Skip to main content Skip to search Skip to main navigation

Memmert universal oven UF110m, 108 l, +20 to +300 °C, SingleDISPLAY

Product information "Memmert universal oven UF110m, 108 l, +20 to +300 °C, SingleDISPLAY"

The Memmert universal oven UF110m has 108 litres of internal volume and sits in the UF-m series between the UF75m with 74 litres and the UF160m with 161 litres. As a Class I medical device under Regulation (EU) 2017/745, the UF110m is also intended exclusively for the heating and keeping warm of fango, silicate and APS packs, controlled via the ControlCOCKPIT SingleDISPLAY with one Pt100 sensor.

Control and safety of the UF110m in detail

The ControlCOCKPIT SingleDISPLAY is at the centre of operation: an adaptive PID microprocessor controller that controls temperature, forced air circulation speed, exhaust air flap position and program run time via a TFT colour graphic display, supplemented by a countdown timer from 1 minute to 99 days and SetpointWAIT for the delayed start of the process time. Heat distribution in the 108-litre interior is provided by an air turbine that is electronically controllable in 10 % steps. The setting temperature range extends from 20 to 300 °C with a setting accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C, measured by a DIN class A Pt100 sensor. In the event of a power failure, the program run remains stored and can be read out via Ethernet with AtmoCONTROL. On the safety side, a DIN 12880 temperature limiter of protection class 1 complements the electronic monitoring, and a self-diagnosis system assists with troubleshooting.

Selection guide within the UF-m series

The housing is 864 mm high and 584 mm deep, plus 56 mm for the door handle, and the net weight is around 74 kg. The cabinet is transported upright, and at the installation site a distance of at least 15 cm from the wall and at least 5 cm at the sides must be observed. The interior of 560 x 560 x 480 mm holds up to 5 shelves, with a load capacity of 20 kg per shelf and 175 kg in total. One size smaller is the UF75m with 74 litres and up to 6 shelves, and one size larger is the UF160m with 161 litres and up to 8 shelves. For two redundant sensors and two displays, the sister model UF110mplus is available, and as a laboratory unit without classification as a medical device there is the Memmert universal oven UF110.

Typical applications

As a Class I medical device, the Memmert universal oven UF110m is intended exclusively for physiotherapeutic applications with fango, silicate and APS packs.

  • Heating of fango packs for physiotherapeutic use
  • Heating and keeping warm of silicate packs
  • Heating and keeping warm of APS packs

Technical details

Adjustable temperature range20 to 300 °C
Working temperature rangemin. 10 °C above room temperature to 300 °C
Temperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Temperature sensor1x Pt100, DIN class A, 4-wire measurement
Internal volume108 l
Internal dimensions (W x H x D)560 x 560 x 480 mm
External dimensions of housing (H x D)864 x 584 mm
Net weightapprox. 74 kg
Gross weight (packed)approx. 99 kg
Packaging dimensions (W x H x D)830 x 1,050 x 800 mm
Connection 230 V50/60 Hz, approx. 2,800 W
Connection 115 V50/60 Hz, approx. 1,800 W
Maximum number of shelves5
Shelves included in scope of delivery2
Max. load of unit175 kg
Max. load per shelf20 kg
Interior materialStainless steel, 4-sided all-round heating
Housing materialTextured stainless steel, galvanised sheet steel back panel
ControlControlCOCKPIT SingleDISPLAY, PID microprocessor controller, TFT colour graphic display
Permissible ambient temperature5 °C to 40 °C
Permissible humiditymax. 80 % rel., non-condensing
Medical device classificationClass I under Regulation (EU) 2017/745
Intended purposeHeating/keeping warm of fango, silicate and APS packs in physiotherapy
MarkingsCE, VDE, UL test marks

Other sizes in the series

The UF-m series comprises nine sizes between 32 and 1,060 litres of internal volume, all with ControlCOCKPIT SingleDISPLAY and an identical intended purpose for physiotherapy.

ModelInternal volumeSetting temperatureDisplay
UF30m32 l+20 to +300 °CSingleDISPLAY
UF55m53 l+20 to +300 °CSingleDISPLAY
UF75m74 l+20 to +300 °CSingleDISPLAY
UF110m (this page)108 l+20 to +300 °CSingleDISPLAY
UF160m161 l+20 to +300 °CSingleDISPLAY
UF260m256 l+20 to +300 °CSingleDISPLAY
UF450m449 l+20 to +300 °CSingleDISPLAY
UF750m749 l+20 to +300 °CSingleDISPLAY
UF1060m1,060 l+20 to +300 °CSingleDISPLAY

The UF110m is also available with two displays and two redundant sensors as the UF110mplus. As a laboratory unit without classification as a medical device, we also offer the Memmert universal oven UF110.

Scope of delivery

  • 1x Memmert universal oven UF110m
  • Factory calibration certificate (calibration at 160 °C)
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • 2x stainless steel grid shelf, electropolished

Regulatory information

The unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal. In addition, the Memmert universal oven UF110m is classified as a Class I medical device under Regulation (EU) 2017/745, with the intended purpose of heating and keeping warm fango, silicate and APS packs in physiotherapy.

Individual requirements and procurement service

For options, accessories and spare parts for the UF110m, we provide individual advice tailored to the workflows in your practice. Please contact us with your specific requirements.

Volume: 108 l