Skip to main content Skip to search Skip to main navigation

Bandelin SONOREX GV 10 handle adjuster, 2 pieces, for SONOREX ultrasonic baths

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Bandelin SONOREX GV 10 handle adjuster, 2 pieces, for SONOREX ultrasonic baths"

The GV 10 handle adjuster is available for the K 10/B, K 14/B and K 28/C insert baskets. According to Bandelin, it is easy to retrofit and adjusts the immersion depth of the baskets continuously. Sample containers can thus be sonicated at the optimum immersion depth. The scope of delivery includes 2 pieces. The assignment applies to 20 models of the SUPER RK, DIGITEC DT and smart ST series.

Bandelin also recommends the GV 10 for the ZF 10 and ZF 28 laboratory flask holders, so that laboratory flasks are not flooded at the optimum fill level. The baskets are not included in the scope of delivery.

Typical applications

Typical uses in the compatible units:

  • Sample preparation for analysis in the DT 510 H
  • Cleaning of several beakers or larger laboratory glassware items simultaneously in the RK 514 BH
  • Cleaning taller objects thanks to the 200 mm tank depth in the DT 514 BH

Suitable for

ModelBandelin device no.Tank volume (l)
DT 1028325528.0
DT 1028 CH326645.0
DT 1028 H323128.0
DT 51032459.7
DT 510 H32069.7
DT 512 H322613.0
DT 514325013.5
DT 514 BH321618.7
DT 514 H321113.5
RK 102832228.0
RK 1028 C66145.0
RK 1028 CH14345.0
RK 1028 H32428.0
RK 5103279.7
RK 510 H3219.7
RK 512 H79513.0
RK 51427713.5
RK 514 BH26318.7
RK 514 H20713.5
ST 514 BH710718.7

Technical details

Compatible basketsK 10/B, K 14/B, K 28/C
Scope of delivery2 pieces

Scope of delivery

  • 2 SONOREX GV 10 handle adjusters

Individual requirements & procurement service

For the insert baskets, the laboratory flask holders and questions about compatibility, our procurement service accepts enquiries.

Skip product gallery

Fits

Discount
Topseller
Bandelin SONOREX SUPER RK 1028 CH Ultraschallbad mit Heizung, 1.4404-Wanne, 45 Liter, 35 kHz, 143, Produktansicht Bandelin
Bandelin SONOREX SUPER RK 1028 CH ultrasonic bath with heating, 1.4404 tank, 45 litres, 35 kHz, 143
Manufacturer number: 143

Larger batches and a cleaning medium that places greater demands on the standard tank: Bandelin offers the SONOREX SUPER RK 1028 CH for this combination. It combines a welded tank made of 1.4404 stainless steel (AISI 316L) with a heating element that heats the bath to up to 80 °C, with a total capacity of 45 litres and a working capacity of 30 litres. Like the other models in the SUPER-RK series, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and is designed for use in laboratories, medical practices and workshops.Heater and durable bath in a single unitThe heating power is 1,450 watts when operating at 230 volts or 1,400 watts at 115 volts, and the bath temperature can be continuously adjusted between 30 and 80 °C; a dry-run protection feature switches off the heater if the water level is too low. As with the RK 1028 C, the tank is made of welded 1.4404 steel with a thickness of 2.0 mm; compared to the standard tank made of 1.4301, it is generally more resistant to chlorides and more aggressive cleaning agents. At 35 kHz, the unit delivers a peak power of 1,200 watts at a rated power of 300 watts via eight transducer systems, distributed by the automatic SweepTec function to prevent standing waves in the ultrasonic field.Selection guide: with or without heating, which tankAnyone who regularly works with heat and simultaneously requires a more robust tank, for example, for frequent changes of concentrate, will be well served by the RK 1028 CH. If the standard 1.4301 tank is sufficient but a heating element is still required, the RK 1028 H, with a total capacity of 28 litres, is the suitable choice. If heating is not required but a more robust bath is, the RK 1028 C remains the option as an unheated variant with the same bath specifications. For smaller batches, Bandelin offers, amongst others, the RK 514 BH with a capacity of 18.7 litres and the RK 156 BH with a narrow, elongated basin for 9 litres within the SUPER-RK range.Use and maintenanceThe tank is filled to a working capacity of 30 litres; the total volume of 45 litres applies to the tank filled to the brim without a load. According to Bandelin, the RK 1028 CH is fitted with a 50 cm long hose connected to the G 1/2 ball valve on the left-hand side of the unit, which facilitates changing the medium via an external container. The hanging basket and lid are not included in the Scope of delivery; the RK 1028 CH is compatible with baskets K 28 C, K 28 CS, K 28 CA or K 28 CV, together with lids D 1028 C or D 1028 CS. The power cable is 2 metres long and permanently fitted; the unit can be operated at either 230 V or 115 V at 50/60 Hz.Typical applicationsHeated cleaning of large batches of laboratory glassware and instrumentsRemoval of grease and dried-on residues at elevated temperaturesUse with more aggressive cleaning concentrates thanks to the robust tankPreparation and degassing of solvents prior to analytical proceduresFrequently asked questionsHow does the RK 1028 CH differ from the RK 1028 H?Both have a heating element. The RK 1028 CH has a total capacity of 45 litres compared with 28 litres for the RK 1028 H, and additionally features a welded 1.4404 tank with a thickness of 2.0 mm instead of the standard 1.0 mm 1.4301 tank.How quickly does the unit heat up?Bandelin does not state a heating-up time; the heating power is 1,450 watts at 230 V or 1,400 watts at 115 V.Is a drain hose included?Yes, according to Bandelin the RK 1028 CH has a 50 cm long hose connected to the G 1/2 ball valve.Can I use the unit for medical instruments?Bandelin classifies the RK 1028 CH as a Class I medical device in accordance with Regulation (EU) 2017/745. The suitability of the instruments depends on the instrument manufacturer’s specifications.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm, excluding handles/ball valve, with feetWeight (net)23.4 kgShipping weight (gross)26.4 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, rated power 300 W, 8 vibration systemsHeating power1,450 W at 230 V / 1,400 W at 115 VTemperature range30 to 80 °C, dry-run protection for the heaterTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainG 1/2 ball valve with 50 cm hose, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 7.7 A / 115 V 15.0 ADegree of protectionIP 32Packaging dimensions670 x 470 x 565 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 CH ultrasonic bath with heatingPermanently attached mains cable (2 m)Instructions for useHanging basket (K 28 C, K 28 CS, K 28 CA or K 28 CV) and lid (D 1028 C or D 1028 CS) are not included in the Scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding the right hanging basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 CH.

Sale price: €2,974.00 Manufacturer's RRP: €3,913.00 24% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 514 H Ultraschallbad mit Heizung, 13,5 Liter, 207
Bandelin SONOREX SUPER RK 514 H ultrasonic bath with heater, 13.5 litres, 207
Manufacturer number: 207

Ultrasonic bath with heating: SONOREX SUPER RK 514 H The Bandelin SONOREX SUPER RK 514 H is a high-performance ultrasonic cleaner with heating for professional use in laboratories, medical practices and workshops. With a capacity of 13.5 litres (working capacity 9.0 litres) and an ultrasonic frequency of 35 kHz, this ultrasonic bath ensures thorough, gentle cleaning of instruments, laboratory glassware and small parts. The integrated heater warms the cleaning bath to up to 80 °C, thereby helping to dissolve stubborn dirt, whilst the lowest setting of 30 °C allows for gentle cleaning of temperature-sensitive materials. The unit is classified as a Class I medical device; the suitability of the instruments depends on the instrument manufacturer’s specifications. Typical applications in everyday laboratory work include the cleaning of metal and glass instruments, the degassing of solvents prior to analytical procedures, and the reprocessing of laboratory glassware and small parts, which are freed from contamination even in hard-to-reach areas thanks to ultrasonic cavitation. The ultrasonic peak power of 860 W (rated power 215 W), combined with the 600 W heater, enables consistent, reproducible cleaning results even with daily use. The cleaning duration and bath temperature can be continuously adjusted using the rotary knob; the timer covers a range from 1 to 15 minutes and can also be set to continuous operation when longer cleaning cycles are required. This allows the unit to be flexibly adapted to different cleaning tasks, from short cycles for delicate small parts to longer cycles for heavily soiled laboratory glassware. Robust construction for continuous use The tank and housing of the SONOREX SUPER RK 514 H are made of 1.4301 stainless steel; the ultrasonic tank itself has a wall thickness of 1.0 mm, which gives the unit the necessary robustness for daily use in a laboratory setting. A fill-level mark inside the tank makes it easy to fill it correctly with cleaning fluid. For easy and clean emptying, the unit features a G 3/4 ball valve with a 50 cm long hose on the left-hand side, allowing the used bath to be drained directly into a collection vessel. Handles on the sides ensure safe transport, whilst the 2 m long mains cable, which is permanently attached to the unit, allows connection to a standard 230 V domestic socket. With an IP 32 protection rating, the housing is protected against foreign bodies larger than 2.5 mm and obliquely falling dripping water, which further simplifies handling in everyday laboratory use. Weighing 10.8 kg and with compact external dimensions of 355 x 325 x 305 mm, the ultrasonic bath can also be flexibly positioned at a fixed workstation in the laboratory or workshop. Technical details ModelSONOREX SUPER RK 514 H Capacity / Working volume13.5 l / 9.0 l Ultrasonic frequency35 kHz Ultrasonic powerPeak power 860 W, rated power 215 W Heating power600 W Temperature range30–80 °C Timer1–15 min (± 5 %), plus continuous operation Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) External dimensions (L x W x H)355 x 325 x 305 mm Internal dimensions of basin (L x W x D)325 x 300 x 150 mm Weight10.8 kg Degree of protection, housingIP 32 Packaging dimensions (L x W x H)475 x 445 x 380 mm Operating voltage / Conformity230 V~ (± 10 %), 50/60 Hz; Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 514 H ultrasonic bath with heating Mains cable (2 m, permanently attached to the unit) Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or cleaning and disinfection concentrates, a different model from the SONOREX range, or personalised advice on selecting the right ultrasonic bath for your application in a laboratory, practice or workshop? We support you with a personalised procurement service to help you put together the right laboratory equipment and will be happy to advise you on alternatives and complementary products from the Bandelin range. You can find full details at our procurement service. Simply get in touch with us and we’ll provide you with a suitable quote.

Sale price: €1,730.00 Manufacturer's RRP: €2,276.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 514 BH Ultraschallbad mit Heizung, 18,7 Liter, 35 kHz, 263, Produktansicht Bandelin
Bandelin SONOREX SUPER RK 514 BH ultrasonic bath with heating, 18.7 litres, 35 kHz, 263
Manufacturer number: 263

When several beakers, sieves or larger sets of instruments need to be cleaned at the same time, 9 or 10 litres quickly proves to be insufficient. The Bandelin SONOREX SUPER RK 514 BH has a total capacity of 18.7 litres and a working capacity of 12.5 litres, a noticeably greater capacity, whilst remaining part of the SUPER RK series operated by a rotary handle.Four oscillation systems for larger batchesAt an operating frequency of 35 kHz, 860 watts of peak power and 215 watts of rated power are distributed across four oscillation systems; the SweepTec function ensures that, even with this larger tank volume, no standing waves are generated and cavitation acts uniformly, regardless of whether there are several smaller objects or a single large beaker in the bath.600-watt heater for demanding cleaning tasksThe heater covers a range of 30 to 80 °C, with dry-run protection to prevent damage if the liquid level is too low. Cleaning duration and temperature can be adjusted independently using two rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation for longer cleaning cycles.Larger tank than the smaller SUPER RK modelsThe tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the internal dimensions of 325 x 300 x 200 mm offer significantly more space than the smaller SUPER RK models. With external dimensions of 355 x 325 x 385 mm and a net weight of 9.8 kg, the unit remains portable. A G 1/2 ball valve on the left-hand side allows the larger volume of water to be drained without tilting the unit.Selection guide: when the RK 514 BH is suitableIf the capacity of the RK 510 H (9.7 litres) is no longer sufficient because several beakers or a larger set of instruments need to be cleaned simultaneously on a regular basis, the RK 514 BH, with a capacity of 18.7 litres, is the next logical step within the SUPER RK series. If even more capacity is required, for example, for entire sieves or larger batches, models such as the RK 1028 H, with a capacity of 28 litres, are available.Product range overview: SUPER RK, DIGITEC DT and smart STEven with larger volumes, the SUPER RK series retains its simple rotary-knob operation. For digital button operation with an LED display and automatic DEGAS degassing in a similar size class, the DIGITEC DT 512 H with a 13-litre capacity is available; for touchscreen operation with programme memory, the smart ST series is available. In addition to Bandelin SONOREX, Elma Elmasonic ultrasonic baths are also available.Use and maintenanceThe working capacity of 12.5 litres is significantly less than the total capacity of 18.7 litres, allowing several beakers to be placed inside at the same time without the liquid spilling over the rim. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning fluid; with this volume, a more generous refill quantity is recommended. Before the first cycle with freshly prepared medium, a short run-in period in continuous operation helps to remove trapped air. After the final cleaning cycle of the day, the tank can be quickly emptied via the ball valve.Typical applicationsCleaning several beakers or larger laboratory glassware items simultaneouslyCleaning of sieve inserts and larger sets of instrumentsHeat-assisted batch cleaning in workshops and industryDegassing of larger volumes of aqueous solutions prior to analysisFrequently asked questionsHow much does the tank actually hold?The working capacity is 12.5 litres, and the total capacity is 18.7 litres.What temperature range is possible?30 to 80 °C, with dry-run protection for the heater.Where is the drain?On the left, as a ball valve with a G 1/2 connection.Is a basket included?No, the K 14 B or, alternatively, the K 14 AZ hanging basket, as well as the D 514 lid, are available separately.Technical detailsTotal capacity / Working capacity18.7 l / 12.5 lInternal dimensions of the tank (L x W x D)325 x 300 x 200 mmExternal dimensions (L x W x H)355 x 325 x 385 mmWeight (net)9.8 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating power600 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ComplianceLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 465 mmScope of delivery1x Bandelin SONOREX SUPER RK 514 BH ultrasonic bath with heaterFixed mains lead (2 m)Operating instructionsThe hanging basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 14 B hanging basket, the alternative K 14 AZ basket, the D 514 lid or a larger model such as the RK 1028 H, there is an individual procurement need. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

Sale price: €1,787.00 Manufacturer's RRP: €2,351.00 23% below manufacturer's RRP
Discount
Bandelin SONOREX SUPER RK 514 Ultraschallbad, 13,5 Liter, 277
Bandelin SONOREX SUPER RK 514 ultrasonic bath, 13.5 litres, 277
Manufacturer number: 277

SONOREX SUPER RK 514: Ultrasonic bath for professional laboratory use The Bandelin SONOREX SUPER RK 514 is a high-performance ultrasonic bath with a total capacity of 13.5 litres and a working capacity of 9.0 litres, designed for daily use in laboratories, medical practices, clinics and workshops. With an ultrasonic frequency of 35 kHz and an effective rated power of 215 W (peak power 860 W), the unit generates intense cavitation bubbles that reliably remove contaminants whilst being gentle on materials, even in hard-to-reach areas such as cavities, threads or fine openings in instruments and small parts. Thanks to the combination of frequency and rated power, the bath is suitable for both more delicate cleaning tasks and more stubborn soiling, without placing excessive strain on the objects being cleaned. The tank and housing are made of 1.4301 stainless steel; the tank has a wall thickness of 1.0 mm. It is designed for high robustness and a long service life even with intensive use of aqueous cleaning or disinfectant solutions. The timer is conveniently operated via a rotary knob with a range of 1 to 15 minutes (tolerance ±5 %) and a continuous operation setting for longer cleaning cycles, allowing the treatment duration to be individually adjusted to different levels of soiling. For easy draining, the ultrasonic bath features a G 3/4 ball valve with a 50 cm long hose on the left-hand side of the unit, as well as a fill level mark for precise dosing of the cleaning solution. Handles on both sides facilitate handling and transport in everyday laboratory use, whilst the fixed 2 m long mains lead ensures flexible placement at the workstation. The operating voltage of 230 V~ (±10 %) at 50/60 Hz allows connection to standard laboratory power circuits. Typical applications for the ultrasonic bath The SONOREX SUPER RK 514 is suitable for a wide range of cleaning tasks in everyday laboratory work. These include the cleaning of instruments (suitability as specified by the instrument manufacturer), the degassing of solvents prior to analytical applications, and the cleaning of laboratory glassware, pipettes, electrodes and other small parts to remove residues, deposits or contaminants. Thanks to its continuously adjustable timer and robust stainless-steel tank, the ultrasonic bath can be flexibly integrated into various cleaning processes, both for one-off use as part of individual work steps and for recurring routine tasks in reprocessing units. The housing’s IP 32 protection rating and its classification as a Class I medical device in accordance with Regulation (EU) 2017/745 make the device a reliable fixture in professional environments; it also meets the requirements of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. Technical details Capacity / Working capacity13.5 l / 9.0 l Ultrasonic frequency35 kHz Ultrasonic peak power860 W Nominal ultrasonic power (effective)215 W Time control1–15 min (±5 %) and continuous operation, operated via a rotary knob Material of ultrasonic bathStainless steel 1.4301, wall thickness 1.0 mm Housing materialStainless steel 1.4301 External dimensions (L x W x H)355 x 325 x 305 mm Internal dimensions (L x W x D)325 x 300 x 150 mm Weight10.5 kg Degree of protection (housing)IP 32 Operating voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit DrainG 3/4 ball valve with 50 cm hose ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x SONOREX SUPER RK 514 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories for your ultrasonic bath, such as hanging baskets, insert grids, a device holder or suitable cleaning and disinfection concentrates, or do you have specific requirements regarding procurement, delivery times or special terms? Our procurement service provides personalised support in selecting the right accessories and with any special procurement requests relating to your laboratory equipment, guiding you through the process from assessing your requirements right through to delivery.

Sale price: €1,478.00 Manufacturer's RRP: €1,944.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX DIGITEC DT 510 H Ultraschallbad mit Heizung, 9,7 Liter, 20 bis 80 °C
Bandelin SONOREX DIGITEC DT 510 H ultrasonic bath with heating, 9.7 L, 20 to 80 °C, 3206
Manufacturer number: 3206

The Bandelin SONOREX DIGITEC DT 510 H combines a 9.7-litre tank with a 400-watt heater, which can be set to temperatures between 20 and 80 °C. The inner dimensions of the bath are 300 x 240 x 150 mm; it is operated via buttons, and the display shows the setpoint and actual bath temperature.Temperature control with boiling delay protectionThe heater includes boiling delay protection and dry-run protection. The automatic safety shut-off activates 12 hours after the last button press. At 230 V, the heater’s current consumption of 2.5 A is significantly higher than that of the unheated DT 510, which is 0.7 A.Ultrasound with four vibration systemsFour vibration systems deliver a peak power of 640 watts at 35 kHz; the rated power is 160 watts. SweepTec operates fully automatically to counter standing waves in the ultrasonic field; there is also a pulse function and the DEGAS rapid degassing feature, which is activated at the start of the cleaning process. The timer runs in the following increments: 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) or in continuous operation.Tank, drain and weightThe tank (1.0 mm) and housing are made of 1.4301 stainless steel. Of the 9.7-litre total capacity, 6.6 l are used as working volume; a fill level mark is provided. The G 1/2 ball valve on the left-hand side is used for draining; a hose nozzle and hose for fitting to the drain are included. The unit measures 325 x 265 x 300 mm, weighs 7.4 kg and has side handles.Larger tank with heatingIf you need more capacity and heating up to 80 °C, the DT 514 H is the model for you, with a total capacity of 13.5 l, 600 watts of heating power and 860 watts of peak ultrasonic power. The DT 510 H, with a 9.7-litre capacity, is the smaller of the two baths and has a footprint of 325 x 265 mm.AccessoriesFor the DT 510 H, Bandelin supplies the K 10 insert basket (up to 10 kg), the GH 10 instrument holder, the D 510 lid, the DE 510 perforated lid for four insert cups, the ED 9 injection nozzle holder, the ZF 10 laboratory flask holder and the KW 10-0 polypropylene hanging tray. 0.6-litre insert cups are available in glass, plastic and stainless steel. Clamps EK 10 to EK 250 hold laboratory flasks with diameters up to 85 mm.Typical applicationsCleaning of items of various shapes, types and sizes in laboratories, medical practices and workshops at an adjustable bath temperatureRapid degassing of liquidsHomogenisation and emulsificationSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat temperatures can be set?20 to 80 °C at 400 watts of heating power.Where is the drain?On the left, as a G 1/2 ball valve.How does the DT 510 H differ from the DT 510?Both have the same tank and the same ultrasonic power. The DT 510 H also features a heating element and boiling delay protection.What is the unit’s current consumption?2.5 A at 230 V and 4.9 A at 115 V. The 3206 model is available with a CEE 7/7 EU plug for 230 V; Bandelin offers UK, Swiss and US variants under separate order numbers.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mm (excluding handles and ball valve, including feet)Weight (net / gross)7.4 kg / 9.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating400 W, adjustable temperature range 20 to 80 °C, boiling delay protection, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, boiling delay protection, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 510 H ultrasonic bath with heaterMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert cups, and they are available separately.Individual requirements and procurement serviceFor accessories such as the K 10 basket, the D 510 lid or another heated model, individual procurement requirements apply. You can request a quote without obligation via our procurement service.

Sale price: €1,277.00 Manufacturer's RRP: €1,680.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 510 H Ultraschallbad mit Heizung, 9,7 Liter, 35 kHz, 321, Produktansicht Bandelin
Bandelin SONOREX SUPER RK 510 H ultrasonic bath with heating, 9.7 litres, 321
Manufacturer number: 321

The same tank as the RK 510, but with a heater: The Bandelin SONOREX SUPER RK 510 H also has a capacity of 9.7 litres (6.6 litres working volume) and adds a 400-watt heater to its unheated counterpart for cleaning processes that require a heated medium.400-watt heating element with dry-run protectionThe heating element operates between 30 and 80 °C and switches off automatically via the integrated dry-run protection as soon as there is insufficient liquid in the tank. Cleaning duration and temperature are set using two separate rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Same ultrasonic power as the unheated RK 510At an operating frequency of 35 kHz, the RK 510 H, like the RK 510, delivers 640 watts of peak power and 160 watts of rated power via four transducer systems, distributed evenly throughout the tank by the SweepTec function. The tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm.Slightly heavier due to the heating technologyWith a net weight of 7.5 kg, the RK 510 H is only slightly heavier than the unheated RK 510 (7.2 kg); the external dimensions of 325 x 265 x 300 mm are identical. A G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting it. Both variants share the same IP 32 protection rating and are classified as a Class I medical device in accordance with Regulation (EU) 2017/745.When the heating system is worth itGrease, oil or wax residues dissolve much more quickly in heated cleaning fluid than at room temperature; likewise, many cleaning concentrates only become fully effective above a certain temperature. Anyone who regularly deals with such contaminants will benefit from the RK 510 H. If, on the other hand, you work exclusively with pre-heated or cold cleaning media, the RK 510, which has the same design, saves on the additional heating technology.Product range: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range of tank capacities extends from 0.9 litres (RK 31) to 58 litres (RK 1050), all featuring rotary knob controls. The DIGITEC DT series is available for digital button operation with an LED display and automatic degassing, whilst the smart ST series offers touchscreen operation with programme memory. We also offer Elma Elmasonic ultrasonic baths as a second brand in our range.Use and maintenanceThe working capacity of 6.6 litres is less than the total capacity of 9.7 litres, ensuring that heated water does not spill over the rim when beakers or instruments are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning solution; it usually dissolves even more effectively at higher temperatures. Before the first cycle with a freshly prepared solution, a short initial run in continuous operation helps to expel dissolved air. After the last cleaning cycle of the day, the tank, whilst still warm, should be drained via the ball valve and wiped dry.Typical applicationsRemoval of grease and oil residues at elevated bath temperaturesHeat-assisted cleaning of instruments and laboratory glasswareCleaning processes using temperature-activated concentratesCleaning of multiple beakers or small parts in a single batchFrequently asked questionsWhat is the difference between the RK 510 H and the RK 510?Both share the same tank; the RK 510 H also has a 400-watt heater with a temperature range of 30 to 80 °C.What is the usable working capacity?6.6 litres out of a total capacity of 9.7 litres.Where is the drain?On the left, as a ball valve with a G 1/2 connection.Is a basket included in the scope of delivery?No, the K 10 insert basket and the D 510 lid are available separately.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.5 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating power400 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 H ultrasonic bath with heaterFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceThe K 10 insert basket, the D 510 lid or the unheated RK 510 version are available on request. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

Sale price: €1,266.00 Manufacturer's RRP: €1,665.00 23% below manufacturer's RRP
Discount
Bandelin SONOREX DIGITEC DT 514 H Ultraschallbad mit Heizung, 13,5 Liter, 20 bis 80 °C
Bandelin SONOREX DIGITEC DT 514 H Ultrasonic Bath with Heating, 13.5 L, 20 to 80 °C, 3211
Manufacturer number: 3211

The Bandelin SONOREX DIGITEC DT 514 H heats up to an adjustable temperature of 20 to 80 °C with 600 watts and achieves a peak ultrasonic power of 860 watts. The tank measures 325 x 300 x 150 mm internally and has a capacity of 13.5 l.Heating, setpoint and actual valueThe temperature is set using the buttons; the display shows the setpoint and actual values for the bath temperature. Protection against delayed boiling and dry-run protection for the heater are built in. Compared to the DT 510 H (400 watts), the heating power is 50 % higher; accordingly, the current consumption is 3.6 A at 230 V, whilst for the unheated DT 514 it is 1.0 A.Ultrasonic and time controlFour vibration systems deliver a peak power of 860 watts and a rated power of 215 watts at 35 kHz. SweepTec automatically prevents standing waves in the acoustic field; this is complemented by a pulse function and DEGAS degassing. The timer covers 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %); there is also a continuous operation mode and the unit switches off 12 hours after the last button press.Tank, drain and baseThe tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick. The working capacity of 9.0 l can be read from the fill level mark. A G 1/2 left-hand ball valve is provided for draining; a hose connector and hose are included. The bath measures 355 x 325 x 305 mm externally, weighs 9.0 kg and has side handles. The power cable is 2 m long; the degree of protection is IP 33.Which depth is suitable?If you have items to clean that are taller, compare the tank depth: 150 mm for the DT 514 H, 200 mm for the DT 514 BH, which consequently has a capacity of 18.7 l. The heating power is also 600 watts for both models.AccessoriesSuitable accessories include the K 14 insert basket (275 x 245 x 50 mm, up to 10 kg), the GH 14 apparatus holder, the D 514 lid, the DE 514 perforated lid for four insert beakers, the KAH 14.3 cassette holder for DIN cassettes, the SM 14 silicone studded mat and the KW 14 hanging tray. Clamps EK 10 to EK 250 hold laboratory flasks with a diameter of up to 85 mm.Typical applicationsCleaning of items of various shapes, types and sizes in laboratories, medical practices and workshops using a temperature-controlled bathRapid degassing of liquidsHomogenisation and emulsificationSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat bath temperature can be set?20 to 80 °C with a heating power of 600 watts.Does the tank differ from that of the DT 514? No, the tank is identical (325 x 300 x 150 mm). The difference lies in the heating system and the protection against delayed boiling.Where is the drain?On the left-hand side, as a G 1/2 ball valve.Are there other plug types available?Yes. Bandelin offers GB, CH and US variants under separate order numbers, such as 3211-GB. The 3211 model is available with a CEE 7/7 EU plug.Technical detailsTotal capacity / Working capacity13.5 l / 9.0 lInternal dimensions of tank (L x W x D)325 x 300 x 150 mmExternal dimensions (L x W x H)355 x 325 x 305 mm (excluding handles and ball valve, including feet)Weight (net / gross)9.0 kg / 10.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating600 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 H ultrasonic bath with heaterMains cable (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert beakers, and they are available separately.Individual requirements and procurement serviceFor accessories such as basket K 14, cassette holders or lid D 514, and for other heated models, individual procurement is required. You can request a quote via our procurement service.

Sale price: €1,740.00 Manufacturer's RRP: €2,289.00 23% below manufacturer's RRP
Discount
Bandelin SONOREX DIGITEC DT 514 BH Ultraschallbad mit Heizung, 18,7 Liter, 200 mm Tiefe
Bandelin SONOREX DIGITEC DT 514 BH Ultrasonic Bath with Heater, 18.7 L, 200 mm Deep, 3216
Manufacturer number: 3216

The Bandelin SONOREX DIGITEC DT 514 BH has a tank 200 mm deep. Its internal dimensions are 325 x 300 x 200 mm and it has a capacity of 18.7 l, of which 12.5 l is working capacity. It is fitted with a heating element, push-button controls and a drain.200 millimetres deep instead of 150The base area is the same as that of the DT 514 H, but the tank is 50 mm deeper. This increases the total capacity from 13.5 to 18.7 l and the working capacity from 9.0 to 12.5 l. With external dimensions of 355 x 325 x 385 mm, the unit is correspondingly taller and weighs 9.7 kg. The tank (1.0 mm) and housing are made of 1.4301 stainless steel.Heating and safety featuresThe 600-watt heating element is adjustable from 20 to 80 °C; the setpoint and actual temperature are shown on the display. For protection, the heater has built-in delayed-boiling protection and dry-run protection. The DT 514 operates without a heater but with the 150 mm deep tank.Ultrasound and timerFour vibration systems generate a peak power of 860 watts at 35 kHz (215 watts rated power). SweepTec automatically prevents standing waves in the ultrasonic field; there is also a pulse function and DEGAS rapid degassing. The time can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %) or to continuous operation. The unit switches off after twelve hours if no button is pressed.Operation and connectionThe water drains via the G 1/2 ball valve on the left-hand side; a hose connector and hose for installation are included. The mains cable is 2 m long and permanently attached. The current consumption is 3.6 A at 230 V; the protection rating is IP 33; the permissible ambient temperature ranges from 5 to 40 °C.Baskets and holdersFor this tank, Bandelin offers the K 14 B insert basket (275 x 245 x 50 mm, up to 10 kg) and the K 14 AZ basket (285 x 260 x 155 mm, mesh size 12.5 x 12.5 mm), which is designed to hold one full-view mask, two full-face masks or four half-masks. Also available are the GH 14 apparatus holder, the D 514 lid, the DE 514 perforated lid for four insert beakers and the KW 14 B hanging tray (275 x 210 x 195 mm).Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of taller items thanks to a tank depth of 200 mmRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsHow deep is the tank?200 mm, with a base area of 325 x 300 mm.What temperature range is available?20 to 80 °C with a heating power of 600 watts.How much liquid does it hold?The working capacity is 12.5 l; the total capacity is 18.7 l.What mains voltage is the 3216 model designed for?230 V with a CEE 7/7 EU plug. Bandelin supplies versions with UK, Swiss and US plugs under the order numbers 3216-GB, 3216-CH and 3216-1.Technical detailsTotal capacity / Working capacity18.7 l / 12.5 lInternal dimensions of the tank (L x W x D)325 x 300 x 200 mmExternal dimensions (L x W x H)355 x 325 x 385 mm (excluding handles and ball valve, including feet)Weight (net / gross)9.7 kg / 11.8 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating600 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heating element, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 465 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 BH ultrasonic bath with heaterMains cable (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert beakers, and they are available separately.Individual requirements and procurement serviceThe K 14 B or K 14 AZ baskets, the D 514 lid or the KW 14 B hanging tray require individual procurement. You can request a quote via our procurement service.

Sale price: €1,796.00 Manufacturer's RRP: €2,363.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 1028 Ultraschallbad, 28 Liter, 322
Bandelin SONOREX SUPER RK 1028 ultrasonic bath, 28 litres, 322
Manufacturer number: 322

Bandelin SONOREX SUPER RK 1028 Ultrasonic Bath for Laboratories and Clinics The Bandelin SONOREX SUPER RK 1028 ultrasonic bath is a high-performance cleaning system from the SUPER-RK series, designed for professional use in laboratories, hospitals and industry. With a tank capacity of 28 litres and a usable working volume of 19 litres, this ultrasonic bath offers sufficient space for larger batches of laboratory glassware, instruments and small parts. The tank is made of 1.4301 stainless steel with a wall thickness of 1.0 mm and is therefore designed for continuous use in demanding laboratory environments where cleaning takes place several times a day. Typical applications for this ultrasonic bath include the gentle cleaning of laboratory glassware and small parts, the cleaning of instruments in medical practices and hospitals, and the degassing of solvents prior to analytical processes. Thanks to the combination of a peak power of 1,200 W and a rated power of 300 W at an operating frequency of 35 kHz, the unit achieves an intensive yet gentle cavitation effect that works reliably even on stubborn residues on pipettes, beakers and tools. The generous tank capacity of 28 litres is also well suited to the simultaneous cleaning of several instruments or vessels in a single cycle, which noticeably increases throughput in day-to-day laboratory work. SweepTec technology and intuitive operation A key feature is the fully automatic SweepTec function, which prevents standing waves in the ultrasonic field and thus ensures uniform cleaning performance throughout the entire tank volume, including in the peripheral areas of the tank, which are often cleaned less thoroughly in simpler ultrasonic baths. Operation is via a simple rotary knob for setting the cleaning duration, selectable between 1 and 15 minutes (± 5 %) or in continuous operation for longer cleaning cycles. A fill-level mark facilitates correct filling with cleaning or disinfectant solution, whilst the G 3/4 ball valve fitted on the side, complete with a 50 cm hose, allows for straightforward and back-friendly emptying of the tank. Side handles ensure safe transport and handling during everyday laboratory use, whilst the 2-metre power cable, which is permanently attached to the unit, provides additional flexibility when positioning the unit at the workstation. Classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and with an IP 32 protection rating, the SONOREX SUPER RK 1028 is also suitable for regulated environments such as medical practices or clinics, where traceability and documentation requirements are important. Technical details Frequency35 kHz Ultrasonic powerPeak power 1,200 W, rated power 300 W Timer1–15 min (± 5 %), plus continuous operation (∞) Tank materialStainless steel 1.4301, wall thickness 1.0 mm External dimensions (L x W x H)535 x 325 x 400 mm Internal dimensions (L x W x D)500 x 300 x 200 mm Weight16.7 kg VolumeCapacity 28.0 l, working capacity 19.0 l Operating voltage230 V AC (± 10 %), 50/60 Hz DrainG 3/4 ball valve with 50 cm hose, left-hand side Mains cable2 m, permanently attached to the unit ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, housing degree of protection IP 32 Packaging dimensions660 x 455 x 460 mm Scope of delivery 1x Bandelin SONOREX SUPER RK 1028 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require additional accessories such as insert baskets, insert beakers, covers or cleaning and disinfection concentrates, a different configuration, or assistance in selecting a suitable ultrasonic bath for your specific application? As a specialist dealer in laboratory supplies, we are happy to assist you with individual procurement enquiries, special configurations and bespoke solutions for laboratory equipment and accessories. For further information, please visit our procurement service, or contact us directly to discuss your requirements.

Sale price: €2,008.00 Manufacturer's RRP: €2,642.00 24% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX DIGITEC DT 512 H Ultraschallbad mit Heizung, 13 Liter, 35 kHz, 3226, Produktansicht Bandelin
Bandelin SONOREX DIGITEC DT 512 H Ultrasonic Bath with Heating, 13 L, 35 kHz, 3226
Manufacturer number: 3226

Ultrasonic baths with a simple rotary knob reach their limits as soon as several batches are to be run in succession at exactly the same temperature. The Bandelin SONOREX DIGITEC DT 512 H solves this problem with push-button controls and an LED display that shows the remaining time as well as the setpoint and actual bath temperature. With a total volume of 13.0 l and a working capacity of 8.7 l, this ultrasonic bath is suitable for medium-sized batches from laboratories, workshops or medical practices, such as laboratory glassware, tools or small parts from manufacturing.Digital control with LED displayThe buttons replace the rotary knob found on the SUPER-RK series, whilst an LED display simultaneously shows the remaining cleaning time as well as the setpoint and actual temperature values. The time can be set in fixed increments of 1, 2, 3, 4, 5, 10, 15 or 30 minutes; alternatively, continuous operation is available, in each case with a tolerance of ±5 %. If the appliance remains unused for 12 hours without any buttons being pressed, the automatic safety shut-off switches it off.SweepTec, DEGAS and heating up to 80 °CThe fully automatic SweepTec function distributes the ultrasound evenly throughout the tank and prevents standing waves, which would otherwise lead to uneven cleaning. DEGAS rapidly degasses freshly prepared cleaning fluid, reducing the waiting time until the ultrasound takes full effect. The heating system covers a range of 20 to 80 °C and features built-in protection against delayed boiling and dry-run protection. With a nominal power of 215 watts and a peak power of 860 watts, distributed across four vibration systems, the bath generates cavitation.Which DIGITEC model is suitable: DT 100 H or DT 512 HWithin the DIGITEC range, the models differ primarily in terms of volume. The DT 100 H has a capacity of 3.0 l and is suitable for small quantities, such as individual tools, spectacles or small laboratory parts. The DT 512 H, with a total volume of 13.0 l and a working capacity of 8.7 l, is designed for medium-sized batches, such as several laboratory bottles at once or larger series of workpieces. Anyone who regularly cleans larger quantities or bulkier parts will find that the DT 512 H eliminates the need for multiple cycles.Differences from the SUPER RK and smart STThe SUPER RK series is operated via a traditional rotary knob, without a digital display or DEGAS function. The smart ST series goes one step further than DIGITEC, featuring a touchscreen, finely adjustable power settings from 10 to 100 % in 1 % increments, and a system bus interface for a docking station. The DIGITEC DT 512 H falls technically between the two, featuring a digital time and temperature display, but without a touchscreen or the additional programme memory of the smart ST range. The difference to the rotary-knob series is also evident in the protection rating: IP 33 instead of IP 32 for the SUPER RK.Day-to-day use and maintenanceThe drain is controlled via a G 1/2 ball valve on the left-hand side, which makes it easier to change the cleaning medium between batches. The basket and lid are not included in the scope of delivery; the K 10 B insert basket and the D 510 lid are suitable for the DT 512 H. The power cable, 2 metres long, is permanently attached to the unit; operation is possible at either 230 V or 115 V at 50/60 Hz. Protection class I and the heater’s dry-run protection are designed for daily laboratory use.Typical applicationsCleaning of laboratory glassware and pipettes in medium-sized batchesProcessing of tools and small parts in the workshopPre-cleaning of components prior to further processingCleaning tasks in medical practices and laboratories with varying temperature requirementsFrequently asked questionsIs the SONOREX DIGITEC DT 512 H a medical device?Yes, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745; it is also subject to the Low Voltage, EMC and RoHS Directives.Are the basket and lid included in the scope of delivery?No. The scope of delivery comprises the ultrasonic bath with a fixed mains cable and operating instructions; the K 10 B basket and D 510 lid are available separately.How does the DT 512 H differ from the smaller DT 100 H?With a total volume of 13.0 l and a nominal power of 215 watts, the DT 512 H has significantly more capacity than the DT 100 H, which has a volume of 3.0 l and a nominal power of 80 watts, making it suitable for larger batches or multiple batches at the same time.How is the cleaning bath changed?Via the G 1/2 ball valve on the left-hand side of the unit.Does the unit also run on 115 volts?Yes, the mains connection is designed for either 230 V or 115 V at 50/60 Hz.Technical detailsTotal volume13.0 lWorking capacity8.7 lInternal dimensions of the tank (L x W x D)300 x 240 x 200 mmExternal dimensions (L x W x H)325 x 265 x 350 mm (excluding handles/ball valve, including feet)Weightnet 8.2 kg / gross 10.2 kgTank materialStainless steel 1.4301, 1.0 mmUltrasonic frequency35 kHzUltrasonic power215 W nominal power, 860 W peak power, 4 vibration systemsHeating power400 WTemperature range20 to 80 °CTimer1/2/3/4/5/10/15/30 minutes (±5 %) or continuous operation, automatic safety shut-off after 12 hoursOperationButtons, LED display showing remaining time and setpoint/actual bath temperatureFunctionsSweepTec, DEGAS rapid degassing, pulse function, protection against delayed boiling, dry-run protection heaterDrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.7 A / 115 V 5.4 AProtection ratingIP 33ClassificationClass I medical device (EU 2017/745)Scope of delivery1x Bandelin SONOREX DIGITEC DT 512 H ultrasonic bathFixed mains lead (2 m)Instructions for useThe K 10 B insert basket and D 510 lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor suitable baskets, lids or cleaning concentrates for the DIGITEC range, please contact our procurement service.

Sale price: €1,676.00 Manufacturer's RRP: €2,204.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX DIGITEC DT 1028 H Ultraschallbad mit Heizung, 28 Liter
Bandelin SONOREX DIGITEC DT 1028 H Ultrasonic Bath with Heating, 28 L, 3231
Manufacturer number: 3231

The Bandelin SONOREX DIGITEC DT 1028 H has a 500 mm long tank, a capacity of 28 l and a heating power of 1,300 W. The bath temperature can be set between 20 and 80 °C and is shown on the display as both the setpoint and the actual value.Tank and housingThe interior dimensions of the tank are 500 x 300 x 200 mm; it is made of 1.0 mm thick 1.4301 stainless steel, and the housing is made of the same material. The working capacity is 19.0 l; the fill level mark indicates the fill height. The unit measures 535 x 325 x 400 mm externally and weighs 14.7 kg. A G ½ ball valve is fitted at the drain on the left-hand side; a hose connector and hose are included with the unit.Ultrasonic field and heatingEight vibration systems deliver a peak power of 1,200 W at 35 kHz (300 W nominal power). SweepTec prevents standing waves in the ultrasonic field. The DEGAS rapid degassing function is activated at the start of the cleaning process and degasses the bath fluid; the pulse function complements the programme. The 1,300 W heating system is protected against delayed boiling and by dry-run protection. The current consumption is 7.0 A at 230 V and 14.0 A at 115 V.Day-to-day operationThe control panel can be wiped clean. A timer with settings of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) and a continuous operation mode are available. If someone forgets about the bath, it switches itself off 12 hours after the last button press. The handles on the sides make it easy to carry; the power cable is 2 m long and permanently attached.DT 1028 H or DT 1028The same tank is available without a heater as the SONOREX DIGITEC DT 1028 (14.0 kg, current consumption of just 1.4 A at 230 V). If you need to heat cleaning solutions, choose the H version. The DT 1028 CH features 2.0 mm thick, welded 1.4404 stainless steel and has a capacity of 45 l.Suitable accessoriesFor the DT 1028 H, the K 28 stainless steel insert basket (455 x 245 x 50 mm, mesh size 5 x 5 mm, load capacity up to 10 kg) and the D 1028 lid are available. The K 29 EM insert basket (470 x 240 x 45 mm, mesh size 4 x 4 mm, for standard instruments) requires the KT 30 basket support. In addition, there is the KW 28-0 polypropylene insert tank (437 x 230 x 155 mm), ZF 28 laboratory flask holders (13 pieces), 0.6-litre insert beakers, the UG 40 base frame with four height-adjustable feet and the TW 40 transport trolley.Typical applicationsCleaning of items of various shapes, types and sizesInstruments in the K 29 EM insert basket (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Homogenisation and emulsificationRapid degassing of liquidsSonochemical applications, such as radical generation and enhanced mass transferSample preparation for analysisFrequently asked questionsHow does the H model differ from the model without heating?The H version has a 1,300 W heater with protection against delayed boiling, dry-run protection and a temperature display. The tank, vibration systems and functions are otherwise identical.How long can the cleaning duration be set for?In increments of 1, 2, 3, 4, 5, 10, 15 and 30 minutes, or in continuous operation.Where is the drain located?On the left, as a G ½ ball valve.What is the current consumption?7.0 A at 230 V, 14.0 A at 115 V.Technical detailsTotal capacity / Working capacity28.0 l / 19.0 lInternal dimensions of the tank (L x W x D)500 x 300 x 200 mmExternal dimensions (L x W x H)535 x 325 x 400 mm (excluding handles and ball valve, including feet)Weight (net)14.7 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsHeating power1,300 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 mins (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ½, left-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 7.0 A / 115 V 14.0 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions660 x 455 x 460 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 1028 H ultrasonic bath with heaterPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainBaskets, lid, base frame and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service will request quotes for baskets, lids, base frames, trolleys or a bath in a different size from the SONOREX range on your behalf.

Sale price: €2,343.00 Manufacturer's RRP: €3,082.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 1028 H Ultraschallbad mit Heizung, 1.4301-Wanne, 28 Liter, 35 kHz, 324, Produktansicht Bandelin
Bandelin SONOREX SUPER RK 1028 H Ultrasonic Bath with Heating, 1.4301 Tank, 28 L, 35 kHz, 324
Manufacturer number: 324

Anyone wishing to clean large quantities of laboratory glassware, instruments or workpieces needs a basin that holds more than a tabletop unit, yet still fits on the worktop. The Bandelin SONOREX SUPER RK 1028 H offers exactly this intermediate size: a total capacity of 28 litres, a working capacity of 19 litres and a heater that brings the bath up to 80 °C. Bandelin lists this ultrasonic bath with heating as a Class I medical device in accordance with Regulation (EU) 2017/745. The suitability of instruments for cleaning depends on the instrument manufacturer’s specifications.Heated cleaning with a uniform ultrasonic fieldThe 1,300-watt heater regulates the bath temperature continuously between 30 and 80 °C and switches off via the dry-run protection if the water level is too low. Warmer water dissolves fats and dried-on residues more quickly than cold water, which is why the heating function is particularly useful for soiling that comes away only slowly at room temperature. The SweepTec function automatically modulates the ultrasonic field and prevents standing waves in the tank, so that the cavitation effect also reaches the edge areas of the tank. At an operating frequency of 35 kHz, the unit achieves a peak power of 1200 watts with a nominal power of 300 watts; in addition, a pulse function can be activated to provide a brief surge of energy.Selection guide: When is the RK 1028 H worthwhile?When choosing a model from the SUPER-RK series, the batch size is the key factor. With a working capacity of 19 litres, the RK 1028 H is sufficient for several flasks, beakers or a larger number of small parts in a single cleaning cycle; for individual instruments or small batches, the more compact models in the range, such as the RK 100 H with a 3-litre capacity or the RK 510 H with a 9.7-litre capacity, are often sufficient. For cleaning agents that have a more corrosive effect on the standard tank, for example, when more aggressive concentrates are used frequently, the sister models RK 1028 C and RK 1028 CH are available with a welded tank made from molybdenum-alloyed stainless steel 1.4404, which is generally more resistant to chlorides than the 1.4301 material used here. The tank of the RK 1028 H is 1.0 mm thick.The RK 1028 range and alternativesWithin the 1028 size range, the three variants differ only in terms of tank material and heating element: The RK 1028 H features the standard 1.4301 tank and a heating element; the RK 1028 C features the higher-grade 1.4404 tank without a heating element; and the RK 1028 CH combines both. Those who prefer a digital display and push-button controls to a rotary knob will find comparable technology in Bandelin’s SONOREX-DIGITEC range, featuring an LED display for setpoint and actual temperature values; however, this is currently only available in smaller sizes up to 13 litres. In addition to Bandelin, there are also ultrasonic baths from Elma, such as the Elmasonic P series with switchable dual-frequency technology, for laboratories that wish to switch between two frequencies rather than operating continuously at 35 kHz.Use and maintenanceTo ensure consistent cleaning results, the tank should be filled to a working capacity of 19 litres, not to the total volume of 28 litres; the total volume refers to the tank filled to the brim without the items to be cleaned. To change the cleaning solution, the bath can be drained via the ball valve on the drain, specified in the data sheet as G 1/2 inch on the left-hand side of the unit. Cleaning and disinfectant concentrates for the SONOREX series are available as accessories and are not included in the scope of delivery, nor are the insert basket and lid. The fixed power cable is 2 metres long; the unit operates on either 230 V or 115 V, at 50/60 Hz in each case.Typical applicationsCleaning and preparation of laboratory glassware such as flasks, beakers and pipettesCleaning of instruments, the suitability of the instruments depends on the instrument manufacturer’s specificationsDegassing of solvents prior to analytical proceduresCleaning of small parts and tools in workshops and industryFrequently asked questionsHow hot can the water get during operation?The heating system regulates the temperature continuously between 30 and 80 °C; a dry-run protection feature switches the heating off if the water level is too low.Are the basket and lid included in the scope of delivery?No, both are available as accessories; the K 28 insert basket and the D 1028 lid are suitable.Can the unit also be operated at 115 volts?Yes, the RK 1028 H is designed to operate at either 230 V or 115 V, at 50/60 Hz in each case.Is the unit suitable for use in a dental practice?Bandelin classifies the RK 1028 H as a Class I medical device in accordance with Regulation (EU) 2017/745. The suitability of the instruments depends on the instrument manufacturer’s specifications.Technical detailsTotal capacity / Working capacity28.0 l / 19.0 lInternal dimensions of tank (L x W x D)500 x 300 x 200 mmExternal dimensions (L x W x H)535 x 325 x 400 mm, excluding handles/ball valve, including feetWeight (net)14.7 kgShipping weight (gross)17.3 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsHeating power1,300 WTemperature range30 to 80 °C, dry-run protection for the heating elementTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand side (as per data sheet)Mains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 7.0 A / 115 V 14.0 AProtection ratingIP 32Packaging dimensions660 x 455 x 460 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 H ultrasonic bath with heatingPermanently attached mains lead (2 m)Instructions for useThe K 28 insert basket and D 1028 lid are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 H.

Sale price: €2,331.00 Manufacturer's RRP: €3,067.00 24% below manufacturer's RRP
Discount
Bandelin SONOREX DIGITEC DT 510 Ultraschallbad, 9,7 Liter, 35 kHz
Bandelin SONOREX DIGITEC DT 510 ultrasonic bath, 9.7 L, 35 kHz, 3245
Manufacturer number: 3245

The Bandelin SONOREX DIGITEC DT 510 has four vibration systems and a tank measuring 300 x 240 x 150 mm internally and with a capacity of 9.7 l. The unit is unheated, is operated via buttons and is drained via a ball valve.Tank and vibration systemsThe working capacity is 6.6 l; the level indicator shows the fill level. The tank is 1.0 mm thick and, like the housing, is made of 1.4301 stainless steel. At 35 kHz, the four vibration systems deliver a peak power of 640 watts; the rated power is 160 watts. The two vibration systems of the DT 255 achieve the same peak power with a narrower tank.SweepTec, pulse and DEGASThe SweepTec function automatically prevents standing waves in the ultrasonic field. In addition, there is a pulse function and the DEGAS degassing function, which is activated at the start of the cleaning process. Twelve hours after the last button press, the unit switches off automatically.Operation and drainControl is via wipeable buttons; the display shows the remaining running time. The timer offers settings of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) as well as continuous operation. The G 1/2 ball valve is located on the left-hand side; the hose connector and hose for connecting to the drain are included with the unit. If you require an adjustable heating function ranging from 20 to 80 °C, this is available in the DT 510 H model, which features the same tank.Dimensions, weight and connectionsWith external dimensions of 325 x 265 x 300 mm and a weight of 7.3 kg, the bath can still be easily moved using the side handles. The 2 m long mains cable is permanently connected; the current consumption is 0.7 A at 230 V. Degree of protection IP 33, ambient temperature 5 to 40 °C.Holders, baskets and insertsBandelin offers the following accessories for the DT 510: the K 10 insert basket (250 x 195 x 50 mm, mesh size 5 x 5 mm, up to 10 kg), the GH 10 appliance holder (260 x 200 mm, up to 10 kg), the D 510 lid and the DE 510 perforated lid for four insert cups. The ED 9 injection nozzle holder, made of stainless steel, has holes with diameters of 9.5, 5.5, 4.5 and 3.5 mm. ZF 10 laboratory flask holders secure flasks in the insert basket; the KW 10-0 hanging tray (242 x 182 x 135 mm) is made of polypropylene.Typical applicationsUltrasonic cleaning of items of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of multiple parts simultaneously in the insert basketCleaning of injection nozzles using the ED 9 nozzle holderRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of Class I medical devices; the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhere is the drain?On the left-hand side, as a G 1/2 ball valve.Does the DT 510 have a heating function?No. The heated version is the DT 510 H.How many insert cups fit under the perforated lid?The DE 510 perforated lid is designed to hold four insert cups.Are there other plug types available?Bandelin supplies GB, CH and US variants under their own order numbers, such as 3245-GB. The 3245 model is available with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mm (excluding handles and ball valve, including feet)Weight (net / gross)7.3 kg / 8.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 510 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert cups, and they are available separately.Individual requirements and procurement serviceFor the K 10 insert basket, the D 510 lid, the ED 9 nozzle holder or the heated version DT 510 H, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories or another SONOREX model.

Sale price: €1,038.00 Manufacturer's RRP: €1,365.00 23% below manufacturer's RRP
Discount
Bandelin SONOREX DIGITEC DT 514 Ultraschallbad, 13,5 Liter, 35 kHz
Bandelin SONOREX DIGITEC DT 514 Ultrasonic Bath, 13.5 L, 35 kHz, 3250
Manufacturer number: 3250

The tank of the Bandelin SONOREX DIGITEC DT 514 is almost square, with a base measuring 325 x 300 mm, and has a capacity of 13.5 l at a depth of 150 mm. The bath has four vibration systems, push-button controls and a ball valve drain. This model does not feature a built-in heater.Larger surface area compared to the DT 510The DT 510 has a significantly smaller base area of 300 x 240 mm, whilst the depth of 150 mm is identical. The DT 514 has a working capacity of 9.0 l; the fill-level marker helps with filling. The unit measures 355 x 325 x 305 mm externally and weighs 8.7 kg; side handles make it easier to carry.860 watts peak powerFour vibration systems achieve a peak power of 860 watts at 35 kHz; the nominal power is 215 watts. The SweepTec function automatically prevents standing waves in the ultrasonic field; a pulse function and DEGAS degassing are also included. DEGAS is activated at the start of the cleaning process.Timer, shut-off and drainThe cleaning duration can be set using the buttons to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); alternatively, the bath runs in continuous operation. The display shows the remaining time; the unit switches off automatically twelve hours after the last button press. The G 1/2 ball valve on the left-hand side drains the tank; a hose connector and hose are included.With or without heatingThe DT 514 H features the same tank and additionally offers 600 watts of heating power for temperatures ranging from 20 to 80 °C. If you need even more depth, you can opt for the DT 514 BH with a tank depth of 200 mm and a capacity of 18.7 l, which is also heated. The DT 514 is suitable if the bath liquid does not need to be heated.Accessories for the large tankBandelin offers the following accessories for the DT 514: the K 14 insert basket (275 x 245 x 50 mm, up to 10 kg), the GH 14 apparatus holder, the D 514 lid and the DE 514 perforated lid for four insert beakers. The KAH 14.3 cassette holder (305 x 205 x 135 mm) holds three 1/1 DIN cassettes, six 1/2 DIN cassettes or twelve 1/4 DIN cassettes and can carry up to 5 kg. The SM 14 silicone studded mat and the KW 14 polypropylene hanging tray with PVC lid (280 x 215 x 145 mm) complete the range.Typical applicationsUltrasonic cleaning of items of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of multiple items simultaneously in an insert basketRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments classified as Class I medical devices; the suitability of the instruments is determined by the instrument manufacturer’s specificationsFrequently asked questionsWhat is the working capacity?9.0 l out of a total capacity of 13.5 l.Does the DT 514 have a heating function?No. Heated versions are the DT 514 H and the DT 514 BH.How many DIN cassettes does the KAH 14.3 cassette holder hold?Three 1/1 cassettes, six 1/2 cassettes or twelve 1/4 cassettes. The holder is not included in the scope of delivery.What mains voltage does the unit require?The 3250 model on offer operates at 230 V~ (± 10 %), 50/60 Hz. For 115 V, Bandelin offers the 3250-1 model. The current consumption is 1.0 A at 230 V.Technical detailsTotal capacity / Working capacity13.5 l / 9.0 lInternal dimensions of the tank (L x W x D)325 x 300 x 150 mmExternal dimensions (L x W x H)355 x 325 x 305 mm (excluding handles and ball valve, including feet)Weight (net / gross)8.7 kg / 10.6 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, nominal power 215 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 1.0 A / 115 V 1.9 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainBaskets, lids, holders and insert beakers are not included in the scope of delivery, and are available separately.Individual requirements and procurement serviceThe K 14 insert basket, the KAH 14.3 cassette holder, the D 514 lid or a heated version are available on an individual procurement basis. You can request a quote via our procurement service.

Sale price: €1,487.00 Manufacturer's RRP: €1,956.00 23% below manufacturer's RRP
Discount
Bandelin SONOREX DIGITEC DT 1028 Ultraschallbad, 28 Liter, 35 kHz
Bandelin SONOREX DIGITEC DT 1028 Ultrasonic Bath, 28 L, 35 kHz, 3255
Manufacturer number: 3255

The Bandelin SONOREX DIGITEC DT 1028 is the 28-litre bath in the DIGITEC range without a heating element. The tank measures 500 x 300 x 200 mm; eight vibration systems operate at 35 kHz with a peak power of 1,200 W, and the current consumption is 1.4 A at 230 V.Designed without a heaterThe DT 1028 has neither a heating element nor a temperature preset. Consequently, it lacks the boiling delay protection and dry-run protection of the heating; the list of functions includes a pulse function, SweepTec, DEGAS rapid degassing and an automatic shut-off 12 hours after the last button press. If you wish to heat the bath fluid, take a look at the heated DT 1028 H, which features the same tank and 1,300 W of heating power.Tank and dimensionsInside, the tank measures 500 x 300 x 200 mm and is made from 1.0 mm thick 1.4301 stainless steel. The housing is made from the same material. The total capacity is 28.0 l, the working capacity 19.0 l, and there is a fill level mark. Externally, the unit measures 535 x 325 x 400 mm and weighs 14.0 kg. The G ½ ball valve is located on the left-hand side of the drain; a hose connector and hose are supplied.Ultrasonic treatment and operationThe sound field is generated at 35 kHz with a peak power of 1,200 W and a nominal power of 300 W. SweepTec prevents standing waves. The DEGAS function degasses the liquid at the start of the cleaning process. The wipe-clean buttons allow you to select 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %) or continuous operation; the display shows the remaining time. The handles are located on the sides; the 2-metre power cable is permanently attached.Which size is suitable?With just under half the capacity, the SONOREX DIGITEC DT 514, at 13.5 l, is a suitable option. The DT 1028 CH is larger, with a capacity of 45 l, and also features a 1,450 W heater. The DT 1028 is suitable if a 28-litre tank is required and the bath fluid does not need to be heated.AccessoriesThe DT 1028’s range of accessories includes the K 28 insert basket (455 x 245 x 50 mm, mesh size 5 x 5 mm, load capacity up to 10 kg), the D 1028 lid and the GH 28 apparatus holder. The K 29 EM insert basket (470 x 240 x 45 mm, mesh size 4 x 4 mm) requires the KT 30 basket support, whilst the SM 29 silicone studded mat is available in a pack of two. The range also includes the KW 28-0 hanging tray, the ES 4 insert beakers with insert strips for four beakers, the UG 40 base frame and the TW 40 trolley.Typical applicationsUltrasonic cleaning in medical practices, laboratories and workshopsSample preparation for analysis and rapid degassing of liquidsHomogenisation, emulsification and sonochemical applications such as radical generationInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability subject to the instrument manufacturer’s specifications)Frequently asked questionsDoes the DT 1028 have a heating function?No. The model with a heating function is the DT 1028 H.How many vibration systems does the bath have?Eight, operating at 35 kHz and 1,200 W peak power.What is included in the scope of delivery for the drain?A ball valve, hose connector and hose for fitting to the drain on the left-hand side.What is the current consumption?1.4 A at 230 V, 2.8 A at 115 V.Technical detailsTotal capacity / Working capacity28.0 l / 19.0 lInternal dimensions of the tank (L x W x D)500 x 300 x 200 mmExternal dimensions (L x W x H)535 x 325 x 400 mm (excluding handles and ball valve, including feet)Weight (net)14.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ½, left-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 1.4 A / 115 V 2.8 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions660 x 455 x 460 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 1028 ultrasonic bathPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainInsert basket, lid, base frame and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceFor accessories for the DT 1028 or any other bath from the SONOREX range, our procurement service is available to handle enquiries.

Sale price: €2,024.00 Manufacturer's RRP: €2,662.00 23% below manufacturer's RRP
Discount
Bandelin SONOREX DIGITEC DT 1028 CH Ultraschallbad mit Heizung, 45 Liter
Bandelin SONOREX DIGITEC DT 1028 CH Ultrasonic Bath with Heating, 45 L, 3266
Manufacturer number: 3266

The Bandelin SONOREX DIGITEC DT 1028 CH is a heated ultrasonic bath with a large tank. It has a capacity of 45.0 l (usable volume 30.0 l); the welded tank, made of 1.4404 stainless steel, is 2.0 mm thick, and the 1,450 W heater brings the bath fluid up to 80 °C.Tank dimensions: 500 x 300 x 300 mmThe tank is 500 mm long, 300 mm wide and 300 mm deep on the inside. It is welded from 2.0 mm thick 1.4404 stainless steel; the housing is made of stainless steel. The unit weighs 23.4 kg and measures 540 x 340 x 500 mm externally. The drain consists of a G ½ ball valve with a 50 cm hose on the left-hand side; a level mark indicates the fill level.Ultrasound and heatingEight vibration systems operate at 35 kHz with a peak power of 1,200 W and a nominal power of 300 W. The heating element has a power rating of 1,450 W at 230 V (1,400 W at 115 V) and is adjustable between 20 and 80 °C; it also features boiling delay protection and dry-run protection of the heating. SweepTec prevents standing waves; the DEGAS rapid degassing function is activated at the start of the cleaning process, and there is also a pulse function. The current consumption at 230 V is 7.7 A.OperationThe duration and temperature are preselected using the wipe-clean buttons; the display shows the remaining time, the setpoint and the current value. The duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %), plus continuous operation. The bath switches itself off 12 hours after the last button press. Side handles help with moving the 23.4 kg unit.Baskets, lids and base frameAccessories include the K 28 C insert basket (455 x 245 x 50 mm, mesh size 5 x 5 mm, up to 10 kg) and the K 28 CS basket (430 x 240 x 50 mm, up to 40 kg). The D 1028 C lid is designed for the K 28 C basket, whilst the D 1028 CS lid is designed for the K 28 CS basket. The K 28 CA and K 28 CV baskets accommodate three full-view masks and six full-face masks respectively (470 x 270 x 215 mm, mesh size 12.5 x 12.5 mm). The UG 40 stainless steel base frame has four height-adjustable feet; there is also a TW 40 transport trolley and FT 40 film test frames for testing the bath.Where the DT 1028 CH fits into the rangeThe SONOREX DIGITEC DT 1028 H has the same footprint, with a tank depth of 200 mm and a capacity of 28 l (tank made from 1.0 mm thick 1.4301 stainless steel, 1,300 W heater). The DT 1050 CH, with a capacity of 90 l, 16 vibration systems and a peak power of 2,400 W, is the larger model; its tank is also made of welded 1.4404 stainless steel, 2.0 mm thick. The DT 1058 M model, with a capacity of 46 l, does not, however, have a heating element.Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizesCleaning of masks in the K 28 CA and K 28 CV basketsHomogenisation, emulsification and rapid degassing of liquidsSonochemical applications and sample preparation for analysisUltrasonic cleaning in medical practices, laboratories and workshopsInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow much liquid does the tank hold?The total capacity is 45.0 l, the working capacity 30.0 l. The tank has a fill level mark.What is the heating power of the unit?1,450 W at 230 V, 1,400 W at 115 V. The temperature range is between 20 and 80 °C.Where is the drain located?On the left-hand side as a G ½ ball valve with a 50 cm hose.Are there other plug types available?Yes. Bandelin offers GB, CH and US versions (115 V) under separate order numbers; the 230 V version with a CEE 7/7 plug is offered here.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm (excluding handles and ball valve, including feet)Weight (net)23.4 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsHeating power230 V 1,450 W, 115 V 1,400 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, boiling delay protection, dry-run protection of the heating, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4404, 2.0 mm, weldedHousing materialStainless steelDrainG ½ ball valve with 50 cm hose, left-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 7.7 A / 115 V 15.0 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions670 x 470 x 565 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 1028 CH ultrasonic bath with heatingPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainInsert baskets, lid, base frame and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceFor baskets, lids, base frames or trolleys, and for enquiries regarding the appropriate tank size, please contact our procurement service.

Sale price: €2,984.00 Manufacturer's RRP: €3,926.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 510 Ultraschallbad, 9,7 Liter, 35 kHz, 327, Produktansicht Bandelin
Bandelin SONOREX SUPER RK 510 ultrasonic bath, 9.7 litres, 327
Manufacturer number: 327

Not every cleaning task requires heat. If you are already working with a medium at a specific temperature or at room temperature, an additional heating element is simply unnecessary technology in the unit. The Bandelin SONOREX SUPER RK 510 has a total capacity of 9.7 litres and a working capacity of 6.6 litres, providing ample space for laboratory glassware and larger small parts; it is deliberately designed without a heating function.Powerful cleaning even without heatAt an operating frequency of 35 kHz, the RK 510 delivers 640 watts of peak power and 160 watts of rated power via four vibration systems. The SweepTec function continuously modulates the ultrasonic field to prevent standing waves from forming and ensure that cavitation acts evenly throughout the tank, even without auxiliary heating.Robust tank for daily useThe tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm. Operation is via a rotary knob; the timer covers 1 to 15 minutes (± 5 %), and continuous operation is also available. With a net weight of 7.2 kg and external dimensions of 325 x 265 x 300 mm, the unit can be moved around the laboratory with minimal effort.Ball valve drain for easy medium changeA G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting or tilting it, which is practical when the cleaning medium needs to be changed frequently. IP 32 protection rating and CE conformity according to the Medical Devices Regulation, the Low Voltage Directive, the EMC Directive and the RoHS Directive allow it to be used in laboratories, medical practices and workshops alike.Selection guide: unheated or with heatingThe RK 510 shares the same tank size as the heated RK 510 H; both have a capacity of 9.7 litres, with a working volume of 6.6 litres. Those working exclusively with cold or pre-tempered media can save on the additional heating technology with the RK 510. As soon as grease or oil residues require a higher bath temperature, the RK 510 H is the more suitable choice, given the identical tank size.Product range breakdown: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range extends from 0.9 litres (RK 31) to 58 litres (RK 1050), with operation consistently via rotary knobs. Those looking instead for a digital display with DEGAS degassing will find this in the DIGITEC DT series, whilst the smart ST series features touchscreen operation with programme memory. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and maintenanceThe working capacity of 6.6 litres is deliberately set below the total capacity of 9.7 litres to prevent water from spilling over the rim when beakers or laboratory glassware are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid. A short pre-run in continuous operation before the first cleaning cycle removes dissolved air from freshly prepared medium. After the last use of the day, the tank can be drained via the ball valve and then wiped dry to prevent limescale or cleaning agent residues.Typical applicationsCleaning of beakers and laboratory glassware without the need for heatDegassing of aqueous solutions prior to analytical proceduresCleaning of tools and small parts in the workshopPre-cleaning of larger batches of instruments prior to further processingFrequently asked questionsCan the RK 510 be heated?No, the RK 510 is the unheated version; the heated version with the same tank size is the RK 510 H.Where is the drain?On the left, as a ball valve with a G 1/2 connection.How much volume is actually available for cleaning?6.6 litres working capacity with a total capacity of 9.7 litres.Is the device a medical device?Yes, Class I according to Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 ultrasonic bathFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 10 insert basket, the D 510 lid or the heated version RK 510 H, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories, a replacement basket or another model from the SONOREX range.

Sale price: €1,027.00 Manufacturer's RRP: €1,351.00 23% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 1028 C Ultraschallbad, 1.4404-Wanne, 45 Liter, 35 kHz, 661, Produktansicht Bandelin
Bandelin SONOREX SUPER RK 1028 C ultrasonic bath, 1.4404 tank, 45 litres, 35 kHz, 661
Manufacturer number: 661

Not every cleaning task requires heat; indeed, some cleaning agents and materials do not tolerate it well. The Bandelin SONOREX SUPER RK 1028 C operates without heating and instead features a welded tank made from high-alloy stainless steel 1.4404 (AISI 316L). With a total capacity of 45 litres and a working capacity of 30 litres, this ultrasonic bath is one of the larger models in the SUPER-RK series and, like all units in the range, is classified as a Class I medical device in accordance with Regulation (EU) 2017/745.Robust tank for continuous operation without heatingThe 1.4404 grade is molybdenum-alloyed and is therefore generally more resistant to chlorides and more aggressive cleaning agents than the standard 1.4301 grade, from which the other unheated SUPER-RK models, such as the RK 1040, are manufactured. The tank is welded rather than drawn and has a thickness of 2.0 mm, twice that of the standard RK 1028 H model. On the ultrasonic side, the RK 1028 C delivers a peak power of 2,000 watts and a nominal power of 500 watts at 35 kHz, distributed across ten vibration systems. The SweepTec function operates fully automatically to counter standing waves in the acoustic field, whilst an additional pulse function briefly increases the energy output to tackle more stubborn dirt.Typical applicationsCleaning of larger batches of laboratory glassware, tools and componentsPreparation and degassing of cleaning media prior to analytical processesUse with cleaning concentrates that are more aggressive towards standard stainless steelWorkshop and industrial applications with high throughput and no temperature requirementsThe 1028 series and alternatives in the rangeIf you additionally need heating, the RK 1028 CH with an identical tank offers the heated version with the same tank material. If the standard 1.4301 tank is sufficient, the RK 1028 H with the same volume and heating is the more cost-effective alternative. For smaller batches without heating, Bandelin also offers the RK 510 with a capacity of 9.7 litres and the RK 1040 with a round tank and a capacity of 39.5 litres. In addition to the SONOREX range, we also offer ultrasonic baths from Elma, for example with switchable dual-frequency technology, for applications where a fixed frequency of 35 kHz is insufficient.Use and maintenanceThe tank is filled to a working capacity of 30 litres; the total volume of 45 litres refers to the tank filled to the brim without the items to be cleaned. The ball valve on the drain, specified in the data sheet as G 1/2 inch on the left-hand side of the unit, is used for draining and changing the cleaning medium. The insert basket and lid are not included in the scope of delivery; for the RK 1028 C, the K 28 C or K 28 CS baskets are suitable, with the corresponding lids D 1028 C or D 1028 CS respectively. Cleaning concentrates for the SONOREX series can be purchased separately. The power cable is 2 metres long and permanently attached to the unit; operation is possible with either 230 V or 115 V.Frequently Asked QuestionsWhy does the RK 1028 C not have heating?This is the unheated basic version of the 1028 model; for heated operation with the same tank, there is the sister model RK 1028 CH.What distinguishes the 1.4404 tank from the standard tank?The tank of the RK 1028 C is welded rather than drawn, 2.0 mm thick instead of 1.0 mm, and is made from the molybdenum-alloyed stainless steel 1.4404, which is generally more resistant to chlorides than the standard material 1.4301.How much does the unit weigh when shipped?The net weight of the RK 1028 C is 24.9 kg; when packed in a carton, the weight increases to 28.0 kg.Is the device classified as a medical device?Yes, Bandelin classifies the RK 1028 C as a Class I medical device in accordance with Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of the tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm, excluding handles/ball valve, with feetWeight (net)24.9 kgShipping weight (gross)28.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 2,000 W, nominal power 500 W, 10 vibration systemsHeatingNot applicable, unheated modelTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.2 A / 115 V 4.4 ADegree of protectionIP 32Packaging dimensions670 x 470 x 565 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 C ultrasonic bathPermanently attached mains cable (2 m)Instructions for useThe insert basket (K 28 C or K 28 CS) and lid (D 1028 C or D 1028 CS) are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 C.

Sale price: €3,111.00 Manufacturer's RRP: €4,039.00 22% below manufacturer's RRP
Discount
Topseller
Bandelin SONOREX SUPER RK 512 H Ultraschallbad mit Heizung, 13 Liter, 795
Bandelin SONOREX SUPER RK 512 H ultrasonic bath with heating, 13 litres, 795
Manufacturer number: 795

SONOREX SUPER RK 512 H ultrasonic bath with heating for everyday laboratory use The SONOREX SUPER RK 512 H is an ultrasonic bath with heating designed for cleaning tasks in everyday laboratory and practice work. With a total volume of 13 litres and a usable working capacity of 8.7 litres, the stainless steel tank offers sufficient space for laboratory glassware, small parts and instruments. The ultrasonic cleaning operates at a frequency of 35 kHz with a peak power of 860 W and an effective nominal power of 215 W, reliably and gently removing adhering dirt, residues and deposits. Thanks to its compact external dimensions of 325 x 265 x 350 mm, the ultrasonic bath can be flexibly positioned on laboratory benches, workbenches or in smaller cleaning stations without taking up much space. Thanks to the combination of powerful ultrasonic cleaning and adjustable heating, the SONOREX SUPER RK 512 H is suitable both for occasional use at a single workstation and for regular use in laboratories with a higher throughput of small parts and glassware requiring cleaning. Laboratory applications Typical applications for this ultrasonic bath include the cleaning of laboratory glassware and small parts, the pre-cleaning and preparation of instruments, and the degassing of solvents prior to analytical applications. Thanks to its comparatively large working capacity of 8.7 litres, the unit is also suitable for the routine cleaning of pipettes, sample vessels and other small parts used in everyday laboratory work. The integrated heater allows temperature control from 30 to 80 °C, which further enhances the cleaning effect on more stubborn residues and enables a process temperature tailored to the specific application and cleaning agent. The cleaning duration and bath temperature can be set directly and easily on the unit using the rotary knob; the timer covers a range of 1 to 15 minutes (±5 %) as well as continuous operation, so that both short cleaning cycles and longer applications can be carried out. A fill-level mark inside the tank facilitates correct and repeatable filling with cleaning fluid. Robust construction for continuous use The tank and housing of the ultrasonic bath are made of 1.4301 stainless steel; the ultrasonic tank itself has a wall thickness of 1.0 mm. A G 1/2 ball valve on the side, with a hose (packed separately, for mounting), allows the cleaning fluid to be drained easily and cleanly without having to lift or tilt the tank. Handles on the sides make it easy to move the unit, whilst the fixed, 2-metre-long mains cable ensures straightforward connection to a 230 V power supply. With an IP 32 protection rating, the housing is protected against foreign bodies larger than 2.5 mm and dripping water falling at an angle. The unit is CE-marked as a Class I medical device in accordance with Regulation (EU) 2017/745 and also complies with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. Technical details ModelSONOREX SUPER RK 512 H Frequency35 kHz Ultrasonic powerPeak power 860 W, nominal power (effective) 215 W Heating power400 W Temperature range30 to 80 °C, adjustable Timer1 to 15 min (±5 %), plus continuous operation Total capacity / Working capacity13.0 l / 8.7 l External dimensions (L x W x H)325 x 265 x 350 mm Internal dimensions (L x W x D)300 x 240 x 200 mm Weight10.1 kg Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) DrainG 1/2 ball valve with hose (packed separately, for mounting), left-hand side Degree of protection, housingIP 32 Operating voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x SONOREX SUPER RK 512 H ultrasonic bath with heating Operating instructions Fixed mains cable (2 m) Insert baskets, lids and cleaning concentrates are not included in the scope of delivery. Individual requirements & procurement service Our procurement service accepts enquiries for insert baskets, lids, cleaning concentrates or another model in the SONOREX range.

Sale price: €1,669.00 Manufacturer's RRP: €2,196.00 24% below manufacturer's RRP
Bandelin SONOREX smart ST 514 BH Ultraschallbad mit Heizung, 7107
Bandelin SONOREX smart ST 514 BH ultrasonic bath with heating, 18.7 litres, 7107
Manufacturer number: 7107

Anyone who regularly has to thoroughly clean instruments, workpieces or glassware in a laboratory, dental practice or workshop is familiar with the problem: cleaning time, temperature and intensity must be precisely tailored to the items being cleaned, without making the operation complicated. The Bandelin SONOREX smart ST 514 BH is an ultrasonic bath with heating and a total capacity of 18.7 litres, designed specifically to address this need. Via the touchscreen, power, temperature and cleaning duration can be adjusted in fine increments and saved as a custom programme, ensuring that recurring cleaning cycles can be reproduced consistently at any time. Touchscreen operation with ten programme memories Instead of traditional rotary controls or individual buttons, a touchscreen handles all operation of the ST 514 BH. The ultrasonic power can be adjusted from 10 to 100 % in 1 % increments, the temperature from 20 to 80 °C in 1 K increments, and the timer accepts any value from 1 second to 8 hours in 1-second increments. Up to ten programmes can be saved in the unit using these settings and recalled at the touch of a finger. For example, one programme can be set up for intensive rough cleaning of heavily soiled workpieces and a second for the gentle cleaning of sensitive instruments; both can be recalled at any time without the need for further adjustment. An integrated ECO programme further reduces energy consumption when the bath does not need to be running at full capacity. Powerful ultrasound with DEGAS, Sweep, Pulse and Interval The ultrasonic generator operates at a frequency of 40 kHz with a nominal power of 215 W and a peak power of 860 W. The DEGAS function degasses freshly prepared cleaning fluid before the actual cleaning process, thereby preventing dissolved air bubbles from weakening the cavitation effect. The Sweep function continuously varies the frequency slightly to prevent standing waves in the tank and to achieve a uniform cleaning effect throughout the bath. Pulse and interval modes further adjust the cleaning intensity to suit items of varying sensitivity. Ultrasonic bath with heating: 600 W for constant bath temperatures Many cleaning agents only achieve their full effectiveness at elevated temperatures. The ST 514 BH’s 600 W heater covers a range from 20 to 80 °C, adjustable in 1 K increments, so that the bath temperature can be precisely matched to the cleaning concentrate being used. Drainage is via a G ½ left-hand ball valve, so that the bath can be emptied after cleaning without having to tip it or decant the contents. System bus interface for the DST 01 docking station The ST 514 BH can be connected to the DST 01 docking station via a system bus interface with an M12 connector (4-pin), allowing it to be integrated into networked cleaning processes in which several units are to be operated together. Robust stainless steel design for continuous use The tank and housing are made of 1.4301 stainless steel. The tank is 1.0 mm thick and has internal dimensions of 325 × 300 × 200 mm, with a total capacity of 18.7 litres and a working capacity of 12.5 litres. With external dimensions of 355 × 325 × 350 mm, measured excluding handles and ball valve, and a net weight of 10.3 kg, the unit can be accommodated on any laboratory bench or workbench. Degree of protection IP 32 and protection class I ensure safe operation in everyday use in laboratories, medical practices and workshops. Connection, warranty and delivery The unit is connected via a permanently fitted, 2-metre-long mains cable to a 230 V AC supply (±10 %, 50/60 Hz) with a current consumption of 3.6 A. Bandelin provides a 2-year warranty on the SONOREX smart ST 514 BH; packed ready for dispatch, the unit weighs 12.6 kg with packaging dimensions of 475 × 445 × 465 mm. Successor to the SONOREX DIGIPLUS DL 514 BH, compatible with existing accessories The ST 514 BH is the successor to the now-discontinued SONOREX DIGIPLUS DL 514 BH and features a comparable tank size and performance class. Anyone already using a lid, insert basket, insert tank, insert beaker or insert grid for a 514 model can continue to use these accessories directly on the new ST 514 BH; there is no need to switch to new accessory sizes. Compared to its predecessor, the ST 514 BH features a touchscreen control panel instead of individual buttons, finer power adjustment in 1 % increments rather than 10 %, a freely selectable timer instead of fixed time settings, ten programme memory slots and the system bus interface for the docking station. Typical applications The ST 514 BH is suitable wherever items to be cleaned require thorough yet gentle treatment and where cleaning parameters need to remain reproducible throughout the day: Sample preparation and cleaning of laboratory glassware, cuvettes and small parts in day-to-day laboratory work Pre-treatment of instruments in dental and medical practices prior to further sterilisation Precision cleaning of components, tools and machine parts in industry and workshops Technical details Inner tank dimensions (L×W×D)325 × 300 × 200 mm Tank materialStainless steel 1.4301, thickness 1.0 mm Total capacity18.7 l Working capacity12.5 l Ultrasonic frequency40 kHz Ultrasonic power215 W (nominal), 860 W (peak) Power setting10 to 100 %, in 1 % increments Heating power600 W Temperature range20 to 80 °C, in 1 K increments Timer1 s to 8 h, in 1-s increments Pulsation times1 to 60 s Programme memory10, including ECO programme FunctionsDEGAS, Sweep, Pulse, Interval OperationTouchscreen InterfaceM12 system bus, 4-pin, for DST 01 docking station DrainG ½ left-hand ball valve HousingStainless steel 1.4301 External dimensions (excluding handles/ball valve)355 × 325 × 350 mm Weight (net)10.3 kg Packaging dimensions475 × 445 × 465 mm Shipping weight (gross)12.6 kg Connection230 V~ (±10 %), 50/60 Hz, 3.6 A Mains cable2 m, permanently attached to the unit Degree of protectionIP 32 Protection classI Back-up batteryLithium button cell CR 2032, 3 V ClassificationClass I medical device (MDR 2017/745) ConformityLow Voltage Directive 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU Scope of delivery 1x Bandelin SONOREX smart ST 514 BH ultrasonic bath with heating, stainless steel tank with fixed 2-metre mains cable The lid, insert basket, insert tank, insert beaker, insert grid and the DST 01 docking station are not included in the scope of delivery and are available separately. Regulatory information The device contains a lithium backup battery (CR 2032 button cell, 3 V) for the programme memory. In accordance with the Battery Act, batteries must not be disposed of with household waste. You are legally obliged to return used batteries; this can be done free of charge at local authority collection points and at any shop where batteries of the relevant type are sold. Individual requirements & procurement service We are happy to assist you via our procurement service with lids, insert baskets, insert tanks, insert beakers, insert grids or the DST 01 docking station for the ST 514 BH, as well as with the individual procurement of spare parts or suitable cleaning concentrates.

Manufacturer's RRP: €2,625.00