Skip to main content Skip to search Skip to main navigation

Memmert universal oven UF110mplus, 108 l, +20 to +300 °C, TwinDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert universal oven UF110mplus, 108 l, +20 to +300 °C, TwinDISPLAY"

The Memmert universal oven UF110mplus is a Class I medical device under Regulation (EU) 2017/745 with the intended purpose of heating and keeping warm fango, silicate and APS packs in physiotherapy. With 108 litres of internal volume and an internal width of 560 mm, it is larger than the UF75mplus with 74 litres, and two grid shelves are included as standard.

TwinDISPLAY, sensors and HeatBALANCE

Two Pt100 sensors of DIN class A monitor each other in 4-wire measurement and automatically take over the function of the other in the event of a fault. The setting accuracy is 0.1 °C up to a setpoint temperature of 99.9 °C and 0.5 °C from 100 °C, and the setting temperature range extends from +20 to +300 °C. Control is via the ControlCOCKPIT TwinDISPLAY with two TFT colour graphic displays, and the HeatBALANCE function allows fine adjustment of the heating power distribution from -50 to +50 % between the upper and lower heating group. Programming and documentation are done via the Ethernet interface or USB port with the AtmoCONTROL software, and the digital countdown timer can be set from 1 minute to 99 days.

Safety for everyday practice

A mechanical temperature limiter of protection class 1 according to DIN 12880 switches off the heating at around 20 °C above the maximum cabinet temperature, and an adjustable temperature monitor of protection class 3.1 or an adjustable temperature limiter of protection class 2 can also be selected on the display. The additional AutoSAFETY monitoring automatically follows the setpoint at a freely selectable distance and triggers a visual and audible alarm in the event of deviation. A self-diagnosis system helps with fault finding, and three freely selectable temperature values can be calibrated.

Loading, connection and dimensions

2 electropolished stainless steel grid shelves are included as standard, and up to 5 shelves are possible. The permissible total load is 175 kg at 20 kg per shelf. The UF110mplus is connected at 230 V with approx. 2,800 W or at 115 V with approx. 1,800 W, in each case 50/60 Hz. The internal dimensions are 560 x 560 x 480 mm and the external dimensions 745 x 864 x 584 mm, with a net weight of around 74 kg.

Distinction: physiotherapy unit and laboratory oven UF110plus

The laboratory unit of the same size is the Memmert universal oven UF110plus with 108 litres and TwinDISPLAY, designed for drying and tempering in laboratories and industry and without a medical intended purpose. In the same size and with the same intended purpose, the Class I medical device available is the UF110m in the SingleDISPLAY version with one Pt100 sensor. The UF110mplus, by contrast, has the TwinDISPLAY and two Pt100 sensors that monitor each other, plus the adjustable temperature monitor or adjustable temperature limiter selectable on the display and AutoSAFETY, as well as the HeatBALANCE function.

Selection guide: when the neighbouring size is a better fit

The next smaller UF75mplus has 74 litres and a 120 kg total load, but with up to six shelves it takes one shelf more than the UF110mplus. More volume and more shelves are offered by the Memmert universal oven UF160mplus with 161 litres, up to eight shelves and a 210 kg total load. The UF110mplus sits in between with 108 litres and a 175 kg total load.

Typical applications

As a Class I medical device, the Memmert universal oven UF110mplus is intended exclusively for physiotherapeutic applications with fango, silicate and APS packs.

  • Heating of fango packs for physiotherapeutic use
  • Heating and keeping warm of silicate packs
  • Heating and keeping warm of APS packs

Technical details

Setting temperature range+20 to +300 °C
Working temperature rangemin. 10 °C above room temperature to 300 °C
Temperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Temperature sensor2x Pt100, DIN class A, 4-wire measurement, redundant
Internal volume108 l
Internal dimensions (W x H x D)560 x 560 x 480 mm (depth minus 39 mm for the fan)
External dimensions of housing (W x H x D)745 x 864 x 584 mm
Net weightapprox. 74 kg
Connection230 V, 50/60 Hz, approx. 2,800 W; 115 V, 50/60 Hz, approx. 1,800 W
Shelves included in scope of delivery2
Maximum number of shelves5
Max. load of unit175 kg
Max. load per shelf20 kg
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic display
Additional functionsHeatBALANCE, AutoSAFETY, visual and audible alarm
Medical device classificationClass I under Regulation (EU) 2017/745
Intended purposeHeating/keeping warm of fango, silicate and APS packs in physiotherapy
Permissible ambient temperature5 °C to 40 °C
Permissible humiditymax. 80 % rh, non-condensing
MarkingsCE, VDE, UL

Other sizes in the series

The UF110mplus is one of nine sizes in the mplus series from 32 to 1,060 litres, all with TwinDISPLAY and the same setting temperature range of +20 to +300 °C.

ModelInternal volumeSetting temperatureDisplay
UF30mplus32 l+20 to +300 °CTwinDISPLAY
UF55mplus53 l+20 to +300 °CTwinDISPLAY
UF75mplus74 l+20 to +300 °CTwinDISPLAY
UF110mplus (this page)108 l+20 to +300 °CTwinDISPLAY
UF160mplus161 l+20 to +300 °CTwinDISPLAY
UF260mplus256 l+20 to +300 °CTwinDISPLAY
UF450mplus449 l+20 to +300 °CTwinDISPLAY
UF750mplus749 l+20 to +300 °CTwinDISPLAY
UF1060mplus1,060 l+20 to +300 °CTwinDISPLAY

Scope of delivery

  • 1x Memmert universal oven UF110mplus
  • Factory calibration certificate (calibration at +160 °C)
  • Fully insulated stainless steel door(s) with 2-point locking (compression door lock)
  • 2x stainless steel grid shelves, electropolished

Regulatory information

The unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Information on returning old appliances is available on our page Environment and disposal. The UF110mplus is also classified as a Class I medical device under Regulation (EU) 2017/745, with the intended purpose of heating and keeping warm fango, silicate and APS packs in physiotherapy.

Individual requirements and procurement service

For the UF110mplus, the 115 V voltage variant, extended over-temperature protection and a temperature throttle (factory limit on the maximum adjustable temperature) are available as options, among others. For accessories, we arrange additional grid shelves, perforated trays, drip trays, a wall bracket, a USB-Ethernet adapter or a base frame. For DAkkS calibration, IQ/OQ/PQ documentation and qualification or a maintenance contract, we will gladly arrange the right contact. Get in touch for individual advice on your practice equipment.

Volume: 108 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20165 for sizes 105, 110, 150 and 160
Manufacturer number: E20165

The E20165 stainless steel grid is an electropolished shelf for 43 Memmert models in sizes 105, 110, 150 and 160. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Suitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)IF110bw2520IF1102520IN110plus2520UF1102520UN110pa2520UN160pa2820IF1602820IN1602820IF110plus2520IF160plus2820IN160plus2820UF110plus2520UN1102520UN110plus2520UF1602820UF160plus2820UN1602820UN160plus2820IN1102520IPP110eco2520IPP110ecoplus2520HPP110eco2520HCP1052 (perforated shelf)615HCP1502 (perforated shelf)1015ICH1102520ICP1102520IN110m2520IN110mplus2520IF110m2520IF110mplus2520IN160m2820IN160mplus2820IF160m2820IF160mplus2820UN110m2520UN110mplus2520UF110m2520UF110mplus2520UN160m2820UN160mplus2820UF160m2820UF160mplus2820UF160TS2820The permissible total load of the unit also limits the loading. Please observe the information in the data sheet of the unit.Scope of delivery1 stainless steel grid, electropolished (E20165)

Manufacturer's RRP: €98.04
Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert reinforced stainless steel grid E29767 for sizes 110 and 160
Manufacturer number: E29767

The reinforced stainless steel grid E29767 is available for Memmert units in the U, Um, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160. It is electropolished and, according to Memmert, can bear up to 60 kg; for the standard grids of these sizes it is 20 kg per shelf. Please note the maximum load per unit, as it limits the total load across all shelves. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeIF110110IN110plus110UF110110IF160160IN160160IF110plus110IF160plus160IN160plus160UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160IN110110IPP110eco110IPP110ecoplus110HPP110eco110ICH110110ICP110110IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160Scope of delivery1 reinforced stainless steel grid, electropolished

Manufacturer's RRP: €257.14
memmert untergestell fahrbar
Memmert mobile base frame B29750, height 560 mm, for sizes 110 and 160
Manufacturer number: B29750

The mobile base frame B29750 is 560 mm high. It is designed for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. The levelling version with a height of 500 mm is available as B29749, a flat base frame with a height of 130 mm as B33661. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeIF110bw110IF110110IN110plus110UF110110UN110pa110UN160pa160IF160160IN160160IF110plus110IF160plus160IN160plus160UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160IN110110IPP110eco110IPP110ecoplus110HPP110eco110IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160Scope of delivery1 mobile base frame, height 560 mm

Manufacturer's RRP: €497.08
Memmert levelling base frame B33661, height 130 mm, for sizes 110 and 160
Manufacturer number: B33661

The levelling base frame B33661, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. The base frame B29749 with a height of 500 mm is also available for these sizes. The table of compatible models shows which series are available in which sizes.Suitable forModelSizeIF110bw110IF110110IN110plus110UF110110UN110pa110UN160pa160IF160160IN160160IF110plus110IF160plus160IN160plus160UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160IN110110IPP110eco110IPP110ecoplus110HPP110eco110IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160Scope of delivery1 levelling base frame, height 130 mm

Manufacturer's RRP: €273.48
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
Manufacturer number: B29744

The B29744 stacking kit consists of 4 pieces and is intended for stacking units of the same size. It is designed for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco, HCP and IFbw series in sizes 30, 50, 55, 75, 105 and 110. Separate stacking kits are available for HCP150, HCP240 and ICO50, ICO180 and ICO240 (B42114, B48129, B68362 and B64732). The table of compatible models shows which series are available in which sizes.Suitable forModelSizeIF110bw110UF3030IF110110UN3030UF30plus30UN30plus30UF5555UF55plus55UN5555UN55plus55UF7575UF75plus75UN75plus75IN110plus110UN7575UF110110UN110pa110UN75pa75IF30plus30IN30plus30IF3030IN3030IF55plus55IF110plus110UN30pa30IN55plus55IF5555IN5555IN75plus75IF75plus75UN55pa55UF110plus110UN110110UN110plus110IPP5555IN110110IN7575IF7575IPP55plus55IPP110eco110IPP3030IPP110ecoplus110IPP30plus30HPP110eco110HCP5050HCP105105IN30m30IN30mplus30IF30m30IF30mplus30IN55m55IN55mplus55IF55m55IF55mplus55IN75m75IN75mplus75IF75m75IF75mplus75IN110m110IN110mplus110IF110m110IF110mplus110UN30m30UN30mplus30UF30m30UF30mplus30UN55m55UN55mplus55UF55m55UF55mplus55UN75m75UN75mplus75UF75m75UF75mplus75UN110m110UN110mplus110UF110m110UF110mplus110Scope of delivery1 stacking kit (4 pieces)

Manufacturer's RRP: €61.92
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02073 for sizes 110 and 160
Manufacturer number: B02073

B02073 is a stainless steel slide-in drip tray with a 15 mm rim for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160. It collects dripping liquid. According to Memmert, the maximum load is 3 kg per slide-in drip tray. Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeIF110110IN110plus110UF110110UN110pa110UN160pa160IF160160IN160160IF110plus110IF160plus160IN160plus160UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160IN110110IPP110eco110IPP110ecoplus110HPP110eco110ICH110110ICP110110IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160UF160TS160Scope of delivery1 stainless steel slide-in drip tray, 15 mm rim

Manufacturer's RRP: €117.82
memmert boden abtropfschale
Memmert stainless steel base drip tray B04359 for sizes 110 and 160
Manufacturer number: B04359

The B04359 base drip tray is made of stainless steel and has a 15 mm rim. It is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160 and collects dripping liquid. According to Memmert, the maximum load per base drip tray for these sizes is 3 kg. According to Memmert, it can also impair the spatial temperature distribution. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeIF110110IN110plus110UF110110UN110pa110UN160pa160IF160160IN160160IF110plus110IF160plus160IN160plus160UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160IN110110IPP110eco110IPP110ecoplus110HPP110eco110ICH110110ICP110110IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160UF160TS160Scope of delivery1 stainless steel base drip tray, 15 mm rim

Manufacturer's RRP: €171.14
memmert untergestell nivellierbar
Memmert levelling base frame B29749, height 500 mm, for sizes 110 and 160
Manufacturer number: B29749

B29749 is a levelling base frame with a height of 500 mm for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. A flat base frame with a height of 130 mm is available as B33661. The mobile version with a height of 560 mm is available as B29750. The table of compatible models shows which series are available in which sizes. The image is for illustration only.Suitable forModelSizeIF110bw110IF110110IN110plus110UF110110UN110pa110UN160pa160IF160160IN160160IF110plus110IF160plus160IN160plus160UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160IN110110IPP110eco110IPP110ecoplus110HPP110eco110IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160Scope of delivery1 levelling base frame, height 500 mm

Manufacturer's RRP: €350.88
Memmert stainless steel perforated tray B68508 for sizes 110 and 160
Manufacturer number: B68508

This stainless steel perforated tray (B68508) is designed for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 110 and 160. According to Memmert, a maximum of 20 kg is permitted per shelf. If you want to load several shelves, also check the maximum load per unit in the data sheet. The table of compatible models shows which series are available in which sizes.Suitable forModelSizeIF110bw110IF110110IN110plus110UF110110UN110pa110UN160pa160IF160160IN160160IF110plus110IF160plus160IN160plus160UF110plus110UN110110UN110plus110UF160160UF160plus160UN160160UN160plus160IN110110IPP110eco110IPP110ecoplus110HPP110eco110ICH110110ICP110110IN110m110IN110mplus110IF110m110IF110mplus110IN160m160IN160mplus160IF160m160IF160mplus160UN110m110UN110mplus110UF110m110UF110mplus110UN160m160UN160mplus160UF160m160UF160mplus160UF160TS160Scope of delivery1 stainless steel perforated tray

Manufacturer's RRP: €163.40