbing and four-sided all-round heating forms the interior, and the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel. Natural ventilation admixes preheated fresh air via an electronically adjustable flap, and an electronically adjustable throttle valve at the exhaust air port regulates the exhaust air. Internal: 400 x 400 x 330 mm, external: 585 x 784 x 514 mm (plus 56 mm door handle), net weight around 57 kg. A total load of 80 kg is permitted, with a maximum of 20 kg per shelf. Connection is made with 230 V (approx. 1,000 W) or 115 V (approx. 900 W), each 50/60 Hz.

The IN55m compared

The equally sized IN55m has a different intended purpose: warming and keeping warm of fango, silicate and APS packs in physiotherapy, also as a Class I medical device. Instead of the two TFT displays and the redundant sensor pairing of the IN55mplus, the IN55m is controlled via a SingleDISPLAY with a single Pt100 sensor.

Selection guide

For smaller quantities, the Memmert incubator IN30mplus with 32 litres, up to three shelves and 60 kg total load is sufficient. Those who need more space will find it with the IN75mplus with 74 litres, two grid shelves as standard and up to six shelves at 120 kg total load.

Typical applications

The IN55mplus is intended, as a class I medical device, for warming irrigation and infusion solutions and contrast media.

  • Warming irrigation solutions
  • Warming infusion solutions
  • Warming contrast media

Technical details

Setting temperature range+20 to +80 °C
Working temperature rangemin. 5 °C above room temperature to +80 °C
Temperature setting accuracy0.1 °C
Temperature sensor2x Pt100, DIN class A, 4-wire measurement, redundant
Internal volume53 l
Internal dimensions (W x H x D)400 x 400 x 330 mm
External dimensions of housing (W x H x D)585 x 784 x 514 mm (plus 56 mm door handle)
Net weightapprox. 57 kg
Connection230 V, 50/60 Hz, approx. 1,000 W; 115 V, 50/60 Hz, approx. 900 W
Shelves in scope of delivery1
Maximum shelves4
Max. load of unit80 kg
Max. load per shelf20 kg
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic display
Additional functionsHeatBALANCE, SetpointWAIT, AutoSAFETY, visual and audible alarm
Medical device classificationClass I under Regulation (EU) 2017/745
Intended purposeWarming of irrigation and infusion solutions and contrast media
Permissible ambient temperature5 °C to 40 °C
Permissible humiditymax. 80 % rh, non-condensing
Shipping carton (W x H x D)730 x 950 x 670 mm
MarkingsCE, VDE, UL

Other sizes in the series

The IN55mplus is one of eight sizes in the IN-mplus series from 32 to 749 litres, all with TwinDISPLAY and the same setting temperature range of +20 to +80 °C.

ModelInternal volumeSetting temperatureDisplay
IN30mplus32 l+20 to +80 °CTwinDISPLAY
IN55mplus (this page)53 l+20 to +80 °CTwinDISPLAY
IN75mplus74 l+20 to +80 °CTwinDISPLAY
IN110mplus108 l+20 to +80 °CTwinDISPLAY
IN160mplus161 l+20 to +80 °CTwinDISPLAY
IN260mplus256 l+20 to +80 °CTwinDISPLAY
IN450mplus449 l+20 to +80 °CTwinDISPLAY
IN750mplus749 l+20 to +80 °CTwinDISPLAY

Scope of delivery

  • Factory calibration certificate (calibration at +37 °C)
  • Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
  • 1x stainless steel grid shelf, electropolished

Regulatory information

The device is electrical equipment within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Notes on returning old appliances can be found on our page Environment and disposal. The IN55mplus is also classified as a Class I medical device under Regulation (EU) 2017/745, with the intended purpose of warming irrigation and infusion solutions and contrast media.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29730) or without air slots (B29731). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

For the IN55mplus, Memmert offers options, accessories and services, and options are specified at the factory with the order. We clarify your individual requirements, from the suitable option to additional accessories, and organise the procurement. Get in touch for non-binding advice. As factory options, Memmert also offers DAkkS calibration according to DKD-R 5-7, IQ/OQ documents and IQ/OQ qualification. We order these with the device on request.

Volume: 53 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20164 for sizes 50, 55 and 75
Manufacturer number: E20164

The E20164 stainless steel grid is an electropolished shelf for Memmert cabinets in sizes 50, 55 and 75. It fits universal ovens, incubators, Peltier cooling incubators and the HCP50 humidity chamber, 37 models in total. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UF55 or UN55.The load per shelf is 20 kg for all models, only for the HCP50 it is 15 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Environmental tests and environmental simulations in the HCP50 humidity chamberSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf. The HCP50 comes with a perforated shelf as standard; the grid is optional there.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UF55142053UF55plus142053UN55142053UN55plus142053UF75262074UF75plus262074UN75262074UN75plus262074UF55m142053UF55mplus142053UN55m142053UN55mplus142053UF75m262074UF75mplus262074UN75m262074UN75mplus262074UN55pa142053UN75pa262074IF55142053IF55plus142053IN55142053IN55plus142053IF75262074IF75plus262074IN75262074IN75plus262074IF55m142053IF55mplus142053IN55m142053IN55mplus142053IF75m262074IF75mplus262074IN75m262074IN75mplus262074IPP55142053IPP55plus142053HCP501 (perforated shelf)51556The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP50Scope of delivery1 stainless steel grid, electropolished (E20164)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €65.36
memmert rohrverlaengerung gerade
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29718

The straight slip-on pipe extension B29718 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The angled version is also available (B29719). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 straight slip-on pipe extensionIndividual requirements & procurement serviceFor the angled version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €41.28
memmert rohrverlaengerung gewinkelt
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29719

The angled slip-on pipe extension B29719 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The straight version is also available (B29718). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material samples in series, for example in the UN260Testing and curing of larger components in quality assurance, for example in the UF750Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 angled slip-on pipe extensionIndividual requirements & procurement serviceFor the straight version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €108.36
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768

The B29768 set of levelling feet contains 4 pieces. With levelling feet, the unit can be aligned horizontally.The set is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. The table of compatible models shows which series is available in which size. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorEmbedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenParallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoSuitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574UN160pa160161IF30plus3032IN30plus3032IF303032IN303032IF160160161IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UN55pa5553UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032IPP260eco260256IPP260ecoPlus260256HPP110eco110108HPP260eco260256IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF160TS160161UF260TS260256Scope of delivery1 set of levelling feet (4 pieces)Individual requirements & procurement serviceFor base frames, further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €46.44
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
Manufacturer number: B29744

The B29744 stacking kit consists of 4 pieces and is intended for stacking units of the same size. It is intended for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco, HCP and IFbw series in sizes 30, 50, 55, 75, 105 and 110. The size corresponds to the number in the unit name, for example UF30 or UN30.Separate stacking kits are also available for HCP150, HCP240 and for ICO50, 180 and 240 (B42114, B48129, B68362 and B64732). The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorIncubating several sample series at the same time in research and medicine, for example in the IF110Environmental tests and environmental simulations in the HCP105 humidity chamberSuitable forModelSizeInterior volume (l)IF110bw110108UF303032IF110110108UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574IF30plus3032IN30plus3032IF303032IN303032IF55plus5553IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553UF110plus110108UN110110108UN110plus110108IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032HPP110eco110108HCP505056HCP105105107IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108Scope of delivery1 stacking kit (4 pieces)Individual requirements & procurement serviceFor the stacking kits for HCP humidity chambers and ICO CO₂ incubators, for base frames and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €61.92
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02072 for sizes 55 and 75
Manufacturer number: B02072

The stainless steel slide-in drip tray B02072 is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 1.5 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04358). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €74.82
memmert untergestell nivellierbar
Memmert levelling base frame B29747, height 600 mm, for sizes 55 and 75
Manufacturer number: B29747

B29747 is a levelling base frame with a height of 600 mm for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.A flat base frame with a height of 130 mm is also available (B33659). The mobile version with a height of 660 mm is also available (B29748). The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight600 mmScope of delivery1 levelling base frame, height 600 mmIndividual requirements & procurement serviceFor the flat and the mobile version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €300.14
Memmert levelling base frame B33659, height 130 mm, for sizes 55 and 75
Manufacturer number: B33659

The levelling base frame B33659, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.The base frame B29747 with a height of 600 mm is also available for these sizes. The table of compatible models shows which series is available in which size.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Vibration-free drying of dust- or air-sensitive samples and powders, for example in the UN55Incubating several sample series in parallel in research and medicine, for example in the IF75Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenValidatable cooled incubation with documented, redundant temperature monitoring, for example in the IPP55plusSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €233.06
memmert untergestell fahrbar
Memmert mobile base frame B29748, height 660 mm, for sizes 55 and 75
Manufacturer number: B29748

The mobile base frame B29748 is 660 mm high.It is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The levelling version with a height of 600 mm is also available (B29747), as is a flat base frame with a height of 130 mm (B33659). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF55 or UN55.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight660 mmScope of delivery1 mobile base frame, height 660 mmIndividual requirements & procurement serviceFor the flat and the levelling version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €444.62
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68507 for sizes 55 and 75
Manufacturer number: B68507

B68507 is a stainless steel perforated tray for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UF55 or UN55. The image is for illustration only.Memmert specifies 20 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Suitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €120.40
Memmert Wandkonsole
Memmert wall bracket B29756 for size 55
Manufacturer number: B29756

The wall bracket B29756 is intended for wall mounting of Memmert units in the I, Im, U, UNpa and Um series in size 55. The table of compatible models shows which series is available in this size. The image is a Memmert drawing and is for illustration only. The size corresponds to the number in the unit name, for example IF55 or IN55.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubation of several parallel series of culture media in routine microbiology, for example in the IN55Embedding and heating of paraffin or wax for histology, for example in the UN55paSuitable forModelSizeInterior volume (l)IF555553IN555553IF55plus5553IN55plus5553IF55m5553IN55m5553IF55mplus5553IN55mplus5553UF555553UN555553UF55plus5553UN55plus5553UN55pa5553UF55m5553UN55m5553UF55mplus5553UN55mplus5553Scope of delivery1 wall bracket for wall mountingIndividual requirements & procurement serviceFor questions about wall mounting and about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €258.86
memmert boden abtropfschale
Memmert stainless steel base drip tray B04358 for sizes 55 and 75
Manufacturer number: B04358

B04358 is a stainless steel base drip tray with a 15 mm rim for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It collects dripping liquid. According to Memmert, the maximum load is 1.5 kg per base drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02072). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €115.24