Agitation & Mixing Technology
Stirring and mixing technology covers the homogenisation, dispersion and shaking of samples in the laboratory. LT Laborhandel offers IKA magnetic stirrers, ULTRA-TURRAX dispersers, circular and tumbling shakers from the EUROSTAR and ROCKER series, as well as Heidolph stirrers. Our service team will be happy to advise you on the most suitable equipment.
Heidolph Hei-PLATE Mix 20l Magnetic Stirrer, up to 20 Litres, without Heating, 506-54100-00
If a batch requires more volume than a standard hotplate can accommodate, but at the same time does not require a heat source directly beneath the vessel, the Hei-PLATE Mix 20 l provides exactly this combination: stirring of up to 20 l without any heating function; according to the manufacturer, even the heat from the motor is not transferred to the work surface. The chassis is identical in construction to the Hei-PLATE Mix'n'Heat Core, but without the heating module, and covers a speed range from 100 to 1,400 revolutions per minute.No heat input for heat-sensitive substancesFor substances that are sensitive to heat, any additional source of temperature poses a risk, even the waste heat from a motor. The Hei-PLATE Mix 20 l is therefore deliberately designed without a heating function, ensuring that the base remains cool. A soft-start function gently brings the speed up to the set value, ensuring that the sample does not splash at start-up and the stir bar does not veer off course.Large Kera-Disk platform for 20 lThe 145-millimetre-diameter Kera-Disk platform, made of aluminium with a ceramic coating, is chemical-resistant and scratch-resistant, and can support samples weighing up to 25 kilograms. With a power consumption of just 25 watts in normal operation, energy usage remains low for a unit with this stirring capacity; in standby mode, it drops to 1.7 watts. The external dimensions of 168 x 101 x 299 millimetres are consistent with the rest of the Hei-PLATE range, meaning the unit can be integrated into existing workstations without any modifications.Typical applicationsStirring of large-volume batches up to 20 l without heat inputProcessing of heat-labile active ingredients and dyesPreparation of larger volumes of buffers and reagents in routine laboratory workApplications where even minimal motor heat would interfere with the sampleSupplementing a Hei-PLATE workstation with a second, non-heated unitElectrical protection and environmental conditionsDegree of protection IP42 protects against foreign bodies larger than 1 mm and against obliquely falling dripping water; the sound pressure level is below 50 dB(A). The unit operates at 230 volts at 50 or 60 hertz in Europe and 115 volts in the USA, in each case via a connection with L, N and a protective earth conductor. The permissible operating range is from 5 to 31 °C at up to 80 % relative humidity; above this, the permissible humidity decreases linearly down to 40 °C.Selection guide: smaller volume or with heatingIf 5 litres of stirring volume is sufficient, the more compact Hei-Mix S is the simpler alternative. If a heating plate is required, the identically constructed chassis with a heating module, as the Hei-PLATE Mix'n'Heat Core, delivers temperatures up to 300 °C; with additional digital Pt1000 control, it is available as the Hei-PLATE Mix'n'Heat Core+.Technical detailsDimensions (W x H x D)168 x 101 x 299 mmFootprint (Kera-Disk)Ø 145 mm, aluminium, ceramic-coatedWeightapprox. 3 kgMaximum permissible load25 kgDriveEC motor, counter-clockwise rotationSpeed range100 to 1,400 rpmDegree of protection (EN 60529)IP42Sound pressure level< 50 dB(A)Rated voltage230 V, 50/60 Hz (EU); 115 V, 50/60 Hz (US)Connection typeL+N+PEProtection classIOvervoltage categoryIIPollution degree2Power consumption25 W in normal operation, 1.7 W on standbyEMC classB, Group 1Operating temperature5 to 31 °C at up to 80 % relative humidity, 32 to 40 °C at up to 50 % relative humidity (linearly decreasing)Installation altitudeup to 2,000 m above sea levelScope of deliveryHei-PLATE Mix 20 l, order number 506-54100-00The silicone cover for the Hei-PLATE Mix 20 l is not included in the scope of delivery and must be ordered separately.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Heidolph Scientific Products GmbH, is DE 50705753. Information on the return of old appliances can be found on our Environment and disposal page.Warranty and procurement serviceHeidolph Scientific Products GmbH, Schwabach, provides a 3-year manufacturer’s warranty against defects in materials and workmanship. This excludes glass and wear parts, damage caused during transport, and damage resulting from improper use. If the device is registered with Heidolph, the warranty begins on the date of purchase; otherwise, it begins on the date of manufacture as indicated by the serial number. Your statutory warranty rights remain unaffected. For this model in the Hei-PLATE series, Heidolph offers a 10-year warranty provided the instrument is registered with Heidolph within the first year of purchase. Our procurement service can, if required, source the appropriate silicone cover and other accessories for larger stirring volumes.
Heidolph Hei-PLATE Sensor Basic Package Core+ Magnetic Stirrer Set, Ø145 mm, with Pt1000 Probe, 506-21150-00
A digital display on the hotplate and an external temperature probe in the vessel are, for many laboratories, the first step towards traceable temperature control. The Sensor Basic Package Core+ combines the Hei-PLATE Mix'n'Heat Core+ digital magnetic stirrer, with a footprint of 145 millimetres, with an external Pt1000 temperature probe, whilst remaining a basic configuration without a mounting bracket or silicone cover.LCD display and two heating modesThe Hei-PLATE Mix'n'Heat Core+ included in the pack displays speed and temperature on an LCD screen; the dynamic control knobs respond to the speed of hand movement, slow for fine adjustment, fast for larger increments. There are two heating modes to choose from: FAST for rapid heating and PRECISE for control without overshoot. The included Pt1000 temperature probe (V4A, order number 509-67910-00) measures the temperature directly within the medium rather than just on the heating plate, with an accuracy of ±0.2 Kelvin plus the tolerance of the Pt1000 sensor and a resolution of 1 Kelvin. In conjunction with the probe, the magnetic stirrer covers a display and measurement range from 15 to 325 °C.Why the temperature in the medium mattersWithout an external probe, a heating plate only controls the temperature of its own surface, not that of the liquid in the vessel. For buffers, solutions or reaction mixtures with a defined target temperature, this makes a difference, particularly when the volume or shape of the vessel changes. The Pt1000 probe is immersed in the medium and provides the control system with the actual value. This allows the set temperature to be reproduced independently of the vessel.Typical applicationsBuffer and solution preparations with a fixed target temperature in the vesselReaction mixtures where the temperature is to be monitored directly inside the flaskFirst steps towards documented temperature control without additional accessoriesUpgrading an existing Core+ magnetic stirrer with an external sensorSelection guide: Basic or AdvancedIf you wish to secure the sensor permanently and protect the work surface between uses, you’ll find the right equipment in the Sensor Advanced Package Core+, which includes an additional mount and silicone cover. For reflux set-ups with a condenser, there are the dedicated Core+ and Core+ Mini reflux packages. If you do not require an LCD display and are happy with the simpler rotary knob operation, the Sensor Advanced Package Core offers the analogue alternative.Technical detailsDimensions (W x H x D)168 x 101 x 299 mmHeating plate footprintØ 145 mmWeightapprox. 3 kgMaximum permissible load25 kgDriveEC motor, counter-clockwise rotationSpeed range100 to 1,400 rpmHeating power800 W at 230 V (EU), 600 W at 115 V (US)Heating temperature range20 to 300 °CHeating controlPIDDisplayLCD displayTemperature measurement accuracy±0.2 K plus Pt1000 toleranceTemperature measurement resolution1 KDisplay and measurement range with Pt100015 to 325 °CDegree of protection (EN 60529)IP42Sound pressure levelless than 50 dB(A)Rated voltage230 V, 50/60 Hz (EU), 115 V, 50/60 Hz (US)Power consumptionNormal operation 825 W (EU) / 625 W (US), standby 1.7 WScope of deliveryHei-PLATE Mix'n'Heat Core+ magnetic stirrer, 145 mm base area, order number 506-21100-00Pt1000 temperature sensor (V4A), order number 509-67910-00The mounting bracket and silicone cover are not included with this order number; they are part of the more comprehensive Sensor Advanced package.Regulatory informationThe devices in this package are electrical appliances within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Heidolph Scientific Products GmbH, is DE 50705753. Information on the return of old appliances can be found on our Environment and disposal page.Warranty and procurement serviceHeidolph Scientific Products GmbH, Schwabach, provides a 3-year manufacturer’s warranty against defects in materials and workmanship. This excludes glass parts and wear parts, damage caused during transport, and damage resulting from improper use. If the appliance is registered with Heidolph, the warranty commences on the date of purchase; otherwise, it commences on the date of manufacture as indicated by the serial number. Your statutory warranty rights remain unaffected. Heidolph offers a 10-year warranty on the Hei-PLATE series magnetic stirrer included in the pack, provided the instrument is registered with Heidolph within the first year of purchase. This extended warranty does not apply to the temperature probe, which is sold as an accessory. Our procurement service can supply a mounting bracket, silicone cover or other accessories for the Core+ magnetic stirrer as required.
IKA T 18 mini digital Solution Disperser Set, brushless motor including tool and stand, 0010015137
Not every laboratory workstation has room for a large drive, and not every sample requires 500 watts of power. The IKA T 18 mini digital Solution (0010015137) is designed precisely for these situations: a compact, brushless disperser set with tool and stand that can be accommodated even in small spaces and is designed for samples with lower viscosity. Compact brushless drive With external dimensions of 66 x 186 x 100 millimetres and a weight of 1.8 kilograms, the drive unit is significantly smaller than the classic T 18 digital. The brushless DC motor delivers 210 watts of input power and 160 watts of output power, and is designed for a maximum viscosity of 2,000 mPas. As with the larger series, the speed range extends from 3,000 to 25,000 revolutions per minute, albeit with a slightly higher deviation of 3 %. Digital display, timer and USB-C The LED display shows the set speed, whilst an integrated timer with its own LED display manages the process time, meaning that runs do not need to be stopped manually. The device can be connected to a documentation system via the USB-C interface. In standby mode, power consumption is just 3 watts, whilst the maximum power consumption of the unit is 250 watts. Power is supplied internally via 48 volts DC at a current draw of 4,500 milliamps; the power supply unit itself covers the range from 100 to 240 volts and can therefore be used worldwide without the need for a separate voltage converter. Designed for smaller volumes and lower viscosity According to the manufacturer, the T 18 mini digital Solution is suitable for simple applications involving the homogenisation of low-viscosity samples. As with the larger model, the processable volume ranges from 0.001 to 1.5 litres; however, the maximum viscosity of 2,000 mPas is lower than that of the T 18 digital, which is 5,000 mPas. For routine samples in life sciences laboratories, training centres or smaller-scale quality control procedures that do not involve particularly tough or high-volume batches, the performance is generally adequate. What the compact design means in everyday use With a footprint that is significantly smaller than that of the classic T 18 digital, the T 18 mini digital Solution can be accommodated even where several workstations are positioned close together, such as in practical training rooms or at smaller fume hood workstations. The lower weight of 1.8 kilograms also makes manual operation more comfortable over longer periods when a stand is not used. Those who regularly switch between several workstations also benefit from the fact that the compact unit is easier to transport than the larger series. Typical applications Homogenisation of low-viscosity samples (according to the manufacturer) Smaller batches in life sciences and teaching laboratories Workstations with limited floor space Processes with documented time control via the integrated timer Brief overview within the T-18 range For those requiring higher viscosity or greater motor power, the larger T 18 digital Solution offers the suitable set with a power consumption of 500 watts instead of 210 watts. The drive unit on its own is available as the T 18 digital ULTRA-TURRAX; the dispersing tool included in the set is also available separately as the S 18 N - 19 G dispersing tool. Technical details Motor power consumption210 WMotor output160 WProcessing volume (H₂O)0.001 to 1.5 lMax. viscosity2,000 mPasSpeed range3,000 to 25,000 rpm, continuously variableSpeed deviation3 %Speed displayLEDMotor typeBrushless (direct current)Noise level without tools75 dB(A)Boom diameter13 mmBoom length160 mmProcess typeBatchTimerYes, LED displayPermissible duty cycle100 %Permissible ambient temperature range5 to 40 °CPermissible relative humidity80 %USB interfaceUSB-CMaximum power consumption250 WStandby power consumption3 WDC voltage48 V=Current consumption4,500 mADimensions (W x H x D)66 x 186 x 100 mm (drive unit)Weight1.8 kg (drive unit, excluding stand and tools)Connected load100 to 240 V, 50/60 Hz, 210 W (max. 250 W)Degree of protectionIP 30 (DIN EN 60529) Scope of delivery 1 x IKA T 18 mini digital ULTRA-TURRAX (drive unit) 1 x S 18 N - 19 G dispersing tool 1 x R 1826 plate stand 1 x R 182 boss head Differences from the neighbouring series If you only require the drive unit without the set, it is available as the T 18 mini digital ULTRA-TURRAX. An overview of all our dispersing units can be found in the ‘Dispersing Units’ category; suitable tools are listed under ‘Dispersing Tools’. Application, installation and maintenance With an IP 30 protection rating, the drive unit is slightly better protected against the ingress of foreign objects than the classic T 18 digital with IP 20; however, it is still not designed to withstand splashing water. Operation is permitted at an ambient temperature of 5 to 40 °C and a relative humidity of up to 80 %. The tool’s supplied PTFE bearing must not run dry; the medium provides both lubrication and cooling. The integrated timer reduces the effort required for manual time control in recurring processes, but does not replace the need to monitor the batch. At the end of its service life, as an electrical appliance, the drive must not be disposed of with household waste, but must be placed in the separate collection for waste electrical and electronic equipment. When the mini drive is a worthwhile investment If the viscosity of the samples is up to a maximum of 2,000 mPas and the focus is on a compact design, a timer and documentation via USB-C, the T 18 mini digital Solution reliably meets these requirements. If, on the other hand, tougher media up to 5,000 mPas are regularly processed, or if the higher power consumption of 500 watts is required, the larger T 18 digital Solution is the more suitable choice. Both sets share the same standard tool, the S 18 N - 19 G, so switching between the two sizes does not necessarily change the choice of tool. For laboratories that need to meet both requirements simultaneously, for example a sensitive batch with low viscosity followed by a tougher sample, it may also be worthwhile to purchase both sizes for different workstations. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement service Those who also work with disposable dispersing tools will find the S 18/25-ET50 disposable tube from us to be a practical cleaning aid. Do you also require an additional stand for a second workstation or assistance with the USB connection to your documentation system? Through our procurement service, we support you with procurement and configuration. Frequently Asked Questions For which samples is the T 18 mini digital Solution suitable?According to the manufacturer, it is suitable for simple applications involving the homogenisation of low-viscosity samples, up to a maximum of 2,000 mPas. How does it differ from the larger T 18 digital Solution?The mini drive is brushless with a power consumption of 210 watts instead of 500 watts; it is more compact and designed for a lower maximum viscosity, but features a timer and a USB-C interface. Is a stand included in the scope of delivery?Yes, the set includes an R 1826 plate stand with an R 182 boss head. What is the USB-C interface used for?The USB-C port allows the device to be connected to a documentation system to record process data. What is the drive’s protection rating?IP 30 in accordance with DIN EN 60529, which protects against the ingress of foreign objects larger than 2.5 millimetres, but not against splashing water. Can I operate the drive worldwide without a voltage converter?Yes, the mains adaptor covers a range of 100 to 240 volts at 50/60 hertz.
IKA T 25 digital LR disperser, for laboratory reactors, up to 2,000 ml, 0020008820
Anyone wishing to prepare emulsions, suspensions or nanoparticle formulations not in an open beaker but in a closed, temperature-controlled laboratory reactor will need a drive that can be integrated into this system. The IKA T 25 digital LR disperser (0020008820) is designed precisely for this purpose: a dedicated drive unit for high-speed dispersion in laboratory reactors, with a volume range of 1 to 2,000 millilitres (based on water) and a speed range of 600 to 25,000 revolutions per minute. Unlike a benchtop disperser for open beakers, it is designed from the outset for mechanical integration into closed reactor systems and is not intended as a stand-alone, ready-to-use laboratory instrument. Powerful drive with infinitely variable speed control The 800-watt motor (500 watts output power) covers a continuously and electronically adjustable speed range from 600 to 25,000 revolutions per minute, displayed via a digital LED display with a deviation of just 1 % from the set target speed. In combination with the appropriate IKA dispersing tools, high shear forces are generated in the narrow shear gap between the rotor and stator, which break down particles and droplets and homogenise liquid phases, the classic operating principle of rotor-stator dispersers. The maximum permissible viscosity of the medium is 5,000 mPa·s, a guideline value that must be taken into account when selecting the dispersing tool and controlling the process. Designed for installation in laboratory reactor systems Unlike free-standing bench-top dispersers, the T 25 digital LR is designed as a drive unit only, which can be mechanically coupled with the special dispersing tools of the KD-LR series. These tools are designed for use in closed laboratory reactors such as the IKA LR 1000 and, thanks to high-quality shaft seals, enable operation under vacuum, which is useful for preventing aerosol and foam formation in media containing surfactants or for processing oxidation-sensitive batches under an inert atmosphere. Neither the dispersing tool nor the reactor itself is included with the T 25 digital LR; both must be purchased separately to suit the specific application. Electronic overload protection and digital display An integrated microprocessor maintains the set speed even when the resistance of the medium changes, for example if the viscosity of a batch increases during the reaction. If the stirring tool becomes suddenly blocked, for example by a jammed particle, an electronic overload protection system switches off the motor and displays an error code; this protects both the motor and the coupled dispersing tool. The unit is designed for continuous operation with a permissible duty cycle of 100 %. Compact design for mounting on a reactor stand Measuring 87 x 271 x 106 millimetres and weighing 2.5 kilograms, the T 25 digital LR can be mounted on a reactor stand to save space. The noise level without the dispersing tool fitted is 75 dB(A). The housing is rated to degree of protection IP 20 and approved for an ambient temperature of 5 to 40 °C. It can be connected to either 220 to 240 volts or 100 to 120 volts at 50 or 60 hertz. Selecting the appropriate dispersing tool Which KD-LR tool is suitable in each individual case depends on the reactor volume, the desired immersion depth and the viscosity range of the medium. The tools in this series feature an extended design so that, even in larger reaction vessels, they reach right down to the bottom of the vessel and continue to disperse effectively there, rather than leaving dead volume unused. As the T 25 digital LR is designed as a drive for different reactor sizes and tool variants, the same drive can often continue to be used when process requirements change, whilst only the dispersing tool is replaced. Typical applications As a drive unit for laboratory reactors, the T 25 digital LR is used wherever dispersion processes must take place under controlled, closed conditions: Production of emulsions and creams under air-exclusion conditions in closed reactors Dispersion and homogenisation of suspensions with controlled temperature regulation Scale-up trials between open beaker stirring and pilot reactors Production of finely dispersed systems with limited sample volumes from 1 millilitre Process development in the pharmaceutical and fine chemicals industries with requirements for reproducibility Technical details Product typeDrive unit for dispersing tools in laboratory reactorsVolume range (H₂O)1 to 2,000 mlMotor power (input / output)800 W / 500 WSpeed range600 to 25,000 rpm, electronically continuously adjustableSpeed deviation1 %Speed displayLED displayMaximum permissible viscosity of the medium5,000 mPa·sNoise level (without dispersing tool)75 dB(A)Permissible duty cycle100 % (continuous operation)Motor protectionElectronic overload protection with error code displayDimensions (W x H x D)87 x 271 x 106 mmArm length / Arm diameter160 mm / 13 mmWeight2.5 kgProtection class (to DIN EN 60529)IP 20Permissible ambient temperature5 to 40 °CPower supply220 to 240 V or 100 to 120 V, 50/60 Hz Scope of delivery 1 x IKA T 25 digital LR drive unit 1 x IEC mains cable 1 x operating instructions Not included are the required dispersing tool from the KD-LR series, the laboratory reactor itself, and a stand for mounting the drive unit. These components must be procured separately to suit the specific application. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement service As the T 25 digital LR is designed purely as a drive unit, you will also need a suitable dispersing tool from the KD-LR series and a stand solution to secure the drive in order to operate it on your laboratory reactor. Through our procurement service, we can assist you in selecting the appropriate dispersing tool for your specific application, as well as stand materials, spare parts and accessories for integration into existing reactor systems. Further information and contact details can be found at our procurement service.
IKA C-MAG HS 7 control Magnetic Stirrer with Heating, LCD Display, 20 Litre, 0020002694
As soon as a stirring and heating process is no longer to be carried out merely as a secondary task, but must be documented in a traceable manner, controlled via an interface or regulated based on a temperature measured within the medium, a simple analogue dial reaches its limits. The IKA C-MAG HS 7 control (0020002694) features an LCD display for setpoint and actual values, RS232 and USB interfaces, and a stirring capacity of up to 20 litres; according to IKA, it was awarded the reddot award in 2017. Digital display and interfaces for documented processes Speed and temperature are each displayed on an LCD screen as setpoint and actual values; the display resolution for temperature is 1 Kelvin. The unit can be connected to a control system via the RS232 interface and the USB-B port; the Labworldsoft laboratory equipment software is listed in the range of accessories for this purpose. For laboratory environments with traceability requirements, this is a difference that goes beyond mere usability. Stirring up to 20 litres with automatic direction reversal The speed range extends from 50 to 1,500 revolutions per minute with a deviation of just ±2 % (no load, rated voltage, at 1,500 rpm and 25 °C) and a setting accuracy of 10 revolutions per minute. Automatic direction reversal and interval operation are available, as is viscosity trend measurement, which allows changes in the medium’s viscosity to be monitored during the process. Stirring rods ranging from 30 to 80 millimetres in length can be used; the maximum load on the base is 25 kilograms. Precise temperature control directly within the medium The scope of delivery includes a PT 1000.60 stainless steel temperature sensor; ETS-D5 and ETS-D6 contact thermometers can also be connected. The temperature control accuracy within the medium is ±0.5 Kelvin with the PT1000 probe and as high as ±0.2 Kelvin with the ETS-D6 (measured in each case with 500 ml of water, a 40 mm stirring rod, 600 rpm, 50 °C). A ‘sensor-in-medium’ detection function indicates when the temperature sensor is actually immersed, thereby contributing to process reliability. Typical applications With its digital display, interfaces and precise medium temperature control, the C-MAG HS 7 control is technically suitable for: Syntheses and reactions requiring documented temperature control within the medium Processes with a defined reaction endpoint requiring an accuracy of ±0.5 K or better Stirring processes up to 20 litres with varying viscosity, monitored via viscosity trend measurement Automated or software-controlled laboratory workstations via RS232/USB Quality control with auditable time and temperature profiles Selection guide within the C-MAG series Within the C-MAG family, the ‘control’ version offers a higher level of specification than the analogue version: ModelStirringStirring capacity (H₂O)Heating powerOperation C-MAG HS 7 control (this unit)Yes, 50 to 1,500 rpm20 l1,000 WLCD, PT1000/ETS-D5/ETS-D6, RS232, USB C-MAG HS 7Yes, 100 to 1,500 rpm10 l1,000 WAnalogue scale, LED setpoint temperature C-MAG HS 10Yes, 100 to 1,500 rpm15 l1,500 WAnalogue scale, LED setpoint temperature, plate 260 x 260 mm C-MAG HP 7No, heating plate only10 l1,000 WAnalogue scale, LED setpoint temperature If you do not require the interfaces or precise media temperature control, the C-MAG HS 7 or the C-MAG HS 10 offer a more cost-effective solution. If you already know that processes are to be documented or controlled via software, opting for the ‘control’ version will save you the expense of retrofitting at a later date. Differences from comparable IKA stirrers Compared to the simpler IKA C-MAG HS 7, the ‘control’ version offers an additional LCD display, interfaces and a larger 20-litre stirring capacity. The IKA C-MAG HS 10 retains analogue operation but features a larger 260 x 260 millimetre plate for higher heating power. At the single-station level, with comparable digital capabilities, the IKA Plate (RCT digital) with an LCD display and aluminium base, and the RET control-visc white with an additional weighing function are also available, each with its own specific focus. Technical details Number of stirring stations1 Max. stirring capacity (H₂O)20 l Maximum load25 kg Motor power output9 W Direction of rotationclockwise / anti-clockwise, automatic reversal possible Speed range50 to 1,500 rpm, setting accuracy 10 rpm, deviation ±2 % Stir bar length30 to 80 mm Heating power1,000 W Heating temperature rangeRoom temperature to 500 °C, setting accuracy 5 K, display resolution 1 K Connection for external temperature sensorPT1000, ETS-D5, ETS-D6 Control accuracy in the medium (PT1000 / ETS-D6)±0.5 K / ±0.2 K Safety circuit adjustable100 to 650 °C Additional functionsInterval operation, viscosity trend measurement, timer (1 s to 143,940 min), probe-in-medium detection InterfacesRS232, USB-B Self-heating on the work surface (ambient temperature 22 °C, 1 hour of maximum stirring)+2 K Base material / dimensionsCeramic, 180 x 180 mm Standby power consumption2 W Dimensions (W x H x D)220 x 88 x 354 mm Weight4 kg IP ratingIP 21 (DIN EN 60529) Awardreddot award 2017 Mains connection220 to 230 V, 50/60 Hz, 1,020 W (other voltage variants: 115 V / 100 V available) Scope of delivery 1 x IKA C-MAG HS 7 control magnetic stirrer with heating (0020002694) 1 x PT 1000.60 temperature probe, stainless steel 1 x IKAFLON 30 magnetic stir bar 1 x IKAFLON 40 magnetic stir bar 1 x screwdriver 1 x USB A-to-B cable Use, installation, maintenance and disposal With degree of protection IP 21, the C-MAG HS 7 control is protected against vertically falling dripping water and is designed for operation in a fume hood or on a stable laboratory bench. The temperature of the base surface rises by up to 2 Kelvin during one hour of continuous stirring; this must be taken into account when reading the actual hotplate temperature. The safety circuit can be freely adjusted between 100 and 650 °C and thus adapted to the specific process, rather than being fixed as with simpler models. Before carrying out maintenance work or cleaning the ceramic surface, the unit should be allowed to cool down and disconnected from the mains. At the end of its service life, the device, as an electrical appliance, must be disposed of separately from household waste via the waste electrical and electronic equipment (WEEE) collection scheme; the manufacturer’s WEEE registration number is DE 66784213. Investment rationale: When does the control version pay off? The additional cost compared with the analogue C-MAG HS 7 is particularly worthwhile if temperature profiles need to be documented, read out via RS232 or USB, or controlled within the medium with an accuracy of ±0.5 Kelvin or better. For simple, non-critical heating and stirring processes without a documentation requirement, the additional features are often unnecessary; in such cases, the C-MAG HS 7 or the C-MAG HS 10 with greater heating power is sufficient. If you regularly switch between several workstations using standardised, software-supported process control, the ‘control’ variant pays for itself through the time saved on documentation and calibration. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 10 years upon registration at ika.com/register within 90 days of purchase.Individual requirements and procurement service Additional original accessories are available for the C-MAG HS 7 control if required, such as ETS-D5 or ETS-D6 contact thermometers, support plates, reaction blocks and the Labworldsoft software. Through our procurement service, we also assist you with spare parts and the standardisation of equipment across multiple workstations. Further information and contact details can be found on our procurement service page. Frequently Asked Questions What distinguishes the C-MAG HS 7 control from the standard C-MAG HS 7?The ‘control’ version features an LCD display for setpoint and actual values, RS232 and USB interfaces, automatic direction reversal, viscosity trend measurement and a larger stirring capacity of 20 litres instead of 10 litres. Is a temperature sensor included in the scope of delivery?Yes, the C-MAG HS 7 control comes as part of the scope of delivery with a PT 1000.60 stainless steel temperature sensor. ETS-D5 and ETS-D6 sensors fit the same connection but are available separately. How accurately can the temperature in the medium be controlled?With the supplied PT1000 probe, to within ±0.5 Kelvin; with an optional ETS-D6 probe, to within ±0.2 Kelvin, in each case under the defined measurement conditions specified in the data sheet. Can the safety circuit be adapted to the specific process?Yes, the safety circuit is freely adjustable between 100 and 650 °C, rather than being fixed as in simpler models. Can the device be controlled via software?The RS232 and USB interfaces allow connection to the Labworldsoft software listed in the IKA range of accessories; this enables stirring and heating parameters to be logged centrally rather than being read manually from the device. How should the C-MAG HS 7 control be disposed of correctly?As an electrical appliance, it should be taken to a waste electrical and electronic equipment (WEEE) collection point rather than disposed of with household waste; the manufacturer’s WEEE registration number is listed in the section on ‘Use, installation, maintenance and disposal’.
IKA C-MAG HS 7 Package Magnetic Stirrer with Heating, Ceramic Plate, incl. ETS-D5 and Stand Accessories, 0010016454
Anyone setting up a laboratory workstation from scratch does not want to have to search for the base unit, temperature probe and stand components separately across different orders and check them for compatibility. The IKA C-MAG HS 7 Package (0010016454) combines the tried-and-tested C-MAG HS 7 heating magnetic stirrer with an ETS-D5 contact thermometer, a stand rod, a support rod and a boss head into a ready-to-use combination, thereby saving the hassle of ordering and assembling each component separately. Tried-and-tested base unit with 1,000 watts of heating power The technical specifications of the base unit included in the package correspond to those of the C-MAG HS 7, which is available separately: 10-litre maximum stirring capacity, 1,000-watt heating power, a heating temperature range of 50 to 500 °C with 5 Kelvin setting accuracy, and a 180 x 180-millimetre ceramic base. The stirring drive covers a speed range of 100 to 1,500 revolutions per minute via a six-step scale, whilst a fixed safety circuit limits the hotplate temperature to a maximum of 550 °C. ETS-D5 contact thermometer already included in the set Unlike the C-MAG HS 7, which is available separately, this package already includes an ETS-D5 electronic contact thermometer. It can be connected directly via the DIN 12878 connection socket and enables temperature control within the medium rather than just on the plate surface, a feature that would need to be retrofitted separately if the base unit were purchased on its own. Stand accessories for immediate installation of the sensor For the mechanical mounting of the contact thermometer, the package includes an H 16 V stand rod, an H 38 support rod and an H 44 boss head, so that the probe can be fixed directly above the stirring vessel without the need to purchase additional stand components. Same operation as with the single unit Despite the additional components, the operation of the base unit itself remains unchanged: speed and heating temperature are still adjusted via two separate controls; the six-step scale for speed and the rotary knob for heating temperature remain identical to those on the standard C-MAG HS 7. Anyone who has already worked with a C-MAG HS 7 will find their way around this package without needing any training; the contact thermometer is an additional, but independent, feature. Typical applications As a fully equipped set, the C-MAG HS 7 Package is technically suitable for: Setting up new laboratory workstations without existing stand or probe accessories Syntheses and reactions with temperature control directly within the medium from the very first use Training and education laboratories that require a complete, ready-to-use kit Replacement procurement for workstations where the main unit and accessories are replaced together Batches of up to 10 litres requiring a reproducible medium temperature Selection guide: Package or individual unit Whether the package or the individual C-MAG HS 7 offers better value for money depends primarily on whether the laboratory already has temperature sensors and stand equipment: VersionBasic unitETS-D5 sensorStand accessoriesSuitable forC-MAG HS 7 Package (this product)includedincludedincluded (H16V, H38, H44)New installation without existing accessoriesC-MAG HS 7 (single unit)includedto be procured separatelyto be procured separatelyExisting laboratories with existing accessories Anyone who already has stand material and a compatible temperature sensor will save money by purchasing the basic unit on its own rather than the package, as they won’t have to pay for duplicate accessories. Differences from the other C-MAG-HS-7 models The IKA C-MAG HS 7 offers the same base unit without a sensor or stand accessories, for laboratories that already have these components. For those who, in addition to the package’s standard features, require an LCD display, interfaces and a larger 20-litre stirring capacity, the IKA C-MAG HS 7 control is available. For larger installation areas of up to 260 x 260 millimetres, the IKA C-MAG HS 10 is available. Technical details Number of stirring positions1Max. stirring capacity (H₂O)10 lMaximum load15 kgMotor power output1.5 WSpeed range100 to 1,500 rpm, scale 0 to 6Maximum stir bar length80 mmHeating power1,000 WHeating temperature range50 to 500 °C, rotary knob, setting accuracy 5 KSafety circuit fixed550 °CConnection for an external temperature sensorETS-D5 (DIN 12878), included in the setBase materialCeramicDimensions of the installation area180 x 180 mmPermissible relative humidity80 %Dimensions of the main unit (W x H x D)220 x 105 x 335 mmWeight of the main unit5 kgIP ratingIP 21 (DIN EN 60529)Mains connection230 V, 50/60 Hz, 1,020 W (other voltage options available: 120 V / 100 V) Scope of delivery 1 x IKA C-MAG HS 7 base unit with heating 1 x IKA ETS-D5 electronic contact thermometer (IKA No. 0025008371) 1 x IKA H 16 V stand rod (IKA No. 0001545100) 1 x IKA H 38 support rod (IKA No. 0003547700) 1 x IKA H 44 boss head (IKA No. 0002437700) 1 x IKAFLON 20 magnetic stir bar 1 x IKAFLON 30 magnetic stir bar 1 x IKAFLON 40 magnetic stir bar Use, installation, maintenance and disposal With an IP 21 protection rating, the base unit is protected against vertically falling water droplets and is designed for use in a fume hood or on a sturdy laboratory bench. When assembling the stand, the ETS-D5 sensor should be positioned so that it does not collide with the magnetic stir bar during stirring, and its correct reading should be checked against a suitable reference before first use. The boss head and support rod can be readjusted at any time after initial assembly if necessary, without the need to disconnect the main unit from the mains. The ceramic surface is chemical-resistant, but should be allowed to cool before cleaning. At the end of their service life, as electrical appliances, the main unit and contact thermometer must not be disposed of with household waste but must be placed in the separate collection for waste electrical and electronic equipment; the manufacturer’s WEEE registration number is DE 66784213. Investment rationale: a complete set versus purchasing individual items The package is particularly cost-effective when a workstation is being set up from scratch and neither temperature sensors nor stand components are available, as it eliminates the need to procure individual components and check their compatibility. If compatible accessories are already available in the laboratory, for example, from another C-MAG or RCT/RET workstation, it is often more cost-effective to purchase the base unit separately, as this would otherwise result in duplicate accessories included in the package. Where several new workstations are being set up, it is also worth checking whether stand components and sensors can be procured more cost-effectively in bulk from a central source rather than via several individual packages. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Individual requirements and procurement service Additional original accessories are available for the C-MAG HS 7 Package as required, such as extra stirring rods, reaction blocks, carrier plates, replacement stand components or a protective cover for the control panel. Through our procurement service, we can also assist you with spare parts and the standardisation of equipment across multiple workstations. Further information and contact details can be found on our procurement service page. Frequently Asked Questions What vessel sizes are the stand accessories designed for?The stand rod, support rod and boss head are designed for use on the 180 x 180 millimetre mounting surface of the base unit and can be positioned to accommodate standard beaker and flask sizes up to a maximum stirring volume of 10 litres. What is included in the package that isn’t included with the individual C-MAG HS 7?An ETS-D5 contact thermometer, together with a stand rod, a support rod and a boss head for securing the probe, all with their own IKA number. Is the base unit included in the package technically identical to the individual C-MAG HS 7?The technical specifications of the base unit in the set (10 litres, 1,000 watts, 50 to 500 °C, ceramic plate 180 x 180 mm) are the same as those of the C-MAG HS 7, which is available separately. Does the ETS-D5 contact thermometer need to be calibrated separately?Before its first operational use, it is recommended that it be checked against a suitable reference temperature; factory calibration is not specifically mentioned in the manufacturer’s instructions. Can the stand accessories also be used with other IKA stirrers?The stand rod, support rod and boss head are standard components from the IKA range of accessories and are generally compatible with other C-MAG and RCT/RET models, meaning that synergies can be exploited should the workstation be expanded at a later date. Can the main unit be operated without the ETS-D5 sensor?Yes, the heating can be controlled via the plate temperature regardless of the sensor connected; the sensor is an optional extra for monitoring the medium temperature. How should the package be disposed of correctly?As electrical appliances, the main unit and the contact thermometer should be taken to a collection point for waste electrical and electronic equipment rather than being disposed of with household waste; the manufacturer’s WEEE registration number is listed in the section on ‘Use, installation, maintenance and disposal’.
IKA lab dancer Test Tube Shaker, Touch Function, 2,800 rpm, 0003365000
Briefly mixing a single test tube before the sample goes into the photometer: for this, a whole orbital shaker does not have to start up and no speed has to be set. The IKA lab dancer is tailored to exactly this moment. The tube is pressed by hand against the rubber pad, the touch function immediately starts the circular motion, and on release it stops just as immediately. With a shaking stroke of 4.5 mm and a fixed speed of 2,800 revolutions per minute, the unit covers the classic vortex application for small vessels up to 30 mm in diameter, from test tubes through centrifuge tubes to microtubes. Touch operation for individual tubes Unlike a continuous-running unit with display and timer, the lab dancer has neither a speed display nor a timer. This is not a sacrifice but the concept behind it: anyone who briefly mixes several individual samples one after another, for example before a dilution series or between two pipetting steps, does not need to set any parameters. Press the tube down, wait a few seconds, done. The fixed speed of 2,800 rpm is strong enough for most routine tasks without any control being necessary. With a permissible duty cycle of 100 %, several tubes can be processed directly one after another without the drive having to cool down in between. Compact design for the workstation At 100 x 70 x 100 mm and a weight of only 0.776 kg, the lab dancer takes up hardly any bench space and can be placed directly next to the centrifuge, pipette or photometer, where it is actually needed in the workflow. The power supply is via a supplied 12 V plug-in power supply, which handles input voltages of 100 to 240 V at 50/60 Hz. This allows the unit to be operated at practically any laboratory workstation without an additional voltage converter, even when moving between locations with different mains voltages. Less repetitive movement in everyday laboratory work Anyone who mixes many individual samples one after another every day often resorts to manual shaking by hand without a vortex mixer. The touch function of the lab dancer takes over this repetitive movement: pressing instead of shaking, across any number of individual samples with consistent intensity. This relieves the strain above all in series with many small batches, for example in sample preparation before a measurement series, and at the same time ensures more even mixing than by hand, because stroke and speed remain identical for every operation. Typical applications As a benchtop unit for the quick individual operation, the lab dancer finds its place above all where brief mixing is needed several times a day without a larger orbital shaker being worthwhile: Mixing reagents in test tubes before photometric measurement Resuspending cell pellets in centrifuge tubes after centrifugation Brief mixing of individual samples in routine analysis Homogenising small volumes in tubes between individual pipetting steps Dissolving reagent tablets or powder samples in small vessels Selection guide: which type of shaker is suitable lab dancer, Vortex 2 and ROCKER 3D digital cover three different types of movement at IKA. Which unit is suitable depends on whether individual tubes are to be mixed briefly, larger batches shaken in continuous operation, or sensitive samples moved gently. ProductType of movementSpeed / angleShaking loadOperationlab dancer (this product)circularfixed, 2,800 rpm0.1 kgTouch functionVortex 2circular500 to 2,500 rpm, adjustable0.4 kgTouch or continuous operationROCKER 3D digitalwobbling0 to 80 rpm, tilt angle 0 to 15°2 kgTimer or continuous operation For individual small vessels up to 30 mm diameter and quick in-between use, the lab dancer is suitable. Anyone who regularly mixes larger quantities in continuous operation or needs attachments for plates and flasks will find the more suitable solution in the Vortex 2, and for gentle wobbling of larger vessels the ROCKER 3D digital is better suited. Technical details Type of movementcircularShaking stroke4.5 mmPermissible shaking load (incl. attachment)0.1 kgSpeedfixed, 2,800 rpmMotor power input1.2 WMotor power output0.8 WPermissible duty cycle100 %Touch functionyesPermissible ambient temperature range5 to 40 °CPermissible relative humidity80 %Dimensions (W x H x D)100 x 70 x 100 mmWeight0.776 kgConnection values100 to 240 V, 50/60 Hz, device power consumption 30 W (incl. 12 V plug-in power supply)IP ratingIP 40 (DIN EN 60529) Scope of delivery 1 x IKA lab dancer test tube shaker 1 x 12 V plug-in power supply Differences from the neighbouring series Anyone who wants to move whole flasks, culture flasks or microtitre plates in an orbital motion instead of individual tubes is in the wrong place with the lab dancer design. For this, we offer the IKA hula dancer series, for example the hula dancer basic or the hula dancer digital with adjustable speed. Both are intended for larger, flat set-ups instead of individual small vessels. An overview of all mixers, stirrers and shakers in the range is offered by the category Mixers, stirrers and shakers. Application, installation and maintenance The lab dancer is designed for operation at 5 to 40 °C and a relative humidity of up to 80 %, and degree of protection IP 40 protects against larger foreign objects but not against splashing water. A dry, level laboratory bench within reach of the other work steps is sufficient as a location, and a stand or fixed mounting is not necessary. Maintenance is essentially limited to cleaning the rubber pad on which the tubes rest, especially after contact with aggressive or staining reagents, to avoid carry-over between different samples. Since the unit stands directly on the work surface without a stand, a fixed, easily accessible place near the rest of the sample preparation is worthwhile, so that reaching for the lab dancer does not become a work step of its own. At the end of its service life, the unit as small electrical equipment belongs in the separate collection of waste electrical equipment and not in household waste. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement service Factory calibration certificates and qualification documents (IQ/OQ) are available for the lab dancer, for example for laboratories with documented equipment testing. Do you need one of these documents, an additional plug-in power supply as a spare part or support in choosing between lab dancer, Vortex 2 and ROCKER 3D digital for your specific application? Through our procurement service, we support you with procurement and configuration. Frequently asked questions For which vessels is the lab dancer suitable?For small vessels up to 30 mm diameter, such as test tubes, centrifuge tubes and microtubes. Can the speed be set?No, the lab dancer runs at a fixed speed of 2,800 rpm. Anyone who needs an adjustable speed between 500 and 2,500 rpm will find it in the Vortex 2. Is a power supply included in the scope of delivery?Yes, the lab dancer is supplied with a 12 V plug-in power supply for 100 to 240 V, so a separate purchase is not necessary. How is the lab dancer operated?Via the touch function: the tube is pressed against the rubber pad, which starts the circular motion, and on release it stops again immediately. Is the unit suitable for continuous operation?The permissible duty cycle is 100 %, but the touch principle is designed for short individual operations. For genuine continuous operation with several attachments, the Vortex 2 is the more suitable choice. What degree of protection does the lab dancer have?IP 40 according to DIN EN 60529, suitable for normal laboratory operation, not for damp rooms or splash areas. Can several tubes be mixed at the same time?The lab dancer is designed for one vessel per operation, and the permissible shaking load of 0.1 kg corresponds to the weight of a filled small vessel up to 30 mm in diameter.
Heidolph Hei-PLATE Mix'n'Heat Core+ magnetic stirrer, Ø135 mm, Pt1000 connection, 506-22100-00
If you need a slightly smaller hotplate for a reflux setup with a compact flask or for a space-saving multi-unit arrangement, the Hei-PLATE Mix’n’Heat Core+ in the 135-millimetre version offers the same digital functionality as the 145-millimetre variant, but with a more compact Kera-Disk footprint. The LCD display, dynamic rotary controls and the optional external Pt1000 sensor are identical; it heats up to 300 °C at up to 1,400 revolutions per minute.Same technology, smaller footprintApart from the diameter of the base, this model is technically no different from the 145-millimetre version: the same housing with external dimensions of 168 x 101 x 299 millimetres, the same EC motor with a speed range of 100 to 1,400 revolutions per minute, and the same heating power of 800 watts at 230 volts (EU). Anyone wishing to set up several stirring stations side by side, or who works predominantly with smaller flasks and vessels, will benefit from the slightly smaller diameter of the 135-millimetre Kera-Disk, without compromising on speed or heating power.Two heating modes for different requirementsThe FAST heating mode brings the sample up to temperature quickly, whilst PRECISE then takes over for fine control without overshoot; both modes operate via the optional external Pt1000 sensor with an accuracy of ± 0.2 Kelvin and a resolution of 1 Kelvin. A lock function on the two dynamic rotary controls prevents accidental adjustment whilst tests are in progress; a visual residual heat warning lights up on the base when the temperature reaches 50 °C.Typical applicationsReflux set-ups with the Findenser Mini and a compact flaskSpace-saving multiple set-ups in smaller laboratories or fume hoodsSyntheses with a defined heating ramp using the FAST and PRECISE modesTraining laboratories with limited floor spaceExpansion of existing Core+ workstations with a second, more compact unitLoad capacity and protection ratingWeighing around 3 kilograms, the base can still carry batches of up to 25 kilograms. IP42 protection rating protects against foreign bodies larger than 1 mm and dripping water falling at an angle; the sound pressure level remains below 50 dB(A). The patented Kera-Disk coating made of anodised aluminium is chemical-resistant and scratch-resistant, regardless of the selected diameter.Selection guide: 135 or 145 millimetresIf a larger work surface is required for larger flasks or additional accessories, the Hei-PLATE Mix’n’Heat Core+ (Ø145) is the closer fit. Equipped directly with a Pt1000 sensor, the basic unit is available in the Hei-PLATE Sensor Basic Core+ package; for a complete reflux setup with the Findenser Mini, it is available in the Hei-PLATE Reflux Core+ Mini package. For those who do not require digital temperature measurement, the Hei-PLATE Mix'n'Heat Core offers analogue control.Technical detailsDimensions (W x H x D)168 x 101 x 299 mmFootprint (Kera-Disk)Ø 135 mm, anodised aluminiumWeightapprox. 3 kgMaximum permissible load25 kgDriveEC motor, counter-clockwise rotationSpeed range100 to 1,400 rpmHeating power800 W at 230 V (EU), 600 W at 115 V (US)Heating temperature range20 to 300 °CHeating controlPIDTemperature measurement accuracy± 0.2 K, plus Pt1000 toleranceTemperature measurement resolution1 KDisplayLCD displayDisplay/measurement range15 to 325 °C (with Pt1000 temperature sensor)Degree of protection (EN 60529)IP42Sound pressure level< 50 dB(A)Rated voltage230 V, 50/60 Hz (EU); 115 V, 50/60 Hz (US)Connection typeL+N+PEProtection classIOvervoltage categoryIIPollution degree2Power consumption825 W (EU) / 625 W (US) in normal operation, 1.7 W on standbyEMC classB, Group 1Operating temperature5 to 31 °C at up to 80 % relative humidity, 32 to 40 °C at up to 50 % relative humidity (linearly decreasing)Installation altitudeup to 2,000 m above sea levelScope of deliveryHei-PLATE Mix'n'Heat Core+ (135 mm), order number 506-22100-00The external Pt1000 temperature sensor is not included in the scope of delivery for this item number and is ordered separately or as part of a sensor pack.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Heidolph Scientific Products GmbH, is DE 50705753. Information on the return of old appliances can be found on our Environment and Disposal page.Warranty and procurement serviceHeidolph Scientific Products GmbH, Schwabach, provides a 3-year manufacturer’s warranty against defects in materials and workmanship. This excludes glass and wear parts, damage caused during transport, and damage resulting from improper use. If the device is registered with Heidolph, the warranty begins on the date of purchase; otherwise, it begins on the date of manufacture as indicated by the serial number. Your statutory warranty rights remain unaffected. For this model in the Hei-PLATE series, Heidolph offers a 10-year warranty provided the instrument is registered with Heidolph within the first year of purchase. Our procurement service puts together the suitable Pt1000 probe and accessories for compact reflux set-ups.
IKA EUROSTAR 20 digital Overhead Stirrer, up to 25 l, 40 Ncm, 0020105154
Twenty-five litres of water at a torque of 40 Ncm characterise the lowest power setting of IKA’s current EUROSTAR digital generation. According to the manufacturer, the compact housing requires up to 23 % less floor space than its predecessors, whilst the LCD display shows speed, the timer and a torque trend simultaneously. For standard laboratories that regularly stir small to medium-sized batches and require cleanroom compatibility, the EUROSTAR 20 digital is the entry-level model in the range. The electronics are microprocessor-controlled and maintain the set speed even if the viscosity of the sample changes during the stirring process.Mechanics and tool changeThe brushless DC motor draws 70 watts and delivers up to 22 watts to the stirring shaft, with a duty cycle of 100 % in continuous operation. The speed ranges from 30 to 2,000 revolutions per minute; the maximum torque of 40 Ncm decreases linearly to 20 Ncm at higher speeds. This performance is therefore sufficient for samples up to 10,000 mPas. The Quick Sense Keyless Chuck replaces the traditional chuck key; stirring shafts from 0.5 to 10 mm can be changed with one hand. The hollow shaft, with an internal diameter of 11 mm, can be inserted whilst the unit is stationary, which is practical for stirring elements that are inserted from above.Cleanroom-compatible and protectedWith a noise level of 52 dB(A) without a stirring tool, the EUROSTAR 20 digital achieves ISO cleanroom class 7 at 900 rpm and class 8 at 1,800 rpm, which is relevant for pharmaceutical, biotech and electronics laboratories. The housing, made of coated cast aluminium and thermoplastic, is chemical-resistant and protected against dust and splashing water in accordance with IP 54. A lock button prevents accidental adjustment during cleaning; the unit switches off automatically if the stirring tool becomes blocked or when the torque limit is reached. USB-C and RS232 interfaces connect the stirrer to IKA’s labworldsoft, the measurement and control software that allows speed and time profiles to be documented.Typical applicationsHomogenisation of small to medium batches up to 25 lStirring of low- to medium-viscosity samples in Class 7 or 8 cleanroomsMixing tasks in research and development with documented speed curvesRoutine laboratory work involving frequent tool changes without the need for a chuck keySelection guide: the EUROSTAR series at a glanceThese six EUROSTAR models belong to IKA’s current range: ‘digital’ versions with LCD or LED displays, and ‘control’ versions with a detachable WiCo controller, TFT display and PT1000 temperature measurement. The model number gives an approximate indication of the performance class; the decisive factors are stirring capacity, torque and viscosity limit.ModelMax. stirring volume (H2O)Max. torqueMax. viscosityDisplay/FeaturesEUROSTAR 20 digital (this product)25 l40 Ncm10,000 mPasLCD, USB-C/RS232EUROSTAR 100 digital100 l200 Ncm (short-term)70,000 mPasLCD, USB-C/RS232EUROSTAR 200 digital100 l200 Ncm100,000 mPasLEDEUROSTAR 200 control100 l200 Ncm100,000 mPasTFT, WiCo, PT1000EUROSTAR 400 digital150 l400 Ncm100,000 mPasLEDEUROSTAR 400 control150 l400 Ncm100,000 mPasTFT, WiCo, PT1000For those stirring smaller volumes of up to 5 l, the MICROSTAR and MINISTAR series offer a suitable alternative, such as the MICROSTAR 7.5 control.Technical detailsMax. stirring capacity (H2O)25 lMotor power consumption70 WMotor power output22 WSpeed range30 to 2,000 rpmMax. torque at the stirring shaft40 Ncm (drops to 20 Ncm at 2,000 rpm)Max. viscosity10,000 mPasChuck clamping range0.5 to 10 mmHollow shaft, internal diameter11 mmArm diameter / length16 mm / 220 mmTime setting range for timer1 to 6,000 minHousing materialCoated cast aluminium / thermoplasticDegree of protectionIP 54 (DIN EN 60529)Cleanroom classISO 7 (900 rpm) / ISO 8 (1,800 rpm)Permissible ambient temperature / humidity5 to 40 °C / 80 %Dimensions (W x H x D)89 x 237 x 191 mmWeight3.8 kgConnected load100 to 240 V, 50/60 HzScope of deliveryEUROSTAR 20 digital stirrer (base unit), ID no. 0020105154No separate chuck key required; the Quick Sense Keyless Chuck handles tool changesRegulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Warranty and procurement serviceIKA provides a manufacturer’s warranty for the EUROSTAR 20 digital: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For stirring elements, stands or any other model in the EUROSTAR range, our procurement service will handle the assembly; the full range of stirring and mixing equipment is available in the shop.
IKA EUROSTAR 100 digital overhead stirrer, up to 100 l, 200 Ncm, 0020105157
One hundred litres of water and a peak torque of 200 Ncm elevate the EUROSTAR 100 digital into a performance class intended for larger-scale applications in pilot plants or process development. The housing shares the platform with the smaller EUROSTAR 20 digital; the same compact design here houses a significantly more powerful brushless motor. The LCD display shows speed, the timer and a torque trend; the device can be connected to labworldsoft via USB-C and RS232.Torque: peak value and continuous operationAccording to the manufacturer, the maximum torque of the EUROSTAR 100 digital is 200 Ncm; this value applies to short-term acceleration at 30 to 600 rpm for up to 20 minutes. In continuous operation between 600 and 1,300 rpm, the usable torque ranges from 120 to 100 Ncm; at speeds between 1,300 and 2,000 rpm, it drops further to 100 to 60 Ncm. Anyone stirring highly viscous media up to 70,000 mPas on a continuous basis should therefore base their calculations on the lower continuous value; the peak value is available for brief load peaks during start-up. The brushless DC motor draws 186 watts and delivers up to 136 watts to the stirring shaft.Operation and interfacesThe speed ranges from 30 to 2,000 revolutions per minute and can be adjusted continuously with an accuracy of ±1 rpm. The Quick Sense Keyless Chuck handles tool changes without a chuck key; stirring shafts from 0.5 to 10 mm fit into the chuck. The hollow shaft, with an internal diameter of 11 mm, can be inserted whilst the machine is stationary. With a noise level of 52 dB(A) without a mixing tool, the unit achieves ISO cleanroom class 7 at 900 rpm and class 8 at 1,800 rpm. The housing, made of coated cast aluminium and thermoplastic, is protected against dust and splashing water to IP 54; a lock button and automatic shut-off in the event of a blockage or when the torque limit is reached round off the safety features.Typical applicationsStirring large batches of up to 100 l in pilot plants and process developmentHigh-viscosity media up to 70,000 mPas in continuous operationStarting up viscous formulations with a brief increase in torqueMixing processes in ISO Class 7 or 8 cleanroomsSelection guide: the EUROSTAR series at a glanceThe table compares six models from IKA’s EUROSTAR series: ‘digital’ versions with LCD or LED displays, and ‘control’ versions with a detachable WiCo controller, TFT display and PT1000 temperature measurement. The models differ in stirring capacity, torque and viscosity. With the same performance data, the digital and control versions differ primarily in terms of their displays and interfaces.ModelMax. stirring volume (H2O)Max. torqueMax. viscosityDisplay/FeaturesEUROSTAR 20 digital25 l40 Ncm10,000 mPasLCD, USB-C/RS232EUROSTAR 100 digital (this product)100 l200 Ncm (short-term)70,000 mPasLCD, USB-C/RS232EUROSTAR 200 digital100 l200 Ncm100,000 mPasLEDEUROSTAR 200 control100 l200 Ncm100,000 mPasTFT, WiCo, PT1000EUROSTAR 400 digital150 l400 Ncm100,000 mPasLEDEUROSTAR 400 control150 l400 Ncm100,000 mPasTFT, WiCo, PT1000For those stirring smaller volumes of up to 5 l, the MICROSTAR and MINISTAR ranges offer a suitable alternative, such as the MICROSTAR 7.5 control.Technical detailsMax. stirring capacity (H2O)100 lMotor power consumption186 WMotor power output136 WSpeed range30 to 2,000 rpmMax. torque (short-term, 30 to 600 rpm, up to 20 min)200 NcmContinuous operating torque (600 to 1,300 rpm)120 to 100 NcmContinuous torque (1,300 to 2,000 rpm)100 to 60 NcmMax. viscosity70,000 mPasChuck clamping range0.5 to 10 mmHollow shaft, internal diameter11 mmArm diameter / length16 mm / 220 mmHousing materialCoated cast aluminium / thermoplasticProtection ratingIP 54 (DIN EN 60529)Cleanroom classISO 7 (900 rpm) / ISO 8 (1,800 rpm)Permissible ambient temperature / humidity5 to 40 °C / 80 %Dimensions (W x H x D)89 × 237 × 191 mmWeight3.8 kgConnected load100 to 240 V, 50/60 Hz, 186 WScope of deliveryEUROSTAR 100 digital overhead stirrer (base unit), MPN 0020105157No separate chuck key required; the Quick Sense Keyless Chuck handles tool changesRegulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Warranty and procurement serviceIKA provides a manufacturer’s warranty for the EUROSTAR 100 digital: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For stirring elements, stands or any other model in the EUROSTAR range, our procurement service will handle the assembly; the full range of stirring and mixing equipment is available in the shop.
IKA Vortex 2 Orbital Shaker, 500 to 2,500 rpm, Continuous Operation, 0025000258
Briefly tapping a tube or shaking a whole series of Erlenmeyer flasks for hours: the IKA Vortex 2 covers both with the same drive. As with a classic vortex mixer, the touch function responds to pressing down, and a switch additionally activates continuous operation, in which the unit keeps running without hand contact. The speed can be set continuously between 500 and 2,500 revolutions per minute using a scale from 0 to 6, and the set value is shown directly on the scale. With 39 watts motor power input, the Vortex 2 is considerably above the smaller lab dancer (1.2 watts) and is designed accordingly for higher load changes, for example when a heavier attachment together with a filled Erlenmeyer flask is moved over a longer period. Touch or continuous operation depending on the task For the quick individual operation, the Vortex 2 works like an ordinary test tube shaker: press the vessel down, the circular motion with a 4 mm shaking stroke starts, and releasing it stops the motion again. If continuous operation is activated instead, the unit keeps running continuously at the set speed, for example while an incubation time elapses or several flasks are loaded one after another. The permissible duty cycle of 100 % allows this continuous operation without breaks. Which mode is active is decided solely by the switch on the unit, so changing between the two operating modes costs no conversion time and no separate speed setting. Attachments for tubes, plates and flasks The VG 3.1 standard attachment for test tubes and similar tubes is included in the scope of delivery. In addition, we offer for the Vortex 2 the VG 3.2 single-hand attachment, the VG 3.21 studded attachment and the VG 3.3 universal attachment with matching test tube holders (VG 3.30, VG 3.31 to VG 3.35). Using the VG 3.36 Erlenmeyer flask holder for the universal attachment, Erlenmeyer flasks of up to 250 ml can also be fixed on the Vortex 2 and shaken in continuous operation. This variety of attachments is the essential difference from the smaller lab dancer, which is built exclusively for individual small vessels. For microtitre plates, the VG 3.21 studded attachment is also available, which holds the plate in position during shaking without it slipping. Which attachment is suitable for a particular vessel size depends primarily on how the respective vessel can be fixed securely without tipping over during shaking. Typical applications With touch and continuous operation as well as several attachment options, the Vortex 2 covers a broader range than a pure short-term shaker. Switching between short individual operations and multi-hour continuous operation on the same unit saves reaching for a second shaker in practice: Brief mixing of individual tubes and test tubes via the touch function Continuous shaking of Erlenmeyer flasks of up to 250 ml in continuous operation Mixing samples in microtitre plates with the matching attachment Homogenising during longer incubation or reaction times Routine use in laboratories with changing vessel sizes at the same workstation Brief differentiation within the shaker family Anyone who only wants to briefly mix individual small tubes without changing attachments is often better served by the more compact lab dancer and its fixed speed of 2,800 rpm, especially where space is very limited. For gentle wobbling of larger, sensitive vessels such as culture flasks or gel chambers, the ROCKER 3D digital is the more suitable choice, as the wobbling motion is considerably gentler than the circular vortex motion. Technical details Type of movementcircularShaking stroke4 mmPermissible shaking load (incl. attachment)0.4 kgSpeed range500 to 2,500 rpm, continuously adjustableSpeed displayScale 0 to 6Operating modeTouch function or continuous operationMotor power input39 WMotor power output9 WPermissible duty cycle100 %Permissible ambient temperature range5 to 40 °CPermissible relative humidity80 %Dimensions (W x H x D)120 x 140 x 138 mmWeight3.9 kgConnection values220 to 240 V, 50/60 Hz, device power consumption 60 W (other voltage variants 115 V / 100 V available)IP ratingIP 21 (DIN EN 60529) Scope of delivery 1 x IKA Vortex 2 1 x VG 3.1 standard attachment Differences from the neighbouring series For even higher throughputs or additional features, we also carry the Vortex 3 within the Vortex series as the next expansion stage. Anyone who only occasionally mixes a single tube and can do without attachments will find a simpler variant in the Vortex 1 with the same shaking stroke as the lab dancer. Both models differ from this product in motor power and scope of features, and it is worth taking a look at the exact data sheet before choosing. All orbital, wobble and rocking shakers from IKA can be found in the category Mixers, stirrers and shakers. Application, installation and maintenance The Vortex 2 is designed for 5 to 40 °C and a relative humidity of up to 80 %, and degree of protection IP 21 protects against solid foreign objects of 12.5 mm and larger and against vertically falling drops but not against splashing water. At 3.9 kg and a footprint of 120 x 140 mm, the unit needs a fixed place on a stable laboratory bench, especially in continuous operation with heavier attachments such as the universal attachment together with an Erlenmeyer flask. The permissible shaking load of 0.4 kg including attachment should not be exceeded, otherwise the smoothness of the drive suffers. Between different samples, the attachments should be changed or cleaned to avoid cross-contamination. Changing an attachment itself requires no tools, so the unit can be converted without difficulty during a working day between tubes, microtitre plate and Erlenmeyer flask. At the end of its service life, the Vortex 2 as electrical equipment belongs in the separate collection of waste electrical equipment, not in household waste. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement service In addition to the standard attachments, we offer further test tube inserts for the Vortex 2, the universal attachment including Erlenmeyer flask holder, as well as factory calibration certificates and IQ/OQ documents. Do you need a specific attachment for your vessel size, a spare part for an existing Vortex 2 or support in choosing between the Vortex 2 and the other IKA shakers? Through our procurement service, we support you with procurement and configuration. Frequently asked questions Is an attachment included in the scope of delivery?Yes, the VG 3.1 standard attachment for test tubes is included, and it holds common tubes and microtubes directly. Further attachments for plates or flasks are available separately. Can the Vortex 2 run continuously without anyone holding the vessel?Yes, in continuous operation mode the unit keeps running independently at the set speed, and the permissible duty cycle is 100 %. How precisely can the speed be set?Continuously via a scale from 0 to 6 in the range of 500 to 2,500 rpm, and there is no digital display. Do Erlenmeyer flasks fit on the Vortex 2?With the separately available VG 3.3 universal attachment and the VG 3.36 Erlenmeyer flask holder, flasks of up to 250 ml can be accommodated. What distinguishes the Vortex 2 from the lab dancer?The Vortex 2 offers an adjustable speed of 500 to 2,500 rpm, genuine continuous operation and several attachment options, whereas the lab dancer runs at a fixed speed exclusively in touch operation for individual small vessels. Which mains voltages does the unit support?The standard version runs on 220 to 240 V at 50/60 Hz, and further voltage variants with 115 V or 100 V are available. Does an attachment have to be changed between touch and continuous operation?No, both operating modes run with the same mounted attachment, and switching is done solely via the operating mode switch on the unit.
IKA S 18 N - 19 G Dispersing tool, coarse, PTFE bearings, 10 to 1,500 ml, L004640
The IKA S 18 N - 19 G (L004640) is a tool for coarse dispersion tasks on the IKA T 18 series drives, such as the T 18 digital ULTRA-TURRAX. The stainless steel tool covers a working range of 0.01 to 1.5 litres (10 to 1,500 millilitres, based on water) and is suitable for sample preparation when grinding and mixing are required. Toothed geometry for pre-grinding The letter G in the model designation stands for ‘coarse’. Unlike fine-grinding tools, the stator of this model features a coarsely serrated geometry with a gap width of 0.25 millimetres between the rotor and stator. This makes the S 18 N - 19 G suitable for the pre-grinding of solid sample components, the mixing of pigments or fillers into coarse suspensions, and for viscous media that could clog finer tools. PTFE bearings for contact with aggressive media The rotor shaft is mounted in a PTFE bearing, as indicated by the letter ‘N’ in the model designation. PTFE is chemically almost inert, meaning the tool can, according to IKA, also be used with aggressive solvents, acids and alkalis. One important application note remains: PTFE bearings rely on the medium for lubrication and cooling; the tool must therefore not run dry, otherwise the resulting frictional heat will destroy the bearing. Hygiene and material quality The tool is made of AISI 316L stainless steel and is corrosion-resistant, durable and can be easily dismantled and sterilised for applications in the medical or microbiological fields, whether by chemical disinfection, dry heat or in an autoclave. This reduces the risk of cross-contamination between different sample batches. Typical applications According to the manufacturer, the S 18 N - 19 G is designed as a dispersing tool for T-18 drives and for volumes ranging from 10 to 1,500 millilitres. In practice, it is suitable for: Preliminary grinding of solid components in liquid samples Coarse suspensions containing pigments or fillers Viscous media that would be too viscous for finer tools Sample preparation with high requirements for chemical resistance Selection guide within the tool range In addition to the coarse version described here, there are further tools for the T-18 drives with different gap geometries or made from different materials. The S 18 N - 10 G, with a narrower gap width, is suitable for finer end products; for single-use procedures and applications where no cleaning is required between samples, the plastic tools S 18 D - 10 G - KS and S 18 D - 14 G - KS are available. Technical details Compatible drivesT 18 digital ULTRA-TURRAX and other T-18 drives (see Compatible drives)Processable volume (H₂O)0.01 to 1.5 lStator diameter19 mmRotor diameter12.7 mmGap width between stator and rotor0.25 mmMaximum permissible speed25,000 rpmMaximum circumferential speed16.6 m/sImmersion depth35 to 170 mmInstallation length204 mmMaterial in contact with the productPTFE, AISI 316L stainless steelpH range2 to 13Suitable for solventsYesSuitable for abrasive substancesYesMax. operating temperature180 °CSterilisabilityAll methodsFinal particle size of suspensions10 to 50 µmFinal particle size (emulsions)1 to 10 µmWeight0.379 kg Scope of delivery 1 x IKA S 18 N - 19 G dispersing tool A drive unit is not included; the tool is operated on a compatible T-18 drive. Compatible drives The S 18 N - 19 G is designed for use with several drives in the T-18 range: the T 18 digital ULTRA-TURRAX, as well as the T 18 digital Solution and T 18 mini digital Solution complete sets, which already include this tool. According to the manufacturer’s compatibility information, it is also compatible with the brushless drives T 18 brushless digital ULTRA-TURRAX, T 18 brushless digital Solution and the compact T 18 mini digital ULTRA-TURRAX. Use, maintenance and disposal Before first use, the tool should be securely screwed onto the drive unit and checked to ensure it is firmly in place. During operation, the tool must remain fully submerged in the medium at all times; the immersion depth ranges from 35 to 170 millimetres, depending on the container. After use, the tool can be detached from the drive unit for cleaning and, depending on requirements, chemically disinfected, treated with dry heat or autoclaved. As an accessory to an electrical appliance, the end-of-life tool must not be disposed of with household waste, but must be disposed of properly together with the associated drive unit. Individual requirements & procurement service Do you require a tool for finer emulsions, a spare part or assistance in selecting the appropriate gap geometry for your sample? Through our procurement service, we can assist you with procurement and compatibility enquiries. Frequently Asked Questions Which drives is the S 18 N - 19 G suitable for?It is suitable for the T-18 drive family, including the T 18 digital ULTRA-TURRAX and the T-18 brushless drives. What do the letters G and N in the name mean?G stands for the coarse-toothed stator geometry, and N for the PTFE bearing on the rotor shaft. Can I use the tool with solvents?Yes, the PTFE bearing is virtually chemically inert and suitable for aggressive solvents, acids and alkalis, provided the tool does not run dry. Is the tool autoclavable?Yes, according to the manufacturer, it can be sterilised using all standard methods, including autoclaving.
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
Anyone who frequently homogenises samples in the laboratory will be familiar with the problem: a good drive alone is not enough; ultimately, it is the right tool that determines the final fineness and throughput. The IKA T 18 digital ULTRA-TURRAX (0003720000) is designed precisely with this in mind. It is supplied as a drive unit only, with a power consumption of 500 watts, which can be freely combined with various S-18 tools for coarse, fine or single-use applications. The LED display always shows the set speed between 3,000 and 25,000 revolutions per minute, which facilitates reproducible results across multiple test runs. Rotor-stator principle with high shear rates During dispersion, the tool draws the sample in axially and forces it out radially through the narrow slots between the rotor and stator. This briefly generates very high shear rates, which break down solid components and mix liquids into stable emulsions or suspensions. With an output power of 300 watts and a processable volume of 0.001 to 1.5 litres (based on water), the T 18 digital covers typical laboratory batches up to a maximum viscosity of 5,000 mPas. Stepless speed control with LED display The speed can be adjusted continuously between 3,000 and 25,000 rpm, with a deviation of just 1 % according to IKA. Unlike purely analogue controllers, the LED display shows the set value directly. Once process parameters have been determined, they can be noted down and reproduced exactly for subsequent experiments. With a permissible duty cycle of 100 %, prolonged continuous operation is also possible without the drive having to pause in between. The choice of tool determines the result The T 18 digital is deliberately supplied without a dispersing tool, as the most suitable tool depends heavily on the specific sample. The standard S 18 N - 19 G tool with PTFE bearings is suitable for coarse pre-shredding and tougher media, whilst the S 18 N - 10 G offers a narrower gap geometry for finer end products. Those who frequently work with varying samples that are potentially susceptible to contamination will find disposable plastic tools to be a practical alternative, as they reduce the risk of cross-contamination between batches. Typical applications As a standalone drive unit, the T 18 digital is particularly suitable for laboratories that already work with a variety of tools or switch specifically between several applications: Preparation of emulsions and suspensions in sample preparation Homogenisation of tissue samples in biology and life sciences research Mixing pigments and fillers into dispersions Routine tasks in quality assurance with varying tool configurations Setting up customised workstations through flexible combination with a stand and tool Selection guide for the T-18 range Drive unit only, complete set or just the tool? The four products compared here differ primarily in terms of what is included in the scope of delivery and, in the case of the mini-drive, in terms of motor power. ProductTypeMotor power (input/output)Speed rangeScope of deliveryT 18 digital ULTRA-TURRAX (this product)Drive unit500 W / 300 W3,000 to 25,000 rpmDrive unit only, without toolsT 18 digital SolutionSet500 W / 300 W3,000 to 25,000 rpmDrive unit, S 18 N - 19 G tool, stand, boss headT 18 mini digital SolutionSet, compact drive210 W / 160 W3,000 to 25,000 rpmDrive unit, tool S 18 N - 19 G, stand, boss headS 18 N - 19 G dispersing toolSingle toolNo built-in motorPermitted up to 25,000 rpmTool only Anyone who already owns a T-18 drive or wishes to switch between several tools as required is best served by the drive described here, which does not require a tool. The complete T 18 digital Solution Set is suitable for getting started straight away without having to order a separate tool; those looking for a more compact workstation will find the T 18 mini digital Solution to be a suitable alternative with lower motor power. Technical details Motor power input500 WMotor power output300 WProcessing volume (H₂O)0.001 to 1.5 lMax. viscosity5,000 mPasSpeed range3,000 to 25,000 rpm, continuously variableSpeed deviation1 %Speed displayLEDNoise level without tools75 dB(A)Support arm diameter13 mmSupport arm length160 mmProcess typeBatchPermissible duty cycle100 %Permissible ambient temperature range5 to 40 °CPermissible relative humidity80 % (up to 31 °C), decreasing linearly to a maximum of 50 % (at 40 °C)Dimensions (W x H x D)87 x 271 x 106 mmWeight2.5 kgConnected load220 to 240 V, 50/60 Hz, 500 W (other voltage options from 100 to 120 V available)IP ratingIP 20 (DIN EN 60529) Scope of delivery 1 x IKA T 18 digital ULTRA-TURRAX (drive unit, without dispersing tool) The dispersing tool and stand are not included and must be purchased separately to suit the specific application. Differences from the neighbouring series If you also require a brushless motor with a timer, the IKA T 18 brushless series offers the next step up: the T 18 brushless digital ULTRA-TURRAX as a drive unit without a tool, or the T 18 brushless digital Solution as a complete set. Both drive units operate with lower wear than the classic T 18 digital. An overview of all dispersers can be found in the ‘Dispersers’ category; suitable tools are listed under ‘Dispersing Tools’. Application, set-up and maintenance For short-term manual operation, the T 18 digital fits comfortably in the hand; for longer or reproducible processes, it can be securely mounted on a stand, such as the R 1826 plate stand. Operation is permitted at an ambient temperature of 5 to 40 °C and a relative humidity of up to 80 % at 31 °C, decreasing linearly to a maximum of 50 % at 40 °C. The drive, with degree of protection IP 20, is not designed for use in damp rooms or outdoors. After each use, the tool used should be dismantled and, depending on the material, cleaned or sterilised before the next procedure begins. At the end of its service life, as an electrical appliance, the drive must not be disposed of with household waste but must be placed in the separate collection for waste electrical and electronic equipment. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement service In addition to the standard tools, further accessories for the T 18 digital are also available, such as stands, mounting elements or the Silentstream flow breaker to reduce air ingress during dispersion. Do you require a specific tool, a qualification document or assistance in selecting the right configuration? Through our procurement service, we can assist you with procurement and configuration. Frequently Asked Questions Is a dispersing tool included in the scope of delivery?No, the T 18 digital is supplied exclusively as a drive unit. A suitable tool, such as the S 18 N - 19 G, must be purchased separately. Which tool is suitable for coarse pre-grinding?For coarse applications and tougher media, the S 18 N - 19 G with PTFE bearings is the standard choice; finer end products can be achieved with the S 18 N - 10 G. How accurately can the speed be reproduced?The LED display shows the set value within a range of 3,000 to 25,000 rpm with a deviation of around 1 %, which facilitates the exact repetition of test series. Is a stand included in the scope of delivery?No; for continuous operation, we recommend a separately available stand such as the R 1826 plate stand. What is the difference between the T 18 digital and the T 18 mini digital Solution?The T 18 mini digital Solution features a more compact, brushless drive with lower motor power and comes as a set including the tool and stand; the T 18 digital described here is the more powerful drive unit without accessories.
IKA T 10 battery Complete Solution disperser set, including stand, up to 30,000 rpm, 0010015688
The T 10 battery Complete Solution complements the battery-powered T 10 battery ULTRA-TURRAX disperser by providing the equipment required for stationary operation on a laboratory bench. In addition to the dispersing tool, a boss head and a stand are included so that the unit can be secured in place during use.What else is included in the Complete SetThe drive unit and the S 10 N - 5 G dispersing tool are complemented by an H 44 boss head and an R 104 stand. This allows the disperser to be secured to the stand, keeping it in position during longer process steps without the need for someone to hold it in place continuously. For batch work on the laboratory bench, this is a significant improvement over manual operation alone.Same drive unit as the stand-alone modelThe technical specifications of the drive unit correspond to those of the separately available T 10 battery ULTRA-TURRAX: Continuously variable speed from 8,000 to 30,000 revolutions per minute, processable volume from 0.5 to 100 millilitres (H₂O), battery with 10.8 volts and 34.56 watt-hours of energy capacity, rechargeable via USB-C cable or charging clamp.Stand for stationary operationThe R 104 stand, together with the H 44 boss head, holds the disperser in a fixed position above the vessel. This reduces strain on the hand when processing multiple samples in succession and ensures a more consistent immersion depth of the tool from sample to sample.Documentation for all set componentsThe set includes separate operating instructions for the stand, boss head and dispersing tool, in addition to the multilingual instructions for the drive unit itself. Anyone requiring multiple language versions during operation can access the relevant documents without having to make a separate enquiry.Change the tool size as requiredThe supplied S 10 N - 5 G tool covers a diameter of 5 millimetres. For larger or smaller sample quantities, a different tool from the same T-10 series, for example with a diameter of 8 or 10 millimetres, can be attached via the quick-release coupling without having to change the stand or drive unit. The stand itself remains in place; only the tool head is changed.Typical applicationsStationary sample preparation on a laboratory bench with a stand mountBatch processing where the device is to remain in position between samplesAn entry-level model in the battery-powered T-10 series with a complete basic kitSelection guide: Complete, Portable or Tissue Safe?If you mainly work in a stationary setting and value having a stand and clamp, the Complete Solution is suitable for you. For mobile use without a stand, the slimmer T 10 battery Portable Solution is sufficient. For tissue samples requiring sterile, single-use tools, the T 10 battery Tissue Safe Solution is more suitable. If you only need the drive unit without accessories, order the T 10 battery ULTRA-TURRAX separately or, for mains operation, opt for the T 10 basic ULTRA-TURRAX.Technical detailsMotor power input / output30 W / 25 WProcessable volume (H₂O)0.5 to 100 mlMax. viscosity200 mPasSpeed range8,000 to 30,000 rpm, continuously variable (deviation 5 %)Speed displayLCDMotor typebrushless, direct currentNoise level without tools65 dB(A)Boom diameter / boom length8 mm / 100 mmDuty cycleON 10 min, OFF 5 minTimerYes, LCD displayPermissible ambient temperature / humidity5 to 40 °C / 80 %Degree of protectionIP 30 in accordance with DIN EN 60529USB interfaceUSB-CCharging input15 V =, max. 45 W, 3,000 mABattery typeCustom LiPo, 3 cells, type 18650-3S1PBattery capacity34.56 WhBattery voltage10.8 VBattery installationpermanently fittedDimensions (W x H x D) of drive unit53 x 239 x 70 mmWeight of drive unit0.5 kgIncluded stand / boss headR 104 stand / H 44 boss headScope of deliveryT 10 battery ULTRA-TURRAX drive unit including permanently fitted batteryS 10 N - 5 G dispersing tool, reusable, stainless steel, 5 mmH 44 boss head, ID no. 0002437700R 104 stand, ID no. 0003386000Regulatory informationThe drive unit in this set is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). It contains a permanently installed lithium battery and, together with the battery, must not be disposed of with household waste. The WEEE registration number of the manufacturer IKA is DE 66784213. Information on the return of old appliances can be found on our Environment and disposal page.Warranty and procurement serviceThe T 10 battery Complete Solution is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. For further accessories, such as additional dispersing tools, our procurement service will handle the assembly.
IKA T 18 digital Solution Disperser Set, including tool and stand, 0009024700
For those who want to get started straight away, without having to assemble the drive, tool and stand individually first, the IKA T 18 digital Solution (0009024700) offers a fully coordinated complete package. The set combines the tried-and-tested T 18 digital drive with the standard S 18 N - 19 G dispersing tool and a sturdy plate stand complete with boss head, all ready for use straight out of the box. Everything included for an immediate start Instead of ordering four separate items and checking whether they fit together, the Solution version supplies all components in a single package: Drive: IKA T 18 digital ULTRA-TURRAX with 500-watt power consumption Dispersing tool: S 18 N - 19 G with PTFE bearings for coarse to medium-duty applications Mounting: R 1826 plate stand including R 182 boss head for a stable, low-vibration base Digital speed control with LED display The speed range extends from 3,000 to 25,000 revolutions per minute, is infinitely variable and has a deviation of around 1 % according to the data sheet. The LED display shows the set value directly, so that once process parameters have been determined, they can be noted down and repeated for subsequent trials. With an output power of 300 watts, the drive can process samples with a viscosity of up to 5,000 mPas. With a permissible duty cycle of 100 %, the drive can also be operated continuously for longer process stages without the need to schedule a cooling break between batches. Tool S 18 N - 19 G ready for use The supplied tool covers a working range of 10 to 1,500 millilitres and, with its coarsely toothed geometry, is suitable for the pre-shredding of solid components as well as for more viscous media. The rotor shaft is mounted in PTFE, which is resistant to most solvents, acids and alkalis. Details on the design and limit values of the tool can be found in the separately listed S 18 N - 19 G dispersing tool. Interchangeable tool for different samples Even though the set is already equipped with a suitable tool, the drive remains compatible with the entire S-18 tool range. A quick-release coupling allows for tool changes without the need for a tool kit, meaning that, if required, a finer tool for smaller end products or a single-use tool for contamination-sensitive batches can be fitted. For day-to-day use with varying sample types, this is a noticeable advantage over a permanently fitted tool: the set covers the basics but grows in line with the laboratory’s requirements. Typical areas of application As a complete package, the T 18 digital Solution is particularly suitable for new purchases and the setting up of additional workstations: Re-equipping laboratory workstations without existing dispersion accessories Preparation of emulsions and suspensions in sample preparation Homogenisation of samples in quality control and routine analysis Teaching and training laboratories where a ready-to-use kit is required Brief overview within the T-18 range In addition to this set, we offer the T 18 digital ULTRA-TURRAX drive (without tool) for those who already own their own accessories, as well as the more compact T 18 mini digital Solution with a brushless drive and lower motor power for smaller work surfaces. Anyone wishing to reorder just the included tool separately can find it as the S 18 N - 19 G dispersing tool. Technical details Motor power input500 WMotor power output300 WProcessable volume (H₂O)0.001 to 1.5 lMax. viscosity5,000 mPasSpeed range3,000 to 25,000 rpm, continuously variableSpeed deviation1 %Speed displayLEDNoise level without tools75 dB(A)Boom diameter13 mmBoom length160 mmProcess typeBatchPermissible duty cycle100 %Permissible ambient temperature range5 to 40 °CPermissible relative humidity80 % (up to 31 °C), decreasing linearly to a maximum of 50 % (at 40 °C)Dimensions (W x H x D)87 x 271 x 106 mm (T 18 digital drive unit)Weight2.5 kg (drive unit, excluding stand and tools)Connected load220 to 240 V, 50/60 Hz, 500 W (other voltage variants from 100 to 120 V available)Degree of protectionIP 20 (DIN EN 60529) Scope of delivery 1 x IKA T 18 digital ULTRA-TURRAX (drive unit) 1 x S 18 N - 19 G dispersing tool 1 x R 1826 plate stand 1 x R 182 boss head Differences from the neighbouring series If you are also looking for a brushless motor with a timer, the IKA T 18 brushless series offers a comparable set with an additional timer function in the form of the T 18 brushless digital Solution. An overview of all dispersers available from us can be found in the ‘Dispersers’ category. Application, installation and maintenance The supplied plate stand ensures a secure, low-vibration base even at high speeds. Operation is permitted at an ambient temperature of 5 to 40 °C and a relative humidity of up to 80 % at 31 °C, decreasing linearly to a maximum of 50 % at 40 °C. The PTFE bearing of the supplied tool must not run dry; the medium serves both as lubrication and cooling. After use, the tool can be disconnected from the drive for cleaning or sterilisation, as can the stand, which can be detached again for the next configuration. At the end of its service life, the drive, as an electrical appliance, does not belong in household waste but in the separate collection for waste electrical and electronic equipment. When the complete set is worthwhile For laboratories that do not yet own a T-18 drive, the set saves time on ordering and compatibility checks compared to purchasing the drive, tool and stand separately. On the other hand, those who already have a suitable stand or several tools and only require an additional drive may find it more cost-effective to opt for the separately available T 18 digital ULTRA-TURRAX without the set. For a second or third workstation with identical equipment, however, the complete set is once again a suitable option, as each station is equipped independently of the others. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement service Do you require additional or alternative tools for abrasive or particularly viscous media, a second stand for an extra workstation, or assistance in selecting the right configuration? Through our procurement service, we support you with procurement. Frequently asked questions Is the T 18 digital Solution ready for immediate use?Yes, the drive, the S 18 N - 19 G dispersing tool and the plate stand are included in the set and are designed to work together. Which tool is included in the set?The S 18 N - 19 G with PTFE bearings, suitable for coarse pre-shredding and a working volume of 10 to 1,500 millilitres. How does the set differ from the T 18 digital drive sold separately?The T 18 digital ULTRA-TURRAX drive, available separately, is supplied without the tool or stand; the Solution Set already includes both components. Can I use a different tool instead of the one supplied?Yes, the drive is compatible with the entire S-18 range of tools, so finer or coarser variants can be retrofitted if required. Is the stand permanently attached to the drive?No, the drive, tool and stand can be detached from one another, for example for cleaning or for use at different workstations.
IKA RH basic ETS-D5 Solution Magnetic Stirrer Complete Package, aluminium base, 0020106987
The IKA RH basic ETS-D5 Solution Complete Package (MPN 0020106987) is a robust and thermally precise solution for the simultaneous stirring and temperature control to the nearest degree of liquid media in the laboratory. This turnkey package combines the RH basic heating magnetic stirrer with the ETS-D5 electronic contact thermometer and the appropriate mounting accessories. Whether for routine processes in chemical analysis, sample preparation in testing laboratories or reproducible mixing operations in industrial quality control, this complete set enables reliable, process-safe operation in continuous use. Heat-conductive aluminium base The structural foundation of the stirring drive is a circular base with a diameter of 135 millimetres, made from an aluminium alloy with enhanced surface strength to ensure a long service life. One litre of water achieves a heating rate of around 5.5 Kelvin per minute, whilst the surface’s self-heating caused by stirring at maximum speed is limited to around 6 Kelvin (based on a room temperature of 22 °C over one hour). This further limits the thermal stress on temperature-sensitive samples, in addition to external control via the ETS-D5, and the surface can be cleaned quickly and without leaving any residue in everyday laboratory use. Media temperature control accurate to the degree via the ETS-D5 contact thermometer The highlight of this solution package is the direct thermodynamic control within the medium via the ETS-D5 electronic contact thermometer, which is included in the scope of delivery. The accompanying PT1000 probe is positioned stably directly within the liquid core of the sample using the stand components and measures with a resolution of 0.1 Kelvin and an accuracy of ±0.2 Kelvin plus probe tolerance (Class A). Using optimised PID control, the RH basic continuously adjusts its heating power to the measured actual values, preventing the temperature from overshooting the target temperature. In addition to the safety functions of the ETS-D5 itself (sensor timeout, temperature drop detection and setpoint monitoring), the heating plate has its own adjustable temperature safety circuit ranging from 50 to 360 °C in accordance with EN IEC 61010-2-010, which switches off the 600-watt heater in the event of a fault, independently of the contact thermometer. Compact housing for flexible laboratory use The RH basic’s brushless EC motor covers a speed range of 100 to 1,500 revolutions per minute. Two rotary/push buttons on the front panel allow independent setpoint adjustment as well as the separate start and stop of the heating and stirring functions. With dimensions of 168 x 217 x 100 millimetres and an IP 22-rated housing, the complete unit can be accommodated even in confined workspaces or within a fume hood. As the stirrer, contact thermometer and stand components are already designed to work together, there is no need to procure individual components separately or check their compatibility. Typical applications As a ready-to-use complete package with a contact thermometer, the RH basic ETS-D5 Solution is particularly suitable for applications with high demands on temperature accuracy: Temperature control accurate to the degree within the medium, ready for immediate use thanks to the supplied ETS-D5 contact thermometer Sample preparation and reagent solutions in chemical analysis Reproducible mixing processes in industrial quality control Temperature-sensitive syntheses and biological samples that must be protected from exceeding the target temperature Ready for use without the need to purchase separate accessories, thanks to the complete package including a stand rod and temperature sensor Technical details Number of stirring points1Max. stirring volume (based on water)15 litresMotor power / motor type7 W, brushless DC motor (EC)Speed range100 to 1,500 rpmControl systemTwo rotary/push buttons (with scale) for setting the target value and starting/stopping heating and stirringHeating power600 WHeating temperature rangeRoom temperature (plus self-heating) up to 310 °CTemperature safety circuit for heating plateAdjustable, 50 to 360 °C, in accordance with EN IEC 61010-2-010Connection for external sensorETS-D5 (electronic contact thermometer)Control accuracy in the medium with ETS-D5±0.5 K (with 500 ml H₂O, 40 mm stir bar, 600 rpm, 50 °C)Base diameter135 mmBase materialAluminium alloyHousing materialChemical-resistant coated laboratory housingDegree of protection according to DIN EN 60529IP 22Dimensions (W x D x H)168 x 217 x 100 mmNet weight2.1 kg (base unit, excluding ETS-D5)Mains connection220 to 230 V, 50/60 Hz, power consumption 620 W Scope of delivery 1 x IKA RH basic magnetic stirrer with heating (aluminium heating plate, Ø 135 mm) 3 x IKAFLON magnetic stir bars (20 mm, 30 mm and 40 mm) 1 x H 102 cover for RH basic 1 x H 102.1 safety handle 1 x screwdriver (for adjusting the safety circuit) 1 x IKA ETS-D5 electronic contact thermometer including PT1000 temperature sensor 1 x stand rod including matching boss head for securing the probe 1 x mains lead 1 x Detailed operating instructions / safety guide Compatible accessories To expand the RH basic ETS-D5 Solution complete package beyond the scope of the items supplied, the following original accessories are also available: Precisely fitting silicone protective covers to protect the instrument surface from liquid splashes IKA Dry attachments made of anodised aluminium for oil-free heating of round-bottom flasks directly on the aluminium hotplate PTFE-coated magnetic stir bars in cylindrical, oval or triangular shapes Manufacturer’s warranty The IKA manufacturer’s warranty applies to the RH basic ETS-D5 Solution complete package: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements and procurement service Our procurement service is available to assist with the application-specific configuration of your laboratory workstations, including additional original accessories, spare parts or bespoke calibration. We are also happy to assist with additional contact thermometers or stand components for further workstations. Further information and contact details can be found on our procurement service page.
IKA C-MAG HS 7 Magnetic Stirrer with Heating, Ceramic Work Surface 180 x 180 mm, 10 Litre, 0003581200
For the daily preparation of buffers, the heating of smaller volumes or simple reflux experiments, a laboratory does not need a full-featured device, but a stirring and heating device that runs reliably and can be operated after a brief introduction. The IKA C-MAG HS 7 (0003581200) combines a 1000-watt ceramic heating plate with a magnetic stirrer for up to 10 litres of water and thus covers a large part of routine laboratory work, without having to pay for the additional functions of a control version. Ceramic work surface for fast, direct heat transfer The 180 x 180 millimetre ceramic work surface transfers the heating power of 1000 watts directly to the vessel and covers a heating temperature range of 50 to 500 °C, set via a simple rotary knob with a setting accuracy of 5 kelvin. A fixed safety circuit switches off the heating at a plate temperature of 550 °C regardless of the selected setpoint temperature, an additional mechanical protection against overheating of the device itself. The setpoint temperature is shown on an LED display, so that the current setting remains legible even from some distance. Stirring up to 10 litres with continuously adjustable speed The stirring drive covers a speed range of 100 to 1500 revolutions per minute, set via a scale from 0 to 6. Stirring bars up to 80 millimetres in length can be used, and the maximum stirring capacity is 10 litres of water. Stirring and heating functions are operated via two separate controls and work independently of each other, so the device can also be used for stirring only, without heating. With a permissible load of 15 kilograms, the work surface also supports larger vessels together with accessories such as reflux condensers or stand material. Expandable with external temperature measurement in the medium Via the connection socket for external temperature sensors according to DIN 12878, a contact thermometer such as the IKA ETS-D5 can be retrofitted if required, in order to measure the temperature directly in the medium instead of only at the plate surface. The sensor is not included in the scope of delivery of the C-MAG HS 7 itself; anyone who needs it from the start will find a version in the C-MAG HS 7 Package that already includes ETS-D5 and stand accessories. Typical applications As a robust entry-level device for stirring and heating, the C-MAG HS 7 is technically suited for: Preparing and homogenising buffer and reagent solutions up to 10 litres Heating and stirring in sample preparation in routine laboratories Simple reflux experiments and dissolution experiments in training and further education Quality control with recurring, uncritical temperature profiles Second device for workstations where no documented medium temperature is required Selection guide within the C-MAG series IKA grades the C-MAG family by the combination of stirring and heating (HS) or heating only (HP), by plate size 4, 7 or 10, and by the level of equipment from the analogue scale to the control version with interfaces. The following table places the C-MAG HS 7 in relation to its closest siblings: ModelStirringStirring capacity (H2O)Heating powerOperationC-MAG HS 7 (this device)yes, 100 to 1,500 rpm10 l1,000 WAnalogue scale, LED setpoint temperatureC-MAG HS 7 controlyes, 50 to 1,500 rpm20 l1,000 WLCD, PT1000/ETS-D5/ETS-D6, RS232, USBC-MAG HS 10yes, 100 to 1,500 rpm15 l1,500 WAnalogue scale, LED setpoint temperature, plate 260 x 260 mmC-MAG HP 7no, heating plate only10 l1,000 WAnalogue scale, LED setpoint temperature Anyone who regularly exceeds 10 litres or switches more often between different volumes is better served by the C-MAG HS 10 or the control version. If only heating is required and stirring is already done elsewhere, the pure heating plate C-MAG HP 7 saves purchase costs. Differences from the nearest C-MAG models The IKA C-MAG HS 7 control offers the same heating power, but a larger stirring capacity of 20 litres, a digital LCD display, automatic reversal of the direction of rotation, timer and interfaces for RS232 and USB, suitable when processes are to be documented or controlled via Labworldsoft. The IKA C-MAG HS 10 retains the simple analogue operation of the HS 7, but brings a larger 260 x 260 millimetre plate and 1500 watts of heating power for larger batches. Anyone who needs the ETS-D5 sensor, stand material and stirring bars directly in a set will find this in the IKA C-MAG HS 7 Package. For smaller batches of up to 5 litres, the IKA C-MAG HS 4 is additionally available in the series. Technical details Number of stirring positions1Max. stirring capacity (H2O)10 lMaximum load15 kgMotor power output1.5 WSpeed range100 to 1,500 rpm, scale 0 to 6Stirring bar length max.80 mmHeating power1,000 WHeating temperature range50 to 500 °C, rotary knob, setting accuracy 5 KSafety circuit fixed550 °CConnection for external temperature sensorETS-D5 (DIN 12878)Work surface materialCeramicWork surface dimensions180 x 180 mmPermissible relative humidity80 %Dimensions (W x H x D)220 x 105 x 335 mmWeight5 kgDegree of protectionIP 21 (DIN EN 60529)Mains connection230 V, 50/60 Hz, 1,020 W (further voltage variants 120 V / 100 V available) Scope of delivery 1 x IKA C-MAG HS 7 magnetic stirrer with heating (0003581200) 1 x IKAFLON 20 magnetic stir bar 1 x IKAFLON 30 magnetic stir bar 1 x IKAFLON 40 magnetic stir bar An external temperature sensor such as the ETS-D5 is not included in the scope of delivery and must be procured separately if required. Use, installation, maintenance and disposal With degree of protection IP 21, the C-MAG HS 7 is protected against vertically falling drip water and designed for operation under the fume hood or on a level, stable laboratory bench at up to 80 % relative humidity. The ceramic surface is chemical-resistant, but should cool before cleaning, since the self-heating of the work surface rises by up to 2 kelvin when stirring for an hour at room temperature and acts in addition to the set heating temperature. The fixed safety circuit at 550 °C protects against unintentional overheating, but does not replace the usual visual inspection of the mains cable and housing before each use. At the end of its service life, the device does not belong in household waste as electrical equipment but in separate waste electrical equipment collection; the manufacturer's WEEE registration number is DE 66784213. Investment logic: stirring capacity, vessel size and when more equipment pays off For most routine batches between 250 millilitres and a few litres, the combination of 10 litres stirring capacity and 1000 watts of heating power of the C-MAG HS 7 is comfortably sufficient, as long as the setpoint temperature at the plate surface is adequate for the application. As soon as a process needs a reliable temperature measured in the medium itself, for example with defined reaction endpoints or sensitive batches, the investment in an external temperature sensor via the ETS-D5 socket is worthwhile, or switching straight to the control version with documentable control. Anyone who regularly works beyond 10 litres should weigh the additional cost of the C-MAG HS 10 or the C-MAG HS 7 control against the effort of constantly working at the capacity limit. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Individual requirements & procurement service For the C-MAG HS 7, suitable original accessories such as the ETS-D5 contact thermometer, stand material, protective covers and further magnetic stirring bars are available on request. Through our procurement service we also support you with spare parts and the compilation of several workstations with uniform accessories. Further information and contact options can be found at our procurement service. Frequently asked questions Can the C-MAG HS 7 also be used for stirring only, without heating?Yes, speed and heating temperature are set via two separate controls and work independently of each other. How accurate is the temperature control?Without an external sensor, the heating temperature at the plate is controlled with a setting accuracy of 5 kelvin. For more accurate control directly in the medium, the ETS-D5 connection socket according to DIN 12878 is available. Which stirring bars are included in the scope of delivery?Three IKAFLON magnetic stirring bars of 20, 30 and 40 millimetres, suitable for bar lengths up to 80 millimetres. What happens if the heating plate gets too hot?A fixed safety circuit switches off the heating at a plate temperature of 550 °C, regardless of the setpoint temperature. How does the C-MAG HS 7 differ from the C-MAG HS 7 control?The C-MAG HS 7 control offers a larger stirring capacity of 20 litres, a digital LCD display and interfaces for RS232 and USB, while the C-MAG HS 7 is operated via a simple analogue scale. How is the device disposed of properly?As electrical equipment, the C-MAG HS 7 falls under the WEEE Directive and belongs at a waste electrical equipment collection point, not in household waste. The manufacturer's registration number is given in the section Use, installation, maintenance and disposal.
IKA RW 20 digital mechanical stirrer, 20 litres, 2 speed ranges, LED, 0003593000
The IKA RW 20 digital stirrer (MPN 0003593000) is the digital further development of the proven RW 20 series and combines a mechanically controlled drive with an LED digital display for the speed. Anyone who regularly has to move stirring volumes of up to 20 litres of water in the laboratory and wants to switch between powerful, low-speed and fast, high-speed stirring will find a robust working tool for daily use here.Mechanical gearbox with two speed rangesThe RW 20 digital has a gearbox with two speed ranges that is switched manually by lever. Range I covers 60 to 500 rpm and delivers a high torque of up to 150 Ncm at the stirring shaft, suitable for highly viscous media of up to 10,000 mPas, pastes or larger volumes. Range II extends from 240 to 2,000 rpm and is suitable for low-viscosity media and fast dispersing. At a mains frequency of 50 hertz, the ranges are 60 to 500 rpm (range I) and 240 to 2,000 rpm (range II), and at 60 hertz correspondingly 72 to 600 rpm and 288 to 2,400 rpm. The maximum torque at the stirring shaft is 150 Ncm at 100 rpm and falls to 24 Ncm at 1,000 rpm; for a short time, an overload of up to 300 Ncm is even permissible at 60 1/min.Precision through LED digital displayWhile power transmission is mechanical, the integrated LED digital display on the front of the unit ensures a speed that can be read at any time and is reproducible. Setting is continuous, the setting accuracy is ±1 rpm, and the deviation of the speed measurement is ±30 rpm. The nominal torque of the drive is 1.5 Nm at a power consumption of 70 watts and an output power of 35 watts. The unit is designed for continuous operation at 100 % duty cycle.Pass-through hollow shaft for flexible height adjustmentA practical detail in everyday laboratory work is the pass-through stirring shaft (hollow shaft) with an internal diameter of 10.5 millimetres. It makes it possible to adjust the height of the stirring tool in the chuck (clamping range 0.5 to 10 millimetres) without having to realign the entire stirrer on the stand. The shaft is adjusted at standstill only. The arm for mounting on the stand has a diameter of 13 millimetres and a length of 160 millimetres.Typical applicationsWith its high torque in the lower speed range and a stirring volume of up to 20 litres, the RW 20 digital is technically suited for:Universal stirring tasks in the laboratory with changing batch sizesHomogenising and dispersing medium-viscosity to higher-viscosity media of up to 10,000 mPasTeaching and industrial laboratories with frequently changing usersRoutine operation in which it is necessary to switch between powerful and fast stirringSelection guide: stirring mechanically or electronicallyWithin the IKA stirrer range, the RW 20 digital described here, with its mechanically controlled drive, stands in contrast to the compact NANOSTAR 7.5 digital with electronic BLDC control. For stirring volumes of up to 20 litres, high torque in the lower speed range and robust continuous operation, the RW 20 digital is suitable. If, on the other hand, no more than 5 litres are moved and a particularly compact, electronically controlled design is required, for example in tight space conditions in a fume hood, the NANOSTAR 7.5 digital is the more space-saving alternative.Differences from larger models of the RW seriesIf a stirring volume of 20 litres is not sufficient for the planned batch, IKA continues the mechanical RW series in larger sizes: the RW 28 digital for stirring volumes of up to 80 litres and the RW 47 digital for stirring volumes of up to 200 litres. For the majority of laboratory applications with batches of up to 20 litres, the RW 20 digital described here remains a suitable choice.Technical detailsMax. stirring volume (H2O)20 lMax. viscosity10,000 mPasSpeed controlmechanicalSpeed range I / II60 to 500 rpm / 240 to 2,000 rpm (at 50 Hz)Speed range I / II (60 Hz)72 to 600 rpm / 288 to 2,400 rpmSpeed setting methodcontinuousSetting accuracy / speed deviation±1 rpm / ±30 rpmSpeed displayLEDMotor power, input / output70 W / 35 WNominal torque1.5 NmMax. torque at the stirring shaft150 Ncm (at 100 rpm), 300 Ncm overload at 60 1/minTorque at the stirring shaft at 1,000 rpm24 NcmMax. power at the stirring shaft26 WPermissible duty cycle100 %Stirring tool mountingChuck, clamping range 0.5 to 10 mmHollow shaft, internal diameter10.5 mm, pass-through at standstillStand mountingArm, Ø 13 mm, length 160 mmIP ratingIP 20 according to DIN EN 60529Dimensions (W x H x D)88 x 294 x 212 mmWeight3.1 kgConnected load220 to 240 V, 50/60 Hz, 72 W (other voltage variants 100 to 115 V available)Scope of delivery1 x RW 20 digital1 x chuck keyA stand and a boss head for mounting as well as a suitable stirring tool are required for operation but are not included in the scope of delivery.Use, installation, maintenance and disposalAccording to degree of protection IP 20, the RW 20 digital is protected against solid foreign objects from 12.5 millimetres, and contact with splashing water must be avoided. The switching lever for the two speed ranges should only be operated with the motor stopped, as should the height adjustment of the pass-through hollow shaft in the chuck. For secure positioning, a sufficiently heavy stand with a stable boss head is recommended, especially when using the high torque in the lower speed range. At the end of its service life, the unit as electrical equipment does not belong in household waste but in the separate collection of waste electrical equipment.WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement serviceOperating the RW 20 digital requires a stand (for example an IKA base plate stand), a suitable boss head and a stirring tool matched to the application, for example propeller, turbine, anchor or dissolver stirrers. A stirring shaft guard or a quick-release chuck can also be added if required. Through our procurement service, we will gladly put together a suitable stirring set-up for you from our range of stirring and mixing technology.Frequently asked questionsIs a stand included in the scope of delivery?No, a stand, boss head and stirring tool are required for operation but are not included in the scope of delivery.What is the maximum stirring volume possible with the RW 20 digital?Up to 20 litres of water, at a maximum permissible viscosity of 10,000 mPas.How do you switch between the two speed ranges?Via a mechanical lever on the front of the unit, which should only be operated with the motor stopped.Can the stirring tool be adjusted in height without moving the stand?Yes, via the pass-through hollow shaft in the chuck, adjustable at standstill.Is there an electronically controlled model as an alternative?For more compact applications of up to 5 litres, the electronically controlled NANOSTAR 7.5 digital is suitable.What happens if the stirring shaft is overloaded?For a short time, an overload of up to 300 Ncm at the stirring shaft is permissible at 60 1/min; beyond that, the load should be reduced.
IKA RT 15 Multi-position Magnetic Stirrer with Heating, 15 Stirring Positions in a 90 mm Grid, 0003692600
Anyone who regularly stirs a whole series of identical samples in parallel, for example, in quality control, in series of experiments or in laboratory classrooms with many groups working simultaneously, will quickly reach the limits of space and cost when using individual magnetic stirrers. The IKA RT 15 (0003692600) accommodates 15 heated stirring positions in a 90-millimetre grid, driven by a single coil drive instead of 15 individual motors, with a speed deviation of 0 % between the positions. Shared coil drive instead of individual motors Unlike 15 separate magnetic stirrers, the RT 15 operates using silent coil drive technology that powers all 15 stirring positions simultaneously. According to the data sheet, the speed variation between the individual positions is 0 %; all positions therefore run synchronously at the same set speed of 0 to 1,000 revolutions per minute, adjustable in increments of 10 revolutions per minute. 15 stirring positions in a uniform 90-millimetre grid The base, made from an aluminium alloy, measures 270 x 495 millimetres and is designed to accommodate 15 standard vessels in a 90-millimetre grid. Up to 0.4 l of water is provided per stirring position; in total, the unit can carry a maximum load of 15 kilograms. Stir bars measuring 25 to 30 millimetres in length are suitable for the individual positions. Heating function with a total power output of 580 watts The integrated heating system covers a temperature range from room temperature to 120 °C, with a total heating power of 580 watts for all 15 positions combined. The safety limit can be set between 50 and 150 °C. A silicone mat supplied with the unit protects the surface on which it is placed and, according to the manufacturer, ensures optimised temperature distribution across the positions. Silent drive with no mechanical wear The coil drive technology generates the rotating field for all 15 positions electronically, without any mechanically moving drive elements such as belts or gears at each stirring point. This not only reduces noise levels during continuous operation but also minimises maintenance requirements compared to a bench comprising 15 individual, mechanically driven stirrers, where each motor has its own wear parts. Typical applications With synchronously operating multiple stations, the RT 15 is suitable for: Parallel batch tests with identical stirring and heating parameters across 15 batches Quality control with recurring sample series in routine laboratories Training laboratories where several workstations are required to operate simultaneously at the same speed Solution preparation for sample series of up to 0.4 l per station A space-saving alternative to several individual heated magnetic stirrers Selection guide: single-station or multi-station stirrer Anyone who regularly stirs more than three to four identical batches in parallel should weigh up the cost of a multi-station stirrer against that of several individual units: ModelStirring positionsHeatingStirring capacity per stationPower supplyRT 15 (this unit)15Yes, 580 W0.4 l230 V mains voltageRT 1010Yes, 375 W0.4 l230 V mains voltageRO 1010No0.4 l24 V, external power supply If heating is required in addition to stirring, the RT series is suitable. If stirring alone without heating is sufficient, the RO series with its 24-volt power supply saves on initial purchase costs and ongoing electricity costs. For smaller series of up to 10 samples, the RT 10 is also available within the RT series, which requires fewer positions whilst maintaining the same grid layout. Differences between the RT 10 and RO 10 The most significant difference within the multi-station series lies between the RT and RO models: The IKA RT 10 shares the same heating function and 230-volt mains voltage as the RT 15, but offers only 10 stirring positions instead of 15, with a correspondingly lower heating power of 375 watts instead of 580 watts. The IKA RO 10 does not have a heating function at all and is instead powered by an external 24-volt power supply; this is the key factor in the purchasing decision: those who only need to stir, but do not need to heat, are better served by the RO series. Technical details Number of stirring positions15Stirring point spacing (grid)90 mmSpeed variation between positions (according to data sheet)0 %Max. stirring volume per point (H2O)0.4 lMaximum load15 kgSpeed range0 to 1,000 rpm, adjustable in 10-rpm incrementsStir bar length25 to 30 mmHeating power580 W (total)Heating temperature rangeRoom temperature to 120 °C, LED displayAdjustable safety limit50 to 150 °CFootprint, material / dimensionsAluminium alloy, 270 x 495 mmHeating rate (1 l H2O in H1500)3 K/minDimensions (W x H x D)280 x 60 x 610 mmWeight10.5 kgIP ratingIP 40 (DIN EN 60529)Mains connection230 V, 50/60 Hz, 600 W (other voltage options: 115 V / 100 V available) Scope of delivery 1 x IKA RT 15 multi-position magnetic stirrer with heating (0003692600) 1 x silicone mat for protection and optimised temperature distribution The scope of delivery does not include stir bars for the individual positions, and they must be purchased separately if required. Use, installation, maintenance and disposal With an IP 40 protection rating, the RT 15 is protected against solid foreign objects from 1 millimetre in size; however, it is not splash-proof. Accordingly, the unit should be operated on a dry, level surface and not in the immediate vicinity of sources of splashing water. The supplied silicone mat should be checked regularly for damage and cleaned if necessary, as it protects against both mechanical contact and uneven heat distribution. Before moving the device, which, at 10.5 kilograms, is comparatively heavy, it should be allowed to cool down and disconnected from the mains. At the end of its service life, as an electrical appliance, the device must not be disposed of with household waste but must be placed in the separate collection scheme for waste electrical and electronic equipment; the manufacturer’s WEEE registration number is DE 66784213. Investment logic: Multi-position stirrer versus multiple individual units For series work involving many small, similar samples of up to 0.4 l per position, the RT 15 is generally more cost-effective than 15 individual heated magnetic stirrers, both in terms of purchase cost and in terms of space required on the laboratory bench and cabling requirements, as only a single mains cable is required instead of 15 individual connections. The 0 % speed deviation between stations also ensures comparable results across all positions, an advantage over multiple individual units with potentially slightly differing calibration. If, on the other hand, only a few samples need to be processed in parallel or larger stirring volumes per vessel are required, individual C-MAG or RCT/RET units with a higher stirring volume per position are the more suitable choice. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Individual requirements and procurement service Suitable original accessories are available for the RT 15 as required, such as magnetic stir bars in various shapes, beaker lids, a stir bar remover and power cables for different country variants (EU, USA, UK, Switzerland). Through our procurement service, we also assist you with spare parts and the uniform equipping of several series workstations. Further information and contact details can be found at our procurement service. Frequently Asked Questions Do all 15 stirring stations really operate at the same speed?Yes, according to the data sheet, the speed variation between the stations is 0 %, made possible by the shared coil drive rather than individual motors. Can each stirring station be heated individually?According to the data sheet, the heating power of 580 watts is specified for all stations combined; all stations share the same setpoint temperature. How does the RT 15 differ from the RO 10?The RT 15 heats and operates on a 230-volt mains supply, whilst the RO 10 does not have a heating function and is powered by an external 24-volt power supply; however, it offers only 10 stirring positions instead of 15. What is the maximum size of a stirring vessel per position?According to the data sheet, up to 0.4 l of water per stirring position is permitted; the spacing between positions is 90 millimetres, which is sufficient for standard test tubes and small beakers. Are stir bars included in the scope of delivery?No, the RT 15 is supplied without stir bars for the 15 stirring positions; suitable PTFE-coated magnetic stir bars in various shapes are available separately from the IKA range of accessories. Is the RT 15 suitable for continuous operation with multiple parallel batches?The silent coil drive technology, which does not use individual mechanical motors, is designed for long-term, low-maintenance continuous operation. How does the RT 15 differ from the RT 10?The RT 15 offers 5 additional stirring positions and correspondingly higher heating power (580 instead of 375 watts), whilst otherwise featuring identical operating logic and the same 90-millimetre grid. How should the RT 15 be disposed of correctly?As an electrical appliance, it should be taken to a waste electrical and electronic equipment (WEEE) collection point rather than disposed of with household waste; the manufacturer’s WEEE registration number is listed in the section on ‘Use, installation, maintenance and disposal’.
IKA MIXSTER SET 1 Universal Magnetic Stirrer (Twister), 0020027010
Innovative universal mixing drive The IKA MIXSTER (known as the Twister) is more than just a magnetic stirrer. It is a modular mixing system that adapts to your requirements. With its ultra-slim design and high-quality glass surface, it is a real eye-catcher in the laboratory. The powerful drive handles volumes of up to 5 litres at speeds of up to 3,000 rpm and effortlessly copes with viscosities of up to 500 mPas. Thanks to the intuitive beaker recognition, the stirring process starts automatically as soon as a vessel is placed on the unit. Modularly expandable to a multi-position system Its expandability is unique: you can use the MIXSTER as a single unit or link up to 30 units to form a large multi-position magnetic stirrer. The units can be easily slotted together and communicate using the leader-follower principle. Furthermore, with optional accessories (such as the MIX.VX attachment), the drive can be transformed into a vortex shaker or orbital shaker in no time at all. This makes it a universal ‘all-in-one’ tool for any laboratory bench. Smart features & robustness The innovative 360° LED glass display does away with alphanumeric readouts and intuitively visualises changes in speed or viscosity graphically. For samples that are difficult to mix, the integrated reverse function (automatic direction of rotation reversal) ensures significantly better mixing. With its high IP 66 protection rating, the device is dust-tight and protected against powerful water jets. It can be easily cleaned under the tap and is even suitable for use in incubators up to 40 °C. Technical details Number of stirring points: 1 (expandable to up to 30) Max. stirring volume (H₂O): 5 litres Speed range: 100–3,000 rpm Setting accuracy: 10 rpm Footprint: Glass, 124 x 124 mm Degree of protection according to DIN EN 60529: IP 66 Dimensions (W x H x D): 135 x 24 x 135 mm Weight: 0.6 kg Permissible ambient temperature range: 5–40 °C Functions: Beaker glass detection, reverse function, viscosity trend measurement Voltage: 100–240 V (power supply unit for up to 2 devices) Scope of delivery IKA MIXSTER magnetic stirrer (drive unit) Mains power supply unit (with adaptors for EU, UK, CH, US, AUS) Operating instructions Note: Magnetic stirring bars and attachments (vortex/multi-point) are not included. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements and procurement service Would you like to expand your MIXSTER system, or do you require the MIX.VX shaking attachment or the MIX.IX multi-position attachment? We can put together your modular stirring system. Please contact our procurement service for accessories and expansion units.
IKA dispersing tool S 18 N - 10 G, Ø 10 mm, L004639
The IKA S 18 N - 10 G dispersing tool is a tool for rotor-stator dispersion in the millilitre range. Designed for use with the laboratory dispersers of the ULTRA-TURRAX T 18 series, this dispersing shaft enables sample preparation of biological, pharmaceutical and chemical media. In applications such as the disruption of tissue cells, the emulsification of cosmetic formulations or the suspension of poorly soluble active ingredients in laboratory vessels, the precise fluid-dynamic geometry of this tool supports the homogenisation of the sample. Rotor-stator kinetics and process shear dynamics The mechanical operating principle is based on the tried-and-tested rotor-stator system, in which the inner rotor moves within the fixed stator at speeds of up to 25,000 revolutions per minute. Due to the small radial gap between the rotor and stator, the sample medium is drawn axially into the dispersion head and then forced radially through the slots of the generator. The combination of high shear forces, turbulent shear fields and transient cavitation effects enables particle and droplet size reduction down to the micrometre range. The 10 G generator is characterised by an optimised tooth geometry, which enables primary fragmentation of fibrous, tough or cellular sample structures across an extended volume range. Materials and sterilisation The wetted parts are stainless steel AISI 316L (1.4404) and PTFE. According to IKA, this material composition offers high chemical resistance to acids, alkalis and organic solvents. For molecular biological and microbiological applications, the tool’s sterilisability is important: the dispersing tool is autoclavable at 121 °C and can be hot-air sterilised up to 180 °C, so that the tool can be sterilised before each use. Ergonomic design features and working area The mechanical design features a stator diameter of 10 millimetres and a shaft length of 108 millimetres, enabling operation in various reaction vessels and laboratory glassware. The working range covers a sample volume of 1 to 100 millilitres, allowing flexible sample series to be processed efficiently whilst minimising material wastage. Technical details Drive & dispersion technology Tool type: Rotor-stator dispersing tool Generator designation: 10 G Operating range (volume range H₂O): 1–100 ml Max. permissible speed: 25,000 rpm Gap width (radial gap): 0.25 mm Design & dimensions Stator diameter: 10 mm Rotor diameter: 7.5 mm Shaft length: 108 mm Minimum immersion depth: 20 mm Max. immersion depth: 85 mm Material (in contact with sample): Stainless steel (AISI 316L / 1.4404), PTFE Resistance and sterilisation Sterilisation methods: Autoclavable (121 °C), hot air (up to 180 °C) Solvent resistance: Yes Acid/alkali resistance: Yes Scope of delivery 1 x IKA S 18 N - 10 G dispersing tool Safety and cleaning instructions are enclosed Important note: A suitable drive unit from the IKA ULTRA-TURRAX T 18 series and stand accessories are not included in the standard scope of delivery and must be ordered separately. Individual requirements & accessories For the IKA S 18 N - 10 G dispersing tool to operate as intended, a drive unit from the IKA ULTRA-TURRAX T 18 series (e.g. T 18 digital) is required. To avoid abrasive wear of the internal PTFE bearings during dry running, the tool must always be immersed sufficiently deep into the sample medium (min. 20 mm) before switching on. We can source PTFE replacement seals and maintenance kits on request. Please use our procurement service to select your laboratory peripherals.
IKA C-MAG HS 10 Magnetic Stirrer with Heating, Ceramic Work Surface 260 x 260 mm, 15 Litre, 0003581400
Larger beakers, several flasks side by side or batches above 10 litres need a work surface that also supports this load across its area, not just a powerful heater. For this, the IKA C-MAG HS 10 (0003581400) comes with a 260 x 260 millimetre ceramic plate, considerably larger than that of the C-MAG HS 7, combined with 1500 watts of heating power and a stirring capacity of up to 15 litres of water. Large ceramic work surface for greater vessel variety With 260 x 260 millimetres, the ceramic plate offers considerably more room than the 180 x 180 millimetre surface of the C-MAG HS 7, for example for wide crystallising dishes, large round-bottom flasks or several smaller vessels at the same time. The heating power of 1500 watts covers a temperature range of 50 to 500 °C, set via a rotary knob with an accuracy of 5 kelvin and shown on an LED display. A fixed safety circuit limits the plate temperature to a maximum of 550 °C regardless of the setpoint temperature. Stirring up to 15 litres, load up to 20 kilograms As with the C-MAG HS 7, the stirring drive covers a speed range of 100 to 1500 revolutions per minute, set via a six-step scale, and stirring bars up to 80 millimetres in length can be used. The higher permissible load of 20 kilograms makes it possible to place additional stand material, reflux condensers or double-jacketed reaction vessels on the plate alongside the stirred material without exhausting the limit values. Expandable with external temperature measurement Via the connection socket according to DIN 12878, an ETS-D5 contact thermometer can be retrofitted if required, in order to measure the temperature directly in the medium instead of only at the plate surface. The sensor itself is not part of the scope of delivery of the C-MAG HS 10 and must be procured separately if required. Higher heating power for faster heating times With 1500 instead of 1000 watts, the C-MAG HS 10 delivers more heating power than the C-MAG HS 7, distributed over a larger area, which reduces the time to reach the setpoint temperature at a comparable fill level. Especially with larger quantities of water or several vessels heated at the same time, the difference in power is noticeable in everyday laboratory work, without anything having to be changed in the operating logic compared with the smaller model. Typical applications With a large work surface and increased heating power, the C-MAG HS 10 is technically suited for: Preparing and heating larger volumes up to 15 litres Stirring or heating several smaller vessels on one plate at the same time Batches with larger crystallising dishes or wide round-bottom flasks Routine processes in which fast heating through higher heating power saves time Laboratory workstations with changing vessel size without changing the base device Selection guide within the C-MAG series Within the C-MAG family, the HS 10 marks the largest work surface and highest heating power among the models with analogue operation: ModelPlate sizeStirring capacity (H2O)Heating powerOperationC-MAG HS 10 (this device)260 x 260 mm15 l1,500 WAnalogue scale, LED setpoint temperatureC-MAG HS 7180 x 180 mm10 l1,000 WAnalogue scale, LED setpoint temperatureC-MAG HS 7 control180 x 180 mm20 l1,000 WLCD, PT1000/ETS-D5/ETS-D6, RS232, USBC-MAG HP 7180 x 180 mm10 l (heating only)1,000 WAnalogue scale, LED setpoint temperature Anyone who needs documented temperature control in the medium or interfaces is better served by the C-MAG HS 7 control, even if its plate area is smaller. Anyone who, on the other hand, is mainly looking for space on the work surface and heating power, without needing digital functions, will find the largest area of the series in the HS 10. Differences from the nearest C-MAG models The IKA C-MAG HS 7 covers most standard batches up to 10 litres with the smaller 180 x 180 millimetre plate and 1000 watts of heating power and is the more compact alternative. The IKA C-MAG HS 7 control brings, with a smaller plate, a higher stirring capacity of 20 litres as well as a digital display and interfaces. Anyone who only needs to heat but not stir will find, with the IKA C-MAG HP 7 a pure heating plate in the same form factor as the HS 7. Technical details Number of stirring positions1Max. stirring capacity (H2O)15 lMaximum load20 kgMotor power output1.5 WSpeed range100 to 1,500 rpm, scale 0 to 6Stirring bar length max.80 mmHeating power1,500 WHeating temperature range50 to 500 °C, rotary knob, setting accuracy 5 KSafety circuit fixed550 °CConnection for external temperature sensorETS-D5 (DIN 12878)Work surface materialCeramicWork surface dimensions260 x 260 mmPermissible relative humidity80 %Dimensions (W x H x D)300 x 105 x 415 mmWeight6 kgDegree of protectionIP 21 (DIN EN 60529)Mains connection230 V, 50/60 Hz, 1,520 W (further voltage variants 120 V / 100 V available) Scope of delivery 1 x IKA C-MAG HS 10 magnetic stirrer with heating (0003581400) 1 x IKAFLON 20 magnetic stir bar 1 x IKAFLON 30 magnetic stir bar 1 x IKAFLON 40 magnetic stir bar An external temperature sensor such as the ETS-D5 is not included in the scope of delivery. Use, installation, maintenance and disposal With degree of protection IP 21, the C-MAG HS 10 is protected against vertically falling drip water and designed for operation in the fume hood or on a stable, level laboratory bench at up to 80 % relative humidity. Because of the larger work surface and higher heating power, sufficient distance to flammable materials, solvent bottles and adjacent devices should be planned when setting up, particularly with continuous operation with several vessels on the plate. The ceramic surface is chemical-resistant, but the device should cool down and be disconnected from the mains before cleaning. The fixed safety circuit at 550 °C additionally protects against overheating. At the end of its service life, the device does not belong in household waste as electrical equipment but in separate waste electrical equipment collection; the manufacturer's WEEE registration number is DE 66784213. Investment logic: when the larger work surface pays off Anyone who regularly works with vessels that become tight on a 180 x 180 millimetre plate, or who wants to heat several smaller vessels at the same time, gains noticeable flexibility with the 260 x 260 millimetre plate of the HS 10, without having to place a second, smaller device next to it. For standard batches up to 10 litres, where vessel size is irrelevant, the more compact and somewhat cheaper C-MAG HS 7 is usually sufficient. If a documented temperature measured in the medium is also required, the investment should go into the control version with the smaller plate rather than into the pure area enlargement of the HS 10. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Individual requirements & procurement service For the C-MAG HS 10, suitable original accessories such as the ETS-D5 contact thermometer, stand material, protective covers, oil bath attachments and further magnetic stirring bars are available on request. Through our procurement service we also support you with spare parts, calibrations and the compilation of several workstations with uniform accessories. Further information and contact options can be found at our procurement service. Frequently asked questions How much larger is the work surface compared with the C-MAG HS 7?The plate of the HS 10 measures 260 x 260 millimetres compared with 180 x 180 millimetres for the HS 7, so considerably larger vessels or several vessels fit on the surface at the same time. Can the C-MAG HS 10 also be used for stirring only, without heating?Yes, speed and heating temperature are set via two separate controls and work independently of each other. What is the maximum load on the work surface?20 kilograms, which includes additional stand material or accessories on the plate and is thus above the 15 kilograms of the smaller C-MAG HS 7. Is external temperature measurement in the medium possible?Via the connection socket according to DIN 12878, an ETS-D5 contact thermometer can be retrofitted, which, however, must be procured separately. Which stirring bars are included in the scope of delivery?Three IKAFLON magnetic stirring bars of 20, 30 and 40 millimetres, suitable for bar lengths up to 80 millimetres. How is the C-MAG HS 10 disposed of properly?As electrical equipment, it belongs at a waste electrical equipment collection point instead of in household waste, and the manufacturer's WEEE registration number is given in the section Use, installation, maintenance and disposal.
IKA topolino Mini Magnetic Stirrer without Heating, up to 250 ml, Plastic Base, 0003368000
For the rapid homogenisation of a small sample, a series of dilutions or the dissolution of a tablet in a few millilitres of buffer, there is no need for a full-size magnetic stirrer with a heating plate, which takes up unnecessary space on the laboratory bench. The IKA topolino (0003368000) is a compact magnetic stirrer with a round plastic base measuring 80 millimetres in diameter, a maximum stirring volume of 250 millilitres and a weight of just 0.484 kilograms. Compact format Measuring 95 x 37 x 115 millimetres and weighing 0.484 kilograms, the topolino is designed for use in the most confined spaces, such as right next to a microscope or on an already cluttered workbench. The plastic (PP) base has a diameter of 80 millimetres and is designed for vessels with a stirring volume of up to 250 millilitres and a maximum load of 0.5 kilograms. Continuously variable speed from 500 to 1,800 rpm The stirring drive, with an output power of 0.8 watts, covers a continuously adjustable speed range from 500 to 1,800 revolutions per minute, which is sufficiently rated for small volumes of low-viscosity liquids. Stir bars up to 30 millimetres in length can be used, adapted to the compact vessel size for which the topolino is designed. No heating function, but compact Unlike the C-MAG and RCT/RET series, the topolino deliberately does not include a heating function. This keeps the design and weight to a minimum and makes the unit a pure stirring solution for applications where temperature control is not required. Simple operation without a digital display The topolino deliberately does not feature a display and is operated via a simple control knob that allows the speed to be adjusted continuously between 500 and 1,800 revolutions per minute. For small volumes, this straightforward operating logic is usually sufficient, as the exact speed rarely needs to be reproduced to the nearest second with such small sample quantities, unlike in larger processes where documentation is required. Typical applications As a small magnetic stirrer, the topolino is technically suitable for: Homogenising and dissolving small sample volumes of up to 250 millilitres Serial dilutions and sample preparation where space is limited Use in confined workspaces Portable use thanks to its low weight of 0.484 kilograms As a secondary unit for occasional stirring alongside a larger main unit Selection guide: small volume or larger stirring volume The required stirring volume is the key criterion when selecting the appropriate magnetic stirrer: ModelStirring volume (H2O)HeatingWeightFootprinttopolino (this appliance)0.25 lNo0.484 kgPlastic, Ø 80 mmC-MAG HS 710 l yes, 1,000 W5 kgCeramic, 180 x 180 mmIKA Plate (RCT digital)20 lYes, 600 W2.4 kgAluminium, Ø 135 mm If volumes ranging from a few millilitres up to 250 millilitres are required without the need for heating, the topolino is a compact and lightweight solution. As soon as larger volumes or a heating function are required, a C-MAG or RCT/RET model is essential; however, these models involve a significant increase in space requirements, weight and purchase price. Differences compared to larger IKA magnetic stirrers With a stirring capacity of 10 l and integrated heating, the IKA C-MAG HS 7 handles significantly larger batches, with correspondingly larger dimensions of 220 x 105 x 335 millimetres and a weight of 5 kilograms, compared to the topolino’s 0.484 kilograms. Anyone looking for a portable, battery-powered alternative to the topolino will find the topolino mobil, a battery-powered version that does not require a mains connection. For applications requiring heating with a similarly small volume, the IKA Plate (RCT digital) is also available in the RCT series, albeit with a significantly higher maximum mixing capacity and a correspondingly larger design. Technical details Number of stirring points1Max. stirring volume (H2O)0.25 lMaximum load0.5 kgMotor power output0.8 WSpeed range500 to 1,800 rpm, continuously adjustableMax. stir bar length30 mmBase materialPlastic (PP)Base dimensionsØ 80 mmDimensions (W x H x D)95 x 37 x 115 mmWeight0.484 kgIP ratingIP 21 (DIN EN 60529)Mains connection100 to 240 V, 50/60 Hz, power consumption 10 W Scope of delivery 1 x IKA topolino mini magnetic stirrer (0003368000) Scope of delivery according to IKA: topolino magnetic stirrer. Stir bars are not included; if required, they are available separately. The magnetic stirrer is operated via a plug-in power supply (100 to 240 V). Use, installation, maintenance and disposal With an IP 21 protection rating, the topolino is protected against vertically falling dripping water and is designed for operation on a stable, level surface, such as directly next to a microscope or on a mobile trolley for use at different workstations. Due to its low weight of 0.484 kilograms, care should be taken to ensure it is securely positioned so that the device does not shift due to vibration at higher speeds. The plastic base is easy to clean; chemical resistance to aggressive solvents should be checked on a case-by-case basis. At the end of its service life, as an electrical appliance, the device must not be disposed of with household waste but must be placed in the separate collection scheme for waste electrical and electronic equipment; the manufacturer’s WEEE registration number is DE 66784213. When the topolino is sufficient For sample volumes of up to 250 millilitres without the need for heating, the topolino is a cost-effective and compact solution, both in terms of purchase price and bench space requirements, particularly when several workstations are to be equipped simultaneously with a small, affordable stirrer. As soon as larger volumes need to be stirred on a regular basis or temperature control is required, it makes more sense to invest in a C-MAG or RCT/RET model with a correspondingly larger stirring capacity and heating function, as the topolino is not designed for these applications, either in terms of footprint or motor power. For workstations with varying requirements, a topolino may be worth considering as a secondary unit for small intermediate steps, in addition to a larger main unit. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Individual requirements and procurement service Where required, suitable original accessories are available for the topolino, such as magnetic stir bars in various shapes, beaker lids and a stir bar remover. Through our procurement service, we also assist you with spare parts and the configuration of multiple workstations with standardised accessories. Further information and contact details can be found at our procurement service. Frequently Asked Questions Can the topolino also heat?No, the topolino is a magnetic stirrer only, without a heating function. What voltage options does the topolino support?According to the data sheet, the device covers a wide input range of 100 to 240 volts at 50 or 60 hertz and can therefore be operated in different countries without a separate voltage converter. What is the maximum volume that can be stirred?According to the manufacturer’s specifications, up to 250 millilitres of water, corresponding to a maximum load of 0.5 kilograms. Are magnetic stir bars included in the scope of delivery?No, according to IKA, magnetic stir bars are not included in the scope of delivery. If required, they are available separately. How does the topolino compare in size to other IKA magnetic stirrers?Measuring 95 x 37 x 115 millimetres and weighing 0.484 kilograms, it is a compact and light model in the IKA magnetic stirrer range. Is there a battery-powered alternative?Yes, with the topolino mobil, IKA offers a battery-powered version that does not require a fixed mains connection. Does the topolino fit under a microscope?With a footprint of just 95 x 115 millimetres and a height of 37 millimetres, the topolino can be accommodated in very confined spaces, such as right next to other small appliances or measuring instruments. Is the motor power sufficient for more viscous media?With an output power of 0.8 watts, the drive is designed for low-viscosity, aqueous media in small volumes; for more viscous media, the more powerful C-MAG or RCT/RET models, with significantly higher motor power, are better suited. Is the topolino suitable for continuous operation?Its simple, robust design without a digital display is intended for straightforward routine operation; details on the permissible duty cycle are available on request. How should the topolino be disposed of correctly?As an electrical appliance, it should be taken to a waste electrical and electronic equipment (WEEE) collection point rather than disposed of with household waste; the manufacturer’s WEEE registration number is listed in the section on ‘Use, installation, maintenance and disposal’.
IKA NANOSTAR 7.5 digital stirrer, overhead stirrer, 5 L, 0025004356
In microchemical synthesis, during parallel sample preparation or when working under very cramped fume hoods, the space required by laboratory instruments is often the limiting factor. The IKA NANOSTAR 7.5 digital stirrer (MPN 0025004356) is a compact overhead stirrer for media with a volume of up to 5 litres (based on the viscosity of water), which it can homogenise, disperse or dissolve.Constant torque thanks to a brushless DC motorAt the heart of the NANOSTAR 7.5 digital is a brushless DC motor (BLDC technology), which operates with low wear and delivers a constant torque of 7.5 Ncm at the stirring shaft. If the viscosity of the medium changes during stirring, for example, due to an increase in viscosity during polymerisation or temperature fluctuations, the integrated electronics automatically adjust the power consumption. The set speed, within the range of 50 to 2,000 revolutions per minute, thus remains constant, which supports reproducible results. The maximum viscosity of the medium may be up to 4,000 mPas.Hollow shaft and chemical-resistant glass frontWhen changing mixing vessels or dealing with varying fill levels, the stirring tool often needs to be adjusted in height. The NANOSTAR 7.5 digital features a continuous hollow shaft with an internal diameter of 8.5 millimetres, through which the shaft of the stirring tool can be easily pushed when the unit is at a standstill, without the need to cut the stirring shafts to length. The unit is operated via a rotary knob, and an LED glass display shows the speed. The seamless real-glass front is resistant to organic solvents, acid vapours and alkalis, and can therefore be thoroughly cleaned and decontaminated.IP 54 rating and digital connection via USBThe housing of the NANOSTAR 7.5 digital is protected against dust and splashing water from all directions according to degree of protection IP 54. An electronic overload and overtemperature protection system automatically switches off the motor if the stirring element becomes blocked. The micro-USB port on the rear can be used to install firmware updates and connect the device to the Labworldsoft laboratory equipment software to document torque trends.Typical applicationsWith its compact design and constantly regulated torque, the NANOSTAR 7.5 digital is suitable for:Microchemical syntheses and reactions where space is limited within a fume hoodParallel sample preparation at several workstations simultaneouslyHomogenisation and dispersion of small volumes up to 5 litresStirring processes involving changing viscosity, such as during polymerisationSelection guide: mechanical or electronic stirringWithin the IKA range of stirrers, the NANOSTAR 7.5 digital described here, with its electronically controlled BLDC drive, is contrasted by the mechanically controlled RW 20 digital. For compact volumes up to 5 litres and confined spaces, the NANOSTAR 7.5 digital described here is suitable. If, on the other hand, volumes of up to 20 litres need to be stirred or high torque is required in the lower speed range, the RW 20 digital with its mechanical gearbox is the more suitable alternative.Distinction from larger electronic overhead stirrersIf a larger stirring volume or higher torque is required than the NANOSTAR 7.5 digital offers with its 5 litres and 7.5 Ncm, IKA offers further electronically controlled overhead stirrers in larger sizes with the Ministar and Microstar series, which can be viewed in our range of stirring and mixing technology. For compact applications with limited space, however, the NANOSTAR 7.5 digital described here remains a particularly space-saving option in IKA’s range of electronic stirrers.Technical detailsMax. stirring volume (H₂O)5 lMax. viscosity4,000 mPasMotor typebrushless DC motor (BLDC)Speed range0/50 to 2,000 rpmSpeed adjustmentRotary knobSetting accuracy for speed±1 rpmSpeed measurement deviation±1 % (n > 300 rpm) / ±3 rpm (n < 300 rpm)Speed displayLED glass displayMotor power, input / output32 W / 22 WRated torque0.075 NmMax. torque at the stirring shaft7.5 NcmMax. power at the stirring shaft15.7 WPermissible duty cycle100 %Agitator tool mountingChuck, clamping range 0.5 to 8.2 mmHollow shaft, internal diameter8.5 mm, can be inserted whilst the unit is stationaryMounting on standExtension arm, Ø 13 mm, length 160 mmHousing materialCoated cast aluminium / thermoplasticInterfaceUSB (Micro-USB)Standby power consumption0.3 WProtection ratingIP 54 in accordance with DIN EN 60529Dimensions (W x H x D)53 x 147 x 130 mmWeight0.8 kgConnected load100 to 240 V, 50/60 Hz, 32 WScope of delivery1 x NANOSTAR 7.5 digital (drive unit)1 x R 300 stirrer shaft guard2 x fixing screws for R 3001 x chuck keyA suitable stirring tool, a boss head and a stand are required for operation but are not included in the scope of delivery.Use, installation, maintenance and disposalThanks to its IP 54 rating, the NANOSTAR 7.5 digital can withstand splash water and dust in a normal laboratory environment. The seamless glass front can be decontaminated using standard solvents, acids or alkalis without cleaning agents penetrating the joints or buttons. To ensure secure, vibration-free mounting, the motor should be fitted to a sufficiently stable stand arm. At the end of its service life, as an electrical appliance, the device must not be disposed of with household waste but must be placed in the separate collection scheme for waste electrical and electronic equipment.WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements and procurement serviceThe NANOSTAR 7.5 digital is a drive motor only. To achieve suitable mixing in terms of fluid dynamics within a beaker or reaction vessel, a stirring device tailored to the sample is required, such as a propeller, centrifugal or anchor stirrer from the IKA R-series. For secure attachment to the stand arm, we also recommend a sturdy plate stand with a suitable boss head. Through our procurement service, we would be happy to put together a suitable stirring setup for you from our range of stirring and mixing equipment.Frequently Asked QuestionsIs a stirring tool included in the scope of delivery?No, a stirring tool, boss head and stand are required for operation but are not included in the scope of delivery.What is the maximum stirring volume possible with the NANOSTAR 7.5 digital?Up to 5 litres of water, with a maximum permissible viscosity of 4,000 mPas.How is the speed kept constant when the viscosity changes?The integrated electronics of the brushless DC motor automatically adjust the power consumption.Can the stirring tool be fitted without shortening the shaft?Yes, via the push-through hollow shaft with an 8.5-millimetre internal diameter, which can be adjusted whilst the unit is stationary.Is the unit suitable for use with solvents?The seamless glass front is resistant to organic solvents, acid vapours and alkalis.Is there a mechanically controlled model for larger mixing volumes?For mixing volumes of up to 20 litres, the mechanically controlled RW 20 digital is a suitable option.