Skip to main content Skip to search Skip to main navigation

Memmert incubator IN75m, 74 l, +20 to +80 °C, SingleDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert incubator IN75m, 74 l, +20 to +80 °C, SingleDISPLAY"

The Memmert incubator IN75m is a Class I medical device under Regulation (EU) 2017/745. The intended purpose is the warming and keeping warm of fango, silicate and APS packs in physiotherapy. With 74 litres internal volume and internal dimensions of 400 x 560 x 330 mm, two electropolished stainless steel grid shelves are included as standard, and up to six shelves are possible.

ControlCOCKPIT SingleDISPLAY and time control

The core of the control system is the ControlCOCKPIT SingleDISPLAY with an adaptive, multifunctional PID microprocessor controller and a high-resolution TFT colour graphic display. A Pt100 sensor of DIN class A supplies the measured values using 4-wire technology, and the setting accuracy is 0.1 °C. SetpointWAIT only starts counting the process time once the setpoint temperature has been reached, and the digital countdown timer can be programmed from 1 minute to 99 days. Three temperature values can be freely calibrated.

Ventilation and safety technology

An electronically adjustable exhaust air flap admixes preheated fresh air into the natural ventilation, supplemented by an exhaust air port with an electronically controllable throttle valve. For protection against over-temperature, a mechanical temperature limiter TB protection class 1 according to DIN 12880 switches the heating off at around 20 °C above the maximum cabinet temperature, and an adjustable electronic temperature monitoring system and a self-diagnosis system for fault finding are added. After a power failure, the program sequence remains stored. The data logger is read out via Ethernet with a time-limited trial version of AtmoCONTROL, and a USB stick with the software is available as an accessory.

Loading, interior and connection

Easy-care, deep-drawn ribbed stainless steel forms the interior, and the 4-sided all-round heating is integrated behind it, protected. Two electropolished stainless steel grid shelves are included in the scope of delivery, up to six shelves fit, and a total of 120 kg is permitted at 20 kg per shelf. The fully insulated stainless steel door closes via a 2-point locking system with compression door lock and has an inner glass door. Connection is made with 230 V at approx. 1,250 W or with 115 V at approx. 900 W, each 50/60 Hz. Externally, the IN75m measures 585 x 944 x 514 mm plus 56 mm door handle, with a net weight of around 66 kg.

Distinction: laboratory device IN75 and medical device IN75mplus

In the same size, there is the Memmert incubator IN75 without a medical intended purpose. The IN75mplus also has 74 litres, but shows the values via a ControlCOCKPIT TwinDISPLAY, not via SingleDISPLAY, and serves a different purpose: warming irrigation and infusion solutions and contrast media, not the warming of fango, silicate and APS packs.

Selection guide: which size fits

Smaller is the IN55m with 53 litres, four shelves and 80 kg total load. With the next larger IN110m, volume (108 litres) and total load (175 kg) increase, but the number of shelves drops to five. With six shelves, the IN75m therefore offers one shelf more than the larger IN110m.

Typical applications

As a Class I medical device, the IN75m is intended exclusively for the physiotherapeutic applications named in the intended purpose.

  • Warming of fango packs for physiotherapeutic use
  • Warming and keeping warm of silicate packs
  • Warming and keeping warm of APS packs

Technical details

Setting temperature range+20 to +80 °C
Working temperature rangemin. 5 °C above room temperature to +80 °C
Temperature setting accuracy0.1 °C
Temperature sensor1x Pt100, DIN class A, 4-wire measurement
Internal volume74 l
Internal dimensions (W x H x D)400 x 560 x 330 mm
External dimensions of housing (W x H x D)585 x 944 x 514 mm (plus 56 mm door handle)
Net weightapprox. 66 kg
Connection230 V, 50/60 Hz, approx. 1,250 W; 115 V, 50/60 Hz, approx. 900 W
Shelves in scope of delivery2
Maximum shelves6
Max. load of unit120 kg
Max. load per shelf20 kg
ControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphic display
Medical device classificationClass I under Regulation (EU) 2017/745
Intended purposeWarming/keeping warm of fango, silicate and APS packs in physiotherapy
Permissible ambient temperature5 °C to 40 °C
Permissible humiditymax. 80 % rh, non-condensing
MarkingsCE, VDE, UL

Other sizes in the series

The IN75m is one of eight sizes in the IN-m series from 32 to 749 litres, all with SingleDISPLAY and the same setting temperature range of +20 to +80 °C.

ModelInternal volumeSetting temperatureDisplay
IN30m32 l+20 to +80 °CSingleDISPLAY
IN55m53 l+20 to +80 °CSingleDISPLAY
IN75m (this page)74 l+20 to +80 °CSingleDISPLAY
IN110m108 l+20 to +80 °CSingleDISPLAY
IN160m161 l+20 to +80 °CSingleDISPLAY
IN260m256 l+20 to +80 °CSingleDISPLAY
IN450m449 l+20 to +80 °CSingleDISPLAY
IN750m749 l+20 to +80 °CSingleDISPLAY

Scope of delivery

  • Factory calibration certificate (calibration at +37 °C)
  • Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
  • 2x stainless steel grid shelf, electropolished

Regulatory information

The device is electrical equipment within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Notes on returning old appliances can be found on our page Environment and disposal. The IN75m is also classified as a Class I medical device under Regulation (EU) 2017/745, with the intended purpose of warming and keeping warm of fango, silicate and APS packs in physiotherapy.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29732) or without air slots (B29733). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

For the IN75m, Memmert offers options, accessories and services, and options are specified at the factory with the order. Accessories include, for example, a USB stick with the AtmoCONTROL software. We clarify individual requirements, such as additional accessories or spare parts, on request. As factory options, Memmert also offers DAkkS calibration according to DKD-R 5-7, IQ/OQ documents and IQ/OQ qualification. We order these with the device on request.

Volume: 74 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20164 for sizes 50, 55 and 75
Manufacturer number: E20164

The E20164 stainless steel grid is an electropolished shelf for Memmert cabinets in sizes 50, 55 and 75. It fits universal ovens, incubators, Peltier cooling incubators and the HCP50 humidity chamber, 37 models in total. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UF55 or UN55.The load per shelf is 20 kg for all models, only for the HCP50 it is 15 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Environmental tests and environmental simulations in the HCP50 humidity chamberSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf. The HCP50 comes with a perforated shelf as standard; the grid is optional there.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UF55142053UF55plus142053UN55142053UN55plus142053UF75262074UF75plus262074UN75262074UN75plus262074UF55m142053UF55mplus142053UN55m142053UN55mplus142053UF75m262074UF75mplus262074UN75m262074UN75mplus262074UN55pa142053UN75pa262074IF55142053IF55plus142053IN55142053IN55plus142053IF75262074IF75plus262074IN75262074IN75plus262074IF55m142053IF55mplus142053IN55m142053IN55mplus142053IF75m262074IF75mplus262074IN75m262074IN75mplus262074IPP55142053IPP55plus142053HCP501 (perforated shelf)51556The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP50Scope of delivery1 stainless steel grid, electropolished (E20164)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €65.36
memmert rohrverlaengerung gerade
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29718

The straight slip-on pipe extension B29718 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The angled version is also available (B29719). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 straight slip-on pipe extensionIndividual requirements & procurement serviceFor the angled version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €41.28
memmert rohrverlaengerung gewinkelt
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29719

The angled slip-on pipe extension B29719 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The straight version is also available (B29718). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material samples in series, for example in the UN260Testing and curing of larger components in quality assurance, for example in the UF750Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 angled slip-on pipe extensionIndividual requirements & procurement serviceFor the straight version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €108.36
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768

The B29768 set of levelling feet contains 4 pieces. With levelling feet, the unit can be aligned horizontally.The set is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. The table of compatible models shows which series is available in which size. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorEmbedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenParallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoSuitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574UN160pa160161IF30plus3032IN30plus3032IF303032IN303032IF160160161IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UN55pa5553UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032IPP260eco260256IPP260ecoPlus260256HPP110eco110108HPP260eco260256IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF160TS160161UF260TS260256Scope of delivery1 set of levelling feet (4 pieces)Individual requirements & procurement serviceFor base frames, further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €46.44
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
Manufacturer number: B29744

The B29744 stacking kit consists of 4 pieces and is intended for stacking units of the same size. It is intended for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco, HCP and IFbw series in sizes 30, 50, 55, 75, 105 and 110. The size corresponds to the number in the unit name, for example UF30 or UN30.Separate stacking kits are also available for HCP150, HCP240 and for ICO50, 180 and 240 (B42114, B48129, B68362 and B64732). The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorIncubating several sample series at the same time in research and medicine, for example in the IF110Environmental tests and environmental simulations in the HCP105 humidity chamberSuitable forModelSizeInterior volume (l)IF110bw110108UF303032IF110110108UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574IF30plus3032IN30plus3032IF303032IN303032IF55plus5553IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553UF110plus110108UN110110108UN110plus110108IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032HPP110eco110108HCP505056HCP105105107IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108Scope of delivery1 stacking kit (4 pieces)Individual requirements & procurement serviceFor the stacking kits for HCP humidity chambers and ICO CO₂ incubators, for base frames and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €61.92
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02072 for sizes 55 and 75
Manufacturer number: B02072

The stainless steel slide-in drip tray B02072 is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 1.5 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04358). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €74.82
memmert untergestell nivellierbar
Memmert levelling base frame B29747, height 600 mm, for sizes 55 and 75
Manufacturer number: B29747

B29747 is a levelling base frame with a height of 600 mm for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.A flat base frame with a height of 130 mm is also available (B33659). The mobile version with a height of 660 mm is also available (B29748). The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight600 mmScope of delivery1 levelling base frame, height 600 mmIndividual requirements & procurement serviceFor the flat and the mobile version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €300.14
Memmert levelling base frame B33659, height 130 mm, for sizes 55 and 75
Manufacturer number: B33659

The levelling base frame B33659, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.The base frame B29747 with a height of 600 mm is also available for these sizes. The table of compatible models shows which series is available in which size.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Vibration-free drying of dust- or air-sensitive samples and powders, for example in the UN55Incubating several sample series in parallel in research and medicine, for example in the IF75Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenValidatable cooled incubation with documented, redundant temperature monitoring, for example in the IPP55plusSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €233.06
memmert untergestell fahrbar
Memmert mobile base frame B29748, height 660 mm, for sizes 55 and 75
Manufacturer number: B29748

The mobile base frame B29748 is 660 mm high.It is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The levelling version with a height of 600 mm is also available (B29747), as is a flat base frame with a height of 130 mm (B33659). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF55 or UN55.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight660 mmScope of delivery1 mobile base frame, height 660 mmIndividual requirements & procurement serviceFor the flat and the levelling version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €444.62
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68507 for sizes 55 and 75
Manufacturer number: B68507

B68507 is a stainless steel perforated tray for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UF55 or UN55. The image is for illustration only.Memmert specifies 20 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Suitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €120.40
Memmert Wandkonsole
Memmert wall bracket B29757 for size 75
Manufacturer number: B29757

The wall bracket B29757 is intended for wall mounting of Memmert units in the I, Im, U, UNpa and Um series in size 75. The table of compatible models shows which series is available in this size. The image is a Memmert drawing and is for illustration only. The size corresponds to the number in the unit name, for example IF75 or IN75.Typical applicationsExamples in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Incubating several sample series in parallel in research and medicine, for example in the IF75Material testing in the industrial manufacture of smaller components, for example in the UF75Suitable forModelSizeInterior volume (l)IF757574IN757574IF75plus7574IN75plus7574IF75m7574IN75m7574IF75mplus7574IN75mplus7574UF757574UN757574UF75plus7574UN75plus7574UN75pa7574UF75m7574UN75m7574UF75mplus7574UN75mplus7574Scope of delivery1 wall bracket for wall mountingIndividual requirements & procurement serviceFor questions about wall mounting and about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €268.32
memmert boden abtropfschale
Memmert stainless steel base drip tray B04358 for sizes 55 and 75
Manufacturer number: B04358

B04358 is a stainless steel base drip tray with a 15 mm rim for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It collects dripping liquid. According to Memmert, the maximum load is 1.5 kg per base drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02072). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €115.24