Bandelin
Bandelin SONOREX SUPER RK 31 Ultrasonic Bath, 0.9 L, 35 kHz, 329
Sensor tips, small cannulas, jewellery or individual cuvettes do not require a large bath for ultrasonic cleaning; rather, they need a bath that delivers uniform cavitation to every corner of the tank. With a total capacity of 0.9 l, the Bandelin SONOREX SUPER RK 31 is the smallest model in the SUPER RK series and is designed specifically for these small-item cleaning tasks in laboratories, medical practices and workshops.Small tank, noticeable cavitationAt an operating frequency of 35 kHz, the RK 31 generates a peak ultrasonic power of 160 watts at a nominal ultrasonic power of 40 watts, distributed across a single vibration system. This is sufficient for the small tank volume of 0.9 l (working capacity 0.6 l); larger SUPER RK models, such as the RK 514 BH, on the other hand, operate with four vibration systems covering a significantly larger area. The automatic SweepTec function continuously adjusts the frequency slightly, thereby preventing standing waves in the ultrasonic field; as a result, the cleaning effect remains uniform even in small volumes.Thin stainless steel tank for the laboratory benchThe oscillating tank is made of 1.4301 stainless steel with a thickness of 0.8 millimetres; the housing is made from the same material. The internal dimensions of 190 x 85 x 60 mm and the compact external dimensions of 205 x 100 x 180 mm ensure that the unit, with a net weight of 2.2 kg, can still be accommodated even on already occupied work surfaces. The RK 31 is operated via a robust rotary handle; the timer ranges from 1 to 15 minutes (tolerance ± 5 %), and continuous operation is also available.No drain, no heating, but simpleThe data sheet explicitly states that this model has no drain; a ball valve is not provided for this size. With a capacity of 0.9 l, the tank can be emptied directly over the edge after the cleaning cycle; an additional connection would be rather cumbersome in this case. Similarly, the RK 31 does not feature a heating element. Anyone requiring heating for cleaning in the same size should choose the RK 31 H with a fixed 65 °C; the next larger model with adjustable heating is the RK 100 H.Selection guide for the SUPER RK seriesThe SUPER RK series from Bandelin covers a wide range: from the RK 31 with a 0.9-litre capacity to the RK 1050 with a total capacity of 58 l. If you are only cleaning individual small parts, sensor tips or cuvettes, you are properly equipped with the RK 31. If the batch size increases to include several instruments or small glass vessels, it is worth considering the RK 100 H (3.0 l, heated) or the RK 103 H (4.0 l, heated and with a drain). For entire sieves or beakers, the larger models from the RK 510 (9.7 l) upwards are the more suitable choice.SUPER RK, DIGITEC DT and smart ST comparedIn addition to the SUPER RK series with classic rotary knob control, Bandelin offers the DIGITEC DT series with push-button control, an LED display and DEGAS degassing, as well as the smart ST series with a touchscreen, finely adjustable power control and programme memory. Those who only clean occasionally and value straightforward, robust operation would be well advised to choose a SUPER RK model such as the RK 31. We also offer Elma Elmasonic ultrasonic baths, an alternative for laboratories already equipped with this brand.Use and maintenanceThe working capacity of 0.6 l is deliberately set below the total capacity of 0.9 l, as space must be left for the items being cleaned when filling the bath; otherwise, the liquid will spill over the rim. As for the cleaning solution itself, Bandelin offers its own TICKOPUR range of concentrates; for the SONOREX PR series of pipette cleaners, this is included in the set, whilst a suitable concentrate for the RK 31 must be purchased separately. Freshly prepared cleaning fluid contains dissolved air, which initially dampens cavitation; a short pre-run in continuous operation before the actual cleaning process dispels it. The stainless steel tank is compatible with most aqueous cleaning agents; however, abrasive sponges or chlorine-based agents should still be avoided. At the end of the working day, it is best to empty and dry the tank.Typical applicationsCleaning of small sensor tips, cannulas and needlesPrecision cleaning of jewellery and small metal partsPre-cleaning of precision mechanical components and watch movementsCleaning individual cuvettes or small sample vessels in the laboratoryFrequently asked questionsIs the SONOREX SUPER RK 31 heated?No, the RK 31 is unheated. The heated version with the same volume is the RK 31 H (fixed at 65 °C); the next larger model with adjustable heating is the RK 100 H.Does the unit have a drain?No, the technical data sheet does not specify a ball valve for the RK 31; with a capacity of 0.9 l, the bath is emptied directly.Is the RK 31 a medical device?Yes, it is classified as a Class I medical device according to Regulation (EU) 2017/745 and is also CE-compliant with the Low Voltage, EMC and RoHS Directives.Are the basket and lid included in the scope of delivery?No, the K 08 insert basket and the D 08 lid are available separately as accessories.Technical detailsTotal capacity / Working capacity0.9 l / 0.6 lInternal dimensions of tank (L x W x D)190 x 85 x 60 mmExternal dimensions (L x W x H)205 x 100 x 180 mmWeight (net)2.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak ultrasonic power 160 W, nominal ultrasonic power 40 W, 1 vibration systemTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drain/ball valveMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 0.2 A / 115 V 0.4 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions320 x 235 x 205 mmScope of delivery1x Bandelin SONOREX SUPER RK 31 ultrasonic bathFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 08 insert basket, the D 08 lid or a larger SUPER RK model, there is an individual procurement requirement. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX SUPER RK 156 BH ultrasonic bath with heating, 9 L, 35 kHz, 646
Long pipettes, tubing, tools or torches rarely fit into a square tank. The Bandelin SONOREX SUPER RK 156 BH, with internal dimensions of 500 x 140 x 150 mm, is deliberately designed to be narrow and long, thus providing a total capacity of 9.0 l for elongated items that cannot be accommodated in the more compact SUPER RK models.Narrow tank for elongated objectsWhilst most SUPER RK models have approximately square tanks, the RK 156 BH, measuring 500 mm in length and just 140 mm in width, is tailored to slender items: shorter laboratory glass rods, tools, hoses or several smaller instruments placed side by side. The working capacity is 6.0 l, and four vibration systems ensure uniform ultrasonic agitation across the entire length of the tank.600-watt heater for thorough cleaningAt an operating frequency of 35 kHz, the RK 156 BH delivers 860 watts of peak power and 215 watts of rated power; the SweepTec function prevents standing waves across the elongated tank shape. The 600-watt heater covers a range of 30 to 80 °C and is fitted with dry-run protection; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation, controlled via rotary knobs for time and temperature.Ball valve drain and robust constructionA G 1/4 ball valve on the right-hand side allows the tank to be drained in a controlled manner. The tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the external dimensions of 530 x 165 x 300 mm and the net weight of 7.3 kg correspond to the narrow, elongated design. The housing is IP 32-rated, and the 2-metre power cable is permanently attached to the unit.When the BH design is suitableFor compact, roughly cube-shaped items to be cleaned, the standard SUPER RK models, such as the RK 510 H (9.7 l, but with a more square tank), are often the more practical choice. The RK 156 BH is worth considering where the length of the items to be cleaned is the main issue, such as with rods, longer tools or multiple objects that need to be placed side by side rather than on top of one another.Product range breakdown: SUPER RK, DIGITEC DT and smart STThe slim BH design is currently only available within the SUPER RK series with classic rotary knob controls. Those looking instead for digital button controls with an LED display will find them in the DIGITEC DT series, whilst the smart ST series features touchscreen controls with programme memory. We also offer Elma Elmasonic ultrasonic baths, although these are built with different tank shapes.Use and maintenanceThe working capacity of 6.0 l is less than the total capacity of 9.0 l, ensuring that no water spills over the rim when the items to be cleaned are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable as the cleaning agent. Freshly prepared liquid should be run briefly in continuous operation before the first cleaning cycle, so that dissolved air escapes and cavitation can take full effect. After use, the tank can be drained completely via the ball valve, leaving no residue, and then wiped dry.Typical applicationsCleaning of elongated tools, rods and hosesSimultaneous cleaning of several smaller instruments side by sidePre-cleaning of narrow laboratory glassware prior to further processingDegreasing of elongated metal parts in workshops and industryFrequently asked questionsWhy is the tank so narrow and long?The internal dimensions of 500 x 140 x 150 mm are specifically designed for elongated items that do not fit into more square-shaped tanks.Where is the drain?On the right, as a ball valve with a G 1/4 connection.Is the RK 156 BH heated?Yes, with a heating power of 600 watts and a temperature range of 30 to 80 °C.How many vibration systems does the unit have?Four, distributed along the entire length of the tank to ensure uniform agitation.Technical detailsTotal capacity / Working capacity9.0 l / 6.0 lInternal tank dimensions (L x W x D)500 x 140 x 150 mmExternal dimensions (L x W x H)530 x 165 x 300 mmWeight (net)7.3 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating power600 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions655 x 265 x 370 mmScope of delivery1x Bandelin SONOREX SUPER RK 156 BH ultrasonic bath with heaterFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 6 BL insert basket, the D 156 lid or another tank shape from the SUPER RK series, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX SUPER RK 100 H ultrasonic bath with heating, 3 litres, 312
Where instruments or small parts also need to be cleaned of grease and residues using heat, a cold ultrasonic bath is often not sufficient. The Bandelin SONOREX SUPER RK 100 H features its own heating system within its compact 3.0-litre capacity, making it the smallest heated model in the SUPER RK series.Heating from 30 to 80 °CThe 140-watt heater covers a temperature range of 30 to 80 °C and is fitted with dry-run protection, which switches the heater off as soon as there is insufficient liquid in the tank. Combined with an operating frequency of 35 kHz, a peak power of 320 watts and a nominal power of 80 watts, it can remove dirt that would otherwise require more time or a more aggressive cleaning agent at room temperature.One vibration system for 2.0 litres of working capacityThe total capacity of 3.0 litres (working capacity 2.0 litres) is subjected to ultrasonic treatment via a single vibration system, whilst the SweepTec function prevents standing waves in the tank. The tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick. The unit is operated via a rotary knob; the cleaning duration and bath temperature can be set independently of one another, whilst the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Compact and without a drain connectionAs with the smaller RK 31, the data sheet for the RK 100 H makes no mention of a ball valve; ‘drain: -’ is explicitly stated in the technical specifications. With a capacity of 3.0 litres, the tank can still be easily emptied after cleaning. With external dimensions of 260 x 160 x 250 mm and a net weight of 3.5 kg, the appliance fits easily even on smaller worktops.Decision guide: when is it worth opting for the next size up?The RK 100 H is usually sufficient for individual instruments, spectacles or small tools. If you regularly need to clean several items at once or slightly larger objects, the RK 103 H (4.0 litres), which is slightly larger and fitted with a drain, offers a practical advantage when changing the cleaning solution. For beakers or small sieves, the RK 510 H, with a capacity of 9.7 litres, is the next step up within the SUPER RK series.SUPER RK or smart ST: two ways to achieve the same volumeBandelin also offers the same 3.0-litre tank size in its digital smart ST range, which features a touchscreen, fine-tuned power control and programme memory instead of a rotary knob. Those wishing to save cleaning cycles in a reproducible manner are better off with the smart ST 102 H, whilst those who prefer simple, robust operation without electronics should stick with the RK 100 H. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and MaintenanceThe 2.0-litre capacity provides space for the items to be cleaned; if filled to the brim, the tank will overflow when the items are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid and is available separately via the procurement service. As the RK 100 H does not have an automatic degassing function, a short initial run in continuous operation helps to expel dissolved air from freshly prepared liquid before the items to be cleaned are loaded. After the last cycle of the day, the tank should be emptied and wiped down to prevent any cleaning agent residues from settling.Typical applicationsHeat-assisted cleaning of small instruments in practices and laboratoriesDegreasing small metal and plastic partsCleaning spectacles, watches and jewelleryPreliminary cleaning of laboratory glassware prior to further processingFrequently Asked QuestionsWhat temperature does the RK 100 H reach?The heater operates at temperatures ranging from 30 to 80 °C, controlled via the rotary knob.Is there a drain for emptying?No, according to the data sheet, this model does not have a ball valve; the tank is simply tipped out.What is the difference between the RK 100 H and the RK 31?Both are part of the small SUPER RK range; the RK 100 H also has a 140-watt heating element and a slightly larger capacity (3.0 litres instead of 0.9 litres).Is a basket included in the scope of delivery?No, the K 3 C insert basket, the PK 2 C plastic basket and the D 100 lid are available separately.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mmWeight (net)3.5 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 320 W, nominal power 80 W, 1 vibration systemHeating power140 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmCasing materialStainless steel 1.4301Drainno drain/ball valveMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.0 A / 115 V 2.0 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX SUPER RK 100 H ultrasonic bath with heatingFixed power cable (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceThere is a specific procurement requirement for the K 3 C insert basket, the PK 2 C plastic basket, the D 100 lid or a model with a drain such as the RK 103 H. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX SUPER RK 1040 ultrasonic bath, 1.4301 tank, 39.5 litres, 35 kHz, 319
Within the SUPER-RK series, the Bandelin SONOREX SUPER RK 1040 stands out due to its shape: instead of a rectangular tank, it has a round tank with a diameter of 500 mm. With a total capacity of 39.5 litres and a working capacity of 28 litres, this ultrasonic bath is suitable for larger batches of laboratory glassware, tools or components. Like the other models in the series, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745.Round tank for large batches without heatingThe RK 1040 operates without heating and is therefore suitable for applications where pure ultrasonic energy is sufficient or where heat would adversely affect the items being cleaned or the cleaning medium. At 35 kHz, the unit generates a peak power of 1,520 watts and a nominal power of 380 watts via eight vibration systems. The tank is made of 1.4301 stainless steel with a thickness of 2.5 mm, which is greater than the 1.0 mm thickness of the smaller RK 1028 H, reflecting the larger tank surface area and higher filling volume. The automatic SweepTec function distributes the sound field evenly and prevents standing waves in the tank.Selection guide and dispatch for large batchesWith a working capacity of 28 litres, the RK 1040 sits between the RK 1028 series, which ranges from 19 to 30 litres, and the largest model, the RK 1050, with 41 litres. Anyone requiring a more robust tank made from 1.4404 instead of the standard 1.4301 tank will find this in the RK 1028 C or the RK 1050. Due to its weight and dimensions, the RK 1040 is dispatched on a Euro pallet; the net weight is 19.9 kg, whilst the shipping weight, including the carton and pallet, is 45.0 kg. This must be taken into account when planning delivery, for example if no forklift or pallet truck is available on site.Typical applicationsCleaning large batches of laboratory glassware, tools and componentsDegassing of solvents and aqueous media prior to analytical proceduresWorkshop and industrial applications without temperature requirementsCleaning tasks where a round tank promotes more uniform sound distributionPosition within the SUPER-RK seriesBandelin’s SUPER-RK series covers volumes ranging from less than one litre for the RK 31 up to 58 litres for the RK 1050, with or without heating, and with either a standard or a 1.4404 tank. For digital displays and push-button operation instead of a rotary knob, Bandelin offers the SONOREX DIGITEC range, although so far only in smaller sizes up to 13 litres. In addition to Bandelin, we also offer ultrasonic baths from Elma; their Elmasonic P series operates with switchable dual-frequency technology, offering an alternative for laboratories that do not wish to clean continuously at 35 kHz.Use and maintenanceThe tank is filled to a working capacity of 28 litres; the total volume of 39.5 litres refers to the tank filled to the brim without any items to be cleaned. The ball valve on the drain, specified in the data sheet as G 1/2 inch on the right-hand side of the unit, is used for draining. The K 40 insert basket and D 40 lid are available as accessories and are not included in the scope of delivery. The power cable is 2 metres long and permanently fitted; the unit operates on either 230 V or 115 V at 50/60 Hz, and the housing has an IP 32 protection rating.Frequently Asked QuestionsWhy is the tank of the RK 1040 round?Bandelin does not give an explicit reason for this in the data sheet; the round shape distinguishes this model from the other rectangular SUPER-RK sizes.How is the unit supplied?Due to its gross weight of 45.0 kg, the RK 1040 is dispatched as a carton on a Euro pallet.Is there a heated version of the RK 1040?No, according to the Bandelin range, there is no ‘H’ model with heating available for this size.Is the RK 1040 classified as a medical device?Yes, Bandelin classifies it as a Class I medical device in accordance with Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity39.5 l / 28.0 lInternal dimensions of tank (Ø x D, round)Ø 500 x 195 mmExternal dimensions (Ø x H, round)Ø 540 x 500 mm, excluding handles/ball valve, with feetWeight (net)19.9 kgShipping weight (gross)45.0 kg, carton on Euro palletUltrasonic frequency35 kHzUltrasonic powerPeak power 1,520 W, nominal power 380 W, 8 vibration systemsHeatingNot applicable, unheated modelTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 2.5 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, right-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.7 A / 115 V 3.4 AProtection ratingIP 32PackagingCarton on a Euro pallet, 1200 x 800 x 600 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1040 ultrasonic bathPermanently attached mains cable (2 m)Instructions for useThe K 40 insert basket and D 40 lid are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding the right insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1040.
Bandelin SONOREX SUPER RK 103 H ultrasonic bath with heating, 4 litres, 326
One size larger than the RK 100 H, but with the same simple operating concept: The Bandelin SONOREX SUPER RK 103 H has a total capacity of 4.0 litres and a working capacity of 2.7 litres for cleaning tasks where a little more space is needed for instruments or small parts, without having to switch to a significantly larger bath.Greater performance thanks to two vibration systemsInstead of a single vibration system, as in the RK 100 H, the RK 103 H features two vibration systems operating in parallel, delivering a combined peak power of 560 watts at a nominal power of 140 watts, whilst maintaining a constant operating frequency of 35 kHz. The SweepTec function ensures that this power is distributed evenly across the slightly larger tank surface without standing waves forming.200-watt heater up to 80 °CAs with the other H models in the series, the integrated heater covers a range from 30 to 80 °C, with 200 watts of heating power and dry-run protection. Cleaning duration and temperature are set separately via two rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Ball valve drain as a practical difference from the RK 100 HUnlike the RK 100 H, the RK 103 H features a drain: a G 1/4 ball valve on the right-hand side allows for controlled emptying without having to lift or tilt the tank. Given the frequent changes of medium in everyday laboratory work, this is a noticeable advantage over its smaller counterpart. The tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the external dimensions are 260 x 160 x 310 mm with a net weight of 4.6 kg.Guide to choosing between the RK 100 H and RK 103 HAnyone who regularly changes the cleaning medium or requires a working volume of more than 2.0 litres is better off with the RK 103 H (2.7-litre working volume, with drain) than with the smaller RK 100 H without a drain. If even more space is required, for example, to accommodate several beakers at the same time, the RK 510 H, with a total capacity of 9.7 litres, is the next model up in the SUPER RK series.Product range at a glance: SUPER RK, DIGITEC DT and smart STBandelin also offers the same performance class in the DIGITEC DT series, featuring push-button operation, an LED display and automatic DEGAS degassing, as well as in the smart ST series with a touchscreen and programme memory. The RK 103 H is designed for anyone who prefers simple, mechanical operation without a display. In addition, we also offer Elma Elmasonic ultrasonic baths for laboratories that already rely on this brand.Use and maintenanceThe 2.7-litre working capacity leaves room for the items to be cleaned when filling the bath; the bath should not be filled to the brim. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid. Before the first cleaning cycle with a freshly prepared solution, a short initial run in continuous operation helps to expel any trapped air and achieve the full cavitation effect. After the last use of the day, the tank should be drained via the ball valve and wiped dry to prevent any residues from settling.Typical applicationsCleaning of tweezers, scissors and smaller practice instrumentsDegreasing and cleaning of small metal and plastic partsCleaning of cuvettes, filter holders and sample holdersHeat-assisted pre-cleaning prior to further processingFrequently asked questionsWhat is the difference between the RK 103 H and the RK 100 H?The RK 103 H has a larger capacity (4.0 litres instead of 3.0 litres), two vibration systems instead of one, and a ball valve drain, which the RK 100 H does not have.What temperature range is available?30 to 80 °C, controlled via a separate rotary knob.On which side is the drain?On the right, fitted as a ball valve with a G 1/4 connection.Is the unit equally suitable for use in medical practices and laboratories?Yes, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and is CE-compliant with the Low Voltage, EMC and RoHS Directives.Technical detailsTotal capacity / Working capacity4.0 l / 2.7 lInternal dimensions of the tank (L x W x D)240 x 140 x 150 mmExternal dimensions (L x W x H)260 x 160 x 310 mmWeight (net)4.6 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 560 W, nominal power 140 W, 2 vibration systemsHeating power200 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.5 A / 115 V 3.0 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 380 mmScope of delivery1x Bandelin SONOREX SUPER RK 103 H ultrasonic bath with heatingFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 3 CL insert basket, the D 100 lid or another model from the SUPER RK series, there is an individual procurement need. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX DIGITEC DT 510 H ultrasonic bath with heating, 9.7 L, 20 to 80 °C, 3206
The Bandelin SONOREX DIGITEC DT 510 H combines a 9.7-litre tank with a 400-watt heater, which can be set to temperatures between 20 and 80 °C. The inner dimensions of the bath are 300 x 240 x 150 mm; it is operated via buttons, and the display shows the setpoint and actual bath temperature.Temperature control with boiling delay protectionThe heater includes boiling delay protection and dry-run protection. The automatic safety shut-off activates twelve hours after the last button press. At 230 V, the heater’s current consumption of 2.5 A is significantly higher than that of the unheated DT 510, which is 0.7 A.Ultrasound with four vibration systemsFour vibration systems deliver a peak power of 640 watts at 35 kHz; the rated power is 160 watts. SweepTec operates fully automatically to counter standing waves in the ultrasonic field; there is also a pulse function and the DEGAS rapid degassing feature, which is activated at the start of the cleaning process. The timer runs in the following increments: 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) or in continuous operation.Tank, drain and weightThe tank (1.0 mm) and housing are made of 1.4301 stainless steel. Of the 9.7-litre total capacity, 6.6 l are used as working volume; a fill level mark is provided. The G 1/2 ball valve on the left-hand side is used for draining; a hose nozzle and hose for fitting to the drain are included. The unit measures 325 x 265 x 300 mm, weighs 7.4 kg and has side handles.Larger tank with heatingIf you need more capacity and heating up to 80 °C, the DT 514 H is the model for you, with a total capacity of 13.5 l, 600 watts of heating power and 860 watts of peak ultrasonic power. The DT 510 H, with a 9.7-litre capacity, is the smaller of the two baths and has a footprint of 325 x 265 mm.AccessoriesFor the DT 510 H, Bandelin supplies the K 10 insert basket (up to 10 kg), the GH 10 instrument holder, the D 510 lid, the DE 510 perforated lid for four insert cups, the ED 9 injection nozzle holder, the ZF 10 laboratory flask holder and the KW 10-0 polypropylene hanging tray. 0.6-litre insert cups are available in glass, plastic and stainless steel. Clamps EK 10 to EK 250 hold laboratory flasks with diameters up to 85 mm.Typical applicationsCleaning of items of various shapes, types and sizes in laboratories, medical practices and workshops at an adjustable bath temperatureRapid degassing of liquidsHomogenisation and emulsificationSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments classified as Class I medical devices; the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat temperatures can be set?20 to 80 °C at 400 watts of heating power.Where is the drain?On the left, as a G 1/2 ball valve.How does the DT 510 H differ from the DT 510?Both have the same tank and the same ultrasonic power. The DT 510 H also features a heating element and boiling delay protection.What is the unit’s current consumption?2.5 A at 230 V and 4.9 A at 115 V. The 3206 model is available with a CEE 7/7 EU plug for 230 V; Bandelin offers UK, Swiss and US variants under separate order numbers.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mm (excluding handles and ball valve, including feet)Weight (net / gross)7.4 kg / 9.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating400 W, adjustable temperature range 20 to 80 °C, boiling delay protection, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, boiling delay protection, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 510 H ultrasonic bath with heaterMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert cups, and they are available separately.Individual requirements and procurement serviceFor accessories such as the K 10 basket, the D 510 lid or another heated model, individual procurement requirements apply. You can request a quote without obligation via our procurement service.
Bandelin SONOREX DIGITEC DT 100 H Ultrasonic Bath with Heating, 3 L, 35 kHz, 3230
Small components, tweezers or small laboratory parts often do not require a large tank volume, but rather a reliable temperature and simple digital control. The Bandelin SONOREX DIGITEC DT 100 H offers exactly that in a compact design: a total volume of 3.0 l, a working capacity of 2.0 l, and push-button operation with an LED display showing the remaining time and bath temperature. For a laboratory workstation or a workbench in a workshop, external dimensions of 260 x 160 x 250 millimetres (L x W x H, excluding handles) are sufficient.Compact volume for small batchesWith a total volume of 3.0 l and a working capacity of 2.0 l, the DT 100 H is designed for smaller cleaning volumes; a vibration system delivers 80 watts of nominal power and 320 watts of peak power. This is sufficient for individual tools, small metal or plastic parts, and laboratory accessories that do not accumulate in large batches. The internal dimensions of the tank are 240 x 140 x 100 millimetres.Buttons instead of a rotary knob, a display instead of a scaleButtons are used for operation instead of a rotary knob, whilst an LED display shows the remaining time as well as the setpoint and actual bath temperature simultaneously. The time can be selected in fixed increments from 1 to 30 minutes or set to continuous operation, in each case with a tolerance of ±5 %. The appliance switches off automatically after 12 hours without any buttons being pressed.Heating up to 80 °CThe 140-watt heating power covers a temperature range of 20 to 80 °C; a dry-run protection feature prevents damage should the tank accidentally run without liquid. Additionally, the unit features SweepTec for even sound distribution, DEGAS for rapid degassing, and a pulse function for varying cleaning intensity.DT 100 H or DT 512 H: which model is suitableFor small quantities such as tweezers, spectacles, jewellery or individual laboratory items, the DT 100 H with a 3.0-litre capacity is a suitable choice. If you regularly process larger batches, such as several laboratory bottles or bulkier items, the DT 512 H, with a total volume of 13.0 l and significantly higher performance, is the more suitable addition to the range.Difference from the SUPER RK 100 H and smart ST 102 HThe SUPER RK 100 H, which is of identical construction, has the same tank size but is operated via a traditional rotary knob, without a digital display or the DEGAS function. The smart ST 102 H offers more advanced technical features: a touchscreen, power adjustment from 10 to 100 % in 1 % increments, a freely selectable timer up to 8 hours and 12 programme memory slots. The DIGITEC DT 100 H falls somewhere in between and offers digital time and temperature control with a reasonable level of operational complexity.Operation without a drain tapThe DT 100 H has no drain or ball valve; the data sheet explicitly states ‘drain: -’ here. To change the cleaning fluid, the tank is emptied directly or drained using a suction device. The K 3 C insert basket or the PK 2 C plastic basket, as well as the D 100 lid, both available separately, are compatible with the unit. The power cable is permanently fitted and measures 2 metres; the unit can be connected to either 230 V or 115 V at 50/60 Hz.Typical applicationsCleaning of small tools, tweezers and laboratory accessoriesProcessing of small metal or plastic parts in the workshopPre-cleaning of individual components prior to assembly or further processingCleaning tasks in confined spaces in the laboratory or at the workbenchFrequently asked questionsDoes the DT 100 H have a drain tap?No, according to the data sheet there is no drain; the tank is emptied directly.Is the unit a medical device?Yes, Class I in accordance with Regulation (EU) 2017/745.Which accessories are compatible with the DT 100 H?The K 3 C insert basket or the PK 2 C plastic basket, as well as the D 100 lid; neither of these is included in the scope of delivery.How does the DT 100 H differ from the heated SUPER RK 100 H?Both models have the same tank size, but the SUPER RK 100 H is operated via a rotary knob, whilst the DT 100 H is operated via buttons with an LED display and an additional DEGAS function.How long does the appliance run without any input before it switches off?After 12 hours without any buttons being pressed, the automatic safety shut-off switches the appliance off.Technical detailsTotal volume3.0 lWorking capacity2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mm (excluding handles/ball valve, including feet)Weightnet 3.5 kg / gross 4.4 kgTank materialStainless steel 1.4301, 1.0 mmUltrasonic frequency35 kHzUltrasonic power80 W nominal power, 320 W peak power, 1 vibration systemHeating power140 WTemperature range20 to 80 °CTimer1/2/3/4/5/10/15/30 minutes (±5 %) or continuous operation, automatic safety shut-off after 12 hoursOperationButtons, LED display showing remaining time and setpoint/actual bath temperatureFunctionsSweepTec, DEGAS rapid degassing, pulse function, dry-run protection for the heaterDrainNo drain/ball valve (data sheet: drain: -)Mains connection230 V AC (±10 %), 50/60 Hz, optionally 115 V AC, 2 m fixed power cable, Protection Class ICurrent consumption230 V 1.0 A / 115 V 2.0 AProtection ratingIP 33ClassificationClass I medical device (EU 2017/745)Scope of delivery1x Bandelin SONOREX DIGITEC DT 100 H ultrasonic bathFixed mains lead (2 m)Instructions for useThe K 3 C insert basket or PK 2 C plastic basket and D 100 lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor a suitable insert basket, lid or a larger DIGITEC model, please contact our procurement service.
Bandelin SONOREX SUPER RK 514 BH ultrasonic bath with heating, 18.7 litres, 35 kHz, 263
When several beakers, sieves or larger sets of instruments need to be cleaned at the same time, 9 or 10 litres quickly proves to be insufficient. The Bandelin SONOREX SUPER RK 514 BH has a total capacity of 18.7 litres and a working capacity of 12.5 litres, a noticeably greater capacity, whilst remaining part of the SUPER RK series operated by a rotary handle.Four oscillation systems for larger batchesAt an operating frequency of 35 kHz, 860 watts of peak power and 215 watts of rated power are distributed across four oscillation systems; the SweepTec function ensures that, even with this larger tank volume, no standing waves are generated and cavitation acts uniformly, regardless of whether there are several smaller objects or a single large beaker in the bath.600-watt heater for demanding cleaning tasksThe heater covers a range of 30 to 80 °C, with dry-run protection to prevent damage if the liquid level is too low. Cleaning duration and temperature can be adjusted independently using two rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation for longer cleaning cycles.Larger tank than the smaller SUPER RK modelsThe tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the internal dimensions of 325 x 300 x 200 mm offer significantly more space than the smaller SUPER RK models. With external dimensions of 355 x 325 x 385 mm and a net weight of 9.8 kg, the unit remains portable. A G 1/2 ball valve on the left-hand side allows the larger volume of water to be drained without tilting the unit.Selection guide: when the RK 514 BH is suitableIf the capacity of the RK 510 H (9.7 litres) is no longer sufficient because several beakers or a larger set of instruments need to be cleaned simultaneously on a regular basis, the RK 514 BH, with a capacity of 18.7 litres, is the next logical step within the SUPER RK series. If even more capacity is required, for example, for entire sieves or larger batches, models such as the RK 1028 H, with a capacity of 28 litres, are available.Product range overview: SUPER RK, DIGITEC DT and smart STEven with larger volumes, the SUPER RK series retains its simple rotary-knob operation. For digital button operation with an LED display and automatic DEGAS degassing in a similar size class, the DIGITEC DT 512 H with a 13-litre capacity is available; for touchscreen operation with programme memory, the smart ST series is available. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and maintenanceThe working capacity of 12.5 litres is significantly less than the total capacity of 18.7 litres, allowing several beakers to be placed inside at the same time without the liquid spilling over the rim. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning fluid; with this volume, a more generous refill quantity is recommended. Before the first cycle with freshly prepared medium, a short run-in period in continuous operation helps to remove trapped air. After the final cleaning cycle of the day, the tank can be quickly emptied via the ball valve.Typical applicationsCleaning several beakers or larger laboratory glassware items simultaneouslyCleaning of sieve inserts and larger sets of instrumentsHeat-assisted batch cleaning in workshops and industryDegassing of larger volumes of aqueous solutions prior to analysisFrequently asked questionsHow much does the tank actually hold?The working capacity is 12.5 litres, and the total capacity is 18.7 litres.What temperature range is possible?30 to 80 °C, with dry-run protection for the heater.Where is the drain?On the left, as a ball valve with a G 1/2 connection.Is a basket included?No, the K 14 B or, alternatively, the K 14 AZ hanging basket, as well as the D 514 lid, are available separately.Technical detailsTotal capacity / Working capacity18.7 l / 12.5 lInternal dimensions of the tank (L x W x D)325 x 300 x 200 mmExternal dimensions (L x W x H)355 x 325 x 385 mmWeight (net)9.8 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating power600 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ComplianceLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 465 mmScope of delivery1x Bandelin SONOREX SUPER RK 514 BH ultrasonic bath with heaterFixed mains lead (2 m)Operating instructionsThe hanging basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 14 B hanging basket, the alternative K 14 AZ basket, the D 514 lid or a larger model such as the RK 1028 H, there is an individual procurement need. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX DIGIPLUS DL 514 BH ultrasonic bath with heating, 18.7 l, 7185
The Bandelin SONOREX DIGIPLUS DL 514 BH has been discontinued by the manufacturer and is no longer available. Its successor is the Bandelin SONOREX smart ST 514 BH, which has the same tank size and a finer power setting. Existing accessories for the 514 series, such as lids and insert baskets, will continue to fit the successor model without modification.Powerful cleaning with digital precision The Bandelin SONOREX DIGIPLUS DL 514 BH is a professional-grade digital ultrasonic bath, specially developed for demanding tasks in laboratories and industry. With a tank volume of 18.7 litres, it offers sufficient space for larger items to be cleaned. A key feature of this model is the power setting from 20 % to 100 % in 10 % increments. This allows you to precisely adjust the intensity of the ultrasound to suit the sensitivity of the items being cleaned, from gentle treatment to the powerful removal of stubborn dirt. Efficient heating and robust construction For optimum cleaning results, the unit features an integrated 600-watt heating element that electronically controls the temperature range from 20 °C to 80 °C. The ultrasonic tank is made of high-quality 1.4301 (V2A) stainless steel with a wall thickness of 1.0 mm, making it particularly resistant to cavitation erosion and mechanical stress. The housing is protected against spraying water (IP 33) and is also made of stainless steel, supporting easy cleaning and durability in daily use. Convenient operation and process reliability Control is via an intuitive membrane keypad. The digital timer allows selection of fixed time intervals (1, 2, 3, 4, 5, 10, 15, 30 min) or continuous operation for longer processes. Thanks to the high ultrasonic peak power of 860 W (at a frequency of 35 kHz), cavitation bubbles are effectively generated to clean thoroughly even in hard-to-reach cavities. After use, the liquid can be conveniently drained via the side-mounted ball valve (G ½). Technical details Tank capacity: 18.7 litres Working capacity: 12.5 litres Internal dimensions (L x W x D): 325 x 300 x 200 mm Nominal ultrasonic power: 215 W Ultrasonic peak power: 860 W Power setting: 20-100 % (adjustable) Heating power: 600 W (20-80 °C) Frequency: 35 kHz Timer: Intervals (1-30 mins) & continuous operation (∞) Drain: G ½ ball valve (left-hand side) Tank/housing material: Stainless steel 1.4301 Degree of protection: IP 33 External dimensions (L x W x H): 355 x 325 x 385 mm Scope of delivery Bandelin SONOREX DIGIPLUS DL 514 BH G ½ ball valve (fitted) Mains lead (2 m, permanently attached to the unit) Operating instructions IMPORTANT: The basket (K 14 B) and lid (D 514) are NOT included in the scope of delivery and must be ordered separately. Individual requirements and procurement service Do you need the suitable K 14 B insert basket, the D 514 lid or specialised cleaning chemicals (TICKOPUR)? We can configure your complete cleaning setup. Please contact our procurement service for suitable accessories.
Bandelin SONOREX SUPER RK 1028 C ultrasonic bath, 1.4404 tank, 45 litres, 35 kHz, 661
Not every cleaning task requires heat; indeed, some cleaning agents and materials do not tolerate it well. The Bandelin SONOREX SUPER RK 1028 C operates without heating and instead features a welded tank made from high-alloy stainless steel 1.4404 (AISI 316L). With a total capacity of 45 litres and a working capacity of 30 litres, this ultrasonic bath is one of the larger models in the SUPER-RK series and, like all units in the range, is classified as a Class I medical device in accordance with Regulation (EU) 2017/745.Robust tank for continuous operation without heatingThe 1.4404 grade is molybdenum-alloyed and is therefore generally more resistant to chlorides and more aggressive cleaning agents than the standard 1.4301 grade, from which the other unheated SUPER-RK models, such as the RK 1040, are manufactured. The tank is welded rather than drawn and has a thickness of 2.0 mm, twice that of the standard RK 1028 H model. On the ultrasonic side, the RK 1028 C delivers a peak power of 2,000 watts and a nominal power of 500 watts at 35 kHz, distributed across ten vibration systems. The SweepTec function operates fully automatically to counter standing waves in the acoustic field, whilst an additional pulse function briefly increases the energy output to tackle more stubborn dirt.Typical applicationsCleaning of larger batches of laboratory glassware, tools and componentsPreparation and degassing of cleaning media prior to analytical processesUse with cleaning concentrates that are more aggressive towards standard stainless steelWorkshop and industrial applications with high throughput and no temperature requirementsThe 1028 series and alternatives in the rangeIf you additionally need heating, the RK 1028 CH with an identical tank offers the heated version with the same tank material. If the standard 1.4301 tank is sufficient, the RK 1028 H with the same volume and heating is the more cost-effective alternative. For smaller batches without heating, Bandelin also offers the RK 510 with a capacity of 9.7 litres and the RK 1040 with a round tank and a capacity of 39.5 litres. In addition to the SONOREX range, we also offer ultrasonic baths from Elma, for example with switchable dual-frequency technology, for applications where a fixed frequency of 35 kHz is insufficient.Use and maintenanceThe tank is filled to a working capacity of 30 litres; the total volume of 45 litres refers to the tank filled to the brim without the items to be cleaned. The ball valve on the drain, specified in the data sheet as G 1/2 inch on the left-hand side of the unit, is used for draining and changing the cleaning medium. The insert basket and lid are not included in the scope of delivery; for the RK 1028 C, the K 28 C or K 28 CS baskets are suitable, with the corresponding lids D 1028 C or D 1028 CS respectively. Cleaning concentrates for the SONOREX series can be purchased separately. The power cable is 2 metres long and permanently attached to the unit; operation is possible with either 230 V or 115 V.Frequently Asked QuestionsWhy does the RK 1028 C not have heating?This is the unheated basic version of the 1028 model; for heated operation with the same tank, there is the sister model RK 1028 CH.What distinguishes the 1.4404 tank from the standard tank?The tank of the RK 1028 C is welded rather than drawn, 2.0 mm thick instead of 1.0 mm, and is made from the molybdenum-alloyed stainless steel 1.4404, which is generally more resistant to chlorides than the standard material 1.4301.How much does the unit weigh when shipped?The net weight of the RK 1028 C is 24.9 kg; when packed in a carton, the weight increases to 28.0 kg.Is the device classified as a medical device?Yes, Bandelin classifies the RK 1028 C as a Class I medical device in accordance with Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of the tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm, excluding handles/ball valve, with feetWeight (net)24.9 kgShipping weight (gross)28.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 2,000 W, nominal power 500 W, 10 vibration systemsHeatingNot applicable, unheated modelTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.2 A / 115 V 4.4 ADegree of protectionIP 32Packaging dimensions670 x 470 x 565 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 C ultrasonic bathPermanently attached mains cable (2 m)Instructions for useThe insert basket (K 28 C or K 28 CS) and lid (D 1028 C or D 1028 CS) are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 C.
Bandelin SONOREX SUPER RK 1028 CH ultrasonic bath with heating, 1.4404 tank, 45 litres, 35 kHz, 143
Larger batches and a cleaning medium that places greater demands on the standard tank: Bandelin offers the SONOREX SUPER RK 1028 CH for this combination. It combines a welded tank made of 1.4404 stainless steel (AISI 316L) with a heating element that heats the bath to up to 80 °C, with a total capacity of 45 litres and a working capacity of 30 litres. Like the other models in the SUPER-RK series, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and is designed for use in laboratories, medical practices and workshops.Heater and durable bath in a single unitThe heating power is 1,450 watts when operating at 230 volts or 1,400 watts at 115 volts, and the bath temperature can be continuously adjusted between 30 and 80 °C; a dry-run protection feature switches off the heater if the water level is too low. As with the RK 1028 C, the tank is made of welded 1.4404 steel with a thickness of 2.0 mm; compared to the standard tank made of 1.4301, it is generally more resistant to chlorides and more aggressive cleaning agents. At 35 kHz, the unit delivers a peak power of 1,200 watts at a rated power of 300 watts via eight transducer systems, distributed by the automatic SweepTec function to prevent standing waves in the ultrasonic field.Selection guide: with or without heating, which tankAnyone who regularly works with heat and simultaneously requires a more robust tank, for example, for frequent changes of concentrate, will be well served by the RK 1028 CH. If the standard 1.4301 tank is sufficient but a heating element is still required, the RK 1028 H, with a total capacity of 28 litres, is the more economical choice. If heating is not required but a more robust bath is, the RK 1028 C remains the option as an unheated variant with the same bath specifications. For smaller batches, Bandelin offers, amongst others, the RK 514 BH with a capacity of 18.7 litres and the RK 156 BH with a narrow, elongated basin for 9 litres within the SUPER-RK range.Use and maintenanceThe tank is filled to a working capacity of 30 litres; the total volume of 45 litres applies to the tank filled to the brim without a load. According to the data sheet, the RK 1028 CH is fitted with a 50 cm long hose connected to the G 1/2 ball valve on the left-hand side of the unit, which facilitates changing the medium via an external container. The hanging basket and lid are not included in the Scope of delivery; the RK 1028 CH is compatible with baskets K 28 C, K 28 CS, K 28 CA or K 28 CV, together with lids D 1028 C or D 1028 CS. The power cable is 2 metres long and permanently fitted; the unit can be operated at either 230 V or 115 V at 50/60 Hz.Typical applicationsHeated cleaning of large batches of laboratory glassware and instrumentsRemoval of grease and dried-on residues at elevated temperaturesUse with more aggressive cleaning concentrates thanks to the robust tankPreparation and degassing of solvents prior to analytical proceduresFrequently asked questionsHow does the RK 1028 CH differ from the RK 1028 H?Both have a heating element. The RK 1028 CH has a total capacity of 45 litres compared with 28 litres for the RK 1028 H, and additionally features a welded 1.4404 tank with a thickness of 2.0 mm instead of the standard 1.0 mm 1.4301 tank.How quickly does the unit heat up?There is no information on this in the data sheet; the heating power is 1,450 watts at 230 V or 1,400 watts at 115 V.Is a drain hose included?Yes, the data sheet specifies a 50 cm long hose connected to the G 1/2 ball valve for the RK 1028 CH.Can I use the unit for medical instruments?Bandelin classifies the RK 1028 CH as a Class I medical device in accordance with Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm, excluding handles/ball valve, with feetWeight (net)23.4 kgShipping weight (gross)26.4 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, rated power 300 W, 8 vibration systemsHeating power1,450 W at 230 V / 1,400 W at 115 VTemperature range30 to 80 °C, dry-run protection for the heaterTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainG 1/2 ball valve with 50 cm hose, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 7.7 A / 115 V 15.0 ADegree of protectionIP 32Packaging dimensions670 x 470 x 565 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 CH ultrasonic bath with heatingPermanently attached mains cable (2 m)Instructions for useHanging basket (K 28 C, K 28 CS, K 28 CA or K 28 CV) and lid (D 1028 C or D 1028 CS) are not included in the Scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding the right hanging basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 CH.
Bandelin SONOPULS HD 4200 Ultrasonic Homogeniser, 200 W, 20 kHz, 4200
Cell disruption, homogenisation or emulsification require more energy at any one point than an ultrasonic bath can provide. The Bandelin SONOPULS HD 4200 therefore uses a sonotrode that is immersed directly into the sample rather than a bath: The generator, transducer, stepped horn and the TS 113 titanium sonotrode form a ready-to-use set for sample volumes of 20 to 900 millilitres.Amplitude control with AMPLICHRON circuitryThe amplitude can be adjusted in 1 % increments from 10 to 100 %; the current value is displayed continuously during operation. The AMPLICHRON circuit maintains a constant amplitude even when the load on the sample varies, which promotes reproducible results across multiple runs. With a nominal ultrasonic power output of 200 watts and a frequency of 20 kilohertz, the GM 4200 generator delivers sufficient energy to reliably process even more viscous samples.TS 113 sonotrode for volumes up to 900 millilitresThe scope of delivery includes the TS 113 titanium sonotrode, 130 millimetres in length and featuring an M 10 stepped horn connection, designed for sonication volumes of 20 to 900 millilitres. With the UW 200 transducer, the HD 4200 covers a total range of 5 to 1,000 millilitres, depending on which of the available sonotrodes with diameters ranging from 3 to 25 millimetres is used. Users who regularly process smaller or larger volumes can change the sonotrode whilst using the same generator.Pulse mode, timer and batch processingThe time setting ranges from 1 second to 9 hours, 59 minutes and 59 seconds, or continuous operation; an energy display in kilojoules records the energy input per run. The working interval can be set to pulse between 0.2 and 600 seconds, and the rest interval between 0.3 and 600 seconds, so the sample remains cooler between pulses. Nine programme memory slots and batch operation allow several stored sonication programmes to be run automatically one after the other, which is practical for recurring sample series.Operational safetyAccording to the operating instructions, for health reasons it is not permitted to remain in the immediate vicinity of the device for any length of time without hearing protection. The device complies with the CE marking criteria in accordance with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU, and has been tested according to the standards EN 61010-1 (safety) and EN 61326-1 (EMC, Class B according to EN 55011). The device is intended for indoor use at temperatures between 5 and 40 °C and at altitudes of up to 2,000 metres; the generator has degree of protection IP 30 according to DIN EN 60529.Care and maintenance of the sonotrodeAccording to the operating instructions, SONOPULS ultrasonic homogenisers are maintenance-free, apart from process-related wear and tear on the sonotrodes. Cleaning is usually carried out using an alcohol-soaked, lint-free cloth; for sterilisation, the sonotrode can be unscrewed and sterilised separately. If the sound-emitting surface wears down due to cavitation erosion, it can be re-polished until approximately 1 millimetre of material has been removed; after that, replacement is necessary. For frequent use, it is therefore advisable to keep a stock of the sonotrodes in use.Typical applicationsCell lysis in bioanalytics and microbiologyHomogenisation of tissue and cell samplesEmulsification and dispersion of small sample volumesUltrasonic treatment of recurring sample series using stored programmesFrequently asked questionsIs the SONOPULS HD 4200 a medical device?No, it is not declared as a medical device in the product description; it bears the CE mark in accordance with the Low Voltage, EMC and RoHS Directives.What sample volumes are possible with the supplied sonotrode?20 to 900 millilitres with the TS 113 titanium sonotrode; the HD 4200 covers 5 to 1,000 millilitres, depending on the sonotrode.Is hearing protection required during operation?Yes; according to the operating instructions, prolonged exposure to the running device without hearing protection is not permitted for health reasons.Is the device maintenance-free?Apart from wear and tear on the sonotrodes due to cavitation erosion, yes; no further maintenance is provided for according to the operating instructions.Can the device process several samples automatically in succession?Yes; thanks to nine programme memory slots and batch mode, stored sonication programmes can be run automatically one after the other.Technical detailsSonication volume (with TS 113)20 to 900 ml (HD 4200 total range 5 to 1,000 ml, depending on the sonotrode)Nominal ultrasonic power200 WUltrasonic frequency20 kHz ± 500 HzSonotrode included in the setTS 113, titanium, Ø 13 mm, length 130 mm, stepped horn connection M 10Amplitude control10 to 100 % in 1 % increments, with actual value displayTime setting1 second to 9 hours 59 minutes 59 seconds or continuous operationPulsation timesOperating interval 0.2 to 600 s, rest interval 0.3 to 600 sProgramme memory9 memory slots, including batch modeGM 4200 ultrasonic generatorWeight approx. 3.2 kg, external dimensions 335 x 150 x 230 mm (L x W x H)Ultrasonic transducer UW 200Weight 1.6 kg, Ø 70 x 170 mm, protection rating IP 20Total weight of setapprox. 6.5 kg according to the product pageMains connection230 V~ (±10 %) 50/60 Hz or 115 V~ (±10 %) 50/60 Hz, protection class IProtection rating of generatorIP 30 according to DIN EN 60529CE conformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUStandardsSafety EN 61010-1, EMC EN 61326-1 (Class B according to EN 55011)Environmental conditionsIndoor use only, 5 to 40 °C, up to 2,000 m altitudeScope of deliveryGM 4200 ultrasonic generatorUltrasonic transducer UW 200SH 200 G stepped hornTitanium sonotrode TS 113 (Ø 13 mm, for 20 to 900 ml)Assembly toolInstructions for useIndividual requirements and procurement serviceFor additional sonotrodes of other diameters or spare parts, please contact our procurement service.
Bandelin SONOREX DIGITEC DT 100 Ultrasonic Bath, 3 litres, 3210
Thorough ultrasonic cleaning for medical practices, laboratories and workshops The Bandelin SONOREX DIGITEC DT 100 is a robust, high-performance ultrasonic cleaner for medical practices, laboratories and workshops. Intense cavitation bubbles clean thoroughly yet gently, even in hard-to-reach areas of the items being cleaned. The wipe-clean button controls and the LED display showing the remaining cleaning time make it particularly easy to use. SweepTec, pulse and degassing functions for optimum results The fully automatic SweepTec function prevents standing waves in the ultrasonic field and ensures a particularly uniform cleaning effect. The pulse function allows for variable cleaning intensity, whilst the Degas function, which can be activated at the start, rapidly degasses the cleaning fluid, thereby further enhancing the effect of the ultrasound. Suitable accessories for optimal results For optimally tailored ultrasonic cleaning, suitable baskets, lids and cleaning and disinfection concentrates are available as accessories, tailored to different items to be cleaned and areas of application. Technical details Total volume3.0 litres Working volume2.0 litres Internal dimensions (L×W×H)240 × 140 × 100 mm External dimensions (L×W×H)260 × 160 × 250 mm MaterialStainless steel 1.4301, wall thickness 1.0 mm Ultrasonic frequency35 kHz Ultrasonic power80 W (rated), 320 W (peak) HeatingNot available Timer1/2/3/4/5/10/15/30 minutes or continuous operation (±5 %) DisplayLED display, remaining cleaning time Voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit Weight4.2 kg Level indicatorAvailable Degree of protectionIP 33 ClassificationClass I medical device (EU 2017/745) Scope of delivery 1x Bandelin SONOREX DIGITEC DT 100 ultrasonic bath Baskets, lids and cleaning/disinfection concentrates are not included in the scope of delivery and are available separately as accessories. Individual requirements & procurement service Do you need suitable baskets, inserts, lids or cleaning concentrates for your SONOREX ultrasonic cleaner, or are you looking for a heated model? Our procurement service will be happy to help you select suitable accessories.
Bandelin SONOREX smart ST 102 H ultrasonic bath with heating, 3 litres, 40 kHz, 7100
Same tank size as the SUPER RK 100 H, but with a completely different operating system: With a total capacity of 3.0 litres and touchscreen controls, the Bandelin SONOREX smart ST 102 H is the digital alternative for users who wish to fine-tune cleaning cycles and repeat them consistently.Touchscreen instead of a rotary knobA touchscreen takes over the operation instead of a mechanical rotary knob. The ultrasonic power can be adjusted from 10 to 100 % in 1 % increments, whilst the timer accepts any value from 1 second to 8 hours in 1-second increments. Twelve programme memories, including an ECO programme, allow cleaning cycles to be saved once they have been set and recalled later with a single tap, rather than having to reset the time, power and temperature each time.40 kHz instead of 35 kHz, plus DEGAS degassingUnlike the SUPER RK series, the smart ST 102 H operates at an ultrasonic frequency of 40 kHz, with a peak power of 480 watts and a nominal power of 120 watts. In addition to the SweepTec function, there is an automatic DEGAS rapid degassing feature, which removes dissolved air from freshly prepared cleaning fluid before the actual cleaning process begins, supplemented by a pulse mode and an interval operation ranging from 1 to 60 seconds.Heating up to 80 °C, in 1-degree incrementsThe 140-watt heater covers a range from 20 to 80 °C, adjustable in 1-degree increments rather than over a continuous range as with the SUPER RK models, and also features boiling delay protection and dry-run protection. Drainage is via a G 1/4 ball valve with a 25 cm hose on the right-hand side.Hard-chromed tank and system bus interfaceAs with the SUPER RK series, the tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the tank is also hard-chromed. The unit can be connected to a docking station via a system bus interface with a 4-pin M12 socket. A lithium backup battery (CR 2032, 3 V) safeguards the stored programmes even in the event of a power cut.SUPER RK, DIGITEC DT or smart ST: choose the suitable control optionBandelin offers this same compact 3.0-litre tank size in three control concepts: with a rotary knob in the SUPER RK series (such as the RK 100 H), with push-button controls and an LED display in the DIGITEC DT series, or with a touchscreen and programme memory in the smart ST 102 H. Those wishing to store cleaning parameters for different items in a reproducible manner will benefit from the smart ST series, whilst those who prefer simple, robust operation without electronics should opt for the RK 100 H. We also offer Elma Elmasonic ultrasonic baths as a further brand.Use and maintenanceThe working capacity of 2.0 litres is less than the total capacity of 3.0 litres, ensuring that no water spills over the rim when the items to be cleaned are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning fluid. Unlike the SUPER RK models, the DEGAS function of the smart ST 102 H automatically degasses freshly prepared cleaning fluid; a manual pre-run is not necessary. The hard-chromed tank is compatible with standard aqueous cleaning agents, but should be emptied and wiped dry after the last cycle of the day to prevent residues from settling.Typical applicationsReproducible cleaning programmes for recurring test seriesPrecision cleaning of small instruments and sensor tips using stored parametersProcess validation in laboratories and practices with documented settingsConnection to a docking station for networked cleaning processesFrequently asked questionsWhat is the difference between the smart ST 102 H and the SUPER RK 100 H?Both have a tank capacity of 3.0 litres; the smart ST 102 H features a touchscreen, programme memory, DEGAS degassing and operates at 40 kHz instead of 35 kHz.How many programmes can be stored?Twelve, including an ECO programme.Is there a drain?Yes, a G 1/4 ball valve with a 25 cm hose on the right-hand side.Is the appliance also available with a 115 V connection?Yes, according to Bandelin, a 115 V version is available on request, as well as versions with Swiss or British plugs; the model listed here is the standard EU version with 230 V.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mmWeight (net)4.4 kgUltrasonic frequency40 kHzUltrasonic powerPeak power 480 W, nominal power 120 W, power adjustment 10 to 100 % in 1 % incrementsHeating power140 W, temperature range 20 to 80 °C in 1 °C increments, boiling delay protection, dry-run protectionTimer1 second to 8 hours in 1-second increments, automatic safety shut-off after 8 hoursOperationTouchscreenFunctionsSweepTec, DEGAS rapid degassing, Pulse mode, interval 1 to 60 s, 12 programme memories including ECO programme, M12 system bus interface (4-pin)Tank materialStainless steel 1.4301, thickness 1.0 mm, hard chrome-platedHousing materialStainless steel 1.4301DrainG 1/4 ball valve with 25 cm hose, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.2 A / 115 V 2.4 ABack-up batteryLithium button cell CR 2032, 3 VDegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX smart ST 102 H ultrasonic bath with heatingFixed mains lead (2 m)Operating instructionsThe insert basket and lid are not included in the scope of delivery and are available separately.Regulatory informationThe appliance contains a lithium backup battery (CR 2032 button cell, 3 V) for the programme memory. In accordance with the Batteries Act, batteries must not be disposed of with household waste; used batteries can be returned free of charge at local authority collection points and at any shop selling batteries of the relevant type.Individual requirements and procurement serviceThere is a need for individual procurement of the K 3 C insert basket, the PK 2 C plastic basket, the D 100 lid or the docking station. Through our procurement service, you can request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX SUPER RK 510 H ultrasonic bath with heating, 9.7 litres, 321
The same tank as the RK 510, but with a heater: The Bandelin SONOREX SUPER RK 510 H also has a capacity of 9.7 litres (6.6 litres working volume) and adds a 400-watt heater to its unheated counterpart for cleaning processes that require a heated medium.400-watt heating element with dry-run protectionThe heating element operates between 30 and 80 °C and switches off automatically via the integrated dry-run protection as soon as there is insufficient liquid in the tank. Cleaning duration and temperature are set using two separate rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Same ultrasonic power as the unheated RK 510At an operating frequency of 35 kHz, the RK 510 H, like the RK 510, delivers 640 watts of peak power and 160 watts of rated power via four transducer systems, distributed evenly throughout the tank by the SweepTec function. The tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm.Slightly heavier due to the heating technologyWith a net weight of 7.5 kg, the RK 510 H is only slightly heavier than the unheated RK 510 (7.2 kg); the external dimensions of 325 x 265 x 300 mm are identical. A G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting it. Both variants share the same IP 32 protection rating and are classified as a Class I medical device in accordance with Regulation (EU) 2017/745.When the heating system is worth itGrease, oil or wax residues dissolve much more quickly in heated cleaning fluid than at room temperature; likewise, many cleaning concentrates only become fully effective above a certain temperature. Anyone who regularly deals with such contaminants will benefit from the RK 510 H. If, on the other hand, you work exclusively with pre-heated or cold cleaning media, the RK 510, which has the same design, saves on the additional heating technology.Product range: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range of tank capacities extends from 0.9 litres (RK 31) to 58 litres (RK 1050), all featuring rotary knob controls. The DIGITEC DT series is available for digital button operation with an LED display and automatic degassing, whilst the smart ST series offers touchscreen operation with programme memory. We also offer Elma Elmasonic ultrasonic baths as a second brand in our range.Use and maintenanceThe working capacity of 6.6 litres is less than the total capacity of 9.7 litres, ensuring that heated water does not spill over the rim when beakers or instruments are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning solution; it usually dissolves even more effectively at higher temperatures. Before the first cycle with a freshly prepared solution, a short initial run in continuous operation helps to expel dissolved air. After the last cleaning cycle of the day, the tank, whilst still warm, should be drained via the ball valve and wiped dry.Typical applicationsRemoval of grease and oil residues at elevated bath temperaturesHeat-assisted cleaning of instruments and laboratory glasswareCleaning processes using temperature-activated concentratesCleaning of multiple beakers or small parts in a single batchFrequently asked questionsWhat is the difference between the RK 510 H and the RK 510?Both share the same tank; the RK 510 H also has a 400-watt heater with a temperature range of 30 to 80 °C.What is the usable working capacity?6.6 litres out of a total capacity of 9.7 litres.Where is the drain?On the left, as a ball valve with a G 1/2 connection.Is a basket included in the scope of delivery?No, the K 10 insert basket and the D 510 lid are available separately.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.5 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating power400 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 H ultrasonic bath with heaterFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceThe K 10 insert basket, the D 510 lid or the unheated RK 510 version are available on request. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX SUPER RK 510 ultrasonic bath, 9.7 litres, 327
Not every cleaning task requires heat. If you are already working with a medium at a specific temperature or at room temperature, an additional heating element is simply unnecessary technology in the unit. The Bandelin SONOREX SUPER RK 510 has a total capacity of 9.7 litres and a working capacity of 6.6 litres, providing ample space for laboratory glassware and larger small parts; it is deliberately designed without a heating function.Powerful cleaning even without heatAt an operating frequency of 35 kHz, the RK 510 delivers 640 watts of peak power and 160 watts of rated power via four vibration systems. The SweepTec function continuously modulates the ultrasonic field to prevent standing waves from forming and ensure that cavitation acts evenly throughout the tank, even without auxiliary heating.Robust tank for daily useThe tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm. Operation is via a rotary knob; the timer covers 1 to 15 minutes (± 5 %), and continuous operation is also available. With a net weight of 7.2 kg and external dimensions of 325 x 265 x 300 mm, the unit can be moved around the laboratory with minimal effort.Ball valve drain for easy medium changeA G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting or tilting it, which is practical when the cleaning medium needs to be changed frequently. IP 32 protection rating and CE conformity according to the Medical Devices Regulation, the Low Voltage Directive, the EMC Directive and the RoHS Directive allow it to be used in laboratories, medical practices and workshops alike.Selection guide: unheated or with heatingThe RK 510 shares the same tank size as the heated RK 510 H; both have a capacity of 9.7 litres, with a working volume of 6.6 litres. Those working exclusively with cold or pre-tempered media can save on the additional heating technology with the RK 510. As soon as grease or oil residues require a higher bath temperature, the RK 510 H is the more suitable choice, given the identical tank size.Product range breakdown: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range extends from 0.9 litres (RK 31) to 58 litres (RK 1050), with operation consistently via rotary knobs. Those looking instead for a digital display with DEGAS degassing will find this in the DIGITEC DT series, whilst the smart ST series features touchscreen operation with programme memory. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and maintenanceThe working capacity of 6.6 litres is deliberately set below the total capacity of 9.7 litres to prevent water from spilling over the rim when beakers or laboratory glassware are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid. A short pre-run in continuous operation before the first cleaning cycle removes dissolved air from freshly prepared medium. After the last use of the day, the tank can be drained via the ball valve and then wiped dry to prevent limescale or cleaning agent residues.Typical applicationsCleaning of beakers and laboratory glassware without the need for heatDegassing of aqueous solutions prior to analytical proceduresCleaning of tools and small parts in the workshopPre-cleaning of larger batches of instruments prior to further processingFrequently asked questionsCan the RK 510 be heated?No, the RK 510 is the unheated version; the heated version with the same tank size is the RK 510 H.Where is the drain?On the left, as a ball valve with a G 1/2 connection.How much volume is actually available for cleaning?6.6 litres working capacity with a total capacity of 9.7 litres.Is the device a medical device?Yes, Class I according to Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 ultrasonic bathFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 10 insert basket, the D 510 lid or the heated version RK 510 H, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories, a replacement basket or another model from the SONOREX range.
Bandelin SONOREX SUPER RK 1028 ultrasonic bath, 28 litres, 322
Bandelin SONOREX SUPER RK 1028 Ultrasonic Bath for Laboratories and Clinics The Bandelin SONOREX SUPER RK 1028 ultrasonic bath is a high-performance cleaning system from the SUPER-RK series, designed for professional use in laboratories, hospitals and industry. With a tank capacity of 28 litres and a usable working volume of 19 litres, this ultrasonic bath offers sufficient space for larger batches of laboratory glassware, instruments and small parts. The tank is made of 1.4301 stainless steel with a wall thickness of 1.0 mm and is therefore designed for continuous use in demanding laboratory environments where cleaning takes place several times a day. Typical applications for this ultrasonic bath include the gentle cleaning of laboratory glassware and small parts, the cleaning of instruments in medical practices and hospitals, and the degassing of solvents prior to analytical processes. Thanks to the combination of a peak power of 1,200 W and a rated power of 300 W at an operating frequency of 35 kHz, the unit achieves an intensive yet gentle cavitation effect that works reliably even on stubborn residues on pipettes, beakers and tools. The generous tank capacity of 28 litres is also well suited to the simultaneous cleaning of several instruments or vessels in a single cycle, which noticeably increases throughput in day-to-day laboratory work. SweepTec technology and intuitive operation A key feature is the fully automatic SweepTec function, which prevents standing waves in the ultrasonic field and thus ensures uniform cleaning performance throughout the entire tank volume, including in the peripheral areas of the tank, which are often cleaned less thoroughly in simpler ultrasonic baths. Operation is via a simple rotary knob for setting the cleaning duration, selectable between 1 and 15 minutes (± 5 %) or in continuous operation for longer cleaning cycles. A fill-level mark facilitates correct filling with cleaning or disinfectant solution, whilst the G 3/4 ball valve fitted on the side, complete with a 50 cm hose, allows for straightforward and back-friendly emptying of the tank. Side handles ensure safe transport and handling during everyday laboratory use, whilst the 2-metre power cable, which is permanently attached to the unit, provides additional flexibility when positioning the unit at the workstation. Classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and with an IP 32 protection rating, the SONOREX SUPER RK 1028 is also suitable for regulated environments such as medical practices or clinics, where traceability and documentation requirements are important. Technical details Frequency35 kHz Ultrasonic powerPeak power 1,200 W, rated power 300 W Timer1–15 min (± 5 %), plus continuous operation (∞) Tank materialStainless steel 1.4301, wall thickness 1.0 mm External dimensions (L x W x H)535 x 325 x 400 mm Internal dimensions (L x W x D)500 x 300 x 200 mm Weight16.7 kg VolumeCapacity 28.0 l, working capacity 19.0 l Operating voltage230 V AC (± 10 %), 50/60 Hz DrainG 3/4 ball valve with 50 cm hose, left-hand side Mains cable2 m, permanently attached to the unit ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, housing degree of protection IP 32 Packaging dimensions660 x 455 x 460 mm Scope of delivery 1x Bandelin SONOREX SUPER RK 1028 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require additional accessories such as insert baskets, insert beakers, covers or cleaning and disinfection concentrates, a different configuration, or assistance in selecting a suitable ultrasonic bath for your specific application? As a specialist dealer in laboratory supplies, we are happy to assist you with individual procurement enquiries, special configurations and bespoke solutions for laboratory equipment and accessories. For further information, please visit our procurement service, or contact us directly to discuss your requirements.
Bandelin SONOREX SUPER RK 106 Ultrasonic Bath, 5.6 litres, 306
Bandelin SONOREX SUPER RK 106, compact ultrasonic bath for laboratories and medical practices The SONOREX SUPER RK 106 ultrasonic bath, part of Bandelin’s tried-and-tested SONOREX SUPER RK series, is designed for daily use in laboratories, medical practices and manufacturing facilities. With an ultrasonic frequency of 35 kHz, a peak ultrasonic power of 480 W and a nominal power of 120 W, the unit generates intense cavitation that reliably removes even stubborn contaminants. The tank is made of durable 1.4301 stainless steel with a wall thickness of 1.0 mm and offers a total capacity of 5.6 litres, with a usable working volume of 4.0 litres. This makes the RK 106 model a compact yet powerful ultrasonic bath suitable for small to medium-sized batches in everyday laboratory work, without taking up much space on the workbench. The housing is also made entirely of 1.4301 stainless steel, making the unit corrosion-resistant and easy to clean. The compact external dimensions of 265 x 265 x 270 mm allow for flexible installation even in laboratories with limited worktop space, whilst the weight of just 7.4 kg enables easy transport between different workstations. Applications in everyday laboratory work Ultrasonic baths such as the SONOREX SUPER RK 106 are used in many areas of the laboratory: for the gentle cleaning of instruments such as tweezers, scissors and other metal instruments; for the degassing of solvents and aqueous solutions prior to analytical applications such as HPLC or titration; and for cleaning laboratory glassware, pipettes, cuvettes and other small items to remove residues and deposits. The fill-level markings on the tank make it easy to fill it correctly with the cleaning medium, whilst the side-mounted drain with a G ¼ ball valve and a 25 cm long hose allows the tank to be emptied easily and cleanly without having to move or tilt the unit. This straightforward handling proves particularly beneficial in day-to-day operations, especially in laboratories where batches change frequently. As the SONOREX SUPER RK 106 operates without an integrated heater, it is particularly suitable for applications where the cleaning medium is at room temperature or is temperature-controlled separately. SweepTec technology for consistent cleaning results A key feature of the SONOREX SUPER RK 106 is the fully automatic SweepTec function. It prevents the formation of standing waves in the ultrasonic field, thereby ensuring uniform sound distribution and consistent cleaning performance throughout the entire tank volume, regardless of where the items being cleaned are located in the tank. The cleaning duration can be conveniently set using a rotary knob within a range of 1 to 15 minutes (± 5 %); alternatively, continuous operation is available when longer cleaning cycles are required. The robust housing made of 1.4301 stainless steel, the IP 32 protection rating and the 2-metre-long mains cable permanently attached to the unit make the ultrasonic bath a durable and practical piece of equipment suitable for everyday professional use in the laboratory. Technical details Ultrasonic frequency35 kHz Ultrasonic powerPeak power 480 W, nominal power 120 W Timer1–15 min (± 5 %), and continuous operation Capacity / Working capacity5.6 l / 4.0 l Tank materialStainless steel 1.4301, tank thickness 1.0 mm Internal dimensions (L x W x D)240 x 240 x 130 mm External dimensions (L x W x H)265 x 265 x 270 mm Weight7.4 kg DrainG ¼ ball valve with 25 cm hose, right-hand side Operating voltage230 V~ (± 10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit Enclosure protection ratingIP 32 ComplianceCE, Class I medical devices (Regulation (EU) 2017/745), Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), RoHS Directive (2011/65/EU) Scope of delivery 1x Bandelin SONOREX SUPER RK 106 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories such as insert baskets, lids or cleaning concentrates, a different tank size or a model with a heater? We can assist you in selecting the right ultrasonic bath for your application and with the bespoke procurement of laboratory equipment. Find out more at our procurement service or contact us directly for a personalised quote.
Bandelin SONOREX SUPER RK 100 ultrasonic bath, 3 litres, 301
Ultrasonic bath for reliable cleaning in everyday laboratory work The Bandelin SONOREX SUPER RK 100 is a compact ultrasonic bath with a 3-litre tank capacity for the daily cleaning of laboratory equipment, instruments and small parts. The tank has a usable capacity of 2.0 litres and is made from 1.4301 stainless steel with a wall thickness of 1.0 mm, ensuring a robust and durable construction for regular laboratory use. The housing is also made from 1.4301 stainless steel and meets degree of protection IP 32. SweepTec technology and ease of use The unit operates at a frequency of 35 kHz and generates a peak ultrasonic power of 320 W at a rated power (effective ultrasonic power) of 80 W. The fully automatic SweepTec function prevents standing waves in the ultrasonic field, thereby ensuring a particularly uniform cleaning effect throughout the entire tank volume. Operation is via a simple rotary knob for setting the time; the timer covers a range from 1 to 15 minutes (±5 %) and includes a continuous operation mode. A fill-level mark inside the tank makes it easier to fill it correctly with cleaning fluid. The power cable is 2 m long and permanently attached to the unit; it operates at 230 V~ (±10 %), 50/60 Hz. Applications for the SONOREX SUPER RK 100 Thanks to its compact dimensions, the ultrasonic bath is particularly suitable for laboratories with limited space, for example for instrument cleaning, the degassing of solvents or the gentle cleaning of laboratory glassware and small parts. For specific applications, Bandelin offers suitable inserts such as baskets and lids, as well as cleaning and disinfection concentrates, as separate accessories. Technical details ModelSONOREX SUPER RK 100 Frequency35 kHz Ultrasonic peak power320 W Rated power (effective)80 W Timer range1–15 min (±5 %), plus continuous operation Tank volume (capacity)3.0 l Useful capacity2.0 l Tank materialStainless steel 1.4301, wall thickness 1.0 mm External dimensions (L x W x H)260 x 160 x 250 mm Internal tank dimensions (L x W x D)240 x 140 x 100 mm Weight4.3 kg Degree of protectionIP 32 Operating voltage230 V~ (±10 %), 50/60 Hz ConformityCE conformity: Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 100 ultrasonic bath Operating instructions Customised Requirements & Procurement Service Do you need suitable inserts, baskets, lids or cleaning concentrates for your ultrasonic bath, or do you have specific requirements for your laboratory equipment? We support you with a personalised procurement service and will find the right solution for your needs. Find out more at our procurement service.
Bandelin SONOREX SUPER RK 1050 Ultrasonic Bath, 1.4404 Tank, 58 L, 35 kHz, 323
With a total capacity of 58 litres and a working capacity of 41 litres, the Bandelin SONOREX SUPER RK 1050 is the largest model in our current SUPER-RK range. It operates without a heating element and features a welded tank made from high-alloy stainless steel 1.4404 (AISI 316L), a material otherwise only used in the 1028-C/CH variants, though here in a significantly larger size. Like the other units in the series, the RK 1050 is classified as a Class I medical device in accordance with Regulation (EU) 2017/745.Sixteen vibration systems for large-volume cleaningAt 35 kHz, the RK 1050 achieves a peak power of 2,400 watts and a nominal power of 600 watts, distributed across 16 vibration systems in the base of the tank, more than any other model in the range. The automatic SweepTec function modulates the acoustic field and prevents standing waves, ensuring that the cavitation effect remains uniform even across the large tank surface area of 600 x 500 mm. The tank is 2.0 mm thick, and the housing is made from the standard material 1.4301. A pulse function briefly increases the energy output for heavily soiled items.Selection guide: Batch size and tank materialWith a working capacity of 41 litres, the RK 1050 significantly outperforms both the RK 1040 (28 litres) and the 1028 model (up to 30 litres). Those who do not require this capacity but still wish to have the more durable 1.4404 tank will find the RK 1028 C, with a total capacity of 45 litres, to be the smaller alternative made from the same tank material. For those who require a heater in addition to a smaller volume, this combination is available in the RK 1028 CH. A heater is not available for the RK 1050; this model is only available in the range as an unheated version.The 1050 in the SUPER-RK family and our rangeBandelin’s SUPER-RK series covers volumes ranging from less than one litre for the RK 31 up to 58 litres for the RK 1050, with or without a heater, and with either a standard or a 1.4404 tank. For applications requiring a digital display or touchscreen operation, Bandelin offers the DIGITEC DT and smart ST series, although these are currently only available in smaller sizes. In addition to Bandelin, we also offer ultrasonic baths from Elma; their Elmasonic P series utilises switchable dual-frequency technology, offering an alternative for laboratories that do not wish to clean continuously at 35 kHz.Typical applicationsLarge-volume cleaning of laboratory glassware, tools and components in a single operationIndustrial parts cleaning with high throughputUse with more aggressive cleaning concentrates thanks to the durable 1.4404 tankDegassing of larger quantities of cleaning media prior to analytical or industrial processesOperation and maintenanceThe tank is filled to a working capacity of 41 litres; the total volume of 58 litres refers to the tank filled to the brim without any load. The ball valve on the drain is used for emptying; according to the data sheet, this is a G 1/2-inch connection on the left-hand side of the unit. The K 50 insert basket and the matching D 1050 C lid are available as accessories but are not included in the scope of delivery. Due to its net weight of 30.0 kg and gross weight of 56.3 kg, the RK 1050 is dispatched in a carton on a Euro pallet; the power cable is 2 metres long and permanently fitted.Frequently Asked QuestionsHow many vibration systems does the RK 1050 have?16 vibration systems are fitted into the base of the tank, more than any other model in the current range.Is there a heated version?No, the RK 1050 is available exclusively as an unheated model.How is the unit delivered?Due to its gross weight of 56.3 kg, the RK 1050 is shipped in a carton on a Euro pallet.Is the unit suitable for more aggressive cleaning agents?The welded tank made from 1.4404 is generally more resistant to chlorides than the standard material 1.4301; however, the data sheet does not specify approval for any specific chemicals.Technical detailsTotal capacity / Working capacity58.0 l / 41.0 lInternal dimensions of tank (L x W x D)600 x 500 x 200 mmExternal dimensions (L x W x H)640 x 540 x 425 mm, excluding handles/ball valve, with feetWeight (net)30.0 kgShipping weight (gross)56.3 kg, carton on Euro palletUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, nominal power 600 W, 16 vibration systemsHeatingNot applicable, unheated modelTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.7 A / 115 V 5.3 ADegree of protectionIP 32PackagingCarton on a Euro pallet, 1200 x 800 x 740 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1050 ultrasonic bathPermanently attached mains cable (2 m)Instructions for useThe K 50 insert basket and D 1050 C lid are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1050.
Bandelin SONOREX SUPER RK 102 H ultrasonic bath with heating, 3 litres, 303
Thorough ultrasonic cleaning for medical practices, laboratories and workshops The Bandelin SONOREX SUPER RK 102 H is a robust, high-performance ultrasonic cleaner with a heating element for medical practices, laboratories and workshops. Intense cavitation bubbles clean thoroughly and gently, even in hard-to-reach areas of the items being cleaned. The housing, made from 1.4301 stainless steel with a hard chrome plating, is designed for long-term reliability. Uniform cleaning thanks to SweepTec The fully automatic SweepTec function prevents standing waves in the ultrasonic field, thus ensuring a particularly uniform cleaning effect throughout the tank. The rotary knob control allows for simple, intuitive adjustment of cleaning duration and bath temperature, suitable even for daily use without the need for training. Suitable accessories for optimum results For optimally tailored ultrasonic cleaning, suitable baskets, lids and cleaning and disinfection concentrates are available as accessories, tailored to different items to be cleaned and areas of application. Technical details Total volume3.0 litres Working volume2.0 litres Internal dimensions (L×W×D)240 × 140 × 100 mm External dimensions (L×W×H)260 × 160 × 250 mm MaterialStainless steel 1.4301, hard chrome-plated, wall thickness 1.0 mm Ultrasonic frequency35 kHz Ultrasonic power120 W (rated), 480 W (peak) Heating power140 W Temperature range30–80 °C, adjustable Timer1–15 minutes (±5 %) or continuous operation Voltage230 V~ (±10 %), 50/60 Hz Mains lead2 m, permanently attached to the unit Weight5.4 kg DrainG ¼ ball valve with 25 cm hose (right-hand side) Level indicatorFitted Degree of protectionIP 32 ClassificationClass I medical device (EU 2017/745) Scope of delivery 1x Bandelin SONOREX SUPER RK 102 H ultrasonic bath with heating Baskets, lids and cleaning/disinfection concentrates are not included and are available separately as accessories. Individual requirements & procurement service Do you need suitable baskets, inserts, lids or cleaning concentrates for your SONOREX ultrasonic bath? Our procurement service will be happy to support you with the suitable selection.
Bandelin SONOREX SUPER RK 1028 H Ultrasonic Bath with Heating, 1.4301 Tank, 28 L, 35 kHz, 324
Anyone wishing to clean large quantities of laboratory glassware, instruments or workpieces needs a basin that holds more than a tabletop unit, yet still fits on the worktop. The Bandelin SONOREX SUPER RK 1028 H offers exactly this intermediate size: a total capacity of 28 litres, a working capacity of 19 litres and a heater that brings the bath up to 80 °C. Bandelin lists this ultrasonic bath with heating as a Class I medical device in accordance with Regulation (EU) 2017/745; as such, it is suitable not only for laboratories and workshops but also for instrument reprocessing in medical and dental practices.Heated cleaning with a uniform ultrasonic fieldThe 1,300-watt heater regulates the bath temperature continuously between 30 and 80 °C and switches off via the dry-run protection if the water level is too low. Warmer water dissolves fats and dried-on residues more quickly than cold water, which is why the heating function is particularly useful for soiling that comes away only slowly at room temperature. The SweepTec function automatically modulates the ultrasonic field and prevents standing waves in the tank, so that the cavitation effect also reaches the edge areas of the tank. At an operating frequency of 35 kHz, the unit achieves a peak power of 1200 watts with a nominal power of 300 watts; in addition, a pulse function can be activated to provide a brief surge of energy.Selection guide: When is the RK 1028 H worthwhile?When choosing a model from the SUPER-RK series, the batch size is the key factor. With a working capacity of 19 litres, the RK 1028 H is sufficient for several flasks, beakers or a larger number of small parts in a single cleaning cycle; for individual instruments or small batches, the more compact models in the range, such as the RK 100 H with a 3-litre capacity or the RK 510 H with a 9.7-litre capacity, are often sufficient. For cleaning agents that have a more corrosive effect on the standard tank, for example, when more aggressive concentrates are used frequently, the sister models RK 1028 C and RK 1028 CH are available with a welded tank made from molybdenum-alloyed stainless steel 1.4404, which is generally more resistant to chlorides than the 1.4301 material used here. The tank of the RK 1028 H is 1.0 mm thick.The RK 1028 range and alternativesWithin the 1028 size range, the three variants differ only in terms of tank material and heating element: The RK 1028 H features the standard 1.4301 tank and a heating element; the RK 1028 C features the higher-grade 1.4404 tank without a heating element; and the RK 1028 CH combines both. Those who prefer a digital display and push-button controls to a rotary knob will find comparable technology in Bandelin’s SONOREX-DIGITEC range, featuring an LED display for setpoint and actual temperature values; however, this is currently only available in smaller sizes up to 13 litres. In addition to Bandelin, we also offer ultrasonic baths from Elma, such as the Elmasonic P series with switchable dual-frequency technology, for laboratories that wish to switch between two frequencies rather than operating continuously at 35 kHz.Use and maintenanceTo ensure consistent cleaning results, the tank should be filled to a working capacity of 19 litres, not to the total volume of 28 litres; the total volume refers to the tank filled to the brim without the items to be cleaned. To change the cleaning solution, the bath can be drained via the ball valve on the drain, specified in the data sheet as G 1/2 inch on the left-hand side of the unit. Cleaning and disinfectant concentrates for the SONOREX series are available as accessories and are not included in the scope of delivery, nor are the insert basket and lid. The fixed power cable is 2 metres long; the unit operates on either 230 V or 115 V, at 50/60 Hz in each case.Typical applicationsCleaning and preparation of laboratory glassware such as flasks, beakers and pipettesProcessing of instruments in medical and dental practicesDegassing of solvents prior to analytical proceduresCleaning of small parts and tools in workshops and industryFrequently asked questionsHow hot can the water get during operation?The heating system regulates the temperature continuously between 30 and 80 °C; a dry-run protection feature switches the heating off if the water level is too low.Are the basket and lid included in the scope of delivery?No, both are available as accessories; the K 28 insert basket and the D 1028 lid are suitable.Can the unit also be operated at 115 volts?Yes, the RK 1028 H is designed to operate at either 230 V or 115 V, at 50/60 Hz in each case.Is the unit suitable for use in a dental practice?Bandelin classifies the RK 1028 H as a Class I medical device in accordance with Regulation (EU) 2017/745, meaning it can be used for cleaning instruments in dental practices.Technical detailsTotal capacity / Working capacity28.0 l / 19.0 lInternal dimensions of tank (L x W x D)500 x 300 x 200 mmExternal dimensions (L x W x H)535 x 325 x 400 mm, excluding handles/ball valve, including feetWeight (net)14.7 kgShipping weight (gross)17.3 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsHeating power1,300 WTemperature range30 to 80 °C, dry-run protection for the heating elementTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand side (as per data sheet)Mains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 7.0 A / 115 V 14.0 AProtection ratingIP 32Packaging dimensions660 x 455 x 460 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 H ultrasonic bath with heatingPermanently attached mains lead (2 m)Instructions for useThe K 28 insert basket and D 1028 lid are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 H.
Bandelin SONOREX DIGITEC DT 156 Ultrasonic Bath, 6 L, 35 kHz, 3275
At 100 mm deep, the tank of the Bandelin SONOREX DIGITEC DT 156 is shallower than that of the DT 156 BH, whilst the other dimensions remain the same: 500 mm long, 140 mm wide, with a total capacity of 6.0 litres and a working capacity of 4.0 litres. The bath has no heating and is operated via buttons.Flat and longThe inner dimensions of the tank are 500 x 140 x 100 mm. It is made from 1.0 mm thick 1.4301 stainless steel; the housing is made from the same material. Externally, the unit measures 530 x 165 x 245 mm and weighs 6.3 kg; it has no handles. A level mark indicates the fill level. A G ¼ ball valve is fitted on the right-hand side of the drain; a hose connector and hose are included with the unit.Ultrasound without heatingThere is no heating element, so there is no temperature preselection and no boiling delay protection. The current consumption is 0.7 A at 230 V and 1.4 A at 115 V. The ultrasonic energy is generated by four vibration systems (35 kHz, 640 W peak, 160 W nominal power). In addition, there is SweepTec to prevent standing waves, DEGAS for degassing before start-up, and a pulse function.OperationThe duration is set using wipe-clean buttons and shown on the display: 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %), or alternatively, continuous operation. It switches off after 12 hours if no button is pressed. The power cable is 2 m long and permanently attached to the unit.AccessoriesThe K 6 L insert basket (stainless steel, 460 x 100 x 50 mm, mesh size 5 x 5 mm, up to 10 kg) almost fills the entire length of the tank. It is compatible with the lids D 156 and DE 156 (perforated) as well as the SM 6 silicone studded mat (pack of two). The range of accessories also includes 0.6-litre insert beakers, the KD 0 and PD 04 sieve baskets, the PHS 12 sample holder and the FT 6 film test frame with FL 14 films.DT 156, DT 156 BH and the alternativesThe SONOREX DIGITEC DT 156 BH is 150 mm deep, has a capacity of 9.0 litres and features a 600 W heater, whilst retaining the same length and width. The DT 106 has a round tank (Ø 240 x 130 mm) and holds 5.6 litres. The SUPER RK bath SONOREX SUPER RK 156 BH with rotary knobs has the same tank size as the DT 156 BH.Typical applicationsCleaning flat, elongated objectsHomogenisation, emulsification and rapid degassingSonochemistry and sample preparation for analysisInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow deep is the tank?100 mm, with a length of 500 mm and a width of 140 mm.Does the bath have heating?No. The heated version with a deeper tank is the DT 156 BH.Which basket fits?The K 6 L insert basket, 460 x 100 x 50 mm, with a load capacity of up to 10 kg.How many vibration systems does the bath have?Four, operating at 35 kHz and with a peak power of 640 W.Technical detailsTotal capacity / Working capacity6.0 l / 4.0 lInternal dimensions of the tank (L x W x D)500 x 140 x 100 mmExternal dimensions (L x W x H)530 x 165 x 245 mm (excluding handles and ball valve, including feet)Weight (net)6.3 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, nominal power 160 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 minutes (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainG ¼ ball valve, right-hand sideHandlesNoneOperating voltage230 V~ (± 10 %), 50/60 Hz, or 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 0.7 A / 115 V 1.4 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions655 x 265 x 320 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 156 ultrasonic bathPermanently attached mains lead (2 m)Ball valve, hose connector and hose for fitting to the drainThe insert basket, lid, mat and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service can enquire on your behalf about an insert basket, lid or any other SONOREX bath.
Bandelin SONOREX DIGITEC DT 255 ultrasonic bath, 5.5 L, 35 kHz, 3215
The Bandelin SONOREX DIGITEC DT 255 has internal dimensions of 300 x 150 x 150 mm and a total capacity of 5.5 l. It is operated via buttons and does not have a built-in heating element.300 mm long tankThe working capacity is 3.8 l; a fill-level mark inside the tank makes filling easier. The tank and housing are made from 1.4301 stainless steel; the tank has a wall thickness of 1.0 mm. Compared to the DT 510, which has internal dimensions of 300 x 240 x 150 mm, the footprint of the DT 255 is a good third smaller, whilst the length and depth are the same. For even longer items to be cleaned, the SUPER RK 156 BH is designed with a 500 mm tank length; however, it features a rotary knob control instead of buttons.Two vibration systems, 640 watts peak powerAt an operating frequency of 35 kHz, the two vibration systems achieve a peak ultrasonic power of 640 watts; the rated power is 160 watts. The SweepTec function operates fully automatically and is designed to prevent standing waves in the ultrasonic field. There is also a pulse function. The DEGAS degassing function can be activated at the start of the cleaning process to remove dissolved air from freshly prepared medium.Button controls, timer and shut-offThe unit is operated via wipe-clean buttons; the remaining cleaning time can be read on the display. The timer can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (tolerance ± 5 %); alternatively, the bath can run continuously. Twelve hours after the last button press, the unit switches off automatically. For those wishing to heat the bath, the version with a heater is available as the DT 255 H under order number 3240.Drain, handles and installationA drain with a G 1/4 ball valve on the right-hand side is provided for emptying. The ball valve, hose connector and hose for fitting to the drain are supplied with the unit. Handles on the sides make it easier to move the unit, which weighs 4.9 kg. The 2-metre power cable is permanently attached, and the protection rating is IP 33. The permissible ambient temperature is 5 to 40 °C.Matching accessories from the Bandelin rangeFor the DT 255, Bandelin supplies the D 255 lid, the K 5 C stainless steel insert basket (260 x 110 x 40 mm, mesh size 5 x 5 mm, load capacity up to 5 kg) and the perforated lid DE 255 for two insert cups. Insert cups with lids and rubber rings are available in 0.6-litre sizes in glass, plastic and stainless steel. The KW 5 hanging tray made of HD-PE (254 x 96 x 130 mm) is designed for temperatures up to a maximum of 60 °C. The FT 4 foil test frame is used to test the bath.Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizes in laboratories, medical practices and workshopsHomogenisation and emulsificationRapid degassing of liquidsSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments classified as Class I medical devices; the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsDoes the DT 255 have a heating element?No. The heated version is called the DT 255 H and has the order number 3240.How much liquid does the bath hold?The total capacity is 5.5 l; the working capacity is 3.8 l.Are there other plug types available?Yes. Bandelin offers variants with UK, Swiss and US plugs under separate order numbers, for example 3215-GB. The 3215 model offered here is for 230 V with a CEE 7/7 EU plug.What is the DEGAS function for?It is a degassing function that is activated at the start of the cleaning process and is designed to enhance the effect of the ultrasound.Technical detailsTotal capacity / Working capacity5.5 l / 3.8 lInternal dimensions of tank (L x W x D)300 x 150 x 150 mmExternal dimensions (L x W x H)325 x 175 x 295 mm (excluding handles and ball valve, including feet)Weight (net / gross)4.9 kg / 6.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 2 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions495 x 280 x 365 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 255 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, insert cups and cleaning concentrates, and they are available separately.Individual requirements and procurement serviceFor the K 5 C insert basket, the D 255 lid, the DE 255 perforated lid with insert cups or the heated DT 255 H variant, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories or another model from the SONOREX range.